From: mkl0301@gmail.com (mkl0301 at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: cns3xxx: Add new and export the old power management functions
Date: Tue, 23 Nov 2010 00:32:43 +0800 [thread overview]
Message-ID: <1290443565-20766-2-git-send-email-mkl0301@gmail.com> (raw)
In-Reply-To: <1290443565-20766-1-git-send-email-mkl0301@gmail.com>
From: Mac Lin <mkl0301@gmail.com>
This patch add cns3xxx_pwr_clk_dis, and export thoes power management functions
that may be used by many other device drivers on CNS3XXX.
Signed-off-by: Mac Lin <mkl0301@gmail.com>
---
arch/arm/mach-cns3xxx/core.h | 4 ++--
arch/arm/mach-cns3xxx/include/mach/pm.h | 19 +++++++++++++++++++
arch/arm/mach-cns3xxx/pm.c | 17 +++++++++++++++++
3 files changed, 38 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-cns3xxx/include/mach/pm.h
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 6b33ec1..c6636bd 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -11,13 +11,13 @@
#ifndef __CNS3XXX_CORE_H
#define __CNS3XXX_CORE_H
+#include <mach/pm.h>
+
extern void __iomem *gic_cpu_base_addr;
extern struct sys_timer cns3xxx_timer;
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h
new file mode 100644
index 0000000..102617b
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/pm.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2004 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_PM_H
+#define __CNS3XXX_PM_H
+
+void cns3xxx_pwr_clk_en(unsigned int block);
+void cns3xxx_pwr_clk_dis(unsigned int block);
+void cns3xxx_pwr_power_up(unsigned int block);
+void cns3xxx_pwr_power_down(unsigned int block);
+
+#endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 38e4470..a4495e6 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,6 +6,8 @@
* published by the Free Software Foundation.
*/
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <mach/system.h>
@@ -18,6 +20,16 @@ void cns3xxx_pwr_clk_en(unsigned int block)
reg |= (block & PM_CLK_GATE_REG_MASK);
__raw_writel(reg, PM_CLK_GATE_REG);
}
+EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
+
+void cns3xxx_pwr_clk_dis(unsigned int block)
+{
+ u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+ reg &= ~(block & PM_CLK_GATE_REG_MASK);
+ __raw_writel(reg, PM_CLK_GATE_REG);
+}
+EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
void cns3xxx_pwr_power_up(unsigned int block)
{
@@ -29,6 +41,7 @@ void cns3xxx_pwr_power_up(unsigned int block)
/* Wait for 300us for the PLL output clock locked. */
udelay(300);
};
+EXPORT_SYMBOL(cns3xxx_pwr_power_up);
void cns3xxx_pwr_power_down(unsigned int block)
{
@@ -38,6 +51,7 @@ void cns3xxx_pwr_power_down(unsigned int block)
reg |= (block & CNS3XXX_PWR_PLL_ALL);
__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
};
+EXPORT_SYMBOL(cns3xxx_pwr_power_down);
static void cns3xxx_pwr_soft_rst_force(unsigned int block)
{
@@ -56,6 +70,7 @@ static void cns3xxx_pwr_soft_rst_force(unsigned int block)
__raw_writel(reg, PM_SOFT_RST_REG);
}
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force);
void cns3xxx_pwr_soft_rst(unsigned int block)
{
@@ -69,6 +84,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block)
}
cns3xxx_pwr_soft_rst_force(block);
}
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
void arch_reset(char mode, const char *cmd)
{
@@ -99,3 +115,4 @@ int cns3xxx_cpu_clock(void)
return cpu;
}
+EXPORT_SYMBOL(cns3xxx_cpu_clock);
--
1.7.3
WARNING: multiple messages have this Message-ID (diff)
From: mkl0301@gmail.com
To: cbouatmailru@gmail.com, avorontsov@mvista.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
dbrownell@users.sourceforge.net, linux-usb@vger.kernel.org
Cc: Mac Lin <mkl0301@gmail.com>
Subject: [PATCH v2 1/3] ARM: cns3xxx: Add new and export the old power management functions
Date: Tue, 23 Nov 2010 00:32:43 +0800 [thread overview]
Message-ID: <1290443565-20766-2-git-send-email-mkl0301@gmail.com> (raw)
In-Reply-To: <1290443565-20766-1-git-send-email-mkl0301@gmail.com>
From: Mac Lin <mkl0301@gmail.com>
This patch add cns3xxx_pwr_clk_dis, and export thoes power management functions
that may be used by many other device drivers on CNS3XXX.
