* [Repost][PATCH v3 0/2] OMAP3: Display Support @ 2010-11-16 3:53 ` Samreen 0 siblings, 0 replies; 6+ messages in thread From: Samreen @ 2010-11-16 3:53 UTC (permalink / raw) To: Tomi Valkeinen, Tony Lindgren, Russell King, linux-omap, linux-arm-kernel Cc: Mukund Mittal, Santosh Shilimkar, Vikram Pandita, Samreen This patch series adds the Display Support for OMAP3 platforms and the corresponding changes in the board files. Version3: - Rebase to the latest LO Version2: - Optimised to configure INTBR from gpio to PWM1 mode setting and enabling of the PWM1 mode only when its not in PWM1 mode. Kishore Y (2): OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 OMAP3: Enable display on ZOOM2/3/3630SDP arch/arm/mach-omap2/Makefile | 3 + arch/arm/mach-omap2/board-3630sdp.c | 1 + arch/arm/mach-omap2/board-zoom-display.c | 168 +++++++++++++++++++++++++ arch/arm/mach-omap2/board-zoom-peripherals.c | 49 +++++++- arch/arm/mach-omap2/board-zoom2.c | 1 + arch/arm/mach-omap2/board-zoom3.c | 1 + arch/arm/mach-omap2/include/mach/board-zoom.h | 3 + 7 files changed, 224 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/board-zoom-display.c ^ permalink raw reply [flat|nested] 6+ messages in thread
* [Repost][PATCH v3 0/2] OMAP3: Display Support @ 2010-11-16 3:53 ` Samreen 0 siblings, 0 replies; 6+ messages in thread From: Samreen @ 2010-11-16 3:53 UTC (permalink / raw) To: linux-arm-kernel This patch series adds the Display Support for OMAP3 platforms and the corresponding changes in the board files. Version3: - Rebase to the latest LO Version2: - Optimised to configure INTBR from gpio to PWM1 mode setting and enabling of the PWM1 mode only when its not in PWM1 mode. Kishore Y (2): OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 OMAP3: Enable display on ZOOM2/3/3630SDP arch/arm/mach-omap2/Makefile | 3 + arch/arm/mach-omap2/board-3630sdp.c | 1 + arch/arm/mach-omap2/board-zoom-display.c | 168 +++++++++++++++++++++++++ arch/arm/mach-omap2/board-zoom-peripherals.c | 49 +++++++- arch/arm/mach-omap2/board-zoom2.c | 1 + arch/arm/mach-omap2/board-zoom3.c | 1 + arch/arm/mach-omap2/include/mach/board-zoom.h | 3 + 7 files changed, 224 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/board-zoom-display.c ^ permalink raw reply [flat|nested] 6+ messages in thread
* [Repost][PATCH v3 1/2] OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 2010-11-16 3:53 ` Samreen @ 2010-11-16 3:53 ` Samreen -1 siblings, 0 replies; 6+ messages in thread From: Samreen @ 2010-11-16 3:53 UTC (permalink / raw) To: Tomi Valkeinen, Tony Lindgren, Russell King, linux-omap, linux-arm-kernel Cc: Mukund Mittal, Santosh Shilimkar, Vikram Pandita, Kishore Y, Rajkumar N, Samreen From: Kishore Y <kishore.y@ti.com> Board-zoom-display.c added as a common file for display functionality on boards zoom2, zoom3 and 3630sdp. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> --- arch/arm/mach-omap2/Makefile | 3 + arch/arm/mach-omap2/board-zoom-display.c | 168 +++++++++++++++++++++++++ arch/arm/mach-omap2/board-zoom-peripherals.c | 49 +++++++- arch/arm/mach-omap2/include/mach/board-zoom.h | 3 + 4 files changed, 221 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/board-zoom-display.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 60e51bc..7b20341 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -146,16 +146,19 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ board-zoom-peripherals.o \ + board-zoom-display.o \ board-flash.o \ hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \ board-zoom-peripherals.o \ + board-zoom-display.o \ board-flash.o \ hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ board-zoom-peripherals.o \ + board-zoom-display.o \ board-flash.o \ hsmmc.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c new file mode 100644 index 0000000..6bcd436 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc. + * + * Modified from mach-omap2/board-zoom-peripherals.