All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: linux-kernel@vger.kernel.org, mingo@redhat.com,
	tglx@linutronix.de, hpa@zytor.com, x86@kernel.org,
	eric.dumazet@gmail.com, yinghai@kernel.org, brgerst@gmail.com,
	gorcunov@gmail.com, penberg@kernel.org
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit
Date: Sat, 27 Nov 2010 16:22:02 +0100	[thread overview]
Message-ID: <1290871325-3055-14-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1290871325-3055-1-git-send-email-tj@kernel.org>

The mapping between cpu/apicid and node is done via apicid_to_node[]
on 64bit and apicid_2_node[] + apic->numa_cpu_node() on 32bit.  This
difference makes it difficult to further unify 32 and 64bit NUMA
hanlding.

This patch unifies it by replacing both apicid_to_node[] and
apicid_2_node[] with __apicid_to_node[] array, which is accessed by
two accessors - set_apicid_to_node() and numa_cpu_node().  On 64bit,
numa_cpu_node() always consults __apicid_to_node[] directly while
32bit goes through apic->numa_cpu_node() method to allow apic
implementation to override it.

There are several places where using numa_cpu_node() is awkward and
the override doesn't matter.  In those places, __apicid_to_node[] are
used directly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
---
 arch/x86/include/asm/mpspec.h  |    1 -
 arch/x86/include/asm/numa.h    |   31 +++++++++++++++++++++++++++++++
 arch/x86/include/asm/numa_32.h |    6 ++++++
 arch/x86/include/asm/numa_64.h |    5 ++---
 arch/x86/kernel/acpi/boot.c    |    3 +--
 arch/x86/kernel/apic/apic.c    |    6 +++++-
 arch/x86/kernel/cpu/amd.c      |   14 +++++++-------
 arch/x86/kernel/cpu/intel.c    |    3 +--
 arch/x86/kernel/smpboot.c      |    6 +-----
 arch/x86/mm/k8topology_64.c    |    2 +-
 arch/x86/mm/numa.c             |    6 +++++-
 arch/x86/mm/numa_32.c          |    6 ++++++
 arch/x86/mm/numa_64.c          |   18 +++++++++---------
 arch/x86/mm/srat_32.c          |    2 +-
 arch/x86/mm/srat_64.c          |   10 +++++-----
 15 files changed, 81 insertions(+), 38 deletions(-)

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 018ffc1..ae78732 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -24,7 +24,6 @@ extern int pic_mode;
 #define MAX_IRQ_SOURCES		256
 
 extern unsigned int def_to_bigsmp;
-extern u8 apicid_2_node[];
 
 #ifdef CONFIG_X86_NUMAQ
 extern int mp_bus_id_to_node[MAX_MP_BUSSES];
diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index 27da400..e40bf6f 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -1,5 +1,36 @@
+#ifndef _ASM_X86_NUMA_H
+#define _ASM_X86_NUMA_H
+
+#include <asm/apicdef.h>
+
+#ifdef CONFIG_NUMA
+/*
+ * __apicid_to_node[] stores the raw mapping between physical apicid
+ * and node and is used to initialize cpu_to_node mapping.
+ *
+ * The mapping may be overridden by apic->numa_cpu_node() on 32bit and
+ * thus should be accessed by the accessors - set_apicid_to_node() and
+ * numa_cpu_node().
+ *
+ * If the user knows that it doesn't care about 32bit APIC-specific
+ * overrides, __apicid_to_node[] may be used directly.
+ */
+extern s16 __apicid_to_node[MAX_LOCAL_APIC];
+
+static inline void set_apicid_to_node(int apicid, s16 node)
+{
+	__apicid_to_node[apicid] = node;
+}
+#else	/* CONFIG_NUMA */
+static inline void set_apicid_to_node(int apicid, s16 node)
+{
+}
+#endif	/* CONFIG_NUMA */
+
 #ifdef CONFIG_X86_32
 # include "numa_32.h"
 #else
 # include "numa_64.h"
 #endif
+
+#endif	/* _ASM_X86_NUMA_H */
diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h
index a372290..d30eb6c 100644
--- a/arch/x86/include/asm/numa_32.h
+++ b/arch/x86/include/asm/numa_32.h
@@ -4,6 +4,12 @@
 extern int pxm_to_nid(int pxm);
 extern void numa_remove_cpu(int cpu);
 
