From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Subject: [Qemu-devel] [PATCH 12/20] [MIPS] qdev: convert g364fb to rc4030 device
Date: Sun, 1 Aug 2010 19:37:14 +0200 [thread overview]
Message-ID: <1280684242-19611-12-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <4C5579DA.8050508@reactos.org>
Use it in Jazz emulation
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
hw/g364fb.c | 62 +++++++++++++++++++++++++++++++++++++++++--------------
hw/mips.h | 5 ----
hw/mips_jazz.c | 2 +-
vl.c | 1 +
4 files changed, 48 insertions(+), 22 deletions(-)
diff --git a/hw/g364fb.c b/hw/g364fb.c
index 3c8fb98..4b5e6ef 100644
--- a/hw/g364fb.c
+++ b/hw/g364fb.c
@@ -21,6 +21,8 @@
#include "mips.h"
#include "console.h"
#include "pixel_ops.h"
+#include "rc4030.h"
+#include "qdev-addr.h"
//#define DEBUG_G364
@@ -37,7 +39,7 @@ typedef struct G364State {
/* hardware */
uint8_t *vram;
ram_addr_t vram_offset;
- int vram_size;
+ uint32_t vram_size;
qemu_irq irq;
/* registers */
uint8_t color_palette[256][3];
@@ -53,6 +55,14 @@ typedef struct G364State {
int blanked;
} G364State;
+typedef struct RC4030G364State {
+ RC4030Device dev;
+ target_phys_addr_t iobase;
+ target_phys_addr_t vram;
+ uint32_t irq;
+ G364State state;
+} RC4030G364State;
+
#define REG_ID 0x000000
#define REG_BOOT 0x080000
#define REG_DISPLAY 0x080118
@@ -279,9 +289,8 @@ static inline void g364fb_invalidate_display(void *opaque)
}
}
-static void g364fb_reset(void *opaque)
+static void g364fb_reset(G364State *s)
{
- G364State *s = opaque;
qemu_irq_lower(s->irq);
memset(s->color_palette, 0, sizeof(s->color_palette));
@@ -292,7 +301,13 @@ static void g364fb_reset(void *opaque)
s->top_of_screen = 0;
s->width = s->height = 0;
memset(s->vram, 0, s->vram_size);
- g364fb_invalidate_display(opaque);
+ g364fb_invalidate_display(s);
+}
+
+static void g364fb_reset1(DeviceState *d)
+{
+ G364State *s = &container_of(d, RC4030G364State, dev.qdev)->state;
+ g364fb_reset(s);
}
static void g364fb_screen_dump(void *opaque, const char *filename)
@@ -583,32 +598,47 @@ static void g364fb_save(QEMUFile *f, void *opaque)
qemu_put_be32(f, s->height);
}
-int g364fb_mm_init(target_phys_addr_t vram_base,
- target_phys_addr_t ctrl_base, int it_shift,
- qemu_irq irq)
+static int g364fb_init(RC4030Device *dev)
{
- G364State *s;
+ RC4030G364State *rc4030 = container_of(dev, RC4030G364State, dev);
+ G364State *s = &rc4030->state;
int io_ctrl;
- s = qemu_mallocz(sizeof(G364State));
-
- s->vram_size = 8 * 1024 * 1024;
s->vram_offset = qemu_ram_alloc(NULL, "g364fb.vram", s->vram_size);
s->vram = qemu_get_ram_ptr(s->vram_offset);
- s->irq = irq;
+ rc4030_init_irq(dev, &s->irq, rc4030->irq);
- qemu_register_reset(g364fb_reset, s);
register_savevm(NULL, "g364fb", 0, 1, g364fb_save, g364fb_load, s);
- g364fb_reset(s);
s->ds = graphic_console_init(g364fb_update_display,
g364fb_invalidate_display,
g364fb_screen_dump, NULL, s);
- cpu_register_physical_memory(vram_base, s->vram_size, s->vram_offset);
+ cpu_register_physical_memory(rc4030->vram, s->vram_size, s->vram_offset);
io_ctrl = cpu_register_io_memory(g364fb_ctrl_read, g364fb_ctrl_write, s);
- cpu_register_physical_memory(ctrl_base, 0x200000, io_ctrl);
+ cpu_register_physical_memory(rc4030->iobase, 0x200000, io_ctrl);
return 0;
}
+
+static RC4030DeviceInfo g364fb_device_info = {
+ .qdev.name = "rc4030-g364fb",
+ .qdev.size = sizeof(RC4030G364State),
+ .qdev.reset = g364fb_reset1,
+ .init = g364fb_init,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_TADDR("iobase", RC4030G364State, iobase, 0x60000000),
+ DEFINE_PROP_TADDR("vram", RC4030G364State, vram, 0x40000000),
+ DEFINE_PROP_HEX32("vram_size", RC4030G364State, state.vram_size, 8 * 1024 * 1024),
+ DEFINE_PROP_UINT32("irq", RC4030G364State, irq, 3),
+ DEFINE_PROP_END_OF_LIST(),
+ },
+};
+
+static void g364fb_register_devices(void)
+{
+ rc4030_qdev_register(&g364fb_device_info);
+}
+
