[PATCH 00/06] ide-atapi: more leftovers

[PATCH 00/06] ide-atapi: more leftovers

[Borislav Petkov]

Hi Bart,

here are the reworked patches of the first batch of ide-cd to generic
conversion. They've been lightly tested with ide-floppy only since the
ide-cd is still needs rewiring after all is moved to ide-atapi.

 drivers/ide/ide-atapi.c  |   94 +++++++++++++++++++++++++++++++++++++--------
 drivers/ide/ide-cd.c     |   42 ++------------------
 drivers/ide/ide-cd.h     |    1 -
 drivers/ide/ide-floppy.c |    2 +-
 drivers/ide/ide-tape.c   |    2 +-
 drivers/scsi/ide-scsi.c  |    2 +-
 include/linux/ide.h      |    7 ++-
 7 files changed, 90 insertions(+), 60 deletions(-)

-- 
Regards/Gruss,
    Boris.

[PATCH 00/06] ide-atapi: more leftovers

[Borislav Petkov]

Hi Bart,

here are the reworked patches of the first batch of ide-cd to generic
conversion. They've been lightly tested with ide-floppy only since the
ide-cd is still needs rewiring after all is moved to ide-atapi.

 drivers/ide/ide-atapi.c  |   94 +++++++++++++++++++++++++++++++++++++--------
 drivers/ide/ide-cd.c     |   42 ++------------------
 drivers/ide/ide-cd.h     |    1 -
 drivers/ide/ide-floppy.c |    2 +-
 drivers/ide/ide-tape.c   |    2 +-
 drivers/scsi/ide-scsi.c  |    2 +-
 include/linux/ide.h      |    7 ++-
 7 files changed, 90 insertions(+), 60 deletions(-)

-- 
Regards/Gruss,
    Boris.

[PATCH 1/6] ide-atapi: add a dev_is_idecd-inline

[Borislav Petkov]

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 4e58b9e..33a1534 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -14,6 +14,12 @@
 #define debug_log(fmt, args...) do {} while (0)
 #endif
 
+static inline int dev_is_idecd(ide_drive_t *drive)
+{
+	return (drive->media == ide_cdrom || drive->media == ide_optical) &&
+		!(drive->dev_flags & IDE_DFLAG_SCSI);
+}
+
 /*
  * Check whether we can support a device,
  * based on the ATAPI IDENTIFY command results.
@@ -577,7 +583,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 
 	if (scsi)
 		tf_flags = 0;
-	else if (drive->media == ide_cdrom || drive->media == ide_optical)
+	else if (dev_is_idecd(drive))
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
 	else
 		tf_flags = IDE_TFLAG_OUT_DEVICE;
-- 
1.6.0.4

[PATCH 1/6] ide-atapi: add a dev_is_idecd-inline

[Borislav Petkov]

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 4e58b9e..33a1534 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -14,6 +14,12 @@
 #define debug_log(fmt, args...) do {} while (0)
 #endif
 
+static inline int dev_is_idecd(ide_drive_t *drive)
+{
+	return (drive->media == ide_cdrom || drive->media == ide_optical) &&
+		!(drive->dev_flags & IDE_DFLAG_SCSI);
+}
+
 /*
  * Check whether we can support a device,
  * based on the ATAPI IDENTIFY command results.
@@ -577,7 +583,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 
 	if (scsi)
 		tf_flags = 0;
-	else if (drive->media == ide_cdrom || drive->media == ide_optical)
+	else if (dev_is_idecd(drive))
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
 	else
 		tf_flags = IDE_TFLAG_OUT_DEVICE;
-- 
1.6.0.4

[PATCH 2/6] ide-atapi: combine drive-specific assignments

[Borislav Petkov]

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |   23 +++++++++++------------
 1 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 33a1534..b6e0aac 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -551,18 +551,24 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	struct ide_atapi_pc *pc = drive->pc;
 	ide_hwif_t *hwif = drive->hwif;
 	u32 tf_flags;
-	u16 bcount;
+	u16 bcount = 0;
 	u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
 
 	/* We haven't transferred any data yet */
 	pc->xferred = 0;
 	pc->cur_pos = pc->buf;
 
-	/* Request to transfer the entire buffer at once */
-	if (drive->media == ide_tape && scsi == 0)
-		bcount = pc->req_xfer;
-	else
+	if (dev_is_idecd(drive)) {
+		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+	} else if (scsi) {
+		tf_flags = 0;
 		bcount = min(pc->req_xfer, 63 * 1024);
+	} else {
+		tf_flags = IDE_TFLAG_OUT_DEVICE;
+		bcount = ((drive->media == ide_tape) ?
+				pc->req_xfer :
+				min(pc->req_xfer, 63 * 1024));
+	}
 
 	if (pc->flags & PC_FLAG_DMA_ERROR) {
 		pc->flags &= ~PC_FLAG_DMA_ERROR;
@@ -581,13 +587,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	if (!drive->dma)
 		pc->flags &= ~PC_FLAG_DMA_OK;
 
