From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 04/26] ath9k_hw: Initialize mode registers for AR9485
Date: Tue, 30 Nov 2010 23:32:33 -0800 [thread overview]
Message-ID: <1291188775-13707-5-git-send-email-vasanth@atheros.com> (raw)
In-Reply-To: <1291188775-13707-1-git-send-email-vasanth@atheros.com>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 195 ++++++++++++++++++----------
1 files changed, 129 insertions(+), 66 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 0e3e259..f01c289 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -17,6 +17,7 @@
#include "hw.h"
#include "ar9003_mac.h"
#include "ar9003_2p2_initvals.h"
+#include "ar9485_initvals.h"
/* General hardware code for the AR9003 hadware family */
@@ -39,72 +40,134 @@ static bool ar9003_hw_macversion_supported(u32 macversion)
*/
static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
{
- /* mac */
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
- ar9300_2p2_mac_core,
- ARRAY_SIZE(ar9300_2p2_mac_core), 2);
- INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
- ar9300_2p2_mac_postamble,
- ARRAY_SIZE(ar9300_2p2_mac_postamble), 5);
-
- /* bb */
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
- ar9300_2p2_baseband_core,
- ARRAY_SIZE(ar9300_2p2_baseband_core), 2);
- INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
- ar9300_2p2_baseband_postamble,
- ARRAY_SIZE(ar9300_2p2_baseband_postamble), 5);
-
- /* radio */
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
- ar9300_2p2_radio_core,
- ARRAY_SIZE(ar9300_2p2_radio_core), 2);
- INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
- ar9300_2p2_radio_postamble,
- ARRAY_SIZE(ar9300_2p2_radio_postamble), 5);
-
- /* soc */
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
- ar9300_2p2_soc_preamble,
- ARRAY_SIZE(ar9300_2p2_soc_preamble), 2);
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
- INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
- ar9300_2p2_soc_postamble,
- ARRAY_SIZE(ar9300_2p2_soc_postamble), 5);
-
- /* rx/tx gain */
- INIT_INI_ARRAY(&ah->iniModesRxGain,
- ar9300Common_rx_gain_table_2p2,
- ARRAY_SIZE(ar9300Common_rx_gain_table_2p2), 2);
- INIT_INI_ARRAY(&ah->iniModesTxGain,
- ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
- ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
- 5);
-
- /* Load PCIE SERDES settings from INI */
-
- /* Awake Setting */
-
- INIT_INI_ARRAY(&ah->iniPcieSerdes,
- ar9300PciePhy_pll_on_clkreq_disable_L1_2p2,
- ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2),
- 2);
-
- /* Sleep Setting */
-
- INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
- ar9300PciePhy_clkreq_enable_L1_2p2,
- ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p2),
- 2);
-
- /* Fast clock modal settings */
- INIT_INI_ARRAY(&ah->iniModesAdditional,
- ar9300Modes_fast_clock_2p2,
- ARRAY_SIZE(ar9300Modes_fast_clock_2p2),
- 3);
+ if (AR_SREV_9485(ah)) {
+ /* mac */
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+ ar9485_1_0_mac_core,
+ ARRAY_SIZE(ar9485_1_0_mac_core), 2);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+ ar9485_1_0_mac_postamble,
+ ARRAY_SIZE(ar9485_1_0_mac_postamble), 5);
+
+ /* bb */
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], ar9485_1_0,
+ ARRAY_SIZE(ar9485_1_0), 2);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+ ar9485_1_0_baseband_core,
+ ARRAY_SIZE(ar9485_1_0_baseband_core), 2);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+ ar9485_1_0_baseband_postamble,
+ ARRAY_SIZE(ar9485_1_0_baseband_postamble), 5);
+
+ /* radio */
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+ ar9485_1_0_radio_core,
+ ARRAY_SIZE(ar9485_1_0_radio_core), 2);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+ ar9485_1_0_radio_postamble,
+ ARRAY_SIZE(ar9485_1_0_radio_postamble), 2);
+
+ /* soc */
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+ ar9485_1_0_soc_preamble,
+ ARRAY_SIZE(ar9485_1_0_soc_preamble), 2);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST], NULL, 0, 0);
+
+ /* rx/tx gain */
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9485Common_rx_gain_1_0,
+ ARRAY_SIZE(ar9485Common_rx_gain_1_0), 2);
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9485Modes_lowest_ob_db_tx_gain_1_0,
+ ARRAY_SIZE(ar9485Modes_lowest_ob_db_tx_gain_1_0),
+ 5);
+
+ /* Load PCIE SERDES settings from INI */
+
+ /* Awake Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1,
+ ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1),
+ 2);
+
+ /* Sleep Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+ ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1,
+ ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1),
+ 2);
+ } else {
+ /* mac */
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+ ar9300_2p2_mac_core,
+ ARRAY_SIZE(ar9300_2p2_mac_core), 2);
+ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+ ar9300_2p2_mac_postamble,
+ ARRAY_SIZE(ar9300_2p2_mac_postamble), 5);
+
+ /* bb */
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+ ar9300_2p2_baseband_core,
+ ARRAY_SIZE(ar9300_2p2_baseband_core), 2);
+ INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+ ar9300_2p2_baseband_postamble,
+ ARRAY_SIZE(ar9300_2p2_baseband_postamble), 5);