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/i2c/twl.h> +#include <linux/spi/spi.h> +#include <plat/mcspi.h> +#include <plat/display.h> + +#define LCD_PANEL_RESET_GPIO_PROD 96 +#define LCD_PANEL_RESET_GPIO_PILOT 55 +#define LCD_PANEL_QVGA_GPIO 56 + +static void zoom_lcd_panel_init(void) +{ + int ret; + unsigned char lcd_panel_reset_gpio; + + lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + LCD_PANEL_RESET_GPIO_PROD : + LCD_PANEL_RESET_GPIO_PILOT; + + ret = gpio_request(lcd_panel_reset_gpio, "lcd reset"); + if (ret) { + pr_err("Failed to get LCD reset GPIO (gpio%d).\n", + lcd_panel_reset_gpio); + return; + } + gpio_direction_output(lcd_panel_reset_gpio, 1); + + ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); + if (ret) { + pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n", + LCD_PANEL_QVGA_GPIO); + goto err0; + } + gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1); + + return; +err0: + gpio_free(lcd_panel_reset_gpio); +} + +static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + return 0; +} + +static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) +{ +} + +/* + * PWMA/B register offsets (TWL4030_MODULE_PWMA) + */ +#define TWL_INTBR_PMBR1 0xD +#define TWL_INTBR_GPBR1 0xC +#define TWL_LED_PWMON 0x0 +#define TWL_LED_PWMOFF 0x1 + +static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) +{ + unsigned char c; + u8 mux_pwm, enb_pwm; + + if (level > 100) + return -1; + + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1); + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1); + + if (level == 0) { + /* disable pwm1 output and clock */ + enb_pwm = enb_pwm & 0xF5; + /* change pwm1 pin to gpio pin */ + mux_pwm = mux_pwm & 0xCF; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + enb_pwm, TWL_INTBR_GPBR1); + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + mux_pwm, TWL_INTBR_PMBR1); + return 0; + } + + if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) { + /* change gpio pin to pwm1 pin */ + mux_pwm = mux_pwm | 0x30; + /* enable pwm1 output and clock*/ + enb_pwm = enb_pwm | 0x0A; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + mux_pwm, TWL_INTBR_PMBR1); + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + enb_pwm, TWL_INTBR_GPBR1); + } + + c = ((50 * (100 - level)) / 100) + 1; + twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF); + twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON); + + return 0; +} + +static struct omap_dss_device zoom_lcd_device = { + .name = "lcd", + .driver_name = "NEC_8048_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .platform_enable = zoom_panel_enable_lcd, + .platform_disable = zoom_panel_disable_lcd, + .max_backlight_level = 100, + .set_backlight = zoom_set_bl_intensity, +}; + +static struct omap_dss_device *zoom_dss_devices[] = { + &zoom_lcd_device, +}; + +static struct omap_dss_board_info zoom_dss_data = { + .num_devices = ARRAY_SIZE(zoom_dss_devices), + .devices = zoom_dss_devices, + .default_device = &zoom_lcd_device, +}; + +static struct platform_device zoom_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &zoom_dss_data, + }, +}; + +static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { + .turbo_mode = 1, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info nec_8048_spi_board_info[] __initdata = { + [0] = { + .modalias = "nec_8048_spi", + .bus_num = 1, + .chip_select = 2, + .max_speed_hz = 375000, + .controller_data = &dss_lcd_mcspi_config, + }, +}; + +static struct platform_device *zoom_display_devices[] __initdata = { + &zoom_dss_device, +}; + +void __init zoom_display_init(void) +{ + platform_add_devices(zoom_display_devices, + ARRAY_SIZE(zoom_display_devices)); + spi_register_board_info(nec_8048_spi_board_info, + ARRAY_SIZE(nec_8048_spi_board_info)); + zoom_lcd_panel_init(); +} + diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 86c9b21..d140d74 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -35,6 +35,8 @@ #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) +#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) + /* Zoom2 has Qwerty keyboard*/ static uint32_t board_keymap[] = { KEY(0, 0, KEY_E), @@ -224,9 +226,43 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; +static struct regulator_consumer_supply