From: Justin P. Mattock <justinmattock@gmail.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] ath9k seems to be broken on 2.6.30-rc4 with a macbook pro
Date: Mon, 11 May 2009 15:18:54 -0700 [thread overview]
Message-ID: <1242080334.1991.11.camel@unix> (raw)
In-Reply-To: <4A089E49.7080403@gmail.com>
On Mon, 2009-05-11 at 23:53 +0200, Jiri Slaby wrote:
> Adding some CCs.
>
> On 05/11/2009 07:02 PM, Justin Mattock wrote:
> > I've been trying to diagnose an issue
> > with 2.6.30-rc4. At first thinking it
> > was not the kernel, but the network manager
> > (in my case I use wicd).
> > with 2.6.29-rc8 the system starts up,
> > connects no problem.
> > but as soon as I load 2.6.30-rc4
> > I get limited connection to none.
> > in dmesg I see:
> >
> > [ 36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [ 36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [ 36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [ 36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> > [ 44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [ 44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [ 44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [ 45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> >
> > The type of encryption used is just
> > a standard WEP key(no WPA).
> >
> > has this been resolved already?
> >
> > Also I'm noticing(but not that big of a deal)
> > if I set in sysctl.conf:
> >
> > net.ipv4.conf.all.arp_ignore=8
> > net.ipv4.conf.wlan0.arp_ignore=8
> > net.ipv4.conf.wmaster0.arp_ignore=8
> > net.ipv4.conf.lo.arp_ignore=8
> > net.ipv4.conf.all.arp_announce=2
> > net.ipv4.conf.wlan0.arp_announce=2
> > net.ipv4.conf.wmaster0.arp_announce=2
> > net.ipv4.conf.lo.arp_announce=2
> >
> > watching a movie on hulu, about 15/20 minuets
> > into enjoyment, hulu craps out(starts re-buffering)
> > then re initializes after about 30 secs later.
> > but if I comment those out(set back to default)
> > hulu will run fine.
> >
>
Cool.
Another odd thing Ive experienced as well
with 2.6.29-rc8 is if my iphone is
connected to the router I'll have a hard time connecting
to anything until I disconnect the iphone
from the router.(my guess is the router is getting
old).
regards,
Justin P. Mattock
WARNING: multiple messages have this Message-ID (diff)
From: "Justin P. Mattock" <justinmattock@gmail.com>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
ath9k-devel@lists.ath9k.org, linux-wireless@vger.kernel.org
Subject: Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro
Date: Mon, 11 May 2009 15:18:54 -0700 [thread overview]
Message-ID: <1242080334.1991.11.camel@unix> (raw)
In-Reply-To: <4A089E49.7080403@gmail.com>
On Mon, 2009-05-11 at 23:53 +0200, Jiri Slaby wrote:
> Adding some CCs.
>
> On 05/11/2009 07:02 PM, Justin Mattock wrote:
> > I've been trying to diagnose an issue
> > with 2.6.30-rc4. At first thinking it
> > was not the kernel, but the network manager
> > (in my case I use wicd).
> > with 2.6.29-rc8 the system starts up,
> > connects no problem.
> > but as soon as I load 2.6.30-rc4
> > I get limited connection to none.
> > in dmesg I see:
> >
> > [ 36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [ 36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [ 36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [ 36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> > [ 44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [ 44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [ 44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [ 45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> >
> > The type of encryption used is just
> > a standard WEP key(no WPA).
> >
> > has this been resolved already?
> >
> > Also I'm noticing(but not that big of a deal)
> > if I set in sysctl.conf:
> >
> > net.ipv4.conf.all.arp_ignore=8
> > net.ipv4.conf.wlan0.arp_ignore=8
> > net.ipv4.conf.wmaster0.arp_ignore=8
> > net.ipv4.conf.lo.arp_ignore=8
> > net.ipv4.conf.all.arp_announce=2
> > net.ipv4.conf.wlan0.arp_announce=2
> > net.ipv4.conf.wmaster0.arp_announce=2
> > net.ipv4.conf.lo.arp_announce=2
> >
> > watching a movie on hulu, about 15/20 minuets
> > into enjoyment, hulu craps out(starts re-buffering)
> > then re initializes after about 30 secs later.
> > but if I comment those out(set back to default)
> > hulu will run fine.
> >
>
Cool.
