From: Artem Bityutskiy <dedekind1@gmail.com>
To: Anton Vorontsov <avorontsov@mvista.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>,
Mike Frysinger <vapier.adi@gmail.com>,
Barry Song <21cnbao@gmail.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
linux-mtd@lists.infradead.org,
uclinux-dist-devel@blackfin.uclinux.org,
Andrew Morton <akpm@linux-foundation.org>,
David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH 1/2] mtd: m25p80: Fix false-positive probing
Date: Thu, 08 Jul 2010 08:57:24 +0300 [thread overview]
Message-ID: <1278568644.12733.35.camel@localhost> (raw)
In-Reply-To: <20100622165734.GA20699@oksana.dev.rtsoft.ru>
On Tue, 2010-06-22 at 20:57 +0400, Anton Vorontsov wrote:
> Since commit 18c6182bae0acca220ed6611f741034d563cd19f ("Rework
> probing/JEDEC code"), m25p80 driver successfully registers chips
> even if JEDEC probing fails.
>
> This was needed to support non-JEDEC flashes. Though, it appears
> that some platforms (e.g. blackfin bf533 stamp[1]) used the old
> behavior to detect if there's any flash connected, so the driver
> have to fail on JEDEC probing errors.
>
> This patch restores the old behavior for JEDEC flashes, and adds
> "-nonjedec" SPI device IDs for M25Pxx flashes, so that the kernel
> still supports non-JEDEC flashes.
>
> [1] http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=5975
>
> Reported-by: Mingquan Pan
> Reported-by: Barry Song <21cnbao@gmail.com>
> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
> ---
Pushed both patches to my l2-mtd-2.6.git / dunno, added Mike's ack.
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
WARNING: multiple messages have this Message-ID (diff)
From: Artem Bityutskiy <dedekind1@gmail.com>
To: Anton Vorontsov <avorontsov@mvista.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
Barry Song <21cnbao@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
Mike Frysinger <vapier.adi@gmail.com>,
David Brownell <dbrownell@users.sourceforge.net>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
linux-mtd@lists.infradead.org,
uclinux-dist-devel@blackfin.uclinux.org
Subject: Re: [PATCH 1/2] mtd: m25p80: Fix false-positive probing
Date: Thu, 08 Jul 2010 08:57:24 +0300 [thread overview]
Message-ID: <1278568644.12733.35.camel@localhost> (raw)
In-Reply-To: <20100622165734.GA20699@oksana.dev.rtsoft.ru>
On Tue, 2010-06-22 at 20:57 +0400, Anton Vorontsov wrote:
> Since commit 18c6182bae0acca220ed6611f741034d563cd19f ("Rework
> probing/JEDEC code"), m25p80 driver successfully registers chips
> even if JEDEC probing fails.
>
> This was needed to support non-JEDEC flashes. Though, it appears
> that some platforms (e.g. blackfin bf533 stamp[1]) used the old
> behavior to detect if there's any flash connected, so the driver
> have to fail on JEDEC probing errors.
>
> This patch restores the old behavior for JEDEC flashes, and adds
> "-nonjedec" SPI device IDs for M25Pxx flashes, so that the kernel
> still supports non-JEDEC flashes.
>
> [1] http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=5975
>
> Reported-by: Mingquan Pan
> Reported-by: Barry Song <21cnbao@gmail.com>
> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
> ---
Pushed both patches to my l2-mtd-2.6.git / dunno, added Mike's ack.
