From: Jiri Olsa <jolsa@redhat.com>
To: mingo@elte.hu, rostedt@goodmis.org, andi@firstfloor.org,
lwoodman@redhat.com, hch@infradead.org
Cc: linux-kernel@vger.kernel.org, Jiri Olsa <jolsa@redhat.com>
Subject: [PATCHv2 2/2] tracing,mm - add kernel pagefault tracepoint for x86 & x86_64
Date: Thu, 11 Nov 2010 10:09:09 +0100 [thread overview]
Message-ID: <1289466549-7602-3-git-send-email-jolsa@redhat.com> (raw)
In-Reply-To: <20101110164413.GA5360@nowhere>
This provides a tracepoint to trace kernel pagefault event.
When analyzing a vmcore resulting from a kernel failure, we
often hypothesize that "there should have a pagefault event
just before this instruction" or similar. Sometimes it means
that there should have a small delay between instructions that
extends a critical session and exposed a missing lock. Since
there have been no evidence of kernel pagefault, it is quite
difficult to adopt the hypothesis.
If we can trace the kernel pagefault event, it will help narrow
the possible cause of failure and will accelerate the
investigation a lot.
Signed-off-by: Larry Woodman <lwoodman@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
---
arch/x86/mm/fault.c | 33 ++++++++++++++++++++++-----------
include/trace/events/kmem.h | 23 +++++++++++++++++++++++
2 files changed, 45 insertions(+), 11 deletions(-)
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 7d90ceb..171dcc9 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -12,6 +12,7 @@
#include <linux/mmiotrace.h> /* kmmio_handler, ... */
#include <linux/perf_event.h> /* perf_sw_event */
#include <linux/hugetlb.h> /* hstate_index_to_shift */
+#include <trace/events/kmem.h>
#include <asm/traps.h> /* dotraplinkage, ... */
#include <asm/pgalloc.h> /* pgd_*(), ... */
@@ -944,17 +945,11 @@ static int fault_in_kernel_space(unsigned long address)
return address >= TASK_SIZE_MAX;
}
-/*
- * This routine handles page faults. It determines the address,
- * and the problem, and then passes it off to one of the appropriate
- * routines.
- */
-dotraplinkage void __kprobes
-do_page_fault(struct pt_regs *regs, unsigned long error_code)
+static inline void __do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
{
struct vm_area_struct *vma;
struct task_struct *tsk;
- unsigned long address;
struct mm_struct *mm;
int fault;
int write = error_code & PF_WRITE;
@@ -964,9 +959,6 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code)
tsk = current;
mm = tsk->mm;
- /* Get the faulting address: */
- address = read_cr2();
-
/*
* Detect and handle instructions that would cause a page fault for
* both a tracked kernel page and a userspace page.
@@ -1158,3 +1150,22 @@ good_area:
up_read(&mm->mmap_sem);
}
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ */
+dotraplinkage void __kprobes
+do_page_fault(struct pt_regs *regs, unsigned long error_code)
+{
+ unsigned long address;
+
+ /* Get the faulting address: */
+ address = read_cr2();
+
+ __do_page_fault(regs, address, error_code);
+
+ if (!user_mode(regs))
+ trace_mm_kernel_pagefault(current, address, error_code);
+}
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
index a9c87ad..b17cdf3 100644
--- a/include/trace/events/kmem.h
+++ b/include/trace/events/kmem.h
@@ -302,6 +302,29 @@ TRACE_EVENT(mm_page_alloc_extfrag,
__entry->alloc_migratetype == __entry->fallback_migratetype)
);
+TRACE_EVENT(mm_kernel_pagefault,
+
+ TP_PROTO(struct task_struct *task, unsigned long address,
+ int error_code),
+
+ TP_ARGS(task, address, error_code),
+
+ TP_STRUCT__entry(
+ __field(struct task_struct *, task)
+ __field(unsigned long, address)
+ __field(unsigned long, error_code)
+ ),
+
+ TP_fast_assign(
+ __entry->task = task;
+ __entry->address = address;
+ __entry->error_code = error_code;
+ ),
+
+ TP_printk("task=%lx, address=%lx, error code=%lx",
+ (unsigned long)__entry->task, (unsigned long)__entry->address,
+ __entry->error_code)
+ );
#endif /* _TRACE_KMEM_H */
/* This part must be outside protection */
--
1.7.1
next prev parent reply other threads:[~2010-11-11 9:09 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-10 11:56 [PATCH 0/2] tracing,mm - add kernel pagefault tracepoint for x86 & x86_64 Jiri Olsa
2010-11-10 11:56 ` [PATCH 1/2] " Jiri Olsa
2010-11-10 13:29 ` Christoph Hellwig
2010-11-10 13:44 ` Jiri Olsa
2010-11-10 13:52 ` Ingo Molnar
2010-11-10 15:00 ` Frederic Weisbecker
2010-11-10 15:17 ` Jiri Olsa
2010-11-10 15:20 ` Christoph Hellwig
2010-11-10 16:28 ` Andi Kleen
2010-11-10 16:44 ` Frederic Weisbecker
2010-11-11 9:09 ` [PATCHv2 0/2] " Jiri Olsa
2010-11-11 9:09 ` [PATCHv2 1/2] tracing - fix recursive user stack trace Jiri Olsa
2010-11-11 10:34 ` Andi Kleen
2010-11-11 9:09 ` Jiri Olsa [this message]
2010-11-11 12:51 ` [PATCHv2 2/2] tracing,mm - add kernel pagefault tracepoint for x86 & x86_64 Christoph Hellwig
2010-11-11 13:15 ` Jiri Olsa
2010-11-15 13:43 ` Frederic Weisbecker
2010-11-15 14:06 ` Andi Kleen
2010-11-15 14:54 ` Frederic Weisbecker
2010-11-15 15:04 ` Steven Rostedt
2010-11-15 14:19 ` Steven Rostedt
2010-11-16 9:23 ` Jiri Olsa
2010-11-16 13:13 ` Steven Rostedt
2010-11-10 11:56 ` [PATCH 2/2] tracing - fix recursive user stack trace Jiri Olsa
2010-11-11 0:13 ` Li Zefan
2010-11-11 21:57 ` Steven Rostedt
2010-11-18 14:05 ` [tip:perf/core] tracing: Fix " tip-bot for Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289466549-7602-3-git-send-email-jolsa@redhat.com \
--to=jolsa@redhat.com \
--cc=andi@firstfloor.org \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lwoodman@redhat.com \
--cc=mingo@elte.hu \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.