From: Jarkko Nikula <jhnikula@gmail.com>
To: alsa-devel@alsa-project.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@slimlogic.co.uk>
Subject: [PATCH 1/3] ASoC: tlv320aic3x: Use snd_soc_read and snd_soc_write
Date: Tue, 14 Sep 2010 14:54:47 +0300 [thread overview]
Message-ID: <1284465289-4865-1-git-send-email-jhnikula@gmail.com> (raw)
Start phasing out aic3x_read_reg_cache, aic3x_write_reg_cache, aic3x_read and
aic3x_write calls in order to switch to soc-cache helpers.
This patch replaces aic3x_read_reg_cache and aic3x_write with snd_soc_read
and snd_soc_write. This is basically null-op since .read and .write in
soc_codec_dev_aic3x points to aic3x_read_reg_cache and aic3x_write.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
---
sound/soc/codecs/tlv320aic3x.c | 194 ++++++++++++++++++++--------------------
1 files changed, 98 insertions(+), 96 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 94dc707..138165c 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -839,8 +839,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
int clk;
/* select data word length */
- data =
- aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4));
+ data = snd_soc_read(codec, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4));
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
break;
@@ -854,7 +853,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
data |= (0x03 << 4);
break;
}
- aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, data);
+ snd_soc_write(codec, AIC3X_ASD_INTF_CTRLB, data);
/* Fsref can be 44100 or 48000 */
fsref = (params_rate(params) % 11025 == 0) ? 44100 : 48000;
@@ -869,17 +868,17 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
if (bypass_pll) {
pll_q &= 0xf;
- aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT);
- aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV);
+ snd_soc_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT);
+ snd_soc_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV);
/* disable PLL if it is bypassed */
- reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
- aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE);
+ reg = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
+ snd_soc_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE);
} else {
- aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV);
+ snd_soc_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV);
/* enable PLL when it is used */
- reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
- aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE);
+ reg = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
+ snd_soc_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE);
}
/* Route Left DAC to left channel input and
@@ -888,7 +887,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
data |= (fsref == 44100) ? FSREF_44100 : FSREF_48000;
if (params_rate(params) >= 64000)
data |= DUAL_RATE_MODE;
- aic3x_write(codec, AIC3X_CODEC_DATAPATH_REG, data);
+ snd_soc_write(codec, AIC3X_CODEC_DATAPATH_REG, data);
/* codec sample rate select */
data = (fsref * 20) / params_rate(params);
@@ -897,7 +896,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
data /= 5;
data -= 2;
data |= (data << 4);
- aic3x_write(codec, AIC3X_SAMPLE_RATE_SEL_REG, data);
+ snd_soc_write(codec, AIC3X_SAMPLE_RATE_SEL_REG, data);
if (bypass_pll)
return 0;
@@ -966,13 +965,16 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
}
found:
- data = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
- aic3x_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT));
- aic3x_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG, pll_r << PLLR_SHIFT);
- aic3x_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
- aic3x_write(codec, AIC3X_PLL_PROGC_REG, (pll_d >> 6) << PLLD_MSB_SHIFT);
- aic3x_write(codec, AIC3X_PLL_PROGD_REG,
- (pll_d & 0x3F) << PLLD_LSB_SHIFT);