-	if (scsi)
-		tf_flags = 0;
-	else if (dev_is_idecd(drive))
-		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
-	else
-		tf_flags = IDE_TFLAG_OUT_DEVICE;
-
 	ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma);
 
 	/* Issue the packet command */
-- 
1.6.0.4

[PATCH 2/6] ide-atapi: combine drive-specific assignments

[Borislav Petkov]

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |   23 +++++++++++------------
 1 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 33a1534..b6e0aac 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -551,18 +551,24 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	struct ide_atapi_pc *pc = drive->pc;
 	ide_hwif_t *hwif = drive->hwif;
 	u32 tf_flags;
-	u16 bcount;
+	u16 bcount = 0;
 	u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
 
 	/* We haven't transferred any data yet */
 	pc->xferred = 0;
 	pc->cur_pos = pc->buf;
 
-	/* Request to transfer the entire buffer at once */
-	if (drive->media == ide_tape && scsi == 0)
-		bcount = pc->req_xfer;
-	else
+	if (dev_is_idecd(drive)) {
+		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+	} else if (scsi) {
+		tf_flags = 0;
 		bcount = min(pc->req_xfer, 63 * 1024);
+	} else {
+		tf_flags = IDE_TFLAG_OUT_DEVICE;
+		bcount = ((drive->media == ide_tape) ?
+				pc->req_xfer :
+				min(pc->req_xfer, 63 * 1024));
+	}
 
 	if (pc->flags & PC_FLAG_DMA_ERROR) {
 		pc->flags &= ~PC_FLAG_DMA_ERROR;
@@ -581,13 +587,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	if (!drive->dma)
 		pc->flags &= ~PC_FLAG_DMA_OK;
 
-	if (scsi)
-		tf_flags = 0;
-	else if (dev_is_idecd(drive))
-		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
-	else
-		tf_flags = IDE_TFLAG_OUT_DEVICE;
-
 	ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma);
 
 	/* Issue the packet command */
-- 
1.6.0.4

[PATCH 3/6] ide-atapi: accomodate transfer length calculation for ide-cd

[Borislav Petkov]

... by factoring it out of ide_cd_do_request() into a helper, as suggested by
Bart.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |   15 ++++++++++++++-
 drivers/ide/ide-cd.c    |    4 ++--
 include/linux/ide.h     |    2 ++
 3 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index b6e0aac..7162317 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -252,6 +252,18 @@ int ide_scsi_expiry(ide_drive_t *drive)
 }
 EXPORT_SYMBOL_GPL(ide_scsi_expiry);
 
+int ide_cd_get_xferlen(struct request *rq)
+{
+	if (blk_fs_request(rq))
+		return 32768;
+	else if (blk_sense_request(rq) || blk_pc_request(rq) ||
+			 rq->cmd_type == REQ_TYPE_ATA_PC)
+		return rq->data_len;
+	else
+		return 0;
+}
+EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
+
 /*
  * This is the usual interrupt handler which will be called during a packet
  * command.  We will transfer some of the data (as requested by the drive)
@@ -551,7 +563,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	struct ide_atapi_pc *pc = drive->pc;
 	ide_hwif_t *hwif = drive->hwif;
 	u32 tf_flags;
-	u16 bcount = 0;
+	u16 bcount;
 	u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
 
 	/* We haven't transferred any data yet */
@@ -560,6 +572,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 
 	if (dev_is_idecd(drive)) {
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+		bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
 	} else if (scsi) {
 		tf_flags = 0;
 		bcount = min(pc->req_xfer, 63 * 1024);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 65e5513..8d3c771 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1214,8 +1214,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		      __func__, rq->cmd[0], rq->cmd_type,
 		      (unsigned long long)block);
 
+	xferlen = ide_cd_get_xferlen(rq);
+
 	if (blk_fs_request(rq)) {
-		xferlen = 32768;
 		fn = cdrom_start_rw_cont;
 
 		if (cdrom_start_rw(drive, rq) == ide_stopped)
@@ -1225,7 +1226,6 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 			return ide_stopped;
 	} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
 		   rq->cmd_type == REQ_TYPE_ATA_PC) {
-		xferlen = rq->data_len;
 		fn = cdrom_do_newpc_cont;
 
 		if (!rq->timeout)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index eb4c01f..e35ff68 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1254,6 +1254,8 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
 
 int ide_scsi_expiry(ide_drive_t *);
 
+int ide_cd_get_xferlen(struct request *);
+
 ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
 
