All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Subject: [Qemu-devel] [PATCH 07/20] [MIPS] qdev: convert parallel port to rc4030 device
Date: Sun,  1 Aug 2010 19:37:09 +0200	[thread overview]
Message-ID: <1280684242-19611-7-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <4C5579DA.8050508@reactos.org>

Use it in Jazz emulation
Remove parallel_mm_init() function, which is not used anymore

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
 hw/mips_jazz.c |    5 ++-
 hw/parallel.c  |   58 +++++++++++++++++++++++++++++++++++++++++++++----------
 hw/pc.h        |    2 +-
 3 files changed, 51 insertions(+), 14 deletions(-)

diff --git a/hw/mips_jazz.c b/hw/mips_jazz.c
index 9663a3c..a027559 100644
--- a/hw/mips_jazz.c
+++ b/hw/mips_jazz.c
@@ -271,8 +271,9 @@ void mips_jazz_init (ram_addr_t ram_size,
     }
 
     /* Parallel port */
-    if (parallel_hds[0])
-        parallel_mm_init(0x80008000, 0, rc4030[0], parallel_hds[0]);
+    if (parallel_hds[0]) {
+        parallel_rc4030_init(parallel_hds[0]);
+    }
 
     /* Sound card */
     /* FIXME: missing Jazz sound at 0x8000c000, rc4030[2] */
diff --git a/hw/parallel.c b/hw/parallel.c
index 6b11672..cb36fba 100644
--- a/hw/parallel.c
+++ b/hw/parallel.c
@@ -27,6 +27,8 @@
 #include "isa.h"
 #include "pc.h"
 #include "sysemu.h"
+#include "rc4030.h"
+#include "qdev-addr.h"
 
 //#define DEBUG_PARALLEL
 
@@ -87,6 +89,13 @@ typedef struct ISAParallelState {
     ParallelState state;
 } ISAParallelState;
 
+typedef struct RC4030ParallelState {
+    RC4030Device dev;
+    target_phys_addr_t iobase;
+    uint32_t irq;
+    ParallelState state;
+} RC4030ParallelState;
+
 static void parallel_update_irq(ParallelState *s)
 {
     if (s->irq_pending)
@@ -446,6 +455,12 @@ static void parallel_reset(void *opaque)
     s->last_read_offset = ~0U;
 }
 
+static void parallel_rc4030_reset(DeviceState *d)
+{
+    RC4030ParallelState *rc4030 = container_of(d, RC4030ParallelState, dev.qdev);
+    parallel_reset(&rc4030->state);
+}
+
 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
 
 static int parallel_isa_initfn(ISADevice *dev)
@@ -565,21 +580,28 @@ static CPUWriteMemoryFunc * const parallel_mm_write_sw[] = {
     &parallel_mm_writel,
 };
 
-/* If fd is zero, it means that the parallel device uses the console */
-ParallelState *parallel_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq, CharDriverState *chr)
+static int parallel_rc4030_initfn(RC4030Device *dev)
 {
-    ParallelState *s;
+    RC4030ParallelState *s = container_of(dev, RC4030ParallelState, dev);
     int io_sw;
 
-    s = qemu_mallocz(sizeof(ParallelState));
-    s->irq = irq;
-    s->chr = chr;
-    s->it_shift = it_shift;
-    qemu_register_reset(parallel_reset, s);
+    rc4030_init_irq(dev, &s->state.irq, s->irq);
+
+    io_sw = cpu_register_io_memory(parallel_mm_read_sw, parallel_mm_write_sw, &s->state);
+    cpu_register_physical_memory(s->iobase, 8, io_sw);
+
+    return 0;
+}
 