+ data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
+ snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
+ data | (pll_p << PLLP_SHIFT));
+ snd_soc_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG,
+ pll_r << PLLR_SHIFT);
+ snd_soc_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
+ snd_soc_write(codec, AIC3X_PLL_PROGC_REG,
+ (pll_d >> 6) << PLLD_MSB_SHIFT);
+ snd_soc_write(codec, AIC3X_PLL_PROGD_REG,
+ (pll_d & 0x3F) << PLLD_LSB_SHIFT);
return 0;
}
@@ -980,15 +982,15 @@ found:
static int aic3x_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u8 ldac_reg = aic3x_read_reg_cache(codec, LDAC_VOL) & ~MUTE_ON;
- u8 rdac_reg = aic3x_read_reg_cache(codec, RDAC_VOL) & ~MUTE_ON;
+ u8 ldac_reg = snd_soc_read(codec, LDAC_VOL) & ~MUTE_ON;
+ u8 rdac_reg = snd_soc_read(codec, RDAC_VOL) & ~MUTE_ON;
if (mute) {
- aic3x_write(codec, LDAC_VOL, ldac_reg | MUTE_ON);
- aic3x_write(codec, RDAC_VOL, rdac_reg | MUTE_ON);
+ snd_soc_write(codec, LDAC_VOL, ldac_reg | MUTE_ON);
+ snd_soc_write(codec, RDAC_VOL, rdac_reg | MUTE_ON);
} else {
- aic3x_write(codec, LDAC_VOL, ldac_reg);
- aic3x_write(codec, RDAC_VOL, rdac_reg);
+ snd_soc_write(codec, LDAC_VOL, ldac_reg);
+ snd_soc_write(codec, RDAC_VOL, rdac_reg);
}
return 0;
@@ -1012,8 +1014,8 @@ static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai,
u8 iface_areg, iface_breg;
int delay = 0;
- iface_areg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLA) & 0x3f;
- iface_breg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & 0x3f;
+ iface_areg = snd_soc_read(codec, AIC3X_ASD_INTF_CTRLA) & 0x3f;
+ iface_breg = snd_soc_read(codec, AIC3X_ASD_INTF_CTRLB) & 0x3f;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -1052,9 +1054,9 @@ static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai,
}
/* set iface */
- aic3x_write(codec, AIC3X_ASD_INTF_CTRLA, iface_areg);
- aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, iface_breg);
- aic3x_write(codec, AIC3X_ASD_INTF_CTRLC, delay);
+ snd_soc_write(codec, AIC3X_ASD_INTF_CTRLA, iface_areg);
+ snd_soc_write(codec, AIC3X_ASD_INTF_CTRLB, iface_breg);
+ snd_soc_write(codec, AIC3X_ASD_INTF_CTRLC, delay);
return 0;
}
@@ -1072,18 +1074,18 @@ static int aic3x_set_bias_level(struct snd_soc_codec *codec,
if (codec->bias_level == SND_SOC_BIAS_STANDBY &&
aic3x->master) {
/* enable pll */
- reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
- aic3x_write(codec, AIC3X_PLL_PROGA_REG,
- reg | PLL_ENABLE);
+ reg = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
+ snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
+ reg | PLL_ENABLE);
}
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_PREPARE &&
aic3x->master) {
/* disable pll */
- reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
- aic3x_write(codec, AIC3X_PLL_PROGA_REG,
- reg & ~PLL_ENABLE);
+ reg = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
+ snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
+ reg & ~PLL_ENABLE);
}
break;
case SND_SOC_BIAS_OFF:
@@ -1098,8 +1100,8 @@ void aic3x_set_gpio(struct snd_soc_codec *codec, int gpio, int state)
{
u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
u8 bit = gpio ? 3: 0;
- u8 val = aic3x_read_reg_cache(codec, reg) & ~(1 << bit);
- aic3x_write(codec, reg, val | (!!state << bit));
+ u8 val = snd_soc_read(codec, reg) & ~(1 << bit);
+ snd_soc_write(codec, reg, val | (!!state << bit));
}
EXPORT_SYMBOL_GPL(aic3x_set_gpio);
@@ -1128,7 +1130,7 @@ void aic3x_set_headset_detection(struct snd_soc_codec *codec, int detect,
if (detect & AIC3X_HEADSET_DETECT_MASK)
val |= AIC3X_HEADSET_DETECT_ENABLED;
- aic3x_write(codec, AIC3X_HEADSET_DETECT_CTRL_A, val);
+ snd_soc_write(codec, AIC3X_HEADSET_DETECT_CTRL_A, val);
}
EXPORT_SYMBOL_GPL(aic3x_set_headset_detection);
@@ -1211,81 +1213,81 @@ static int aic3x_init(struct snd_soc_codec *codec)
struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec);
int reg;