zoom_vpll2_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); + +static struct regulator_consumer_supply zoom_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); + +static struct regulator_init_data zoom_vpll2 = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vpll2_supply, +}; + +static struct regulator_init_data zoom_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vdda_dac_supply, +}; + static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); @@ -238,7 +274,15 @@ static int zoom_twl_gpio_setup(struct device *dev, zoom_vsim_supply.dev = mmc[0].dev; zoom_vmmc2_supply.dev = mmc[1].dev; - return 0; + ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable"); + if (ret) { + pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", + LCD_PANEL_ENABLE_GPIO); + return ret; + } + gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); + + return ret; } /* EXTMUTE callback function */ @@ -301,7 +345,8 @@ static struct twl4030_platform_data zoom_twldata = { .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, - + .vpll2 = &zoom_vpll2, + .vdac = &zoom_vdac, }; static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h index f93ca39..d20bd9c 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -1,9 +1,12 @@ /* * Defines for zoom boards */ +#include <plat/display.h> + #define ZOOM_NAND_CS 0 extern int __init zoom_debugboard_init(void); extern void __init zoom_peripherals_init(void); +extern void __init zoom_display_init(void); #define ZOOM2_HEADSET_EXTMUTE_GPIO 153 -- 1.5.6.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Repost][PATCH v3 1/2] OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 @ 2010-11-16 3:53 ` Samreen 0 siblings, 0 replies; 6+ messages in thread From: Samreen @ 2010-11-16 3:53 UTC (permalink / raw) To: linux-arm-kernel From: Kishore Y <kishore.y@ti.com> Board-zoom-display.c added as a common file for display functionality on boards zoom2, zoom3 and 3630sdp. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> --- arch/arm/mach-omap2/Makefile | 3 + arch/arm/mach-omap2/board-zoom-display.c | 168 +++++++++++++++++++++++++ arch/arm/mach-omap2/board-zoom-peripherals.c | 49 +++++++- arch/arm/mach-omap2/include/mach/board-zoom.h | 3 + 4 files changed, 221 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/board-zoom-display.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 60e51bc..7b20341 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -146,16 +146,19 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ board-zoom-peripherals.o \ + board-zoom-display.o \ board-flash.o \ hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \ board-zoom-peripherals.o \ + board-zoom-display.o \ board-flash.o \ hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ board-zoom-peripherals.o \ + board-zoom-display.o \ board-flash.o \ hsmmc.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c new file mode 100644 index 0000000..6bcd436 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc. + * + * Modified from mach-omap2/board-zoom-peripherals.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/i2c/twl.h> +#include <linux/spi/spi.h> +#include <plat/mcspi.h> +#include <plat/display.h> + +#define LCD_PANEL_RESET_GPIO_PROD 96 +#define LCD_PANEL_RESET_GPIO_PILOT 55 +#define LCD_PANEL_QVGA_GPIO 56 + +static void zoom_lcd_panel_init(void) +{ + int ret; + unsigned char lcd_panel_reset_gpio; + + lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + LCD_PANEL_RESET_GPIO_PROD : + LCD_PANEL_RESET_GPIO_PILOT; + + ret = gpio_request(lcd_panel_reset_gpio, "lcd reset"); + if (ret) { + pr_err("Failed to get LCD reset GPIO (gpio%d).