 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
-- 
1.6.0.4

[PATCH 3/6] ide-atapi: accomodate transfer length calculation for ide-cd

[Borislav Petkov]

... by factoring it out of ide_cd_do_request() into a helper, as suggested by
Bart.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |   15 ++++++++++++++-
 drivers/ide/ide-cd.c    |    4 ++--
 include/linux/ide.h     |    2 ++
 3 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index b6e0aac..7162317 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -252,6 +252,18 @@ int ide_scsi_expiry(ide_drive_t *drive)
 }
 EXPORT_SYMBOL_GPL(ide_scsi_expiry);
 
+int ide_cd_get_xferlen(struct request *rq)
+{
+	if (blk_fs_request(rq))
+		return 32768;
+	else if (blk_sense_request(rq) || blk_pc_request(rq) ||
+			 rq->cmd_type == REQ_TYPE_ATA_PC)
+		return rq->data_len;
+	else
+		return 0;
+}
+EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
+
 /*
  * This is the usual interrupt handler which will be called during a packet
  * command.  We will transfer some of the data (as requested by the drive)
@@ -551,7 +563,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	struct ide_atapi_pc *pc = drive->pc;
 	ide_hwif_t *hwif = drive->hwif;
 	u32 tf_flags;
-	u16 bcount = 0;
+	u16 bcount;
 	u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
 
 	/* We haven't transferred any data yet */
@@ -560,6 +572,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 
 	if (dev_is_idecd(drive)) {
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+		bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
 	} else if (scsi) {
 		tf_flags = 0;
 		bcount = min(pc->req_xfer, 63 * 1024);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 65e5513..8d3c771 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1214,8 +1214,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		      __func__, rq->cmd[0], rq->cmd_type,
 		      (unsigned long long)block);
 
+	xferlen = ide_cd_get_xferlen(rq);
+
 	if (blk_fs_request(rq)) {
-		xferlen = 32768;
 		fn = cdrom_start_rw_cont;
 
 		if (cdrom_start_rw(drive, rq) == ide_stopped)
@@ -1225,7 +1226,6 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 			return ide_stopped;
 	} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
 		   rq->cmd_type == REQ_TYPE_ATA_PC) {
-		xferlen = rq->data_len;
 		fn = cdrom_do_newpc_cont;
 
 		if (!rq->timeout)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index eb4c01f..e35ff68 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1254,6 +1254,8 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
 
 int ide_scsi_expiry(ide_drive_t *);
 
+int ide_cd_get_xferlen(struct request *);
+
 ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
 
 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
-- 
1.6.0.4

[PATCH 4/6] ide-atapi: setup dma for ide-cd

[Borislav Petkov]

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 7162317..8884877 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -588,8 +588,9 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 		ide_dma_off(drive);
 	}
 
-	if ((pc->flags & PC_FLAG_DMA_OK) &&
-	    (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
+	if (((pc->flags & PC_FLAG_DMA_OK) &&
+		(drive->dev_flags & IDE_DFLAG_USING_DMA)) ||
+	    drive->dma) {
 		if (scsi)
 			hwif->sg_mapped = 1;
 		drive->dma = !hwif->dma_ops->dma_setup(drive);
-- 
1.6.0.4

[PATCH 4/6] ide-atapi: setup dma for ide-cd

[Borislav Petkov]

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 7162317..8884877 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -588,8 +588,9 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 		ide_dma_off(drive);
 	}
 
-	if ((pc->flags & PC_FLAG_DMA_OK) &&
-	    (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
+	if (((pc->flags & PC_FLAG_DMA_OK) &&
+		(drive->dev_flags & IDE_DFLAG_USING_DMA)) ||
+	    drive->dma) {
 		if (scsi)
 			hwif->sg_mapped = 1;
 		drive->dma = !hwif->dma_ops->dma_setup(drive);
-- 
1.6.0.4

[PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c

[Borislav Petkov]

- cdrom_timer_expiry -> ide_cd_expiry
- remove expiry-arg to ide_issue_pc as it is redundant now

