All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jiri Slaby <jirislaby@gmail.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] ath9k seems to be broken on 2.6.30-rc4 with a macbook pro
Date: Mon, 11 May 2009 23:53:13 +0200	[thread overview]
Message-ID: <4A089E49.7080403@gmail.com> (raw)
In-Reply-To: <dd18b0c30905111002y4aeb2033ma2fbb2730f5acdaf@mail.gmail.com>

Adding some CCs.

On 05/11/2009 07:02 PM, Justin Mattock wrote:
> I've been trying to diagnose an issue
> with 2.6.30-rc4. At first thinking it
> was not the kernel, but the network manager
> (in my case I use wicd).
> with 2.6.29-rc8 the system starts up,
> connects no problem.
> but as soon as I load 2.6.30-rc4
> I get limited connection to none.
> in dmesg I see:
> 
> [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> 
> The type of encryption used is just
> a standard WEP key(no WPA).
> 
> has this been resolved already?
> 
> Also I'm noticing(but not that big of a deal)
> if I set in sysctl.conf:
> 
> net.ipv4.conf.all.arp_ignore=8
> net.ipv4.conf.wlan0.arp_ignore=8
> net.ipv4.conf.wmaster0.arp_ignore=8
> net.ipv4.conf.lo.arp_ignore=8
> net.ipv4.conf.all.arp_announce=2
> net.ipv4.conf.wlan0.arp_announce=2
> net.ipv4.conf.wmaster0.arp_announce=2
> net.ipv4.conf.lo.arp_announce=2
> 
> watching a movie on hulu, about 15/20 minuets
> into enjoyment, hulu craps out(starts re-buffering)
> then re initializes after about 30 secs later.
> but if I comment those out(set back to default)
> hulu will run fine.
> 

WARNING: multiple messages have this Message-ID (diff)
From: Jiri Slaby <jirislaby@gmail.com>
To: Justin Mattock <justinmattock@gmail.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	ath9k-devel@lists.ath9k.org, linux-wireless@vger.kernel.org
Subject: Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro
Date: Mon, 11 May 2009 23:53:13 +0200	[thread overview]
Message-ID: <4A089E49.7080403@gmail.com> (raw)
In-Reply-To: <dd18b0c30905111002y4aeb2033ma2fbb2730f5acdaf@mail.gmail.com>

Adding some CCs.

On 05/11/2009 07:02 PM, Justin Mattock wrote:
> I've been trying to diagnose an issue
> with 2.6.30-rc4. At first thinking it
> was not the kernel, but the network manager
> (in my case I use wicd).
> with 2.6.29-rc8 the system starts up,
> connects no problem.
> but as soon as I load 2.6.30-rc4
> I get limited connection to none.
> in dmesg I see:
> 
> [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> 
> The type of encryption used is just
> a standard WEP key(no WPA).
> 
> has this been resolved already?
> 
> Also I'm noticing(but not that big of a deal)
> if I set in sysctl.conf:
> 
> net.ipv4.conf.all.arp_ignore=8
> net.ipv4.conf.wlan0.arp_ignore=8
> net.ipv4.conf.wmaster0.arp_ignore=8
> net.ipv4.conf.lo.arp_ignore=8
> net.ipv4.conf.all.arp_announce=2
> net.ipv4.conf.wlan0.arp_announce=2
> net.ipv4.conf.wmaster0.arp_announce=2
> net.ipv4.conf.lo.arp_announce=2
> 
> watching a movie on hulu, about 15/20 minuets
> into enjoyment, hulu craps out(starts re-buffering)
> then re initializes after about 30 secs later.
> but if I comment those out(set back to default)
> hulu will run fine.
> 


WARNING: multiple messages have this Message-ID (diff)
From: Jiri Slaby <jirislaby@gmail.com>
To: Justin Mattock <justinmattock@gmail.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	ath9k-devel@venema.h4ckr.net, linux-wireless@vger.kernel.org
Subject: Re: ath9k seems to be broken on 2.6.30-rc4 with a macbook pro
Date: Mon, 11 May 2009 23:53:13 +0200	[thread overview]
Message-ID: <4A089E49.7080403@gmail.com> (raw)
In-Reply-To: <dd18b0c30905111002y4aeb2033ma2fbb2730f5acdaf@mail.gmail.com>

Adding some CCs.