\n", + lcd_panel_reset_gpio); + return; + } + gpio_direction_output(lcd_panel_reset_gpio, 1); + + ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); + if (ret) { + pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n", + LCD_PANEL_QVGA_GPIO); + goto err0; + } + gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1); + + return; +err0: + gpio_free(lcd_panel_reset_gpio); +} + +static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + return 0; +} + +static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) +{ +} + +/* + * PWMA/B register offsets (TWL4030_MODULE_PWMA) + */ +#define TWL_INTBR_PMBR1 0xD +#define TWL_INTBR_GPBR1 0xC +#define TWL_LED_PWMON 0x0 +#define TWL_LED_PWMOFF 0x1 + +static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) +{ + unsigned char c; + u8 mux_pwm, enb_pwm; + + if (level > 100) + return -1; + + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1); + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1); + + if (level == 0) { + /* disable pwm1 output and clock */ + enb_pwm = enb_pwm & 0xF5; + /* change pwm1 pin to gpio pin */ + mux_pwm = mux_pwm & 0xCF; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + enb_pwm, TWL_INTBR_GPBR1); + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + mux_pwm, TWL_INTBR_PMBR1); + return 0; + } + + if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) { + /* change gpio pin to pwm1 pin */ + mux_pwm = mux_pwm | 0x30; + /* enable pwm1 output and clock*/ + enb_pwm = enb_pwm | 0x0A; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + mux_pwm, TWL_INTBR_PMBR1); + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + enb_pwm, TWL_INTBR_GPBR1); + } + + c = ((50 * (100 - level)) / 100) + 1; + twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF); + twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON); + + return 0; +} + +static struct omap_dss_device zoom_lcd_device = { + .name = "lcd", + .driver_name = "NEC_8048_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .platform_enable = zoom_panel_enable_lcd, + .platform_disable = zoom_panel_disable_lcd, + .max_backlight_level = 100, + .set_backlight = zoom_set_bl_intensity, +}; + +static struct omap_dss_device *zoom_dss_devices[] = { + &zoom_lcd_device, +}; + +static struct omap_dss_board_info zoom_dss_data = { + .num_devices = ARRAY_SIZE(zoom_dss_devices), + .devices = zoom_dss_devices, + .default_device = &zoom_lcd_device, +}; + +static struct platform_device zoom_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &zoom_dss_data, + }, +}; + +static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { + .turbo_mode = 1, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info nec_8048_spi_board_info[] __initdata = { + [0] = { + .modalias = "nec_8048_spi", + .bus_num = 1, + .chip_select = 2, + .max_speed_hz = 375000, + .controller_data = &dss_lcd_mcspi_config, + }, +}; + +static struct platform_device *zoom_display_devices[] __initdata = { + &zoom_dss_device, +}; + +void __init zoom_display_init(void) +{ + platform_add_devices(zoom_display_devices, + ARRAY_SIZE(zoom_display_devices)); + spi_register_board_info(nec_8048_spi_board_info, + ARRAY_SIZE(nec_8048_spi_board_info)); + zoom_lcd_panel_init(); +} + diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 86c9b21..d140d74 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -35,6 +35,8 @@ #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) +#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) + /* Zoom2 has Qwerty keyboard*/ static uint32_t board_keymap[] = { KEY(0, 0, KEY_E), @@ -224,9 +226,43 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; +static struct regulator_consumer_supply zoom_vpll2_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); + +static struct regulator_consumer_supply zoom_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); + +static struct regulator_init_data zoom_vpll2 = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vpll2_supply, +}; + +static struct regulator_init_data zoom_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vdda_dac_supply, +}; + static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); @@ -238,7 +274,15 @@ static int zoom_twl_gpio_setup(struct device *dev, zoom_vsim_supply.dev = mmc[0].dev; zoom_vmmc2_supply.dev = mmc[1].dev; - return 0; + ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable"); + if (ret) { + pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", + LCD_PANEL_ENABLE_GPIO); + return ret; + } + gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); + + return ret; } /* EXTMUTE callback function */ @@ -301,7 +345,8 @@ static struct twl4030_platform_data zoom_twldata = { .