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c  |   42 ++++++++++++++++++++++++++++++++++++++----
 drivers/ide/ide-cd.c     |   38 +++-----------------------------------
 drivers/ide/ide-cd.h     |    1 -
 drivers/ide/ide-floppy.c |    2 +-
 drivers/ide/ide-tape.c   |    2 +-
 drivers/scsi/ide-scsi.c  |    2 +-
 include/linux/ide.h      |    5 +++--
 7 files changed, 47 insertions(+), 45 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8884877..bb867a0 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/cdrom.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <scsi/scsi.h>
@@ -250,7 +251,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
 
 	return 0; /* we do not want the IDE subsystem to retry */
 }
-EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+
+int ide_cd_expiry(ide_drive_t *drive)
+{
+	struct request *rq = HWGROUP(drive)->rq;
+	unsigned long wait = 0;
+
+	debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
+
+	/*
+	 * Some commands are *slow* and normally take a long time to complete.
+	 * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+	 * commands/drives support that. Let ide_timer_expiry keep polling us
+	 * for these.
+	 */
+	switch (rq->cmd[0]) {
+	case GPCMD_BLANK:
+	case GPCMD_FORMAT_UNIT:
+	case GPCMD_RESERVE_RZONE_TRACK:
+	case GPCMD_CLOSE_TRACK:
+	case GPCMD_FLUSH_CACHE:
+		wait = ATAPI_WAIT_PC;
+		break;
+	default:
+		if (!(rq->cmd_flags & REQ_QUIET))
+			printk(KERN_INFO "cmd 0x%x timed out\n",
+					 rq->cmd[0]);
+		wait = 0;
+		break;
+	}
+	return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
 
 int ide_cd_get_xferlen(struct request *rq)
 {
@@ -557,11 +589,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 	return ide_started;
 }
 
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
-			     ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
 {
 	struct ide_atapi_pc *pc = drive->pc;
 	ide_hwif_t *hwif = drive->hwif;
+	ide_expiry_t *expiry = NULL;
 	u32 tf_flags;
 	u16 bcount;
 	u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
@@ -573,9 +605,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	if (dev_is_idecd(drive)) {
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
 		bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+		expiry = ide_cd_expiry;
 	} else if (scsi) {
 		tf_flags = 0;
 		bcount = min(pc->req_xfer, 63 * 1024);
+		expiry = ide_scsi_expiry;
 	} else {
 		tf_flags = IDE_TFLAG_OUT_DEVICE;
 		bcount = ((drive->media == ide_tape) ?
@@ -606,7 +640,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	/* Issue the packet command */
 	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
 		ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
-				    timeout, NULL);
+				    timeout, expiry);
 		return ide_started;
 	} else {
 		ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8d3c771..105e4d8 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -511,38 +511,6 @@ end_request:
 	return 1;
 }
 
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
-	struct request *rq = HWGROUP(drive)->rq;
-	unsigned long wait = 0;
-
-	ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
-		      rq->cmd[0]);
-
-	/*
-	 * Some commands are *slow* and normally take a long time to complete.
-	 * Usually we can use the ATAPI "disconnect" to bypass this, but not all
-	 * commands/drives support that. Let ide_timer_expiry keep polling us
-	 * for these.
-	 */
-	switch (rq->cmd[0]) {
-	case GPCMD_BLANK:
-	case GPCMD_FORMAT_UNIT:
-	case GPCMD_RESERVE_RZONE_TRACK:
-	case GPCMD_CLOSE_TRACK:
-	case GPCMD_FLUSH_CACHE:
-		wait = ATAPI_WAIT_PC;
-		break;
-	default:
-		if (!(rq->cmd_flags & REQ_QUIET))
-			printk(KERN_INFO PFX "cmd 0x%x timed out\n",
-					 rq->cmd[0]);
-		wait = 0;
-		break;
-	}
-	return wait;
-}
-
 /*
  * Set up the device registers for transferring a packet command on DEV,
  * expecting to later transfer XFERLEN bytes.  HANDLER is the routine
@@ -574,7 +542,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
 
 		/* packet command */
 		ide_execute_command(drive, ATA_CMD_PACKET, handler,
-				    ATAPI_WAIT_PC, cdrom_timer_expiry);
+				    ATAPI_WAIT_PC, ide_cd_expiry);
 		return ide_started;
 	} else {
 		ide_execute_pkt_cmd(drive);
@@ -621,7 +589,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
 	}
 
 	/* arm the interrupt handler */
-	ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+	ide_set_handler(drive, handler, rq->timeout, ide_cd_expiry);
 
 	/* ATAPI commands get padded out to 12 bytes minimum */
 	cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -1088,7 +1056,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 	} else {
 		timeout = ATAPI_WAIT_PC;
 		if (!blk_fs_request(rq))
-			expiry = cdrom_timer_expiry;
+			expiry = ide_cd_expiry;
 	}
 
 	ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 389faa4..a7a4d00 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -19,7 +19,6 @@
 /*
  * typical timeout for packet command
  */
-#define ATAPI_WAIT_PC		(60 * HZ)
 #define ATAPI_WAIT_WRITE_BUSY	(10 * HZ)
 
 /************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1f07f38..fdec729 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 
 	pc->retries++;
 
-	return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+	return ide_issue_pc(drive, WAIT_FLOPPY_CMD);
 }
 
 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470e..ac9e29a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 
 	pc->retries++;
 
