* [PATCH 00/06] ide-atapi: more leftovers
@ 2008-12-04 6:43 ` Borislav Petkov
0 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide
Hi Bart,
here are the reworked patches of the first batch of ide-cd to generic
conversion. They've been lightly tested with ide-floppy only since the
ide-cd is still needs rewiring after all is moved to ide-atapi.
drivers/ide/ide-atapi.c | 94 +++++++++++++++++++++++++++++++++++++--------
drivers/ide/ide-cd.c | 42 ++------------------
drivers/ide/ide-cd.h | 1 -
drivers/ide/ide-floppy.c | 2 +-
drivers/ide/ide-tape.c | 2 +-
drivers/scsi/ide-scsi.c | 2 +-
include/linux/ide.h | 7 ++-
7 files changed, 90 insertions(+), 60 deletions(-)
--
Regards/Gruss,
Boris.
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 1/6] ide-atapi: add a dev_is_idecd-inline
2008-12-04 6:43 ` Borislav Petkov
@ 2008-12-04 6:43 ` Borislav Petkov
-1 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 4e58b9e..33a1534 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -14,6 +14,12 @@
#define debug_log(fmt, args...) do {} while (0)
#endif
+static inline int dev_is_idecd(ide_drive_t *drive)
+{
+ return (drive->media == ide_cdrom || drive->media == ide_optical) &&
+ !(drive->dev_flags & IDE_DFLAG_SCSI);
+}
+
/*
* Check whether we can support a device,
* based on the ATAPI IDENTIFY command results.
@@ -577,7 +583,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (scsi)
tf_flags = 0;
- else if (drive->media == ide_cdrom || drive->media == ide_optical)
+ else if (dev_is_idecd(drive))
tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
else
tf_flags = IDE_TFLAG_OUT_DEVICE;
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 1/6] ide-atapi: add a dev_is_idecd-inline
@ 2008-12-04 6:43 ` Borislav Petkov
0 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 4e58b9e..33a1534 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -14,6 +14,12 @@
#define debug_log(fmt, args...) do {} while (0)
#endif
+static inline int dev_is_idecd(ide_drive_t *drive)
+{
+ return (drive->media == ide_cdrom || drive->media == ide_optical) &&
+ !(drive->dev_flags & IDE_DFLAG_SCSI);
+}
+
/*
* Check whether we can support a device,
* based on the ATAPI IDENTIFY command results.
@@ -577,7 +583,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (scsi)
tf_flags = 0;
- else if (drive->media == ide_cdrom || drive->media == ide_optical)
+ else if (dev_is_idecd(drive))
tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
else
tf_flags = IDE_TFLAG_OUT_DEVICE;
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/6] ide-atapi: combine drive-specific assignments
2008-12-04 6:43 ` Borislav Petkov
@ 2008-12-04 6:43 ` Borislav Petkov
-1 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 23 +++++++++++------------
1 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 33a1534..b6e0aac 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -551,18 +551,24 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
u32 tf_flags;
- u16 bcount;
+ u16 bcount = 0;
u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
/* We haven't transferred any data yet */
pc->xferred = 0;
pc->cur_pos = pc->buf;
- /* Request to transfer the entire buffer at once */
- if (drive->media == ide_tape && scsi == 0)
- bcount = pc->req_xfer;
- else
+ if (dev_is_idecd(drive)) {
+ tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+ } else if (scsi) {
+ tf_flags = 0;
bcount = min(pc->req_xfer, 63 * 1024);
+ } else {
+ tf_flags = IDE_TFLAG_OUT_DEVICE;
+ bcount = ((drive->media == ide_tape) ?