- aic3x_write(codec, AIC3X_PAGE_SELECT, PAGE0_SELECT);
- aic3x_write(codec, AIC3X_RESET, SOFT_RESET);
+ snd_soc_write(codec, AIC3X_PAGE_SELECT, PAGE0_SELECT);
+ snd_soc_write(codec, AIC3X_RESET, SOFT_RESET);
/* DAC default volume and mute */
- aic3x_write(codec, LDAC_VOL, DEFAULT_VOL | MUTE_ON);
- aic3x_write(codec, RDAC_VOL, DEFAULT_VOL | MUTE_ON);
+ snd_soc_write(codec, LDAC_VOL, DEFAULT_VOL | MUTE_ON);
+ snd_soc_write(codec, RDAC_VOL, DEFAULT_VOL | MUTE_ON);
/* DAC to HP default volume and route to Output mixer */
- aic3x_write(codec, DACL1_2_HPLOUT_VOL, DEFAULT_VOL | ROUTE_ON);
- aic3x_write(codec, DACR1_2_HPROUT_VOL, DEFAULT_VOL | ROUTE_ON);
- aic3x_write(codec, DACL1_2_HPLCOM_VOL, DEFAULT_VOL | ROUTE_ON);
- aic3x_write(codec, DACR1_2_HPRCOM_VOL, DEFAULT_VOL | ROUTE_ON);
+ snd_soc_write(codec, DACL1_2_HPLOUT_VOL, DEFAULT_VOL | ROUTE_ON);
+ snd_soc_write(codec, DACR1_2_HPROUT_VOL, DEFAULT_VOL | ROUTE_ON);
+ snd_soc_write(codec, DACL1_2_HPLCOM_VOL, DEFAULT_VOL | ROUTE_ON);
+ snd_soc_write(codec, DACR1_2_HPRCOM_VOL, DEFAULT_VOL | ROUTE_ON);
/* DAC to Line Out default volume and route to Output mixer */
- aic3x_write(codec, DACL1_2_LLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
- aic3x_write(codec, DACR1_2_RLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
+ snd_soc_write(codec, DACL1_2_LLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
+ snd_soc_write(codec, DACR1_2_RLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
/* DAC to Mono Line Out default volume and route to Output mixer */
- aic3x_write(codec, DACL1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
- aic3x_write(codec, DACR1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
+ snd_soc_write(codec, DACL1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
+ snd_soc_write(codec, DACR1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
/* unmute all outputs */
- reg = aic3x_read_reg_cache(codec, LLOPM_CTRL);
- aic3x_write(codec, LLOPM_CTRL, reg | UNMUTE);
- reg = aic3x_read_reg_cache(codec, RLOPM_CTRL);
- aic3x_write(codec, RLOPM_CTRL, reg | UNMUTE);
- reg = aic3x_read_reg_cache(codec, MONOLOPM_CTRL);
- aic3x_write(codec, MONOLOPM_CTRL, reg | UNMUTE);
- reg = aic3x_read_reg_cache(codec, HPLOUT_CTRL);
- aic3x_write(codec, HPLOUT_CTRL, reg | UNMUTE);
- reg = aic3x_read_reg_cache(codec, HPROUT_CTRL);
- aic3x_write(codec, HPROUT_CTRL, reg | UNMUTE);
- reg = aic3x_read_reg_cache(codec, HPLCOM_CTRL);
- aic3x_write(codec, HPLCOM_CTRL, reg | UNMUTE);
- reg = aic3x_read_reg_cache(codec, HPRCOM_CTRL);
- aic3x_write(codec, HPRCOM_CTRL, reg | UNMUTE);
+ reg = snd_soc_read(codec, LLOPM_CTRL);
+ snd_soc_write(codec, LLOPM_CTRL, reg | UNMUTE);
+ reg = snd_soc_read(codec, RLOPM_CTRL);
+ snd_soc_write(codec, RLOPM_CTRL, reg | UNMUTE);
+ reg = snd_soc_read(codec, MONOLOPM_CTRL);
+ snd_soc_write(codec, MONOLOPM_CTRL, reg | UNMUTE);
+ reg = snd_soc_read(codec, HPLOUT_CTRL);
+ snd_soc_write(codec, HPLOUT_CTRL, reg | UNMUTE);
+ reg = snd_soc_read(codec, HPROUT_CTRL);
+ snd_soc_write(codec, HPROUT_CTRL, reg | UNMUTE);
+ reg = snd_soc_read(codec, HPLCOM_CTRL);
+ snd_soc_write(codec, HPLCOM_CTRL, reg | UNMUTE);
+ reg = snd_soc_read(codec, HPRCOM_CTRL);
+ snd_soc_write(codec, HPRCOM_CTRL, reg | UNMUTE);
/* ADC default volume and unmute */
- aic3x_write(codec, LADC_VOL, DEFAULT_GAIN);
- aic3x_write(codec, RADC_VOL, DEFAULT_GAIN);
+ snd_soc_write(codec, LADC_VOL, DEFAULT_GAIN);
+ snd_soc_write(codec, RADC_VOL, DEFAULT_GAIN);
/* By default route Line1 to ADC PGA mixer */
- aic3x_write(codec, LINE1L_2_LADC_CTRL, 0x0);
- aic3x_write(codec, LINE1R_2_RADC_CTRL, 0x0);
+ snd_soc_write(codec, LINE1L_2_LADC_CTRL, 0x0);
+ snd_soc_write(codec, LINE1R_2_RADC_CTRL, 0x0);
/* PGA to HP Bypass default volume, disconnect from Output Mixer */
- aic3x_write(codec, PGAL_2_HPLOUT_VOL, DEFAULT_VOL);
- aic3x_write(codec, PGAR_2_HPROUT_VOL, DEFAULT_VOL);