-	return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+	return ide_issue_pc(drive, WAIT_TAPE_CMD);
 }
 
 /* A mode sense command is used to "sense" tape parameters. */
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index c24140a..7890718 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -315,7 +315,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
 	/* Set the current packet command */
 	drive->pc = pc;
 
-	return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry);
+	return ide_issue_pc(drive, ide_scsi_get_timeout(pc));
 }
 
 /*
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e35ff68..7fce92a 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -396,6 +396,7 @@ enum {
  * This is used for several packet commands (not for READ/WRITE commands).
  */
 #define IDE_PC_BUFFER_SIZE	256
+#define ATAPI_WAIT_PC		(60 * HZ)
 
 struct ide_atapi_pc {
 	/* actual packet bytes */
@@ -1252,11 +1253,11 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
 	return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
 }
 
-int ide_scsi_expiry(ide_drive_t *);
+int ide_cd_expiry(ide_drive_t *);
 
 int ide_cd_get_xferlen(struct request *);
 
-ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int);
 
 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
 
-- 
1.6.0.4

[PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c

[Borislav Petkov]

- cdrom_timer_expiry -> ide_cd_expiry
- remove expiry-arg to ide_issue_pc as it is redundant now

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c  |   42 ++++++++++++++++++++++++++++++++++++++----
 drivers/ide/ide-cd.c     |   38 +++-----------------------------------
 drivers/ide/ide-cd.h     |    1 -
 drivers/ide/ide-floppy.c |    2 +-
 drivers/ide/ide-tape.c   |    2 +-
 drivers/scsi/ide-scsi.c  |    2 +-
 include/linux/ide.h      |    5 +++--
 7 files changed, 47 insertions(+), 45 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8884877..bb867a0 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/cdrom.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <scsi/scsi.h>
@@ -250,7 +251,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
 
 	return 0; /* we do not want the IDE subsystem to retry */
 }
-EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+
+int ide_cd_expiry(ide_drive_t *drive)
+{
+	struct request *rq = HWGROUP(drive)->rq;
+	unsigned long wait = 0;
+
+	debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
+
+	/*
+	 * Some commands are *slow* and normally take a long time to complete.
+	 * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+	 * commands/drives support that. Let ide_timer_expiry keep polling us
+	 * for these.
+	 */
+	switch (rq->cmd[0]) {
+	case GPCMD_BLANK:
+	case GPCMD_FORMAT_UNIT:
+	case GPCMD_RESERVE_RZONE_TRACK:
+	case GPCMD_CLOSE_TRACK:
+	case GPCMD_FLUSH_CACHE:
+		wait = ATAPI_WAIT_PC;
+		break;
+	default:
+		if (!(rq->cmd_flags & REQ_QUIET))
+			printk(KERN_INFO "cmd 0x%x timed out\n",
+					 rq->cmd[0]);
+		wait = 0;
+		break;
+	}
+	return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
 
 int ide_cd_get_xferlen(struct request *rq)
 {
@@ -557,11 +589,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 	return ide_started;
 }
 
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
-			     ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
 {
 	struct ide_atapi_pc *pc = drive->pc;
 	ide_hwif_t *hwif = drive->hwif;
+	ide_expiry_t *expiry = NULL;
 	u32 tf_flags;
 	u16 bcount;
 	u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
@@ -573,9 +605,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	if (dev_is_idecd(drive)) {
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
 		bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+		expiry = ide_cd_expiry;
 	} else if (scsi) {
 		tf_flags = 0;
 		bcount = min(pc->req_xfer, 63 * 1024);
+		expiry = ide_scsi_expiry;
 	} else {
 		tf_flags = IDE_TFLAG_OUT_DEVICE;
 		bcount = ((drive->media == ide_tape) ?
@@ -606,7 +640,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	/* Issue the packet command */
 	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
 		ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
-				    timeout, NULL);
+				    timeout, expiry);
 		return ide_started;
 	} else {
 		ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8d3c771..105e4d8 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -511,38 +511,6 @@ end_request:
 	return 1;
 }
 
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
-	struct request *rq = HWGROUP(drive)->rq;
-	unsigned long wait = 0;
-
-	ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
-		      rq->cmd[0]);
-
-	/*
-	 * Some commands are *slow* and normally take a long time to complete.
-	 * Usually we can use the ATAPI "disconnect" to bypass this, but not all
-	 * commands/drives support that. Let ide_timer_expiry keep polling us
-	 * for these.
-	 */
-	switch (rq->cmd[0]) {
-	case GPCMD_BLANK:
-	case GPCMD_FORMAT_UNIT:
-	case GPCMD_RESERVE_RZONE_TRACK:
-	case GPCMD_CLOSE_TRACK:
-	case GPCMD_FLUSH_CACHE:
-		wait = ATAPI_WAIT_PC;
-		break;
-	default:
-		if (!(rq->cmd_flags & REQ_QUIET))
-			printk(KERN_INFO PFX "cmd 0x%x timed out\n",
-					 rq->cmd[0]);
-		wait = 0;
-		break;
-	}
-	return wait;
-}
-
 /*
  * Set up the device registers for transferring a packet command on DEV,
  * expecting to later transfer XFERLEN bytes.  HANDLER is the routine
@@ -574,7 +542,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
 
