From: Tejun Heo <tj@kernel.org>
To: linux-kernel@vger.kernel.org, hpa@zytor.com
Cc: mingo@redhat.com, tglx@linutronix.de, x86@kernel.org,
eric.dumazet@gmail.com, yinghai@kernel.org, brgerst@gmail.com,
gorcunov@gmail.com, penberg@kernel.org, shaohui.zheng@intel.com,
rientjes@google.com, Tejun Heo <tj@kernel.org>
Subject: [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit
Date: Sun, 23 Jan 2011 14:37:39 +0100 [thread overview]
Message-ID: <1295789862-25482-14-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1295789862-25482-1-git-send-email-tj@kernel.org>
The mapping between cpu/apicid and node is done via apicid_to_node[]
on 64bit and apicid_2_node[] + apic->x86_32_numa_cpu_node() on 32bit.
This difference makes it difficult to further unify 32 and 64bit NUMA
handling.
This patch unifies it by replacing both apicid_to_node[] and
apicid_2_node[] with __apicid_to_node[] array, which is accessed by
two accessors - set_apicid_to_node() and numa_cpu_node(). On 64bit,
numa_cpu_node() always consults __apicid_to_node[] directly while
32bit goes through apic->numa_cpu_node() method to allow apic
implementations to override it.
srat_detect_node() for amd cpus contains workaround for broken NUMA
configuration which assumes relationship between APIC ID, HT node ID
and NUMA topology. Leave it to access __apicid_to_node[] directly as
mapping through CPU might result in undesirable behavior change. The
comment is reformatted and updated to note the ugliness.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
---
arch/x86/include/asm/mpspec.h | 1 -
arch/x86/include/asm/numa.h | 28 +++++++++++++++++++++++
arch/x86/include/asm/numa_32.h | 6 +++++
arch/x86/include/asm/numa_64.h | 5 +--
arch/x86/kernel/acpi/boot.c | 3 +-
arch/x86/kernel/apic/apic.c | 2 +-
arch/x86/kernel/cpu/amd.c | 47 +++++++++++++++++++++++++--------------
arch/x86/kernel/cpu/intel.c | 3 +-
arch/x86/kernel/smpboot.c | 6 +----
arch/x86/mm/amdtopology_64.c | 4 +-
arch/x86/mm/numa.c | 6 ++++-
arch/x86/mm/numa_32.c | 6 +++++
arch/x86/mm/numa_64.c | 26 +++++++++------------
arch/x86/mm/srat_32.c | 2 +-
arch/x86/mm/srat_64.c | 12 +++++-----
15 files changed, 101 insertions(+), 56 deletions(-)
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index edc2a45..9c7d95f 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -25,7 +25,6 @@ extern int pic_mode;
#define MAX_IRQ_SOURCES 256
extern unsigned int def_to_bigsmp;
-extern u8 apicid_2_node[];
#ifdef CONFIG_X86_NUMAQ
extern int mp_bus_id_to_node[MAX_MP_BUSSES];
diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index 27da400..5e01c76 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -1,5 +1,33 @@
+#ifndef _ASM_X86_NUMA_H
+#define _ASM_X86_NUMA_H
+
+#include <asm/apicdef.h>
+
+#ifdef CONFIG_NUMA
+/*
+ * __apicid_to_node[] stores the raw mapping between physical apicid and
+ * node and is used to initialize cpu_to_node mapping.
+ *
+ * The mapping may be overridden by apic->numa_cpu_node() on 32bit and thus
+ * should be accessed by the accessors - set_apicid_to_node() and
+ * numa_cpu_node().