+
+ /* radio */
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+ ar9300_2p2_radio_core,
+ ARRAY_SIZE(ar9300_2p2_radio_core), 2);
+ INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+ ar9300_2p2_radio_postamble,
+ ARRAY_SIZE(ar9300_2p2_radio_postamble), 5);
+
+ /* soc */
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+ ar9300_2p2_soc_preamble,
+ ARRAY_SIZE(ar9300_2p2_soc_preamble), 2);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
+ INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
+ ar9300_2p2_soc_postamble,
+ ARRAY_SIZE(ar9300_2p2_soc_postamble), 5);
+
+ /* rx/tx gain */
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9300Common_rx_gain_table_2p2,
+ ARRAY_SIZE(ar9300Common_rx_gain_table_2p2), 2);
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
+ ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
+ 5);
+
+ /* Load PCIE SERDES settings from INI */
+
+ /* Awake Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9300PciePhy_pll_on_clkreq_disable_L1_2p2,
+ ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2),
+ 2);
+
+ /* Sleep Setting */
+
+ INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+ ar9300PciePhy_clkreq_enable_L1_2p2,
+ ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p2),
+ 2);
+
+ /* Fast clock modal settings */
+ INIT_INI_ARRAY(&ah->iniModesAdditional,
+ ar9300Modes_fast_clock_2p2,
+ ARRAY_SIZE(ar9300Modes_fast_clock_2p2),
+ 3);
+ }
}
static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
--
1.7.0.4
next prev parent reply other threads:[~2010-12-01 7:33 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-01 7:32 [PATCH 00/26] Add support for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 01/26] ath9k_hw: Define hw version macros " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 02/26] ath9k_hw: Add initvals.h " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 03/26] ath9k_hw: Enable hw initialization " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` Vasanthakumar Thiagarajan [this message]
2010-12-01 7:32 ` [PATCH 05/26] ath9k_hw: Initialize tx/rx gain table from initvals.h " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 06/26] ath9k_hw: Eeeprom changes " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 07/26] ath9k_hw: Disable LDPC " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 08/26] ath9k: Disable TX STBC " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 09/26] ath9k: Enable extended synch for AR9485 to fix L0s recovery issue Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 10/26] ath9k: Configure pll control for AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:39 ` Felix Fietkau
2010-12-02 5:05 ` Vasanthakumar Thiagarajan
2010-12-02 5:09 ` Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 11/26] ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 from an array " Vasanthakumar Thiagarajan
2010-12-01 16:45 ` Felix Fietkau
2010-12-02 5:43 ` Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 12/26] ath9k_hw: Add a helper function to get spur channel pointer from cal data for AR9003 family Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 13/26] ath9k: Read spur channel information from eeprom for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 14/26] ath9k_hw: Configure xpa bias level " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 15/26] ath9k_hw: Read and configure antenna diversity control " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 16/26] ath9k_hw: Configure attenuation control only for chain 0 on AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:50 ` Felix Fietkau
2010-12-02 5:13 ` Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 17/26] ath9k_hw: Configure internal regulator for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 18/26] ath9k_hw: Read and configure turnning caps to regulate freq accuracy Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 19/26] ath9k_hw: Configure power control only for chain 0 on AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:51 ` Felix Fietkau
2010-12-01 7:32 ` [PATCH 20/26] ath9k_hw: Program appropriate chianmask for AR9485 before starting AGC/IQ cal Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 21/26] ath9k_hw: Define IQcal correction coefficient registers using index Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 22/26] ath9k_hw: Add IQ cal changes for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 23/26] ath9k_hw: Program appropriate register for temperature compensation cal " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 24/26] ath9k_hw: Setup paprd only for chain 0 on AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:52 ` Felix Fietkau
2010-12-01 7:32 ` [PATCH 25/26] ath9k_hw: Disable MRC CCK for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 26/26] ath9k: Add device id of AR9485 to pci table Vasanthakumar Thiagarajan
2010-12-01 7:52 ` [PATCH 00/26] Add support for AR9485 Luis R. Rodriguez
2010-12-01 8:36 ` Vasanthakumar Thiagarajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291188775-13707-5-git-send-email-vasanth@atheros.com \
--to=vasanth@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.