* [Xenomai-help] Support for static APIs in uITRON skin
@ 2009-03-20 11:08 ravikiran.saralaya
2009-03-20 11:25 ` Philippe Gerum
0 siblings, 1 reply; 4+ messages in thread
From: ravikiran.saralaya @ 2009-03-20 11:08 UTC (permalink / raw)
To: xenomai
Hello,
I am planning to use Xenomai 2.4.7 for uITRON based application.
However it seems the uITRON skin doesn't support static creation of tasks, semaphores etc. Is there any specific reason for not supporting static APIs in Xenomai uITRON skin?
How can I go about in supporting static APIs for uITRON?
Regards,
Ravikiran
--
This message was sent on behalf of ravikiran.saralaya@domain.hid at openSubscriber.com
http://www.opensubscriber.com/messages/xenomai@xenomai.org
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Xenomai-help] Support for static APIs in uITRON skin
2009-03-20 11:08 [Xenomai-help] Support for static APIs in uITRON skin ravikiran.saralaya
@ 2009-03-20 11:25 ` Philippe Gerum
2009-03-24 4:16 ` ravikiran.saralaya
0 siblings, 1 reply; 4+ messages in thread
From: Philippe Gerum @ 2009-03-20 11:25 UTC (permalink / raw)
To: ravikiran.saralaya; +Cc: xenomai
ravikiran.saralaya@domain.hid wrote:
> Hello,
>
> I am planning to use Xenomai 2.4.7 for uITRON based application.
>
> However it seems the uITRON skin doesn't support static creation of tasks, semaphores etc. Is there any specific reason for not supporting static APIs in Xenomai uITRON skin?
None, aside of the fact that this implementation supports level E from the
uITRON spec, and it seems rather straightforward to get static object creation
at init time out of the existing dynamic object creation services.
>
> How can I go about in supporting static APIs for uITRON?
>
> Regards,
> Ravikiran
>
>
>
> --
> This message was sent on behalf of ravikiran.saralaya@domain.hid at openSubscriber.com
> http://www.opensubscriber.com/messages/xenomai@xenomai.org
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help
>
--
Philippe.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Xenomai-help] Support for static APIs in uITRON skin
2009-03-20 11:25 ` Philippe Gerum
@ 2009-03-24 4:16 ` ravikiran.saralaya
2009-03-24 8:59 ` Philippe Gerum
0 siblings, 1 reply; 4+ messages in thread
From: ravikiran.saralaya @ 2009-03-24 4:16 UTC (permalink / raw)
To: xenomai
Thanks Philippe for the clarification.
I am curious to know if there are any attempts being done to make uITRON skin compliant to uITRON Specification version 4.03.00.
Regards,
Ravikiran
-- Philippe Gerum wrote :
ravikiran.saralaya@domain.hid.... wrote:
> Hello,
>
> I am planning to use Xenomai 2.4.7 for uITRON based application.
>
> However it seems the uITRON skin doesn't support static creation of tasks, semaphores etc. Is there any specific reason for not supporting static APIs in Xenomai uITRON skin?
None, aside of the fact that this implementation supports level E from the
uITRON spec, and it seems rather straightforward to get static object creation
at init time out of the existing dynamic object creation services.
>
> How can I go about in supporting static APIs for uITRON?
>
> Regards,
> Ravikiran
>
>
>
> --
> This message was sent on behalf of ravikiran.saralaya@domain.hid.... at openSubscriber.com
> http://www.opensubscriber.com/messages/xenomai@xenomai.org
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid....
> https://mail.gna.org/listinfo/xenomai-help
>
--
Philippe.
_______________________________________________
Xenomai-help mailing list
Xenomai-help@domain.hid....
https://mail.gna.org/listinfo/xenomai-help
--
This message was sent on behalf of ravikiran.saralaya@domain.hid at openSubscriber.com
http://www.opensubscriber.com/message/xenomai@xenomai.org
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Xenomai-help] Support for static APIs in uITRON skin
2009-03-24 4:16 ` ravikiran.saralaya
@ 2009-03-24 8:59 ` Philippe Gerum
0 siblings, 0 replies; 4+ messages in thread
From: Philippe Gerum @ 2009-03-24 8:59 UTC (permalink / raw)
To: ravikiran.saralaya; +Cc: xenomai
On Tue, 2009-03-24 at 00:16 -0400, ravikiran.saralaya@domain.hid wrote:
> Thanks Philippe for the clarification.
>
> I am curious to know if there are any attempts being done to make uITRON skin compliant to uITRON Specification version 4.03.00.
>
No idea.
> Regards,
> Ravikiran
>
> -- Philippe Gerum wrote :
> ravikiran.saralaya@domain.hid.... wrote:
> > Hello,
> >
> > I am planning to use Xenomai 2.4.7 for uITRON based application.
> >
> > However it seems the uITRON skin doesn't support static creation of tasks, semaphores etc. Is there any specific reason for not supporting static APIs in Xenomai uITRON skin?
>
>
> None, aside of the fact that this implementation supports level E from the
> uITRON spec, and it seems rather straightforward to get static object creation
> at init time out of the existing dynamic object creation services.
>
> >
> > How can I go about in supporting static APIs for uITRON?
> >
> > Regards,
> > Ravikiran
> >
> >
> >
> > --
> > This message was sent on behalf of ravikiran.saralaya@domain.hid.... at openSubscriber.com
> > http://www.opensubscriber.com/messages/xenomai@xenomai.org
> >
> > _______________________________________________
> > Xenomai-help mailing list
> > Xenomai-help@domain.hid....
> > https://mail.gna.org/listinfo/xenomai-help
> >
>
>
--
Philippe.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-03-24 8:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-20 11:08 [Xenomai-help] Support for static APIs in uITRON skin ravikiran.saralaya
2009-03-20 11:25 ` Philippe Gerum
2009-03-24 4:16 ` ravikiran.saralaya
2009-03-24 8:59 ` Philippe Gerum
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.