+ */
+extern s16 __apicid_to_node[MAX_LOCAL_APIC];
+
+static inline void set_apicid_to_node(int apicid, s16 node)
+{
+ __apicid_to_node[apicid] = node;
+}
+#else /* CONFIG_NUMA */
+static inline void set_apicid_to_node(int apicid, s16 node)
+{
+}
+#endif /* CONFIG_NUMA */
+
#ifdef CONFIG_X86_32
# include "numa_32.h"
#else
# include "numa_64.h"
#endif
+
+#endif /* _ASM_X86_NUMA_H */
diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h
index b0ef2b4..cdf8043 100644
--- a/arch/x86/include/asm/numa_32.h
+++ b/arch/x86/include/asm/numa_32.h
@@ -6,6 +6,12 @@ extern int numa_off;
extern int pxm_to_nid(int pxm);
extern void numa_remove_cpu(int cpu);
+#ifdef CONFIG_NUMA
+extern int __cpuinit numa_cpu_node(int apicid);
+#else /* CONFIG_NUMA */
+static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; }
+#endif /* CONFIG_NUMA */
+
#ifdef CONFIG_HIGHMEM
extern void set_highmem_pages_init(void);
#else
diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h
index 0493be3..4982a9c 100644
--- a/arch/x86/include/asm/numa_64.h
+++ b/arch/x86/include/asm/numa_64.h
@@ -2,7 +2,6 @@
#define _ASM_X86_NUMA_64_H
#include <linux/nodemask.h>
-#include <asm/apicdef.h>
struct bootnode {
u64 start;
@@ -17,8 +16,6 @@ extern int compute_hash_shift(struct bootnode *nodes, int numblks,
extern void numa_init_array(void);
extern int numa_off;
-extern s16 apicid_to_node[MAX_LOCAL_APIC];
-
extern unsigned long numa_free_all_bootmem(void);
extern void setup_node_bootmem(int nodeid, unsigned long start,
unsigned long end);
@@ -32,6 +29,7 @@ extern void setup_node_bootmem(int nodeid, unsigned long start,
#define NODE_MIN_SIZE (4*1024*1024)
extern void __init init_cpu_to_node(void);
+extern int __cpuinit numa_cpu_node(int cpu);
extern void __cpuinit numa_set_node(int cpu, int node);
extern void __cpuinit numa_clear_node(int cpu);
extern void __cpuinit numa_add_cpu(int cpu);
@@ -44,6 +42,7 @@ void numa_emu_cmdline(char *);
#endif /* CONFIG_NUMA_EMU */
#else
static inline void init_cpu_to_node(void) { }
+static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; }
static inline void numa_set_node(int cpu, int node) { }
static inline void numa_clear_node(int cpu) { }
static inline void numa_add_cpu(int cpu, int node) { }
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index b3a7113..a7bca59 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -589,11 +589,10 @@ static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
nid = acpi_get_node(handle);
if (nid == -1 || !node_online(nid))
return;
+ set_apicid_to_node(physid, nid);
#ifdef CONFIG_X86_64
- apicid_to_node[physid] = nid;
numa_set_node(cpu, nid);
#else /* CONFIG_X86_32 */
- apicid_2_node[physid] = nid;
cpu_to_node_map[cpu] = nid;
#endif
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0f4f3c1..4686ea5 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2026,7 +2026,7 @@ int default_x86_32_numa_cpu_node(int cpu)
int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
if (apicid != BAD_APICID)
- return apicid_2_node[apicid];
+ return __apicid_to_node[apicid];
return NUMA_NO_NODE;
#else
return 0;
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 7c7bedb..3cce8f2 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -234,17 +234,21 @@ static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
#endif
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+/*
+ * To workaround broken NUMA config. Read the comment in
+ * srat_detect_node().
+ */
static int __cpuinit nearby_node(int apicid)
{
int i, node;
for (i = apicid - 1; i >= 0; i--) {
- node = apicid_to_node[i];
+ node = __apicid_to_node[i];
if (node != NUMA_NO_NODE && node_online(node))
return node;
}
for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
- node = apicid_to_node[i];
+ node = __apicid_to_node[i];
if (node != NUMA_NO_NODE && node_online(node))
return node;
}
@@ -339,26 +343,35 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
int node;
unsigned apicid = c->apicid;
- node = per_cpu(cpu_llc_id, cpu);
+ node = numa_cpu_node(cpu);
+ if (node == NUMA_NO_NODE)
+ node = per_cpu(cpu_llc_id, cpu);
- if (apicid_to_node[apicid] != NUMA_NO_NODE)
- node = apicid_to_node[apicid];
if (!node_online(node)) {
- /* Two possibilities here:
- - The CPU is missing memory and no node was created.