+#ifdef CONFIG_NUMA
+extern int __cpuinit numa_cpu_node(int apicid);
+#else	/* CONFIG_NUMA */
+static inline int numa_cpu_node(int cpu)		{ return NUMA_NO_NODE; }
+#endif	/* CONFIG_NUMA */
+
 #ifdef CONFIG_HIGHMEM
 extern void set_highmem_pages_init(void);
 #else
diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h
index 823e070..17171ee 100644
--- a/arch/x86/include/asm/numa_64.h
+++ b/arch/x86/include/asm/numa_64.h
@@ -2,7 +2,6 @@
 #define _ASM_X86_NUMA_64_H
 
 #include <linux/nodemask.h>
-#include <asm/apicdef.h>
 
 struct bootnode {
 	u64 start;
@@ -17,8 +16,6 @@ extern int compute_hash_shift(struct bootnode *nodes, int numblks,
 extern void numa_init_array(void);
 extern int numa_off;
 
-extern s16 apicid_to_node[MAX_LOCAL_APIC];
-
 extern unsigned long numa_free_all_bootmem(void);
 extern void setup_node_bootmem(int nodeid, unsigned long start,
 			       unsigned long end);
@@ -32,6 +29,7 @@ extern void setup_node_bootmem(int nodeid, unsigned long start,
 #define NODE_MIN_SIZE (4*1024*1024)
 
 extern void __init init_cpu_to_node(void);
+extern int __cpuinit numa_cpu_node(int cpu);
 extern void __cpuinit numa_set_node(int cpu, int node);
 extern void __cpuinit numa_clear_node(int cpu);
 extern void __cpuinit numa_add_cpu(int cpu);
@@ -43,6 +41,7 @@ extern void __cpuinit numa_remove_cpu(int cpu);
 #endif /* CONFIG_NUMA_EMU */
 #else
 static inline void init_cpu_to_node(void)		{ }
+static inline int numa_cpu_node(int cpu)		{ return NUMA_NO_NODE; }
 static inline void numa_set_node(int cpu, int node)	{ }
 static inline void numa_clear_node(int cpu)		{ }
 static inline void numa_add_cpu(int cpu, int node)	{ }
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 71232b9..edff4f5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -583,11 +583,10 @@ static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 	nid = acpi_get_node(handle);
 	if (nid == -1 || !node_online(nid))
 		return;
+	set_apicid_to_node(physid, nid);
 #ifdef CONFIG_X86_64
-	apicid_to_node[physid] = nid;
 	numa_set_node(cpu, nid);
 #else /* CONFIG_X86_32 */
-	apicid_2_node[physid] = nid;
 	cpu_to_node_map[cpu] = nid;
 #endif
 
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 597ef66..ee20fe7 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2016,7 +2016,11 @@ void default_init_apic_ldr(void)
 int default_numa_cpu_node(int cpu)
 {
 #ifdef CONFIG_NUMA
-	return apicid_2_node[early_per_cpu(x86_cpu_to_apicid, cpu)];
+	int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
+
+	if (apicid != BAD_APICID)
+		return __apicid_to_node[apicid];
+	return NUMA_NO_NODE;
 #else
 	return 0;
 #endif
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 9e093f8..aa3c613 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -239,12 +239,12 @@ static int __cpuinit nearby_node(int apicid)
 	int i, node;
 
 	for (i = apicid - 1; i >= 0; i--) {
-		node = apicid_to_node[i];
+		node = __apicid_to_node[i];
 		if (node != NUMA_NO_NODE && node_online(node))
 			return node;
 	}
 	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
-		node = apicid_to_node[i];
+		node = __apicid_to_node[i];
 		if (node != NUMA_NO_NODE && node_online(node))
 			return node;
 	}
@@ -339,10 +339,10 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 	int node;
 	unsigned apicid = c->apicid;
 