+device_init(g364fb_register_devices)
diff --git a/hw/mips.h b/hw/mips.h
index 023d85c..aa790d8 100644
--- a/hw/mips.h
+++ b/hw/mips.h
@@ -12,11 +12,6 @@ PCIBus *bonito_init(qemu_irq *pic);
void *ds1225y_init(target_phys_addr_t mem_base, const char *filename);
void ds1225y_set_protection(void *opaque, int protection);
-/* g364fb.c */
-int g364fb_mm_init(target_phys_addr_t vram_base,
- target_phys_addr_t ctrl_base, int it_shift,
- qemu_irq irq);
-
/* mipsnet.c */
void mipsnet_init(int base, qemu_irq irq, NICInfo *nd);
diff --git a/hw/mips_jazz.c b/hw/mips_jazz.c
index 96946e8..c4f3721 100644
--- a/hw/mips_jazz.c
+++ b/hw/mips_jazz.c
@@ -206,7 +206,7 @@ void mips_jazz_init (ram_addr_t ram_size,
if (vga_interface_type != VGA_NONE) {
switch (jazz_model) {
case JAZZ_MAGNUM:
- g364fb_mm_init(0x40000000, 0x60000000, 0, rc4030[3]);
+ rc4030_create_simple("rc4030-g364fb");
break;
case JAZZ_PICA61:
isa_create_simple("isa-vga-mm");
diff --git a/vl.c b/vl.c
index 9815f8d..eb4c212 100644
--- a/vl.c
+++ b/vl.c
@@ -266,6 +266,7 @@ static struct {
{ .driver = "cirrus-vga", .flag = &default_vga },
{ .driver = "vmware-svga", .flag = &default_vga },
{ .driver = "isa-vga-mm", .flag = &default_vga },
+ { .driver = "rc4030-g364fb", .flag = &default_vga },
};
static int default_driver_check(QemuOpts *opts, void *opaque)
--
1.7.1.GIT
next prev parent reply other threads:[~2010-08-01 18:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-01 13:42 [Qemu-devel] [PATCH 00/20] MIPS Magnum conversion to qdev Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 01/20] [MIPS] cpu: add a init inplace method Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 02/20] [MIPS] cpu: convert to qdev Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 03/20] [MIPS] Jazz emulation: create a qdev cpu Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 04/20] [MIPS] rc4030: convert to qdev Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 05/20] Add a stub for some rc4030 functions, if rc4030 support is not compiled in Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 06/20] [MIPS] qdev: convert i8042 to rc4030 device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 07/20] [MIPS] qdev: convert parallel port " Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 08/20] [MIPS] qdev: convert serial " Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 09/20] [MIPS] qdev: convert jazz-led to sysbus device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 10/20] [MIPS] Jazz emulation: make video card optional Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 11/20] [MIPS] qdev: convert vga-isa-mm to ISA device Hervé Poussineau
2010-08-01 17:37 ` Hervé Poussineau [this message]
2010-08-01 17:37 ` [Qemu-devel] [PATCH 13/20] [MIPS] qdev: add a rtc forwarder device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 14/20] [MIPS] qdev: add an isa bus device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 15/20] [MIPS] qdev: convert dp83932 network card to rc4030 device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 16/20] [MIPS] qdev: convert floppy disk controller " Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 17/20] [MIPS] qdev: convert esp scsi adapter " Hervé Poussineau
2010-08-02 14:51 ` Artyom Tarasenko
2010-08-01 17:37 ` [Qemu-devel] [PATCH 18/20] [MIPS] qdev: convert ds1225y nvram to sysbus device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 19/20] [MIPS] qdev: add a mips board device, which initializes the ram and the rom Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 20/20] [MIPS] qdev: Complete rc4030 conversion, by removing legacy stuff Hervé Poussineau
2010-08-02 16:06 ` [Qemu-devel] [PATCH 00/20] MIPS Magnum conversion to qdev Blue Swirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280684242-19611-12-git-send-email-hpoussin@reactos.org \
--to=hpoussin@reactos.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.