Another odd thing Ive experienced as well
with 2.6.29-rc8 is if my iphone is
connected to the router I'll have a hard time connecting
to anything until I disconnect the iphone
from the router.(my guess is the router is getting
old).
regards,
Justin P. Mattock
WARNING: multiple messages have this Message-ID (diff)
From: "Justin P. Mattock" <justinmattock@gmail.com>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
ath9k-devel@venema.h4ckr.net, linux-wireless@vger.kernel.org
Subject: Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro
Date: Mon, 11 May 2009 15:18:54 -0700 [thread overview]
Message-ID: <1242080334.1991.11.camel@unix> (raw)
In-Reply-To: <4A089E49.7080403@gmail.com>
On Mon, 2009-05-11 at 23:53 +0200, Jiri Slaby wrote:
> Adding some CCs.
>
> On 05/11/2009 07:02 PM, Justin Mattock wrote:
> > I've been trying to diagnose an issue
> > with 2.6.30-rc4. At first thinking it
> > was not the kernel, but the network manager
> > (in my case I use wicd).
> > with 2.6.29-rc8 the system starts up,
> > connects no problem.
> > but as soon as I load 2.6.30-rc4
> > I get limited connection to none.
> > in dmesg I see:
> >
> > [ 36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [ 36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [ 36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [ 36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> > [ 44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> > [ 44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> > [ 44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> > [ 45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> >
> > The type of encryption used is just
> > a standard WEP key(no WPA).
> >
> > has this been resolved already?
> >
> > Also I'm noticing(but not that big of a deal)
> > if I set in sysctl.conf:
> >
> > net.ipv4.conf.all.arp_ignore=8
> > net.ipv4.conf.wlan0.arp_ignore=8
> > net.ipv4.conf.wmaster0.arp_ignore=8
> > net.ipv4.conf.lo.arp_ignore=8
> > net.ipv4.conf.all.arp_announce=2
> > net.ipv4.conf.wlan0.arp_announce=2
> > net.ipv4.conf.wmaster0.arp_announce=2
> > net.ipv4.conf.lo.arp_announce=2
> >
> > watching a movie on hulu, about 15/20 minuets
> > into enjoyment, hulu craps out(starts re-buffering)
> > then re initializes after about 30 secs later.
> > but if I comment those out(set back to default)
> > hulu will run fine.
> >
>
Cool.
Another odd thing Ive experienced as well
with 2.6.29-rc8 is if my iphone is
connected to the router I'll have a hard time connecting
to anything until I disconnect the iphone
from the router.(my guess is the router is getting
old).
regards,
Justin P. Mattock
next prev parent reply other threads:[~2009-05-11 22:18 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-11 17:02 ath9k seems to be broken on 2.6.30-rc4 with a macbook pro Justin Mattock
2009-05-11 21:53 ` [ath9k-devel] " Jiri Slaby
2009-05-11 21:53 ` Jiri Slaby
2009-05-11 21:53 ` Jiri Slaby
2009-05-11 22:18 ` Justin P. Mattock [this message]
2009-05-11 22:18 ` Justin P. Mattock
2009-05-11 22:18 ` Justin P. Mattock
2009-05-12 15:03 ` [ath9k-devel] " Bob Copeland
2009-05-12 15:03 ` Bob Copeland
2009-05-12 15:03 ` Bob Copeland
2009-05-12 16:43 ` [ath9k-devel] " Justin Mattock
2009-05-12 16:43 ` Justin Mattock
2009-05-12 16:43 ` Justin Mattock
2009-05-11 22:24 ` [ath9k-devel] " Luis R. Rodriguez
2009-05-11 22:24 ` Luis R. Rodriguez
2009-05-11 22:24 ` Luis R. Rodriguez
2009-05-11 23:23 ` [ath9k-devel] " Justin Mattock
2009-05-11 23:23 ` Justin Mattock
2009-05-11 23:23 ` Justin Mattock
2009-05-12 10:39 ` [ath9k-devel] " Evgeni Golov
2009-05-12 10:39 ` Evgeni Golov
2009-05-12 10:39 ` Evgeni Golov
2009-05-12 10:39 ` [ath9k-devel] " Evgeni Golov
2009-05-12 10:39 ` Evgeni Golov
2009-05-12 14:28 ` Justin Mattock
2009-05-12 17:46 ` [ath9k-devel] " Evgeni Golov
2009-05-12 17:46 ` Evgeni Golov
2009-05-12 20:04 ` [ath9k-devel] " Justin Mattock
2009-05-12 20:04 ` Justin Mattock
2009-05-12 23:01 ` [ath9k-devel] " Luis R. Rodriguez
2009-05-12 23:01 ` Luis R. Rodriguez
[not found] ` <1242169748.14227.15.camel@johannes.local>
2009-05-12 23:36 ` [ath9k-devel] " Justin P. Mattock
2009-05-12 23:36 ` Justin P. Mattock
2009-05-13 20:19 ` [ath9k-devel] " Justin Mattock
2009-05-13 20:19 ` Justin Mattock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1242080334.1991.11.camel@unix \
--to=justinmattock@gmail.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.