-	node = per_cpu(cpu_llc_id, cpu);
+	node = numa_cpu_node(cpu);
+	if (node == NUMA_NO_NODE)
+		node = per_cpu(cpu_llc_id, cpu);
 
-	if (apicid_to_node[apicid] != NUMA_NO_NODE)
-		node = apicid_to_node[apicid];
 	if (!node_online(node)) {
 		/* Two possibilities here:
 		   - The CPU is missing memory and no node was created.
@@ -357,8 +357,8 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 		int ht_nodeid = c->initial_apicid;
 
 		if (ht_nodeid >= 0 &&
-		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
-			node = apicid_to_node[ht_nodeid];
+		    __apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+			node = __apicid_to_node[ht_nodeid];
 		/* Pick a nearby node */
 		if (!node_online(node))
 			node = nearby_node(apicid);
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index d16c2c5..6052004 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -279,11 +279,10 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	unsigned node;
 	int cpu = smp_processor_id();
-	int apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
 
 	/* Don't do the funky fallback heuristics the AMD version employs
 	   for now. */
-	node = apicid_to_node[apicid];
+	node = numa_cpu_node(cpu);
 	if (node == NUMA_NO_NODE || !node_online(node)) {
 		/* reuse the value from init_cpu_to_node() */
 		node = cpu_to_node(cpu);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 963c44b..4b8b72d 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -71,10 +71,6 @@
 #include <asm/smpboot_hooks.h>
 #include <asm/i8259.h>
 
-#ifdef CONFIG_X86_32
-u8 apicid_2_node[MAX_LOCAL_APIC];
-#endif
-
 /* State of each CPU */
 DEFINE_PER_CPU(int, cpu_state) = { 0 };
 
@@ -170,7 +166,7 @@ static void map_cpu_to_logical_apicid(void)
 	int cpu = smp_processor_id();
 	int node;
 
-	node = apic->numa_cpu_node(cpu);
+	node = numa_cpu_node(cpu);
 	if (!node_online(node))
 		node = first_online_node;
 
diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c
index 804a3b6..484d80c 100644
--- a/arch/x86/mm/k8topology_64.c
+++ b/arch/x86/mm/k8topology_64.c
@@ -228,7 +228,7 @@ int __init k8_scan_nodes(void)
 				nodes[i].start >> PAGE_SHIFT,
 				nodes[i].end >> PAGE_SHIFT);
 		for (j = apicid_base; j < cores + apicid_base; j++)
-			apicid_to_node[(i << bits) + j] = i;
+			set_apicid_to_node((i << bits) + j, i);
 		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
 	}
 
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 787c52c..63db99c 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -4,8 +4,12 @@
 #include <linux/bootmem.h>
 
 /*
- * Which logical CPUs are on which nodes
+ * apicid, cpu, node mappings
  */
+s16 __apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
+	[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
+};
+
 cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
 EXPORT_SYMBOL(node_to_cpumask_map);
 
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index 84a3e4c..9f27ae2 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -110,6 +110,12 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
 
 static unsigned long kva_start_pfn;
 static unsigned long kva_pages;
+
+int __cpuinit numa_cpu_node(int cpu)
+{
+	return apic->numa_cpu_node(cpu);
+}
+
 /*
  * FLAT - support for basic PC memory model with discontig enabled, essentially
  *        a single node with all available processors in it with a flat
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 7ffc9b7..47ca1b0 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -26,10 +26,6 @@ EXPORT_SYMBOL(node_data);
 
 struct memnode memnode;
 