- In that case try picking one from a nearby CPU
- - The APIC IDs differ from the HyperTransport node IDs
- which the K8 northbridge parsing fills in.
- Assume they are all increased by a constant offset,
- but in the same order as the HT nodeids.
- If that doesn't result in a usable node fall back to the
- path for the previous case. */
-
+ /*
+ * Two possibilities here:
+ *
+ * - The CPU is missing memory and no node was created. In
+ * that case try picking one from a nearby CPU.
+ *
+ * - The APIC IDs differ from the HyperTransport node IDs
+ * which the K8 northbridge parsing fills in. Assume
+ * they are all increased by a constant offset, but in
+ * the same order as the HT nodeids. If that doesn't
+ * result in a usable node fall back to the path for the
+ * previous case.
+ *
+ * This workaround operates directly on the mapping between
+ * APIC ID and NUMA node, assuming certain relationship
+ * between APIC ID, HT node ID and NUMA topology. As going
+ * through CPU mapping may alter the outcome, directly
+ * access __apicid_to_node[].
+ */
int ht_nodeid = c->initial_apicid;
if (ht_nodeid >= 0 &&
- apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
- node = apicid_to_node[ht_nodeid];
+ __apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+ node = __apicid_to_node[ht_nodeid];
/* Pick a nearby node */
if (!node_online(node))
node = nearby_node(apicid);
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index d16c2c5..6052004 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -279,11 +279,10 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
unsigned node;
int cpu = smp_processor_id();
- int apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
/* Don't do the funky fallback heuristics the AMD version employs
for now. */
- node = apicid_to_node[apicid];
+ node = numa_cpu_node(cpu);
if (node == NUMA_NO_NODE || !node_online(node)) {
/* reuse the value from init_cpu_to_node() */
node = cpu_to_node(cpu);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index e7e570f..d6afd57 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -71,10 +71,6 @@
#include <asm/smpboot_hooks.h>
#include <asm/i8259.h>
-#ifdef CONFIG_X86_32
-u8 apicid_2_node[MAX_LOCAL_APIC];
-#endif
-
/* State of each CPU */
DEFINE_PER_CPU(int, cpu_state) = { 0 };
@@ -170,7 +166,7 @@ static void map_cpu_to_logical_apicid(void)
int cpu = smp_processor_id();
int node;
- node = apic->x86_32_numa_cpu_node(cpu);
+ node = numa_cpu_node(cpu);
if (!node_online(node))
node = first_online_node;
diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c
index f21962c..c7fae38 100644
--- a/arch/x86/mm/amdtopology_64.c
+++ b/arch/x86/mm/amdtopology_64.c
@@ -247,7 +247,7 @@ void __init amd_fake_nodes(const struct bootnode *nodes, int nr_nodes)
__acpi_map_pxm_to_node(nid, i);
#endif
}
- memcpy(apicid_to_node, fake_apicid_to_node, sizeof(apicid_to_node));
+ memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node));
}
#endif /* CONFIG_NUMA_EMU */
@@ -285,7 +285,7 @@ int __init amd_scan_nodes(void)
nodes[i].start >> PAGE_SHIFT,
nodes[i].end >> PAGE_SHIFT);
for (j = apicid_base; j < cores + apicid_base; j++)
- apicid_to_node[(i << bits) + j] = i;
+ set_apicid_to_node((i << bits) + j, i);
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
}
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index ebf6d78..480b357 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -26,8 +26,12 @@ static __init int numa_setup(char *opt)
early_param("numa", numa_setup);
/*
- * Which logical CPUs are on which nodes
+ * apicid, cpu, node mappings
*/
+s16 __apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
+ [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
+};
+
cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
EXPORT_SYMBOL(node_to_cpumask_map);
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index 84a3e4c..8d91d22 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -110,6 +110,12 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
static unsigned long kva_start_pfn;
static unsigned long kva_pages;
+
+int __cpuinit numa_cpu_node(int cpu)
+{
+ return apic->x86_32_numa_cpu_node(cpu);
+}
+
/*
* FLAT - support for basic PC memory model with discontig enabled, essentially
* a single node with all available processors in it with a flat
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 95ea155..1e1026f 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -26,10 +26,6 @@ EXPORT_SYMBOL(node_data);
struct memnode memnode;
-s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
- [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
-};
-
static unsigned long __initdata nodemap_addr;
static unsigned long __initdata nodemap_size;
@@ -716,12 +712,8 @@ void __init init_cpu_to_node(void)
BUG_ON(cpu_to_apicid == NULL);
for_each_possible_cpu(cpu) {
- int node;
- u16 apicid = cpu_to_apicid[cpu];
+ int node = numa_cpu_node(cpu);
- if (apicid == BAD_APICID)
- continue;
- node = apicid_to_node[apicid];
if (node == NUMA_NO_NODE)
continue;
if (!node_online(node))
@@ -731,6 +723,14 @@ void __init init_cpu_to_node(void)
}
#endif
+int __cpuinit numa_cpu_node(int cpu)
+{
+ int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
+
+ if (apicid != BAD_APICID)
+ return __apicid_to_node[apicid];
+ return NUMA_NO_NODE;
+}
void __cpuinit numa_set_node(int cpu, int node)
{
@@ -776,13 +776,9 @@ void __cpuinit numa_remove_cpu(int cpu)
void __cpuinit numa_add_cpu(int cpu)
{
unsigned long addr;
- u16 apicid;
- int physnid;
- int nid = NUMA_NO_NODE;
+ int physnid, nid;
- apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
- if (apicid != BAD_APICID)
- nid = apicid_to_node[apicid];
+ nid = numa_cpu_node(cpu);
if (nid == NUMA_NO_NODE)
nid = early_cpu_to_node(cpu);
BUG_ON(nid == NUMA_NO_NODE || !node_online(nid));
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 6027a48..48651c6 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -255,7 +255,7 @@ int __init get_memcfg_from_srat(void)
num_memory_chunks);
for (i = 0; i < MAX_LOCAL_APIC; i++)
- apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]);
+ set_apicid_to_node(i, pxm_to_node(apicid_to_pxm[i]));
for (j = 0; j < num_memory_chunks; j++){
struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 603d285..9a97261 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -79,7 +79,7 @@ static __init void bad_srat(void)
printk(KERN_ERR "SRAT: SRAT not used.\n");
acpi_numa = -1;
for (i = 0; i < MAX_LOCAL_APIC; i++)
- apicid_to_node[i] = NUMA_NO_NODE;
+ set_apicid_to_node(i, NUMA_NO_NODE);
for (i = 0; i < MAX_NUMNODES; i++) {
nodes[i].start = nodes[i].end = 0;
nodes_add[i].start = nodes_add[i].end = 0;
@@ -138,7 +138,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
return;
}
- apicid_to_node[apic_id] = node;
+ set_apicid_to_node(apic_id, node);
node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
@@ -178,7 +178,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
return;
}
- apicid_to_node[apic_id] = node;
+ set_apicid_to_node(apic_id, node);
node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n",
@@ -521,7 +521,7 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes)
* node, it must now point to the fake node ID.
*/
for (j = 0; j < MAX_LOCAL_APIC; j++)
- if (apicid_to_node[j] == nid &&
+ if (__apicid_to_node[j] == nid &&
fake_apicid_to_node[j] == NUMA_NO_NODE)
fake_apicid_to_node[j] = i;
}
@@ -532,13 +532,13 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes)
* value.