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
next prev parent reply other threads:[~2010-07-08 6:01 UTC|newest]
Thread overview: 131+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-31 0:39 [PATCH v2 0/6] Device table matching for SPI subsystem Anton Vorontsov
2009-07-31 0:39 ` Anton Vorontsov
2009-07-31 0:39 ` Anton Vorontsov
2009-07-31 0:39 ` [lm-sensors] " Anton Vorontsov
2009-07-31 0:40 ` [PATCH 1/6] spi: Add support for device table matching Anton Vorontsov
2009-07-31 0:40 ` Anton Vorontsov
2009-07-31 0:40 ` Anton Vorontsov
2009-07-31 0:40 ` [lm-sensors] " Anton Vorontsov
2009-07-31 0:41 ` [PATCH 2/6] mtd: m25p80: Convert to " Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` [lm-sensors] [PATCH 2/6] mtd: m25p80: Convert to device table Anton Vorontsov
2009-08-04 2:54 ` [PATCH 2/6] mtd: m25p80: Convert to device table matching David Brownell
2009-08-04 2:54 ` David Brownell
2009-08-04 2:54 ` David Brownell
2009-08-04 2:54 ` [lm-sensors] [PATCH 2/6] mtd: m25p80: Convert to device table David Brownell
2009-08-18 21:44 ` [PATCH 2/6] mtd: m25p80: Convert to device table matching Anton Vorontsov
2009-08-18 21:44 ` Anton Vorontsov
2009-08-18 21:44 ` Anton Vorontsov
2009-08-18 21:44 ` [lm-sensors] [PATCH 2/6] mtd: m25p80: Convert to device table Anton Vorontsov
2009-08-18 21:46 ` [PATCH 1/2] mtd: m25p80: Rework probing/JEDEC code Anton Vorontsov
2009-08-18 21:46 ` Anton Vorontsov
2010-06-12 6:27 ` Barry Song
2010-06-12 6:27 ` Barry Song
2010-06-12 6:27 ` Barry Song
2010-06-18 13:32 ` Anton Vorontsov
2010-06-18 13:32 ` Anton Vorontsov
2010-06-21 2:42 ` [Uclinux-dist-devel] [PATCH 1/2] mtd: m25p80: Reworkprobing/JEDEC code Song, Barry
2010-06-21 2:42 ` Song, Barry
2010-06-21 2:42 ` Song, Barry
2010-06-21 3:27 ` Barry Song
2010-06-21 3:27 ` Barry Song
2010-06-21 3:27 ` Barry Song
2010-06-21 7:15 ` Anton Vorontsov
2010-06-21 7:15 ` Anton Vorontsov
2010-06-21 7:22 ` Barry Song
2010-06-21 7:22 ` Barry Song
2010-06-21 7:22 ` Barry Song
2010-06-21 7:39 ` Anton Vorontsov
2010-06-21 7:39 ` Anton Vorontsov
2010-06-21 10:31 ` Barry Song
2010-06-21 10:31 ` Barry Song
2010-06-21 10:31 ` Barry Song
2010-06-21 11:20 ` Anton Vorontsov
2010-06-21 11:20 ` Anton Vorontsov
2010-06-21 16:34 ` Mike Frysinger
2010-06-21 16:34 ` Mike Frysinger
2010-06-21 16:34 ` Mike Frysinger
2010-06-21 16:47 ` Anton Vorontsov
2010-06-21 16:47 ` Anton Vorontsov
2010-06-21 16:54 ` Mike Frysinger
2010-06-21 16:54 ` Mike Frysinger
2010-06-21 16:54 ` Mike Frysinger
2010-06-22 6:37 ` Barry Song
2010-06-22 6:37 ` Barry Song
2010-06-22 6:37 ` Barry Song
2010-06-22 16:55 ` Anton Vorontsov
2010-06-22 16:55 ` Anton Vorontsov
2010-06-22 16:57 ` [PATCH 1/2] mtd: m25p80: Fix false-positive probing Anton Vorontsov
2010-06-22 16:57 ` Anton Vorontsov
2010-06-22 17:56 ` Mike Frysinger
2010-06-22 17:56 ` Mike Frysinger
2010-07-08 5:57 ` Artem Bityutskiy [this message]
2010-07-08 5:57 ` Artem Bityutskiy
2010-06-22 16:57 ` [PATCH 2/2] mtd: m25p80: Make jedec_probe() return proper errno values Anton Vorontsov
2010-06-22 16:57 ` Anton Vorontsov
2009-08-18 21:46 ` [PATCH 2/2] mtd: m25p80: Add support for CAT25xxx serial EEPROMs Anton Vorontsov
2009-08-18 21:46 ` Anton Vorontsov
2009-09-22 23:25 ` Andrew Morton
2009-09-22 23:25 ` Andrew Morton
2009-09-22 23:40 ` Anton Vorontsov
2009-09-22 23:40 ` Anton Vorontsov