-s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
-	[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
-};
-
 int numa_off __initdata;
 static unsigned long __initdata nodemap_addr;
 static unsigned long __initdata nodemap_size;
@@ -721,12 +717,8 @@ void __init init_cpu_to_node(void)
 	BUG_ON(cpu_to_apicid == NULL);
 
 	for_each_possible_cpu(cpu) {
-		int node;
-		u16 apicid = cpu_to_apicid[cpu];
+		int node = numa_cpu_node(cpu);
 
-		if (apicid == BAD_APICID)
-			continue;
-		node = apicid_to_node[apicid];
 		if (node == NUMA_NO_NODE)
 			continue;
 		if (!node_online(node))
@@ -736,6 +728,14 @@ void __init init_cpu_to_node(void)
 }
 #endif
 
+int __cpuinit numa_cpu_node(int cpu)
+{
+	int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
+
+	if (apicid != BAD_APICID)
+		return __apicid_to_node[apicid];
+	return NUMA_NO_NODE;
+}
 
 void __cpuinit numa_set_node(int cpu, int node)
 {
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index e55e748..7fcae55 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -255,7 +255,7 @@ int __init get_memcfg_from_srat(void)
 			 num_memory_chunks);
 
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
-		apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]);
+		set_apicid_to_node(i, pxm_to_node(apicid_to_pxm[i]));
 
 	for (j = 0; j < num_memory_chunks; j++){
 		struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index a35cb9d..1af9c6e 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -79,7 +79,7 @@ static __init void bad_srat(void)
 	printk(KERN_ERR "SRAT: SRAT not used.\n");
 	acpi_numa = -1;
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
-		apicid_to_node[i] = NUMA_NO_NODE;
+		set_apicid_to_node(i, NUMA_NO_NODE);
 	for (i = 0; i < MAX_NUMNODES; i++) {
 		nodes[i].start = nodes[i].end = 0;
 		nodes_add[i].start = nodes_add[i].end = 0;
@@ -134,7 +134,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
 	}
 
 	apic_id = pa->apic_id;
-	apicid_to_node[apic_id] = node;
+	set_apicid_to_node(apic_id, node);
 	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
 	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
@@ -168,7 +168,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 		apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
 	else
 		apic_id = pa->apic_id;
-	apicid_to_node[apic_id] = node;
+	set_apicid_to_node(apic_id, node);
 	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
 	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n",
@@ -512,13 +512,13 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes)
 		 * node, it must now point to the fake node ID.
 		 */
 		for (j = 0; j < MAX_LOCAL_APIC; j++)
-			if (apicid_to_node[j] == nid &&
+			if (__apicid_to_node[j] == nid &&
 			    fake_apicid_to_node[j] == NUMA_NO_NODE)
 				fake_apicid_to_node[j] = i;
 	}
 	for (i = 0; i < num_nodes; i++)
 		__acpi_map_pxm_to_node(fake_node_to_pxm_map[i], i);
-	memcpy(apicid_to_node, fake_apicid_to_node, sizeof(apicid_to_node));
+	memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node));
 