+ pc->req_xfer :
+ min(pc->req_xfer, 63 * 1024));
+ }
if (pc->flags & PC_FLAG_DMA_ERROR) {
pc->flags &= ~PC_FLAG_DMA_ERROR;
@@ -581,13 +587,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (!drive->dma)
pc->flags &= ~PC_FLAG_DMA_OK;
- if (scsi)
- tf_flags = 0;
- else if (dev_is_idecd(drive))
- tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
- else
- tf_flags = IDE_TFLAG_OUT_DEVICE;
-
ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma);
/* Issue the packet command */
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 2/6] ide-atapi: combine drive-specific assignments
@ 2008-12-04 6:43 ` Borislav Petkov
0 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 23 +++++++++++------------
1 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 33a1534..b6e0aac 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -551,18 +551,24 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
u32 tf_flags;
- u16 bcount;
+ u16 bcount = 0;
u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
/* We haven't transferred any data yet */
pc->xferred = 0;
pc->cur_pos = pc->buf;
- /* Request to transfer the entire buffer at once */
- if (drive->media == ide_tape && scsi == 0)
- bcount = pc->req_xfer;
- else
+ if (dev_is_idecd(drive)) {
+ tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+ } else if (scsi) {
+ tf_flags = 0;
bcount = min(pc->req_xfer, 63 * 1024);
+ } else {
+ tf_flags = IDE_TFLAG_OUT_DEVICE;
+ bcount = ((drive->media == ide_tape) ?
+ pc->req_xfer :
+ min(pc->req_xfer, 63 * 1024));
+ }
if (pc->flags & PC_FLAG_DMA_ERROR) {
pc->flags &= ~PC_FLAG_DMA_ERROR;
@@ -581,13 +587,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (!drive->dma)
pc->flags &= ~PC_FLAG_DMA_OK;
- if (scsi)
- tf_flags = 0;
- else if (dev_is_idecd(drive))
- tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
- else
- tf_flags = IDE_TFLAG_OUT_DEVICE;
-
ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma);
/* Issue the packet command */
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 3/6] ide-atapi: accomodate transfer length calculation for ide-cd
2008-12-04 6:43 ` Borislav Petkov
@ 2008-12-04 6:43 ` Borislav Petkov
-1 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
... by factoring it out of ide_cd_do_request() into a helper, as suggested by
Bart.
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 15 ++++++++++++++-
drivers/ide/ide-cd.c | 4 ++--
include/linux/ide.h | 2 ++
3 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index b6e0aac..7162317 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -252,6 +252,18 @@ int ide_scsi_expiry(ide_drive_t *drive)
}
EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+int ide_cd_get_xferlen(struct request *rq)
+{
+ if (blk_fs_request(rq))
+ return 32768;
+ else if (blk_sense_request(rq) || blk_pc_request(rq) ||
+ rq->cmd_type == REQ_TYPE_ATA_PC)
+ return rq->data_len;
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
+
/*
* This is the usual interrupt handler which will be called during a packet
* command. We will transfer some of the data (as requested by the drive)
@@ -551,7 +563,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
u32 tf_flags;
- u16 bcount = 0;
+ u16 bcount;
u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
/* We haven't transferred any data yet */
@@ -560,6 +572,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (dev_is_idecd(drive)) {
tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+ bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
} else if (scsi) {
tf_flags = 0;
bcount = min(pc->req_xfer, 63 * 1024);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 65e5513..8d3c771 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1214,8 +1214,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
__func__, rq->cmd[0], rq->cmd_type,
(unsigned long long)block);
+ xferlen = ide_cd_get_xferlen(rq);
+
if (blk_fs_request(rq)) {
- xferlen = 32768;
fn = cdrom_start_rw_cont;
if (cdrom_start_rw(drive, rq) == ide_stopped)
@@ -1225,7 +1226,6 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
return ide_stopped;
} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC) {
- xferlen = rq->data_len;
fn = cdrom_do_newpc_cont;
if (!rq->timeout)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index eb4c01f..e35ff68 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1254,6 +1254,8 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
int ide_scsi_expiry(ide_drive_t *);
+int ide_cd_get_xferlen(struct request *);
+
ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 3/6] ide-atapi: accomodate transfer length calculation for ide-cd
@ 2008-12-04 6:43 ` Borislav Petkov
0 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
... by factoring it out of ide_cd_do_request() into a helper, as suggested by
Bart.