-    io_sw = cpu_register_io_memory(parallel_mm_read_sw, parallel_mm_write_sw, s);
-    cpu_register_physical_memory(base, 8 << it_shift, io_sw);
-    return s;
+ParallelState *parallel_rc4030_init(CharDriverState *chr)
+{
+    RC4030Device *dev;
+
+    dev = rc4030_create("rc4030-parallel");
+    qdev_prop_set_chr(&dev->qdev, "chardev", chr);
+    if (qdev_init(&dev->qdev) < 0)
+        return NULL;
+    return &DO_UPCAST(RC4030ParallelState, dev, dev)->state;
 }
 
 static ISADeviceInfo parallel_isa_info = {
@@ -595,9 +617,23 @@ static ISADeviceInfo parallel_isa_info = {
     },
 };
 
+static RC4030DeviceInfo parallel_rc4030_info = {
+    .qdev.name  = "rc4030-parallel",
+    .qdev.size  = sizeof(RC4030ParallelState),
+    .qdev.reset = parallel_rc4030_reset,
+    .init       = parallel_rc4030_initfn,
+    .qdev.props = (Property[]) {
+        DEFINE_PROP_TADDR("iobase", RC4030ParallelState, iobase, 0x80008000),
+        DEFINE_PROP_UINT32("irq", RC4030ParallelState, irq, 0),
+        DEFINE_PROP_CHR("chardev", RC4030ParallelState, state.chr),
+        DEFINE_PROP_END_OF_LIST(),
+    },
+};
+
 static void parallel_register_devices(void)
 {
     isa_qdev_register(&parallel_isa_info);
+    rc4030_qdev_register(&parallel_rc4030_info);
 }
 
 device_init(parallel_register_devices)
diff --git a/hw/pc.h b/hw/pc.h
index e078fd9..61b5fbb 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -23,7 +23,7 @@ void serial_set_frequency(SerialState *s, uint32_t frequency);
 
 typedef struct ParallelState ParallelState;
 ParallelState *parallel_init(int index, CharDriverState *chr);
-ParallelState *parallel_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq, CharDriverState *chr);
+ParallelState *parallel_rc4030_init(CharDriverState *chr);
 
 /* i8259.c */
 
-- 
1.7.1.GIT

  parent reply	other threads:[~2010-08-01 18:11 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-01 13:42 [Qemu-devel] [PATCH 00/20] MIPS Magnum conversion to qdev Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 01/20] [MIPS] cpu: add a init inplace method Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 02/20] [MIPS] cpu: convert to qdev Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 03/20] [MIPS] Jazz emulation: create a qdev cpu Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 04/20] [MIPS] rc4030: convert to qdev Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 05/20] Add a stub for some rc4030 functions, if rc4030 support is not compiled in Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 06/20] [MIPS] qdev: convert i8042 to rc4030 device Hervé Poussineau
2010-08-01 17:37 ` Hervé Poussineau [this message]
2010-08-01 17:37 ` [Qemu-devel] [PATCH 08/20] [MIPS] qdev: convert serial port " Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 09/20] [MIPS] qdev: convert jazz-led to sysbus device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 10/20] [MIPS] Jazz emulation: make video card optional Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 11/20] [MIPS] qdev: convert vga-isa-mm to ISA device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 12/20] [MIPS] qdev: convert g364fb to rc4030 device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 13/20] [MIPS] qdev: add a rtc forwarder device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 14/20] [MIPS] qdev: add an isa bus device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 15/20] [MIPS] qdev: convert dp83932 network card to rc4030 device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 16/20] [MIPS] qdev: convert floppy disk controller " Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 17/20] [MIPS] qdev: convert esp scsi adapter " Hervé Poussineau
2010-08-02 14:51   ` Artyom Tarasenko
2010-08-01 17:37 ` [Qemu-devel] [PATCH 18/20] [MIPS] qdev: convert ds1225y nvram to sysbus device Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 19/20] [MIPS] qdev: add a mips board device, which initializes the ram and the rom Hervé Poussineau
2010-08-01 17:37 ` [Qemu-devel] [PATCH 20/20] [MIPS] qdev: Complete rc4030 conversion, by removing legacy stuff Hervé Poussineau
2010-08-02 16:06 ` [Qemu-devel] [PATCH 00/20] MIPS Magnum conversion to qdev Blue Swirl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1280684242-19611-7-git-send-email-hpoussin@reactos.org \
    --to=hpoussin@reactos.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.