 	nodes_clear(nodes_parsed);
 	for (i = 0; i < num_nodes; i++)
-- 
1.7.1


  parent reply	other threads:[~2010-11-27 15:24 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-27 15:21 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#2 Tejun Heo
2010-11-27 15:21 ` [PATCH 01/16] x86: Kill unused static boot_cpu_logical_apicid in smpboot.c Tejun Heo
2010-11-27 15:21 ` [PATCH 02/16] x86: Rename x86_32 MAX_APICID to MAX_LOCAL_APIC Tejun Heo
2010-11-27 15:21 ` [PATCH 03/16] x86: Make default_send_IPI_mask_sequence/allbutself_logical() 32bit only Tejun Heo
2010-11-27 15:21 ` [PATCH 04/16] x86: Use local variable to cache smp_processor_id() in setup_local_APIC() Tejun Heo
2010-11-27 21:32   ` Cyrill Gorcunov
2010-11-30 16:17   ` [PATCH UPDATED " Tejun Heo
2010-11-30 18:11   ` [PATCH UPDATED#2 " Tejun Heo
2010-11-30 18:22     ` Cyrill Gorcunov
2010-11-30 19:42       ` Tejun Heo
2010-11-30 20:52         ` Cyrill Gorcunov
2010-12-09  9:37     ` Pekka Enberg
2010-12-09 10:47   ` [PATCH UPDATED#3 04/16] x86: setup_local_APIC() must always be called with preemption disabled Tejun Heo
2010-12-09 16:17     ` Cyrill Gorcunov
2010-12-09 16:18     ` Pekka Enberg
2010-12-09 21:56     ` Thomas Gleixner
2010-12-10 11:09       ` Tejun Heo
2010-12-10 11:10         ` Thomas Gleixner
2010-12-10 12:48     ` [tip:x86/apic-cleanups] x86: apic: Cleanup and simplify setup_local_APIC() tip-bot for Tejun Heo
2010-11-27 15:21 ` [PATCH 05/16] x86: Replace cpu_2_logical_apicid[] with early percpu variable Tejun Heo
2010-11-27 15:21 ` [PATCH 06/16] x86: Always use x86_cpu_to_logical_apicid for cpu -> logical apic id Tejun Heo
2010-11-27 15:21 ` [PATCH 07/16] x86: Remove custom apic->cpu_to_logical_apicid() implementations Tejun Heo
2010-12-09 21:28   ` Thomas Gleixner
2010-12-10 11:12     ` Tejun Heo
2010-12-10 11:18       ` Thomas Gleixner
2010-11-27 15:21 ` [PATCH 08/16] x86: Use apic->cpu_to_logical_apicid() to find out logical apic id mapping early during boot Tejun Heo
2010-11-27 15:21 ` [PATCH 09/16] x86: Implement cpu_to_logical_apicid() for bigsmp_32 Tejun Heo
2010-11-27 15:21 ` [PATCH 10/16] x86: Implement cpu_to_logical_apicid() for summit_32 Tejun Heo
2010-11-27 15:22 ` [PATCH 11/16] x86: Implement cpu_to_logical_apicid() for numaq_32 Tejun Heo
2010-11-27 15:22 ` [PATCH 12/16] x86: Replace apic->apicid_to_node() with ->numa_cpu_node() Tejun Heo
2010-11-27 15:22 ` Tejun Heo [this message]
2010-12-09 21:43   ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Thomas Gleixner
2010-12-10 20:45     ` Tejun Heo
2010-12-10 20:54       ` Tejun Heo
2010-12-10 21:17         ` Yinghai Lu
2010-11-27 15:22 ` [PATCH 14/16] x86: Unify CPU -> " Tejun Heo
2010-12-09 21:49   ` Thomas Gleixner
2010-12-10 11:13     ` Tejun Heo
2010-11-27 15:22 ` [PATCH 15/16] x86: Unify node_to_cpumask_map handling " Tejun Heo
2010-11-27 15:22 ` [PATCH 16/16] x86: Unify NUMA initialization " Tejun Heo
2010-12-07 16:22 ` [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#2 Tejun Heo
  -- strict thread matches above, loose matches on Subject: below --
2010-12-28 11:48 [PATCHSET REPOST] x86: unify x86_32 and 64 NUMA init paths, take#3 Tejun Heo
2010-12-28 11:48 ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Tejun Heo
2010-12-28 20:35   ` David Rientjes
2010-12-29 10:52     ` Tejun Heo
2010-12-29 19:36       ` H. Peter Anvin
2010-12-29 22:05         ` H. Peter Anvin
2010-12-30 11:33           ` Tejun Heo
2010-12-30 17:49 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#4 Tejun Heo
2010-12-30 17:49 ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Tejun Heo
2011-01-23 13:37 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#5 Tejun Heo
2011-01-23 13:37 ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1290871325-3055-14-git-send-email-tj@kernel.org \
    --to=tj@kernel.org \
    --cc=brgerst@gmail.com \
    --cc=eric.dumazet@gmail.com \
    --cc=gorcunov@gmail.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=penberg@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.