 		/* packet command */
 		ide_execute_command(drive, ATA_CMD_PACKET, handler,
-				    ATAPI_WAIT_PC, cdrom_timer_expiry);
+				    ATAPI_WAIT_PC, ide_cd_expiry);
 		return ide_started;
 	} else {
 		ide_execute_pkt_cmd(drive);
@@ -621,7 +589,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
 	}
 
 	/* arm the interrupt handler */
-	ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+	ide_set_handler(drive, handler, rq->timeout, ide_cd_expiry);
 
 	/* ATAPI commands get padded out to 12 bytes minimum */
 	cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -1088,7 +1056,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 	} else {
 		timeout = ATAPI_WAIT_PC;
 		if (!blk_fs_request(rq))
-			expiry = cdrom_timer_expiry;
+			expiry = ide_cd_expiry;
 	}
 
 	ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 389faa4..a7a4d00 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -19,7 +19,6 @@
 /*
  * typical timeout for packet command
  */
-#define ATAPI_WAIT_PC		(60 * HZ)
 #define ATAPI_WAIT_WRITE_BUSY	(10 * HZ)
 
 /************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1f07f38..fdec729 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 
 	pc->retries++;
 
-	return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+	return ide_issue_pc(drive, WAIT_FLOPPY_CMD);
 }
 
 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470e..ac9e29a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 
 	pc->retries++;
 
-	return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+	return ide_issue_pc(drive, WAIT_TAPE_CMD);
 }
 
 /* A mode sense command is used to "sense" tape parameters. */
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index c24140a..7890718 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -315,7 +315,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
 	/* Set the current packet command */
 	drive->pc = pc;
 
-	return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry);
+	return ide_issue_pc(drive, ide_scsi_get_timeout(pc));
 }
 
 /*
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e35ff68..7fce92a 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -396,6 +396,7 @@ enum {
  * This is used for several packet commands (not for READ/WRITE commands).
  */
 #define IDE_PC_BUFFER_SIZE	256
+#define ATAPI_WAIT_PC		(60 * HZ)
 
 struct ide_atapi_pc {
 	/* actual packet bytes */
@@ -1252,11 +1253,11 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
 	return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
 }
 
-int ide_scsi_expiry(ide_drive_t *);
+int ide_cd_expiry(ide_drive_t *);
 
 int ide_cd_get_xferlen(struct request *);
 
-ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int);
 
 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
 
-- 
1.6.0.4

[PATCH 6/6] ide-atapi: teach ide atapi about drive->waiting_for_dma

[Borislav Petkov]

In addition, we wait for DRQ to be asserted by repeatedly polling
device status no matter what DRQ type each device implements.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index bb867a0..a43bed3 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -543,6 +543,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 		return startstop;
 	}
 
+	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+		if (drive->dma)
+			drive->waiting_for_dma = 1;
+	}
+
 	ireason = ide_read_ireason(drive);
 	if (drive->media == ide_tape &&
 	    (drive->dev_flags & IDE_DFLAG_SCSI) == 0)
@@ -639,6 +644,8 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
 
 	/* Issue the packet command */
 	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+		if (drive->dma)
+			drive->waiting_for_dma = 0;
 		ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
 				    timeout, expiry);
 		return ide_started;
-- 
1.6.0.4

[PATCH 6/6] ide-atapi: teach ide atapi about drive->waiting_for_dma

[Borislav Petkov]

In addition, we wait for DRQ to be asserted by repeatedly polling
device status no matter what DRQ type each device implements.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index bb867a0..a43bed3 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -543,6 +543,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 		return startstop;
 	}
 
+	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+		if (drive->dma)
+			drive->waiting_for_dma = 1;
+	}
+
 	ireason = ide_read_ireason(drive);
 	if (drive->media == ide_tape &&
 	    (drive->dev_flags & IDE_DFLAG_SCSI) == 0)
@@ -639,6 +644,8 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
 
 	/* Issue the packet command */
 	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+		if (drive->dma)
+			drive->waiting_for_dma = 0;
 		ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
 				    timeout, expiry);
 		return ide_started;
-- 
1.6.0.4

Re: [PATCH 00/06] ide-atapi: more leftovers

[Bartlomiej Zolnierkiewicz]

On Thursday 04 December 2008, Borislav Petkov wrote:
> Hi Bart,
> 
> here are the reworked patches of the first batch of ide-cd to generic
> conversion. They've been lightly tested with ide-floppy only since the
> ide-cd is still needs rewiring after all is moved to ide-atapi.