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 15 ++++++++++++++-
drivers/ide/ide-cd.c | 4 ++--
include/linux/ide.h | 2 ++
3 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index b6e0aac..7162317 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -252,6 +252,18 @@ int ide_scsi_expiry(ide_drive_t *drive)
}
EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+int ide_cd_get_xferlen(struct request *rq)
+{
+ if (blk_fs_request(rq))
+ return 32768;
+ else if (blk_sense_request(rq) || blk_pc_request(rq) ||
+ rq->cmd_type == REQ_TYPE_ATA_PC)
+ return rq->data_len;
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
+
/*
* This is the usual interrupt handler which will be called during a packet
* command. We will transfer some of the data (as requested by the drive)
@@ -551,7 +563,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
u32 tf_flags;
- u16 bcount = 0;
+ u16 bcount;
u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
/* We haven't transferred any data yet */
@@ -560,6 +572,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (dev_is_idecd(drive)) {
tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+ bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
} else if (scsi) {
tf_flags = 0;
bcount = min(pc->req_xfer, 63 * 1024);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 65e5513..8d3c771 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1214,8 +1214,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
__func__, rq->cmd[0], rq->cmd_type,
(unsigned long long)block);
+ xferlen = ide_cd_get_xferlen(rq);
+
if (blk_fs_request(rq)) {
- xferlen = 32768;
fn = cdrom_start_rw_cont;
if (cdrom_start_rw(drive, rq) == ide_stopped)
@@ -1225,7 +1226,6 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
return ide_stopped;
} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC) {
- xferlen = rq->data_len;
fn = cdrom_do_newpc_cont;
if (!rq->timeout)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index eb4c01f..e35ff68 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1254,6 +1254,8 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
int ide_scsi_expiry(ide_drive_t *);
+int ide_cd_get_xferlen(struct request *);
+
ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 4/6] ide-atapi: setup dma for ide-cd
2008-12-04 6:43 ` Borislav Petkov
@ 2008-12-04 6:43 ` Borislav Petkov
-1 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 7162317..8884877 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -588,8 +588,9 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
ide_dma_off(drive);
}
- if ((pc->flags & PC_FLAG_DMA_OK) &&
- (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
+ if (((pc->flags & PC_FLAG_DMA_OK) &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA)) ||
+ drive->dma) {
if (scsi)
hwif->sg_mapped = 1;
drive->dma = !hwif->dma_ops->dma_setup(drive);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 4/6] ide-atapi: setup dma for ide-cd
@ 2008-12-04 6:43 ` Borislav Petkov
0 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 7162317..8884877 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -588,8 +588,9 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
ide_dma_off(drive);
}
- if ((pc->flags & PC_FLAG_DMA_OK) &&
- (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
+ if (((pc->flags & PC_FLAG_DMA_OK) &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA)) ||
+ drive->dma) {
if (scsi)
hwif->sg_mapped = 1;
drive->dma = !hwif->dma_ops->dma_setup(drive);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c
2008-12-04 6:43 ` Borislav Petkov
@ 2008-12-04 6:43 ` Borislav Petkov
-1 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
- cdrom_timer_expiry -> ide_cd_expiry
- remove expiry-arg to ide_issue_pc as it is redundant now
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 42 ++++++++++++++++++++++++++++++++++++++----
drivers/ide/ide-cd.c | 38 +++-----------------------------------
drivers/ide/ide-cd.h | 1 -
drivers/ide/ide-floppy.c | 2 +-
drivers/ide/ide-tape.c | 2 +-
drivers/scsi/ide-scsi.c | 2 +-
include/linux/ide.h | 5 +++--
7 files changed, 47 insertions(+), 45 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8884877..bb867a0 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
*/
#include <linux/kernel.h>
+#include <linux/cdrom.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <scsi/scsi.h>
@@ -250,7 +251,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
return 0; /* we do not want the IDE subsystem to retry */
}
-EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+
+int ide_cd_expiry(ide_drive_t *drive)
+{
+ struct request *rq = HWGROUP(drive)->rq;
+ unsigned long wait = 0;
+
+ debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
+
+ /*
+ * Some commands are *slow* and normally take a long time to complete.
+ * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+ * commands/drives support that. Let ide_timer_expiry keep polling us
+ * for these.