On 05/11/2009 07:02 PM, Justin Mattock wrote:
> I've been trying to diagnose an issue
> with 2.6.30-rc4. At first thinking it
> was not the kernel, but the network manager
> (in my case I use wicd).
> with 2.6.29-rc8 the system starts up,
> connects no problem.
> but as soon as I load 2.6.30-rc4
> I get limited connection to none.
> in dmesg I see:
> 
> [   36.337419] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> [   36.530106] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> [   36.730100] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> [   36.930101] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> [   44.421728] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 1
> [   44.620080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 2
> [   44.820080] wlan0: direct probe to AP 00:1e:2a:00:67:f0 try 3
> [   45.020076] wlan0: direct probe to AP 00:1e:2a:00:67:f0 timed out
> 
> The type of encryption used is just
> a standard WEP key(no WPA).
> 
> has this been resolved already?
> 
> Also I'm noticing(but not that big of a deal)
> if I set in sysctl.conf:
> 
> net.ipv4.conf.all.arp_ignore=8
> net.ipv4.conf.wlan0.arp_ignore=8
> net.ipv4.conf.wmaster0.arp_ignore=8
> net.ipv4.conf.lo.arp_ignore=8
> net.ipv4.conf.all.arp_announce=2
> net.ipv4.conf.wlan0.arp_announce=2
> net.ipv4.conf.wmaster0.arp_announce=2
> net.ipv4.conf.lo.arp_announce=2
> 
> watching a movie on hulu, about 15/20 minuets
> into enjoyment, hulu craps out(starts re-buffering)
> then re initializes after about 30 secs later.
> but if I comment those out(set back to default)
> hulu will run fine.
> 


  reply	other threads:[~2009-05-11 21:53 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-11 17:02 ath9k seems to be broken on 2.6.30-rc4 with a macbook pro Justin Mattock
2009-05-11 21:53 ` Jiri Slaby [this message]
2009-05-11 21:53   ` Jiri Slaby
2009-05-11 21:53   ` Jiri Slaby
2009-05-11 22:18   ` [ath9k-devel] " Justin P. Mattock
2009-05-11 22:18     ` Justin P. Mattock
2009-05-11 22:18     ` Justin P. Mattock
2009-05-12 15:03     ` [ath9k-devel] " Bob Copeland
2009-05-12 15:03       ` Bob Copeland
2009-05-12 15:03       ` Bob Copeland
2009-05-12 16:43       ` [ath9k-devel] " Justin Mattock
2009-05-12 16:43         ` Justin Mattock
2009-05-12 16:43         ` Justin Mattock
2009-05-11 22:24   ` [ath9k-devel] " Luis R. Rodriguez
2009-05-11 22:24     ` Luis R. Rodriguez
2009-05-11 22:24     ` Luis R. Rodriguez
2009-05-11 23:23     ` [ath9k-devel] " Justin Mattock
2009-05-11 23:23       ` Justin Mattock
2009-05-11 23:23       ` Justin Mattock
2009-05-12 10:39   ` [ath9k-devel] " Evgeni Golov
2009-05-12 10:39     ` Evgeni Golov
2009-05-12 10:39     ` Evgeni Golov
2009-05-12 10:39   ` [ath9k-devel] " Evgeni Golov
2009-05-12 10:39     ` Evgeni Golov
2009-05-12 14:28     ` Justin Mattock
2009-05-12 17:46       ` [ath9k-devel] " Evgeni Golov
2009-05-12 17:46         ` Evgeni Golov
2009-05-12 20:04         ` [ath9k-devel] " Justin Mattock
2009-05-12 20:04           ` Justin Mattock
2009-05-12 23:01           ` [ath9k-devel] " Luis R. Rodriguez
2009-05-12 23:01             ` Luis R. Rodriguez
     [not found]             ` <1242169748.14227.15.camel@johannes.local>
2009-05-12 23:36               ` [ath9k-devel] " Justin P. Mattock
2009-05-12 23:36                 ` Justin P. Mattock
2009-05-13 20:19                 ` [ath9k-devel] " Justin Mattock
2009-05-13 20:19                   ` Justin Mattock

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A089E49.7080403@gmail.com \
    --to=jirislaby@gmail.com \
    --cc=ath9k-devel@lists.ath9k.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.