Thanks, I applied everything except patch #5 (which needs fixup because
it goes too far into the future ;-).

Re: [PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c

[Bartlomiej Zolnierkiewicz]

On Thursday 04 December 2008, Borislav Petkov wrote:
> - cdrom_timer_expiry -> ide_cd_expiry
> - remove expiry-arg to ide_issue_pc as it is redundant now
> 
> There should be no functionality change resulting from this patch.

Well, there is a minor change actually: ide_debug_log -> debug_log.

> @@ -250,7 +251,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
>  
>  	return 0; /* we do not want the IDE subsystem to retry */
>  }
> -EXPORT_SYMBOL_GPL(ide_scsi_expiry);

This seems to remove the symbol accidentally and although I've
just applied patch doing scheduled ide-scsi removal it would be
much better to take care of the core code's ide-scsi remnants
in separate patch(es).

> @@ -19,7 +19,6 @@
>  /*
>   * typical timeout for packet command
>   */
> -#define ATAPI_WAIT_PC		(60 * HZ)
>  #define ATAPI_WAIT_WRITE_BUSY	(10 * HZ)

The comment should be moved together with ATAPI_WAIT_PC define
(or removed).

The rest of the patch is fine.

Re: [PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c

[Borislav Petkov]

> This seems to remove the symbol accidentally and although I've
> just applied patch doing scheduled ide-scsi removal it would be
> much better to take care of the core code's ide-scsi remnants
> in separate patch(es).

... patches coming up...

> > @@ -19,7 +19,6 @@
> >  /*
> >   * typical timeout for packet command
> >   */
> > -#define ATAPI_WAIT_PC		(60 * HZ)
> >  #define ATAPI_WAIT_WRITE_BUSY	(10 * HZ)
> 
> The comment should be moved together with ATAPI_WAIT_PC define
> (or removed).
> 
> The rest of the patch is fine.

here is a v2:
---
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sat, 6 Dec 2008 20:08:35 +0100
Subject: [PATCH] ide-cd: move cdrom_timer_expiry to ide-atapi.c

- cdrom_timer_expiry -> ide_cd_expiry
- remove expiry-arg to ide_issue_pc as it is redundant now
- ide_debug_log -> debug_log

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c  |   41 ++++++++++++++++++++++++++++++++++++++---
 drivers/ide/ide-cd.c     |   38 +++-----------------------------------
 drivers/ide/ide-cd.h     |    4 ----
 drivers/ide/ide-floppy.c |    2 +-
 drivers/ide/ide-tape.c   |    2 +-
 include/linux/ide.h      |    4 +++-
 6 files changed, 46 insertions(+), 45 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8c5cf68..c110329 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/cdrom.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <scsi/scsi.h>
@@ -252,6 +253,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
 }
 EXPORT_SYMBOL_GPL(ide_scsi_expiry);
 
+int ide_cd_expiry(ide_drive_t *drive)
+{
+	struct request *rq = HWGROUP(drive)->rq;
+	unsigned long wait = 0;
+
+	debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
+
+	/*
+	 * Some commands are *slow* and normally take a long time to complete.
+	 * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+	 * commands/drives support that. Let ide_timer_expiry keep polling us
+	 * for these.
+	 */
+	switch (rq->cmd[0]) {
+	case GPCMD_BLANK:
+	case GPCMD_FORMAT_UNIT:
+	case GPCMD_RESERVE_RZONE_TRACK:
+	case GPCMD_CLOSE_TRACK:
+	case GPCMD_FLUSH_CACHE:
+		wait = ATAPI_WAIT_PC;
+		break;
+	default:
+		if (!(rq->cmd_flags & REQ_QUIET))
+			printk(KERN_INFO "cmd 0x%x timed out\n",
+					 rq->cmd[0]);
+		wait = 0;
+		break;
+	}
+	return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
+
 int ide_cd_get_xferlen(struct request *rq)
 {
 	if (blk_fs_request(rq))
@@ -562,11 +595,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 	return ide_started;
 }
 