+ */
+ switch (rq->cmd[0]) {
+ case GPCMD_BLANK:
+ case GPCMD_FORMAT_UNIT:
+ case GPCMD_RESERVE_RZONE_TRACK:
+ case GPCMD_CLOSE_TRACK:
+ case GPCMD_FLUSH_CACHE:
+ wait = ATAPI_WAIT_PC;
+ break;
+ default:
+ if (!(rq->cmd_flags & REQ_QUIET))
+ printk(KERN_INFO "cmd 0x%x timed out\n",
+ rq->cmd[0]);
+ wait = 0;
+ break;
+ }
+ return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
int ide_cd_get_xferlen(struct request *rq)
{
@@ -557,11 +589,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
return ide_started;
}
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
- ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
{
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
+ ide_expiry_t *expiry = NULL;
u32 tf_flags;
u16 bcount;
u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
@@ -573,9 +605,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (dev_is_idecd(drive)) {
tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+ expiry = ide_cd_expiry;
} else if (scsi) {
tf_flags = 0;
bcount = min(pc->req_xfer, 63 * 1024);
+ expiry = ide_scsi_expiry;
} else {
tf_flags = IDE_TFLAG_OUT_DEVICE;
bcount = ((drive->media == ide_tape) ?
@@ -606,7 +640,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
- timeout, NULL);
+ timeout, expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8d3c771..105e4d8 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -511,38 +511,6 @@ end_request:
return 1;
}
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
- unsigned long wait = 0;
-
- ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
- rq->cmd[0]);
-
- /*
- * Some commands are *slow* and normally take a long time to complete.
- * Usually we can use the ATAPI "disconnect" to bypass this, but not all
- * commands/drives support that. Let ide_timer_expiry keep polling us
- * for these.
- */
- switch (rq->cmd[0]) {
- case GPCMD_BLANK:
- case GPCMD_FORMAT_UNIT:
- case GPCMD_RESERVE_RZONE_TRACK:
- case GPCMD_CLOSE_TRACK:
- case GPCMD_FLUSH_CACHE:
- wait = ATAPI_WAIT_PC;
- break;
- default:
- if (!(rq->cmd_flags & REQ_QUIET))
- printk(KERN_INFO PFX "cmd 0x%x timed out\n",
- rq->cmd[0]);
- wait = 0;
- break;
- }
- return wait;
-}
-
/*
* Set up the device registers for transferring a packet command on DEV,
* expecting to later transfer XFERLEN bytes. HANDLER is the routine
@@ -574,7 +542,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
/* packet command */
ide_execute_command(drive, ATA_CMD_PACKET, handler,
- ATAPI_WAIT_PC, cdrom_timer_expiry);
+ ATAPI_WAIT_PC, ide_cd_expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
@@ -621,7 +589,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
}
/* arm the interrupt handler */
- ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+ ide_set_handler(drive, handler, rq->timeout, ide_cd_expiry);
/* ATAPI commands get padded out to 12 bytes minimum */
cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -1088,7 +1056,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
} else {
timeout = ATAPI_WAIT_PC;
if (!blk_fs_request(rq))
- expiry = cdrom_timer_expiry;
+ expiry = ide_cd_expiry;
}
ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 389faa4..a7a4d00 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -19,7 +19,6 @@
/*
* typical timeout for packet command
*/
-#define ATAPI_WAIT_PC (60 * HZ)
#define ATAPI_WAIT_WRITE_BUSY (10 * HZ)
/************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1f07f38..fdec729 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_FLOPPY_CMD);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470e..ac9e29a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_TAPE_CMD);
}
/* A mode sense command is used to "sense" tape parameters. */
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index c24140a..7890718 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -315,7 +315,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
/* Set the current packet command */
drive->pc = pc;
- return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry);
+ return ide_issue_pc(drive, ide_scsi_get_timeout(pc));
}
/*
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e35ff68..7fce92a 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -396,6 +396,7 @@ enum {
* This is used for several packet commands (not for READ/WRITE commands).
