All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Subject: [Qemu-devel] [PATCH 15/20] [MIPS] qdev: convert dp83932 network card to rc4030 device
Date: Sun,  1 Aug 2010 19:37:17 +0200	[thread overview]
Message-ID: <1280684242-19611-15-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <4C5579DA.8050508@reactos.org>

Use it in Jazz emulation
Remove dp83932_init() function, which is not used anymore

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
 hw/dp8393x.c   |   64 ++++++++++++++++++++++++++++++++++++-------------------
 hw/mips.h      |    5 ----
 hw/mips_jazz.c |    6 +++-
 3 files changed, 46 insertions(+), 29 deletions(-)

diff --git a/hw/dp8393x.c b/hw/dp8393x.c
index e65e4d1..f8fd9f5 100644
--- a/hw/dp8393x.c
+++ b/hw/dp8393x.c
@@ -21,6 +21,8 @@
 #include "qemu-timer.h"
 #include "net.h"
 #include "mips.h"
+#include "rc4030.h"
+#include "qdev-addr.h"
 
 //#define DEBUG_SONIC
 
@@ -147,7 +149,7 @@ do { printf("sonic ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } while (0)
 
 typedef struct dp8393xState {
     /* Hardware */
-    int it_shift;
+    uint32_t it_shift;
     qemu_irq irq;
 #ifdef DEBUG_SONIC
     int irq_level;
@@ -869,8 +871,6 @@ static void nic_cleanup(VLANClientState *nc)
 
     qemu_del_timer(s->watchdog);
     qemu_free_timer(s->watchdog);
-
-    qemu_free(s);
 }
 
 static NetClientInfo net_dp83932_info = {
@@ -881,33 +881,53 @@ static NetClientInfo net_dp83932_info = {
     .cleanup = nic_cleanup,
 };
 
-void dp83932_init(NICInfo *nd, target_phys_addr_t base, int it_shift,
-                  qemu_irq irq, void* mem_opaque,
-                  void (*memory_rw)(void *opaque, target_phys_addr_t addr, uint8_t *buf, int len, int is_write))
-{
-    dp8393xState *s;
-
-    qemu_check_nic_model(nd, "dp83932");
+typedef struct RC4030dp83932State {
+    RC4030Device dev;
+    target_phys_addr_t iobase;
+    uint32_t irq;
+    dp8393xState state;
+} RC4030dp83932State;
 
-    s = qemu_mallocz(sizeof(dp8393xState));
+static int dp83932_rc4030_init(RC4030Device *dev)
+{
+    RC4030dp83932State *rc4030 = DO_UPCAST(RC4030dp83932State, dev, dev);
+    dp8393xState *s = &rc4030->state;
 
-    s->mem_opaque = mem_opaque;
-    s->memory_rw = memory_rw;
-    s->it_shift = it_shift;
-    s->irq = irq;
+    s->mem_opaque = rc4030_get_opaque();
+    s->memory_rw = rc4030_dma_memory_rw;
+    rc4030_init_irq(dev, &s->irq, rc4030->irq);
     s->watchdog = qemu_new_timer(vm_clock, dp8393x_watchdog, s);
     s->regs[SONIC_SR] = 0x0004; /* only revision recognized by Linux */
 
-    memcpy(s->conf.macaddr.a, nd->macaddr, sizeof(s->conf.macaddr));
-    s->conf.vlan = nd->vlan;
-    s->conf.peer = nd->netdev;
-
-    s->nic = qemu_new_nic(&net_dp83932_info, &s->conf, nd->model, nd->name, s);
-
+    qemu_macaddr_default_if_unset(&s->conf.macaddr);
+    s->nic = qemu_new_nic(&net_dp83932_info, &s->conf, dev->qdev.info->name, dev->qdev.id, s);
     qemu_format_nic_info_str(&s->nic->nc, s->conf.macaddr.a);
+
     qemu_register_reset(nic_reset, s);
     nic_reset(s);
 