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
-			     ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
 {
 	struct ide_atapi_pc *pc = drive->pc;
 	ide_hwif_t *hwif = drive->hwif;
+	ide_expiry_t *expiry = NULL;
 	u32 tf_flags;
 	u16 bcount;
 	u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
@@ -578,9 +611,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	if (dev_is_idecd(drive)) {
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
 		bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+		expiry = ide_cd_expiry;
 	} else if (scsi) {
 		tf_flags = 0;
 		bcount = min(pc->req_xfer, 63 * 1024);
+		expiry = ide_scsi_expiry;
 	} else {
 		tf_flags = IDE_TFLAG_OUT_DEVICE;
 		bcount = ((drive->media == ide_tape) ?
@@ -613,7 +648,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 		if (drive->dma)
 			drive->waiting_for_dma = 0;
 		ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
-				    timeout, NULL);
+				    timeout, expiry);
 		return ide_started;
 	} else {
 		ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8d3c771..105e4d8 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -511,38 +511,6 @@ end_request:
 	return 1;
 }
 
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
-	struct request *rq = HWGROUP(drive)->rq;
-	unsigned long wait = 0;
-
-	ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
-		      rq->cmd[0]);
-
-	/*
-	 * Some commands are *slow* and normally take a long time to complete.
-	 * Usually we can use the ATAPI "disconnect" to bypass this, but not all
-	 * commands/drives support that. Let ide_timer_expiry keep polling us
-	 * for these.
-	 */
-	switch (rq->cmd[0]) {
-	case GPCMD_BLANK:
-	case GPCMD_FORMAT_UNIT:
-	case GPCMD_RESERVE_RZONE_TRACK:
-	case GPCMD_CLOSE_TRACK:
-	case GPCMD_FLUSH_CACHE:
-		wait = ATAPI_WAIT_PC;
-		break;
-	default:
-		if (!(rq->cmd_flags & REQ_QUIET))
-			printk(KERN_INFO PFX "cmd 0x%x timed out\n",
-					 rq->cmd[0]);
-		wait = 0;
-		break;
-	}
-	return wait;
-}
-
 /*
  * Set up the device registers for transferring a packet command on DEV,
  * expecting to later transfer XFERLEN bytes.  HANDLER is the routine
@@ -574,7 +542,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
 
 		/* packet command */
 		ide_execute_command(drive, ATA_CMD_PACKET, handler,
-				    ATAPI_WAIT_PC, cdrom_timer_expiry);
+				    ATAPI_WAIT_PC, ide_cd_expiry);
 		return ide_started;
 	} else {
 		ide_execute_pkt_cmd(drive);
@@ -621,7 +589,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
 	}
 
 	/* arm the interrupt handler */
-	ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+	ide_set_handler(drive, handler, rq->timeout, ide_cd_expiry);
 
 	/* ATAPI commands get padded out to 12 bytes minimum */
 	cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -1088,7 +1056,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 	} else {
 		timeout = ATAPI_WAIT_PC;
 		if (!blk_fs_request(rq))
-			expiry = cdrom_timer_expiry;
+			expiry = ide_cd_expiry;
 	}
 
 	ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 389faa4..bf676b2 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -16,10 +16,6 @@
 #define ide_debug_log(lvl, fmt, args...) do {} while (0)
 #endif
 
-/*
- * typical timeout for packet command
- */
-#define ATAPI_WAIT_PC		(60 * HZ)
 #define ATAPI_WAIT_WRITE_BUSY	(10 * HZ)
 
 /************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1f07f38..fdec729 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 
 	pc->retries++;
 
-	return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+	return ide_issue_pc(drive, WAIT_FLOPPY_CMD);
 }
 
 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470e..ac9e29a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 
 	pc->retries++;
 
-	return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+	return ide_issue_pc(drive, WAIT_TAPE_CMD);
 }
 
 /* A mode sense command is used to "sense" tape parameters. */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e35ff68..e20e0b5 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -396,6 +396,7 @@ enum {
  * This is used for several packet commands (not for READ/WRITE commands).
  */
 #define IDE_PC_BUFFER_SIZE	256
+#define ATAPI_WAIT_PC		(60 * HZ)
 
 struct ide_atapi_pc {
 	/* actual packet bytes */
@@ -1253,10 +1254,11 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
 }
 
 int ide_scsi_expiry(ide_drive_t *);
+int ide_cd_expiry(ide_drive_t *);
 
 int ide_cd_get_xferlen(struct request *);
 
-ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int);
 
 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
 
-- 
1.6.0.4

-- 
Regards/Gruss,
    Boris.

Re: [PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c

[Bartlomiej Zolnierkiewicz]

On Saturday 06 December 2008, Borislav Petkov wrote:

> here is a v2:
> ---
> From: Borislav Petkov <petkovbb@gmail.com>
> Date: Sat, 6 Dec 2008 20:08:35 +0100
> Subject: [PATCH] ide-cd: move cdrom_timer_expiry to ide-atapi.c
> 
> - cdrom_timer_expiry -> ide_cd_expiry
> - remove expiry-arg to ide_issue_pc as it is redundant now
> - ide_debug_log -> debug_log
> 
> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>

applied, thanks