From: Don Fry <pcnet32@verizon.net>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Dan Carpenter <error27@gmail.com>,
corbet@lwn.net, eteo@redhat.com, Julia Lawall <julia@diku.dk>
Subject: Re: [PATCH] pcnet32: VLB support fixes
Date: Fri, 31 Jul 2009 11:45:29 -0700 [thread overview]
Message-ID: <1249065929.4229.3.camel@localhost.localdomain> (raw)
In-Reply-To: <200907302317.52648.bzolnier@gmail.com>
Acked-by: Don Fry <pcnet32@verizon.net>
---
I do not have any VLB hardware to test this, which is why I probably
introduced the error in 2004/5.
-----Original Message-----
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Don Fry <pcnet32@verizon.net>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Dan Carpenter
<error27@gmail.com>, corbet@lwn.net, eteo@redhat.com, Julia Lawall
<julia@diku.dk>
Subject: [PATCH] pcnet32: VLB support fixes
Date: Thu, 30 Jul 2009 23:17:52 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pcnet32: VLB support fixes
VLB support has been broken since at least 2004-2005 period as some
changes introduced back then assumed that ->pci_dev is always valid,
lets try to fix it:
- remove duplicated SET_NETDEV_DEV() call
- call SET_NETDEV_DEV() only for PCI devices
- check for ->pci_dev validity in pcnet32_open()
[ Alternatively we may consider removing VLB support but there would not
be much gain in it since an extra driver code needed for VLB support is
minimal and quite simple. ]
This takes care of the following entry from Dan's list:
drivers/net/pcnet32.c +1889 pcnet32_probe1(298) warning: variable derefenced before check 'pdev'
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
PS I still keep the original cc: list from the smatch thread -- please let
me know if you don't want to be spammed.. ;-)
drivers/net/pcnet32.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
Index: b/drivers/net/pcnet32.c
===================================================================
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1719,7 +1719,9 @@ pcnet32_probe1(unsigned long ioaddr, int
ret = -ENOMEM;
goto err_release_region;
}
- SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pdev)
+ SET_NETDEV_DEV(dev, &pdev->dev);
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
@@ -1818,7 +1820,6 @@ pcnet32_probe1(unsigned long ioaddr, int
spin_lock_init(&lp->lock);
- SET_NETDEV_DEV(dev, &pdev->dev);
lp->name = chipname;
lp->shared_irq = shared;
lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */
@@ -2089,6 +2090,7 @@ static void pcnet32_free_ring(struct net
static int pcnet32_open(struct net_device *dev)
{
struct pcnet32_private *lp = netdev_priv(dev);
+ struct pci_dev *pdev = lp->pci_dev;
unsigned long ioaddr = dev->base_addr;
u16 val;
int i;
@@ -2149,9 +2151,9 @@ static int pcnet32_open(struct net_devic
lp->a.write_csr(ioaddr, 124, val);
/* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */
- if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
- (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
- lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
+ if (pdev && pdev->subsystem_vendor == PCI_VENDOR_ID_AT &&
+ (pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
+ pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
if (lp->options & PCNET32_PORT_ASEL) {
lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
if (netif_msg_link(lp))
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Don Fry <pcnet32@verizon.net>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Dan Carpenter <error27@gmail.com>,
corbet@lwn.net, eteo@redhat.com, Julia Lawall <julia@diku.dk>
Subject: Re: [PATCH] pcnet32: VLB support fixes
Date: Fri, 31 Jul 2009 11:45:29 -0700 [thread overview]
Message-ID: <1249065929.4229.3.camel@localhost.localdomain> (raw)
In-Reply-To: <200907302317.52648.bzolnier@gmail.com>
Acked-by: Don Fry <pcnet32@verizon.net>
---
I do not have any VLB hardware to test this, which is why I probably
introduced the error in 2004/5.
-----Original Message-----
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Don Fry <pcnet32@verizon.net>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Dan Carpenter
<error27@gmail.com>, corbet@lwn.net, eteo@redhat.com, Julia Lawall
<julia@diku.dk>
Subject: [PATCH] pcnet32: VLB support fixes
Date: Thu, 30 Jul 2009 23:17:52 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pcnet32: VLB support fixes
VLB support has been broken since at least 2004-2005 period as some
changes introduced back then assumed that ->pci_dev is always valid,
lets try to fix it:
- remove duplicated SET_NETDEV_DEV() call
- call SET_NETDEV_DEV() only for PCI devices
- check for ->pci_dev validity in pcnet32_open()
[ Alternatively we may consider removing VLB support but there would not
be much gain in it since an extra driver code needed for VLB support is
minimal and quite simple. ]
This takes care of the following entry from Dan's list:
drivers/net/pcnet32.c +1889 pcnet32_probe1(298) warning: variable derefenced before check 'pdev'
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
PS I still keep the original cc: list from the smatch thread -- please let
me know if you don't want to be spammed.. ;-)
drivers/net/pcnet32.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
Index: b/drivers/net/pcnet32.c
===================================================================
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1719,7 +1719,9 @@ pcnet32_probe1(unsigned long ioaddr, int
ret = -ENOMEM;
goto err_release_region;
}
- SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pdev)
+ SET_NETDEV_DEV(dev, &pdev->dev);
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
@@ -1818,7 +1820,6 @@ pcnet32_probe1(unsigned long ioaddr, int
spin_lock_init(&lp->lock);
- SET_NETDEV_DEV(dev, &pdev->dev);
lp->name = chipname;
lp->shared_irq = shared;
lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */
@@ -2089,6 +2090,7 @@ static void pcnet32_free_ring(struct net
static int pcnet32_open(struct net_device *dev)
{
struct pcnet32_private *lp = netdev_priv(dev);
+ struct pci_dev *pdev = lp->pci_dev;
unsigned long ioaddr = dev->base_addr;
u16 val;
int i;
@@ -2149,9 +2151,9 @@ static int pcnet32_open(struct net_devic
lp->a.write_csr(ioaddr, 124, val);
/* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */
- if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
- (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
- lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
+ if (pdev && pdev->subsystem_vendor == PCI_VENDOR_ID_AT &&
+ (pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
+ pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
if (lp->options & PCNET32_PORT_ASEL) {
lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
if (netif_msg_link(lp))
next prev parent reply other threads:[~2009-07-31 18:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-30 21:17 [PATCH] pcnet32: VLB support fixes Bartlomiej Zolnierkiewicz
2009-07-30 21:32 ` Jeff Garzik
2009-07-30 21:46 ` Bartlomiej Zolnierkiewicz
2009-07-30 21:58 ` Jeff Garzik
2009-07-30 22:25 ` Bartlomiej Zolnierkiewicz
2009-07-31 18:45 ` Don Fry [this message]
2009-07-31 18:45 ` Don Fry
2009-08-02 19:30 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1249065929.4229.3.camel@localhost.localdomain \
--to=pcnet32@verizon.net \
--cc=bzolnier@gmail.com \
--cc=corbet@lwn.net \
--cc=error27@gmail.com \
--cc=eteo@redhat.com \
--cc=julia@diku.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.