*/
for (i = 0; i < MAX_LOCAL_APIC; i++)
- if (apicid_to_node[i] != NUMA_NO_NODE &&
+ if (__apicid_to_node[i] != NUMA_NO_NODE &&
fake_apicid_to_node[i] == NUMA_NO_NODE)
fake_apicid_to_node[i] = 0;
for (i = 0; i < num_nodes; i++)
__acpi_map_pxm_to_node(fake_node_to_pxm_map[i], i);
- memcpy(apicid_to_node, fake_apicid_to_node, sizeof(apicid_to_node));
+ memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node));
nodes_clear(nodes_parsed);
for (i = 0; i < num_nodes; i++)
--
1.7.1
next prev parent reply other threads:[~2011-01-23 13:38 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-23 13:37 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#5 Tejun Heo
2011-01-23 13:37 ` [PATCH 01/16] x86: Kill unused static boot_cpu_logical_apicid in smpboot.c Tejun Heo
2011-01-24 19:50 ` Yinghai Lu
2011-01-28 14:37 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 02/16] x86: Drop x86_32 MAX_APICID Tejun Heo
2011-01-24 19:48 ` Yinghai Lu
2011-01-28 14:37 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 03/16] x86: Make default_send_IPI_mask_sequence/allbutself_logical() 32bit only Tejun Heo
2011-01-24 19:55 ` Yinghai Lu
2011-01-28 14:37 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 04/16] x86: Replace cpu_2_logical_apicid[] with early percpu variable Tejun Heo
2011-01-24 19:58 ` Yinghai Lu
2011-01-24 20:04 ` Tejun Heo
2011-01-28 14:38 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 05/16] x86: Always use x86_cpu_to_logical_apicid for cpu -> logical apic id Tejun Heo
2011-01-28 14:38 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 06/16] x86: Kill apic->cpu_to_logical_apicid() Tejun Heo
2011-01-28 14:39 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 07/16] x86: Add apic->x86_32_early_logical_apicid() Tejun Heo
2011-01-28 14:39 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 08/16] x86: Implement the default x86_32_early_logical_apicid() Tejun Heo
2011-01-28 14:39 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 09/16] x86: Implement x86_32_early_logical_apicid() for bigsmp_32 Tejun Heo
2011-01-28 14:40 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 10/16] x86: Implement x86_32_early_logical_apicid() for summit_32 Tejun Heo
2011-01-28 14:40 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 11/16] x86: Implement x86_32_early_logical_apicid() for numaq_32 Tejun Heo
2011-01-28 14:40 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 12/16] x86: Replace apic->apicid_to_node() with ->x86_32_numa_cpu_node() Tejun Heo
2011-01-28 14:41 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` Tejun Heo [this message]
2011-01-28 14:41 ` [tip:x86/numa] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit tip-bot for Tejun Heo
2011-01-28 20:33 ` Yinghai Lu
2011-01-31 15:53 ` Tejun Heo
2011-01-31 19:55 ` Yinghai Lu
2011-01-23 13:37 ` [PATCH 14/16] x86: Unify CPU -> " Tejun Heo
2011-01-28 14:42 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 15/16] x86: Unify node_to_cpumask_map handling " Tejun Heo
2011-01-28 14:42 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-23 13:37 ` [PATCH 16/16] x86: Unify NUMA initialization " Tejun Heo
2011-01-28 14:42 ` [tip:x86/numa] " tip-bot for Tejun Heo
2011-01-28 13:45 ` [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#5 Tejun Heo
2011-01-28 15:29 ` Ingo Molnar
2011-01-28 16:22 ` [PATCH] x86: fix build failure on X86_UP_APIC Tejun Heo
2011-01-28 16:58 ` [tip:x86/numa] x86: Fix " tip-bot for Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2010-12-30 17:49 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#4 Tejun Heo
2010-12-30 17:49 ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Tejun Heo
2010-12-28 11:48 [PATCHSET REPOST] x86: unify x86_32 and 64 NUMA init paths, take#3 Tejun Heo
2010-12-28 11:48 ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Tejun Heo
2010-12-28 20:35 ` David Rientjes
2010-12-29 10:52 ` Tejun Heo
2010-12-29 19:36 ` H. Peter Anvin
2010-12-29 22:05 ` H. Peter Anvin
2010-12-30 11:33 ` Tejun Heo
2010-11-27 15:21 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#2 Tejun Heo
2010-11-27 15:22 ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Tejun Heo
2010-12-09 21:43 ` Thomas Gleixner
2010-12-10 20:45 ` Tejun Heo
2010-12-10 20:54 ` Tejun Heo
2010-12-10 21:17 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295789862-25482-14-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=brgerst@gmail.com \
--cc=eric.dumazet@gmail.com \
--cc=gorcunov@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=penberg@kernel.org \
--cc=rientjes@google.com \
--cc=shaohui.zheng@intel.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.