     s->mmio_index = cpu_register_io_memory(dp8393x_read, dp8393x_write, s);
-    cpu_register_physical_memory(base, 0x40 << it_shift, s->mmio_index);
+    cpu_register_physical_memory(rc4030->iobase, 0x40 << s->it_shift, s->mmio_index);
+
+    return 0;
 }
+
+static RC4030DeviceInfo dp83932_rc4030_info = {
+    .qdev.name  = "rc4030-dp83932",
+    .qdev.size  = sizeof(RC4030dp83932State),
+    .init       = dp83932_rc4030_init,
+    .qdev.props = (Property[]) {
+        DEFINE_PROP_TADDR("iobase",   RC4030dp83932State, iobase,         0x80001000),
+        DEFINE_PROP_UINT32("itshift", RC4030dp83932State, state.it_shift, 2),
+        DEFINE_PROP_UINT32("irq",     RC4030dp83932State, irq,            4),
+        DEFINE_NIC_PROPERTIES(        RC4030dp83932State, state.conf),
+        DEFINE_PROP_END_OF_LIST(),
+    },
+};
+
+static void dp8393x_register_devices(void)
+{
+    rc4030_qdev_register(&dp83932_rc4030_info);
+}
+
+device_init(dp8393x_register_devices)
diff --git a/hw/mips.h b/hw/mips.h
index aa790d8..d8e4954 100644
--- a/hw/mips.h
+++ b/hw/mips.h
@@ -15,9 +15,4 @@ void ds1225y_set_protection(void *opaque, int protection);
 /* mipsnet.c */
 void mipsnet_init(int base, qemu_irq irq, NICInfo *nd);
 
-/* dp8393x.c */
-void dp83932_init(NICInfo *nd, target_phys_addr_t base, int it_shift,
-                  qemu_irq irq, void* mem_opaque,
-                  void (*memory_rw)(void *opaque, target_phys_addr_t addr, uint8_t *buf, int len, int is_write));
-
 #endif
diff --git a/hw/mips_jazz.c b/hw/mips_jazz.c
index cf0001e..c0a27b2 100644
--- a/hw/mips_jazz.c
+++ b/hw/mips_jazz.c
@@ -192,8 +192,10 @@ void mips_jazz_init (ram_addr_t ram_size,
         if (!nd->model)
             nd->model = qemu_strdup("dp83932");
         if (strcmp(nd->model, "dp83932") == 0) {
-            dp83932_init(nd, 0x80001000, 2, rc4030[4],
-                         rc4030_opaque, rc4030_dma_memory_rw);
+            qemu_check_nic_model(nd, nd->model);
+            dev = qdev_create(NULL, nd->model);
+            qdev_set_nic_properties(dev, nd);
+            qdev_init_nofail(dev);
             break;
         } else if (strcmp(nd->model, "?") == 0) {
             fprintf(stderr, "qemu: Supported NICs: dp83932\n");
-- 
1.7.1.GIT

  parent reply	other threads:[~2010-08-01 18:11 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-01 13:42 [Qemu-devel] [PATCH 00/20] MIPS Magnum conversion to qdev Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 01/20] [MIPS] cpu: add a init inplace method Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 02/20] [MIPS] cpu: convert to qdev Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 03/20] [MIPS] Jazz emulation: create a qdev cpu Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 04/20] [MIPS] rc4030: convert to qdev Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 05/20] Add a stub for some rc4030 functions, if rc4030 support is not compiled in Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 06/20] [MIPS] qdev: convert i8042 to rc4030 device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 07/20] [MIPS] qdev: convert parallel port " Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 08/20] [MIPS] qdev: convert serial " Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 09/20] [MIPS] qdev: convert jazz-led to sysbus device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 10/20] [MIPS] Jazz emulation: make video card optional Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 11/20] [MIPS] qdev: convert vga-isa-mm to ISA device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 12/20] [MIPS] qdev: convert g364fb to rc4030 device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 13/20] [MIPS] qdev: add a rtc forwarder device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 14/20] [MIPS] qdev: add an isa bus device Hervé Poussineau
2010-08-01 17:37 ` Hervé Poussineau [this message]
2010-08-01 17:37 ` [Qemu-devel] [PATCH 16/20] [MIPS] qdev: convert floppy disk controller to rc4030 device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 17/20] [MIPS] qdev: convert esp scsi adapter " Hervé Poussineau
2010-08-02 14:51   ` Artyom Tarasenko
2010-08-01 17:37 ` [Qemu-devel] [PATCH 18/20] [MIPS] qdev: convert ds1225y nvram to sysbus device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 19/20] [MIPS] qdev: add a mips board device, which initializes the ram and the rom Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 20/20] [MIPS] qdev: Complete rc4030 conversion, by removing legacy stuff Hervé Poussineau
2010-08-02 16:06 ` [Qemu-devel] [PATCH 00/20] MIPS Magnum conversion to qdev Blue Swirl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1280684242-19611-15-git-send-email-hpoussin@reactos.org \
    --to=hpoussin@reactos.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.