*/
#define IDE_PC_BUFFER_SIZE 256
+#define ATAPI_WAIT_PC (60 * HZ)
struct ide_atapi_pc {
/* actual packet bytes */
@@ -1252,11 +1253,11 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
}
-int ide_scsi_expiry(ide_drive_t *);
+int ide_cd_expiry(ide_drive_t *);
int ide_cd_get_xferlen(struct request *);
-ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int);
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c
@ 2008-12-04 6:43 ` Borislav Petkov
0 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
- cdrom_timer_expiry -> ide_cd_expiry
- remove expiry-arg to ide_issue_pc as it is redundant now
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 42 ++++++++++++++++++++++++++++++++++++++----
drivers/ide/ide-cd.c | 38 +++-----------------------------------
drivers/ide/ide-cd.h | 1 -
drivers/ide/ide-floppy.c | 2 +-
drivers/ide/ide-tape.c | 2 +-
drivers/scsi/ide-scsi.c | 2 +-
include/linux/ide.h | 5 +++--
7 files changed, 47 insertions(+), 45 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8884877..bb867a0 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
*/
#include <linux/kernel.h>
+#include <linux/cdrom.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <scsi/scsi.h>
@@ -250,7 +251,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
return 0; /* we do not want the IDE subsystem to retry */
}
-EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+
+int ide_cd_expiry(ide_drive_t *drive)
+{
+ struct request *rq = HWGROUP(drive)->rq;
+ unsigned long wait = 0;
+
+ debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
+
+ /*
+ * Some commands are *slow* and normally take a long time to complete.
+ * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+ * commands/drives support that. Let ide_timer_expiry keep polling us
+ * for these.
+ */
+ switch (rq->cmd[0]) {
+ case GPCMD_BLANK:
+ case GPCMD_FORMAT_UNIT:
+ case GPCMD_RESERVE_RZONE_TRACK:
+ case GPCMD_CLOSE_TRACK:
+ case GPCMD_FLUSH_CACHE:
+ wait = ATAPI_WAIT_PC;
+ break;
+ default:
+ if (!(rq->cmd_flags & REQ_QUIET))
+ printk(KERN_INFO "cmd 0x%x timed out\n",
+ rq->cmd[0]);
+ wait = 0;
+ break;
+ }
+ return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
int ide_cd_get_xferlen(struct request *rq)
{
@@ -557,11 +589,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
return ide_started;
}
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
- ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
{
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
+ ide_expiry_t *expiry = NULL;
u32 tf_flags;
u16 bcount;
u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
@@ -573,9 +605,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (dev_is_idecd(drive)) {
tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+ expiry = ide_cd_expiry;
} else if (scsi) {
tf_flags = 0;
bcount = min(pc->req_xfer, 63 * 1024);
+ expiry = ide_scsi_expiry;
} else {
tf_flags = IDE_TFLAG_OUT_DEVICE;
bcount = ((drive->media == ide_tape) ?
@@ -606,7 +640,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
- timeout, NULL);
+ timeout, expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8d3c771..105e4d8 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -511,38 +511,6 @@ end_request:
return 1;
}
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
- unsigned long wait = 0;
-
- ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
- rq->cmd[0]);
-
- /*
- * Some commands are *slow* and normally take a long time to complete.
- * Usually we can use the ATAPI "disconnect" to bypass this, but not all
- * commands/drives support that. Let ide_timer_expiry keep polling us
- * for these.
- */
- switch (rq->cmd[0]) {
- case GPCMD_BLANK:
- case GPCMD_FORMAT_UNIT:
- case GPCMD_RESERVE_RZONE_TRACK:
- case GPCMD_CLOSE_TRACK:
- case GPCMD_FLUSH_CACHE:
- wait = ATAPI_WAIT_PC;
- break;
- default:
- if (!(rq->cmd_flags & REQ_QUIET))
- printk(KERN_INFO PFX "cmd 0x%x timed out\n",
- rq->cmd[0]);
- wait = 0;
- break;
- }
- return wait;
-}
-
/*
* Set up the device registers for transferring a packet command on DEV,
* expecting to later transfer XFERLEN bytes. HANDLER is the routine
@@ -574,7 +542,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
/* packet command */
ide_execute_command(drive, ATA_CMD_PACKET, handler,
- ATAPI_WAIT_PC, cdrom_timer_expiry);
+ ATAPI_WAIT_PC, ide_cd_expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
@@ -621,7 +589,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
}
/* arm the interrupt handler */
- ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+ ide_set_handler(drive, handler, rq->timeout, ide_cd_expiry);
/* ATAPI commands get padded out to 12 bytes minimum */
cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -1088,7 +1056,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
} else {
timeout = ATAPI_WAIT_PC;
if (!blk_fs_request(rq))
- expiry = cdrom_timer_expiry;
+ expiry = ide_cd_expiry;
}
ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 389faa4..a7a4d00 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -19,7 +19,6 @@
/*
* typical timeout for packet command
*/
-#define ATAPI_WAIT_PC (60 * HZ)
#define ATAPI_WAIT_WRITE_BUSY (10 * HZ)
/************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1f07f38..fdec729 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_FLOPPY_CMD);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470e..ac9e29a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_TAPE_CMD);
}
/* A mode sense command is used to "sense" tape parameters. */
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index c24140a..7890718 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -315,7 +315,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
/* Set the current packet command */
drive->pc = pc;
- return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry);
+ return ide_issue_pc(drive, ide_scsi_get_timeout(pc));
}
/*
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e35ff68..7fce92a 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -396,6 +396,7 @@ enum {
* This is used for several packet commands (not for READ/WRITE commands).