Signed-off-by: Mac Lin <mkl0301@gmail.com>
---
arch/arm/mach-cns3xxx/core.h | 4 ++--
arch/arm/mach-cns3xxx/include/mach/pm.h | 19 +++++++++++++++++++
arch/arm/mach-cns3xxx/pm.c | 17 +++++++++++++++++
3 files changed, 38 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-cns3xxx/include/mach/pm.h
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 6b33ec1..c6636bd 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -11,13 +11,13 @@
#ifndef __CNS3XXX_CORE_H
#define __CNS3XXX_CORE_H
+#include <mach/pm.h>
+
extern void __iomem *gic_cpu_base_addr;
extern struct sys_timer cns3xxx_timer;
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h
new file mode 100644
index 0000000..102617b
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/pm.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2004 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_PM_H
+#define __CNS3XXX_PM_H
+
+void cns3xxx_pwr_clk_en(unsigned int block);
+void cns3xxx_pwr_clk_dis(unsigned int block);
+void cns3xxx_pwr_power_up(unsigned int block);
+void cns3xxx_pwr_power_down(unsigned int block);
+
+#endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 38e4470..a4495e6 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,6 +6,8 @@
* published by the Free Software Foundation.
*/
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <mach/system.h>
@@ -18,6 +20,16 @@ void cns3xxx_pwr_clk_en(unsigned int block)
reg |= (block & PM_CLK_GATE_REG_MASK);
__raw_writel(reg, PM_CLK_GATE_REG);
}
+EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
+
+void cns3xxx_pwr_clk_dis(unsigned int block)
+{
+ u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+ reg &= ~(block & PM_CLK_GATE_REG_MASK);
+ __raw_writel(reg, PM_CLK_GATE_REG);
+}
+EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
void cns3xxx_pwr_power_up(unsigned int block)
{
@@ -29,6 +41,7 @@ void cns3xxx_pwr_power_up(unsigned int block)
/* Wait for 300us for the PLL output clock locked. */
udelay(300);
};
+EXPORT_SYMBOL(cns3xxx_pwr_power_up);
void cns3xxx_pwr_power_down(unsigned int block)
{
@@ -38,6 +51,7 @@ void cns3xxx_pwr_power_down(unsigned int block)
reg |= (block & CNS3XXX_PWR_PLL_ALL);
__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
};
+EXPORT_SYMBOL(cns3xxx_pwr_power_down);
static void cns3xxx_pwr_soft_rst_force(unsigned int block)
{
@@ -56,6 +70,7 @@ static void cns3xxx_pwr_soft_rst_force(unsigned int block)
__raw_writel(reg, PM_SOFT_RST_REG);
}
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force);
void cns3xxx_pwr_soft_rst(unsigned int block)
{
@@ -69,6 +84,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block)
}
cns3xxx_pwr_soft_rst_force(block);
}
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
void arch_reset(char mode, const char *cmd)
{
@@ -99,3 +115,4 @@ int cns3xxx_cpu_clock(void)
return cpu;
}
+EXPORT_SYMBOL(cns3xxx_cpu_clock);
--
1.7.3
next prev parent reply other threads:[~2010-11-22 16:32 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-22 16:32 [PATCH v2 0/3] USB: add support for cns3xxx SOC's EHCI/OHCI controller mkl0301 at gmail.com
2010-11-22 16:32 ` mkl0301
2010-11-22 16:32 ` mkl0301 at gmail.com [this message]
2010-11-22 16:32 ` [PATCH v2 1/3] ARM: cns3xxx: Add new and export the old power management functions mkl0301
2010-11-24 16:11 ` Anton Vorontsov
2010-11-24 16:11 ` Anton Vorontsov
2010-11-22 16:32 ` [PATCH v2 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller mkl0301 at gmail.com
2010-11-22 16:32 ` mkl0301
2010-11-24 16:11 ` Anton Vorontsov
2010-11-24 16:11 ` Anton Vorontsov
2010-11-25 7:25 ` Lin Mac
2010-11-25 7:25 ` Lin Mac
2010-11-25 10:48 ` Anton Vorontsov
2010-11-25 10:48 ` Anton Vorontsov
2010-11-25 13:51 ` Lin Mac
2010-11-25 13:51 ` Lin Mac
2010-11-25 13:56 ` Anton Vorontsov
2010-11-25 13:56 ` Anton Vorontsov
2010-11-25 15:37 ` Alan Stern
2010-11-25 15:37 ` Alan Stern
2010-11-25 16:15 ` Anton Vorontsov
2010-11-25 16:15 ` Anton Vorontsov
2010-11-22 16:32 ` [PATCH v2 3/3] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs mkl0301 at gmail.com
2010-11-22 16:32 ` mkl0301
2010-11-24 16:25 ` Anton Vorontsov
2010-11-24 16:25 ` Anton Vorontsov
2010-11-25 13:12 ` Anton Vorontsov
2010-11-25 13:12 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290443565-20766-2-git-send-email-mkl0301@gmail.com \
--to=mkl0301@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.