- aic3x_write(codec, PGAL_2_HPLCOM_VOL, DEFAULT_VOL);
- aic3x_write(codec, PGAR_2_HPRCOM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, PGAL_2_HPLOUT_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, PGAR_2_HPROUT_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, PGAL_2_HPLCOM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, PGAR_2_HPRCOM_VOL, DEFAULT_VOL);
/* PGA to Line Out default volume, disconnect from Output Mixer */
- aic3x_write(codec, PGAL_2_LLOPM_VOL, DEFAULT_VOL);
- aic3x_write(codec, PGAR_2_RLOPM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, PGAL_2_LLOPM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, PGAR_2_RLOPM_VOL, DEFAULT_VOL);
/* PGA to Mono Line Out default volume, disconnect from Output Mixer */
- aic3x_write(codec, PGAL_2_MONOLOPM_VOL, DEFAULT_VOL);
- aic3x_write(codec, PGAR_2_MONOLOPM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, PGAL_2_MONOLOPM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, PGAR_2_MONOLOPM_VOL, DEFAULT_VOL);
/* Line2 to HP Bypass default volume, disconnect from Output Mixer */
- aic3x_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL);
- aic3x_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL);
- aic3x_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL);
- aic3x_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL);
/* Line2 Line Out default volume, disconnect from Output Mixer */
- aic3x_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL);
- aic3x_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL);
/* Line2 to Mono Out default volume, disconnect from Output Mixer */
- aic3x_write(codec, LINE2L_2_MONOLOPM_VOL, DEFAULT_VOL);
- aic3x_write(codec, LINE2R_2_MONOLOPM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2L_2_MONOLOPM_VOL, DEFAULT_VOL);
+ snd_soc_write(codec, LINE2R_2_MONOLOPM_VOL, DEFAULT_VOL);
if (aic3x->model == AIC3X_MODEL_3007) {
/* Class-D speaker driver init; datasheet p. 46 */
- aic3x_write(codec, AIC3X_PAGE_SELECT, 0x0D);
- aic3x_write(codec, 0xD, 0x0D);
- aic3x_write(codec, 0x8, 0x5C);
- aic3x_write(codec, 0x8, 0x5D);
- aic3x_write(codec, 0x8, 0x5C);
- aic3x_write(codec, AIC3X_PAGE_SELECT, 0x00);
- aic3x_write(codec, CLASSD_CTRL, 0);
+ snd_soc_write(codec, AIC3X_PAGE_SELECT, 0x0D);
+ snd_soc_write(codec, 0xD, 0x0D);
+ snd_soc_write(codec, 0x8, 0x5C);
+ snd_soc_write(codec, 0x8, 0x5D);
+ snd_soc_write(codec, 0x8, 0x5C);
+ snd_soc_write(codec, AIC3X_PAGE_SELECT, 0x00);
+ snd_soc_write(codec, CLASSD_CTRL, 0);
}
/* off, with power on */
@@ -1305,10 +1307,10 @@ static int aic3x_probe(struct snd_soc_codec *codec)
if (aic3x->setup) {
/* setup GPIO functions */
- aic3x_write(codec, AIC3X_GPIO1_REG,
- (aic3x->setup->gpio_func[0] & 0xf) << 4);
- aic3x_write(codec, AIC3X_GPIO2_REG,
- (aic3x->setup->gpio_func[1] & 0xf) << 4);
+ snd_soc_write(codec, AIC3X_GPIO1_REG,
+ (aic3x->setup->gpio_func[0] & 0xf) << 4);
+ snd_soc_write(codec, AIC3X_GPIO2_REG,
+ (aic3x->setup->gpio_func[1] & 0xf) << 4);
}
snd_soc_add_controls(codec, aic3x_snd_controls,
--
1.7.1
next reply other threads:[~2010-09-14 11:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-14 11:54 Jarkko Nikula [this message]
2010-09-14 11:54 ` [PATCH 2/3] ASoC: tlv320aic3x: Switch to soc-cache helpers Jarkko Nikula
2010-09-14 11:59 ` Mark Brown
2010-09-14 11:54 ` [PATCH 3/3] ASoC: tlv320aic3x: Complete the soc-cache conversion Jarkko Nikula
2010-09-14 12:04 ` Mark Brown
2010-09-14 12:14 ` Jarkko Nikula
2010-09-14 12:21 ` Mark Brown
2010-09-14 12:45 ` Jarkko Nikula
2010-09-14 12:55 ` Mark Brown
2010-09-14 13:59 ` [PATCHv2 " Jarkko Nikula
2010-09-14 15:08 ` Mark Brown
2010-09-15 12:57 ` Liam Girdwood
2010-09-14 11:59 ` [PATCH 1/3] ASoC: tlv320aic3x: Use snd_soc_read and snd_soc_write Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284465289-4865-1-git-send-email-jhnikula@gmail.com \
--to=jhnikula@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.