*/
#define IDE_PC_BUFFER_SIZE 256
+#define ATAPI_WAIT_PC (60 * HZ)
struct ide_atapi_pc {
/* actual packet bytes */
@@ -1252,11 +1253,11 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
}
-int ide_scsi_expiry(ide_drive_t *);
+int ide_cd_expiry(ide_drive_t *);
int ide_cd_get_xferlen(struct request *);
-ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int);
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c
2008-12-04 6:43 ` Borislav Petkov
(?)
@ 2008-12-06 14:51 ` Bartlomiej Zolnierkiewicz
2008-12-06 20:03 ` Borislav Petkov
-1 siblings, 1 reply; 18+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2008-12-06 14:51 UTC (permalink / raw)
To: Borislav Petkov; +Cc: linux-kernel, linux-ide, Borislav Petkov, FUJITA Tomonori
On Thursday 04 December 2008, Borislav Petkov wrote:
> - cdrom_timer_expiry -> ide_cd_expiry
> - remove expiry-arg to ide_issue_pc as it is redundant now
>
> There should be no functionality change resulting from this patch.
Well, there is a minor change actually: ide_debug_log -> debug_log.
> @@ -250,7 +251,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
>
> return 0; /* we do not want the IDE subsystem to retry */
> }
> -EXPORT_SYMBOL_GPL(ide_scsi_expiry);
This seems to remove the symbol accidentally and although I've
just applied patch doing scheduled ide-scsi removal it would be
much better to take care of the core code's ide-scsi remnants
in separate patch(es).
> @@ -19,7 +19,6 @@
> /*
> * typical timeout for packet command
> */
> -#define ATAPI_WAIT_PC (60 * HZ)
> #define ATAPI_WAIT_WRITE_BUSY (10 * HZ)
The comment should be moved together with ATAPI_WAIT_PC define
(or removed).
The rest of the patch is fine.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c
2008-12-06 14:51 ` Bartlomiej Zolnierkiewicz
@ 2008-12-06 20:03 ` Borislav Petkov
2008-12-07 13:56 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 18+ messages in thread
From: Borislav Petkov @ 2008-12-06 20:03 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: linux-kernel, linux-ide, FUJITA Tomonori
> This seems to remove the symbol accidentally and although I've
> just applied patch doing scheduled ide-scsi removal it would be
> much better to take care of the core code's ide-scsi remnants
> in separate patch(es).
... patches coming up...
> > @@ -19,7 +19,6 @@
> > /*
> > * typical timeout for packet command
> > */
> > -#define ATAPI_WAIT_PC (60 * HZ)
> > #define ATAPI_WAIT_WRITE_BUSY (10 * HZ)
>
> The comment should be moved together with ATAPI_WAIT_PC define
> (or removed).
>
> The rest of the patch is fine.
here is a v2:
---
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sat, 6 Dec 2008 20:08:35 +0100
Subject: [PATCH] ide-cd: move cdrom_timer_expiry to ide-atapi.c
- cdrom_timer_expiry -> ide_cd_expiry
- remove expiry-arg to ide_issue_pc as it is redundant now
- ide_debug_log -> debug_log
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 41 ++++++++++++++++++++++++++++++++++++++---
drivers/ide/ide-cd.c | 38 +++-----------------------------------
drivers/ide/ide-cd.h | 4 ----
drivers/ide/ide-floppy.c | 2 +-
drivers/ide/ide-tape.c | 2 +-
include/linux/ide.h | 4 +++-
6 files changed, 46 insertions(+), 45 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8c5cf68..c110329 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
*/
#include <linux/kernel.h>
+#include <linux/cdrom.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <scsi/scsi.h>
@@ -252,6 +253,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
}
EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+int ide_cd_expiry(ide_drive_t *drive)
+{
+ struct request *rq = HWGROUP(drive)->rq;
+ unsigned long wait = 0;
+
+ debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
+
+ /*
+ * Some commands are *slow* and normally take a long time to complete.
+ * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+ * commands/drives support that. Let ide_timer_expiry keep polling us
+ * for these.
+ */
+ switch (rq->cmd[0]) {
+ case GPCMD_BLANK:
+ case GPCMD_FORMAT_UNIT:
+ case GPCMD_RESERVE_RZONE_TRACK:
+ case GPCMD_CLOSE_TRACK:
+ case GPCMD_FLUSH_CACHE:
+ wait = ATAPI_WAIT_PC;
+ break;
+ default:
+ if (!(rq->cmd_flags & REQ_QUIET))
+ printk(KERN_INFO "cmd 0x%x timed out\n",
+ rq->cmd[0]);
+ wait = 0;
+ break;
+ }
+ return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
+
int ide_cd_get_xferlen(struct request *rq)
{
if (blk_fs_request(rq))
@@ -562,11 +595,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
return ide_started;
}
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
- ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
{
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
+ ide_expiry_t *expiry = NULL;
u32 tf_flags;
u16 bcount;
u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
@@ -578,9 +611,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (dev_is_idecd(drive)) {
tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+ expiry = ide_cd_expiry;
} else if (scsi) {
tf_flags = 0;
bcount = min(pc->req_xfer, 63 * 1024);
+ expiry = ide_scsi_expiry;
} else {
tf_flags = IDE_TFLAG_OUT_DEVICE;
bcount = ((drive->media == ide_tape) ?
@@ -613,7 +648,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (drive->dma)
drive->waiting_for_dma = 0;
ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
- timeout, NULL);
+ timeout, expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8d3c771..105e4d8 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -511,38 +511,6 @@ end_request:
return 1;
}
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
- unsigned long wait = 0;
-
- ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
- rq->cmd[0]);
-
- /*
- * Some commands are *slow* and normally take a long time to complete.
- * Usually we can use the ATAPI "disconnect" to bypass this, but not all
- * commands/drives support that. Let ide_timer_expiry keep polling us
- * for these.
- */
- switch (rq->cmd[0]) {
- case GPCMD_BLANK:
- case GPCMD_FORMAT_UNIT:
- case GPCMD_RESERVE_RZONE_TRACK:
- case GPCMD_CLOSE_TRACK:
- case GPCMD_FLUSH_CACHE:
- wait = ATAPI_WAIT_PC;
- break;
- default:
- if (!(rq->cmd_flags & REQ_QUIET))
- printk(KERN_INFO PFX "cmd 0x%x timed out\n",
- rq->cmd[0]);
- wait = 0;
- break;
- }
- return wait;
-}
-
/*
* Set up the device registers for transferring a packet command on DEV,
* expecting to later transfer XFERLEN bytes. HANDLER is the routine
@@ -574,7 +542,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
/* packet command */
ide_execute_command(drive, ATA_CMD_PACKET, handler,
- ATAPI_WAIT_PC, cdrom_timer_expiry);
+ ATAPI_WAIT_PC, ide_cd_expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
@@ -621,7 +589,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
}
/* arm the interrupt handler */
- ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+ ide_set_handler(drive, handler, rq->timeout, ide_cd_expiry);
/* ATAPI commands get padded out to 12 bytes minimum */
cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -1088,7 +1056,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
} else {
timeout = ATAPI_WAIT_PC;
if (!blk_fs_request(rq))
- expiry = cdrom_timer_expiry;
+ expiry = ide_cd_expiry;
}
ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 389faa4..bf676b2 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -16,10 +16,6 @@
#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
-/*
- * typical timeout for packet command
- */
-#define ATAPI_WAIT_PC (60 * HZ)
#define ATAPI_WAIT_WRITE_BUSY (10 * HZ)
/************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1f07f38..fdec729 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_FLOPPY_CMD);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470e..ac9e29a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_TAPE_CMD);
}
/* A mode sense command is used to "sense" tape parameters. */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e35ff68..e20e0b5 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -396,6 +396,7 @@ enum {
* This is used for several packet commands (not for READ/WRITE commands).