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, - + .vpll2 = &zoom_vpll2, + .vdac = &zoom_vdac, }; static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h index f93ca39..d20bd9c 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -1,9 +1,12 @@ /* * Defines for zoom boards */ +#include <plat/display.h> + #define ZOOM_NAND_CS 0 extern int __init zoom_debugboard_init(void); extern void __init zoom_peripherals_init(void); +extern void __init zoom_display_init(void); #define ZOOM2_HEADSET_EXTMUTE_GPIO 153 -- 1.5.6.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Repost][PATCH v3 2/2] OMAP3: Enable display on ZOOM2/3/3630SDP 2010-11-16 3:53 ` Samreen @ 2010-11-16 3:53 ` Samreen -1 siblings, 0 replies; 6+ messages in thread From: Samreen @ 2010-11-16 3:53 UTC (permalink / raw) To: Tomi Valkeinen, Tony Lindgren, Russell King, linux-omap, linux-arm-kernel Cc: Mukund Mittal, Santosh Shilimkar, Vikram Pandita, Kishore Y, Samreen From: Kishore Y <kishore.y@ti.com> Enable Display on zoom2, zoom3 and 3630sdp boards. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Samreen <samreen@ti.com> --- arch/arm/mach-omap2/board-3630sdp.c | 1 + arch/arm/mach-omap2/board-zoom2.c | 1 + arch/arm/mach-omap2/board-zoom3.c | 1 + 3 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index bbcf580..bf990b6 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -209,6 +209,7 @@ static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); + zoom_display_init(); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 2992a9f..1cd6414 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -105,6 +105,7 @@ static void __init omap_zoom2_init(void) board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init(); + zoom_display_init(); } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 5adde12..1523369 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -118,6 +118,7 @@ static void __init omap_zoom_init(void) board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init(); + zoom_display_init(); omap_mux_init_gpio(64, OMAP_PIN_OUTPUT); usb_ehci_init(&ehci_pdata); -- 1.5.6.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Repost][PATCH v3 2/2] OMAP3: Enable display on ZOOM2/3/3630SDP @ 2010-11-16 3:53 ` Samreen 0 siblings, 0 replies; 6+ messages in thread From: Samreen @ 2010-11-16 3:53 UTC (permalink / raw) To: linux-arm-kernel From: Kishore Y <kishore.y@ti.com> Enable Display on zoom2, zoom3 and 3630sdp boards. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Samreen <samreen@ti.com> --- arch/arm/mach-omap2/board-3630sdp.c | 1 + arch/arm/mach-omap2/board-zoom2.c | 1 + arch/arm/mach-omap2/board-zoom3.c | 1 + 3 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index bbcf580..bf990b6 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -209,6 +209,7 @@ static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); + zoom_display_init(); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 2992a9f..1cd6414 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -105,6 +105,7 @@ static void __init omap_zoom2_init(void) board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init(); + zoom_display_init(); } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 5adde12..1523369 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -118,6 +118,7 @@ static void __init omap_zoom_init(void) board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init(); + zoom_display_init(); omap_mux_init_gpio(64, OMAP_PIN_OUTPUT); usb_ehci_init(&ehci_pdata); -- 1.5.6.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-11-16 3:59 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-11-16 3:53 [Repost][PATCH v3 0/2] OMAP3: Display Support Samreen 2010-11-16 3:53 ` Samreen 2010-11-16 3:53 ` [Repost][PATCH v3 1/2] OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 Samreen 2010-11-16 3:53 ` Samreen 2010-11-16 3:53 ` [Repost][PATCH v3 2/2] OMAP3: Enable display on ZOOM2/3/3630SDP Samreen 2010-11-16 3:53 ` Samreen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.