2009-09-22 23:40 ` Anton Vorontsov
2009-09-22 21:17 ` [PATCH 2/6] mtd: m25p80: Convert to device table matching Andrew Morton
2009-09-22 21:17 ` Andrew Morton
2009-09-22 21:17 ` Andrew Morton
2009-09-22 23:01 ` Anton Vorontsov
2009-09-22 23:01 ` Anton Vorontsov
2009-09-22 23:01 ` Anton Vorontsov
2009-09-22 23:43 ` David Woodhouse
2009-09-22 23:43 ` David Woodhouse
2009-09-22 23:43 ` David Woodhouse
2009-09-22 23:52 ` Andrew Morton
2009-09-22 23:52 ` Andrew Morton
2009-09-22 23:52 ` Andrew Morton
2009-09-22 23:55 ` Anton Vorontsov
2009-09-22 23:55 ` Anton Vorontsov
2009-09-22 23:55 ` Anton Vorontsov
2009-09-23 0:02 ` Andrew Morton
2009-09-23 0:02 ` Andrew Morton
2009-09-23 0:02 ` Andrew Morton
2009-08-12 20:45 ` Michael Barkowski
2009-08-12 20:45 ` Michael Barkowski
2009-08-12 20:45 ` Michael Barkowski
2009-08-12 20:45 ` [lm-sensors] [PATCH 2/6] mtd: m25p80: Convert to device table Michael Barkowski
2009-08-12 20:58 ` [PATCH 2/6] mtd: m25p80: Convert to device table matching Anton Vorontsov
2009-08-12 20:58 ` Anton Vorontsov
2009-08-12 20:58 ` Anton Vorontsov
2009-08-12 20:58 ` [lm-sensors] [PATCH 2/6] mtd: m25p80: Convert to device table Anton Vorontsov
2009-08-12 20:58 ` [PATCH 2/6] mtd: m25p80: Convert to device table matching Michael Barkowski
2009-08-12 20:58 ` Michael Barkowski
2009-08-12 20:58 ` Michael Barkowski
2009-08-12 20:58 ` [lm-sensors] [PATCH 2/6] mtd: m25p80: Convert to device table Michael Barkowski
2009-07-31 0:41 ` [PATCH 3/6] of: Remove "stm,m25p40" alias Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` [lm-sensors] " Anton Vorontsov
2009-07-31 0:41 ` [PATCH 4/6] hwmon: adxx: Convert to device table matching Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` [lm-sensors] [PATCH 4/6] hwmon: adxx: Convert to device table Anton Vorontsov
2009-07-31 0:41 ` [PATCH 5/6] hwmon: lm70: Convert to device table matching Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` [lm-sensors] [PATCH 5/6] hwmon: lm70: Convert to device table Anton Vorontsov
2009-07-31 0:41 ` [PATCH 6/6] spi: Prefix modalias with "spi:" Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` Anton Vorontsov
2009-07-31 0:41 ` [lm-sensors] " Anton Vorontsov
2009-08-10 7:35 ` [PATCH v2 0/6] Device table matching for SPI subsystem Artem Bityutskiy
2009-08-10 7:35 ` Artem Bityutskiy
2009-08-10 7:35 ` Artem Bityutskiy
2009-08-10 7:35 ` [lm-sensors] [PATCH v2 0/6] Device table matching for SPI Artem Bityutskiy
2009-08-18 21:44 ` [PATCH v2 0/6] Device table matching for SPI subsystem Anton Vorontsov
2009-08-18 21:44 ` Anton Vorontsov
2009-08-18 21:44 ` Anton Vorontsov
2009-08-18 21:44 ` [lm-sensors] [PATCH v2 0/6] Device table matching for SPI Anton Vorontsov
2009-08-25 14:14 ` [PATCH v2 0/6] Device table matching for SPI subsystem Artem Bityutskiy
2009-08-25 14:14 ` Artem Bityutskiy
2009-08-25 14:14 ` Artem Bityutskiy
2009-08-25 14:14 ` [lm-sensors] [PATCH v2 0/6] Device table matching for SPI Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1278568644.12733.35.camel@localhost \
--to=dedekind1@gmail.com \
--cc=21cnbao@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=avorontsov@mvista.com \
--cc=dbrownell@users.sourceforge.net \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
--cc=vapier.adi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.