*/
#define IDE_PC_BUFFER_SIZE 256
+#define ATAPI_WAIT_PC (60 * HZ)
struct ide_atapi_pc {
/* actual packet bytes */
@@ -1253,10 +1254,11 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
}
int ide_scsi_expiry(ide_drive_t *);
+int ide_cd_expiry(ide_drive_t *);
int ide_cd_get_xferlen(struct request *);
-ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int);
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
--
1.6.0.4
--
Regards/Gruss,
Boris.
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 5/6] ide-cd: move cdrom_timer_expiry to ide-atapi.c
2008-12-06 20:03 ` Borislav Petkov
@ 2008-12-07 13:56 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 18+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2008-12-07 13:56 UTC (permalink / raw)
To: petkovbb; +Cc: linux-kernel, linux-ide, FUJITA Tomonori
On Saturday 06 December 2008, Borislav Petkov wrote:
> here is a v2:
> ---
> From: Borislav Petkov <petkovbb@gmail.com>
> Date: Sat, 6 Dec 2008 20:08:35 +0100
> Subject: [PATCH] ide-cd: move cdrom_timer_expiry to ide-atapi.c
>
> - cdrom_timer_expiry -> ide_cd_expiry
> - remove expiry-arg to ide_issue_pc as it is redundant now
> - ide_debug_log -> debug_log
>
> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
applied, thanks
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 6/6] ide-atapi: teach ide atapi about drive->waiting_for_dma
2008-12-04 6:43 ` Borislav Petkov
@ 2008-12-04 6:43 ` Borislav Petkov
-1 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
In addition, we wait for DRQ to be asserted by repeatedly polling
device status no matter what DRQ type each device implements.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index bb867a0..a43bed3 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -543,6 +543,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
return startstop;
}
+ if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+ if (drive->dma)
+ drive->waiting_for_dma = 1;
+ }
+
ireason = ide_read_ireason(drive);
if (drive->media == ide_tape &&
(drive->dev_flags & IDE_DFLAG_SCSI) == 0)
@@ -639,6 +644,8 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+ if (drive->dma)
+ drive->waiting_for_dma = 0;
ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
timeout, expiry);
return ide_started;
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 6/6] ide-atapi: teach ide atapi about drive->waiting_for_dma
@ 2008-12-04 6:43 ` Borislav Petkov
0 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2008-12-04 6:43 UTC (permalink / raw)
To: bzolnier; +Cc: linux-kernel, linux-ide, Borislav Petkov
In addition, we wait for DRQ to be asserted by repeatedly polling
device status no matter what DRQ type each device implements.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index bb867a0..a43bed3 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -543,6 +543,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
return startstop;
}
+ if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+ if (drive->dma)
+ drive->waiting_for_dma = 1;
+ }
+
ireason = ide_read_ireason(drive);
if (drive->media == ide_tape &&
(drive->dev_flags & IDE_DFLAG_SCSI) == 0)
@@ -639,6 +644,8 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+ if (drive->dma)
+ drive->waiting_for_dma = 0;
ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
timeout, expiry);
return ide_started;
--
1.6.0.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 00/06] ide-atapi: more leftovers
2008-12-04 6:43 ` Borislav Petkov
` (6 preceding siblings ...)
(?)
@ 2008-12-06 14:51 ` Bartlomiej Zolnierkiewicz
-1 siblings, 0 replies; 18+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2008-12-06 14:51 UTC (permalink / raw)
To: Borislav Petkov; +Cc: linux-kernel, linux-ide
On Thursday 04 December 2008, Borislav Petkov wrote:
> Hi Bart,
>
> here are the reworked patches of the first batch of ide-cd to generic
> conversion. They've been lightly tested with ide-floppy only since the
> ide-cd is still needs rewiring after all is moved to ide-atapi.
Thanks, I applied everything except patch #5 (which needs fixup because
it goes too far into the future ;-).
^ permalink raw reply [flat|nested] 18+ messages in thread