From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 4/8] powerpc/85xx: Convert MPC8569MDS to use common SRIO init code
Date: Tue, 11 Jan 2011 02:10:32 -0600 [thread overview]
Message-ID: <1294733436-10264-4-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1294733436-10264-3-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
* Renamed CONFIG_SYS_HAS_SRIO -> CONFIG_SYS_SRIO
board/freescale/mpc8569mds/law.c | 3 +--
include/configs/MPC8569MDS.h | 12 ++++++++----
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/board/freescale/mpc8569mds/law.c b/board/freescale/mpc8569mds/law.c
index bcd0311..4f4a93b 100644
--- a/board/freescale/mpc8569mds/law.c
+++ b/board/freescale/mpc8569mds/law.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd at denx.de.
@@ -52,7 +52,6 @@ struct law_entry law_table[] = {
SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_1G, LAW_TRGT_IF_DDR),
#endif
SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
- SET_LAW(CONFIG_SYS_SRIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
};
int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 814c175..3372d18 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -35,6 +35,9 @@
#define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1 /* SRIO port 1 */
+
#define CONFIG_PCI 1 /* Disable PCI/PCIE */
#define CONFIG_PCIE1 1 /* PCIE controller */
#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
@@ -355,9 +358,10 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
-#define CONFIG_SYS_SRIO_MEM_VIRT 0xc0000000
-#define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000
-#define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000
+#define CONFIG_SYS_SRIO1_MEM_VIRT 0xC0000000
+#define CONFIG_SYS_SRIO1_MEM_BUS 0xC0000000
+#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BUS
+#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */
#ifdef CONFIG_QE
/*
--
1.7.2.3
next prev parent reply other threads:[~2011-01-11 8:10 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-06 16:58 [U-Boot] [PATCH 1/7] powerpc/8xxx: Refactor SRIO initialization into common code Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 2/7] powerpc/85xx: Convert MPC8548CDS to use common SRIO init code Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 3/7] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 4/7] powerpc/85xx: Convert MPC8569MDS " Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 5/7] powerpc/86xx: Enable " Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 6/7] powerpc/86xx: Convert MPC8641HPCN to use " Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 7/7] powerpc/86xx: Convert SBC8641 " Kumar Gala
2011-01-06 19:34 ` Paul Gortmaker
2011-01-11 6:54 ` Kumar Gala
2011-01-11 6:54 ` [U-Boot] [PATCH 6/7] powerpc/86xx: Convert MPC8641HPCN " Kumar Gala
2011-01-09 12:53 ` [U-Boot] [PATCH 5/7] powerpc/86xx: Enable " Sergei Shtylyov
2011-01-09 21:16 ` [U-Boot] [PATCH v2 1/7] powerpc/8xxx: Refactor SRIO initialization into common code Kumar Gala
2011-01-09 21:16 ` [U-Boot] [PATCH v2 5/7] powerpc/86xx: Enable common SRIO init code Kumar Gala
2011-01-11 6:54 ` Kumar Gala
2011-01-11 6:53 ` [U-Boot] [PATCH v2 1/7] powerpc/8xxx: Refactor SRIO initialization into common code Kumar Gala
2011-01-11 7:09 ` Wolfgang Denk
2011-01-11 8:11 ` Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 1/8] " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 2/8] powerpc/85xx: Convert MPC8548CDS to use common SRIO init code Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 3/8] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-11 8:10 ` Kumar Gala [this message]
2011-01-11 8:10 ` [U-Boot] [PATCH v3 5/8] powerpc/86xx: Enable " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 6/8] powerpc/86xx: Convert MPC8641HPCN to use " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 7/8] powerpc/86xx: Convert SBC8641 " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 8/8] powerpc/85xx: Add SRIO support to P2020DS Kumar Gala
2011-01-11 14:14 ` Kumar Gala
2011-01-11 14:14 ` [U-Boot] [PATCH v3 7/8] powerpc/86xx: Convert SBC8641 to use common SRIO init code Kumar Gala
2011-01-11 14:14 ` [U-Boot] [PATCH v3 6/8] powerpc/86xx: Convert MPC8641HPCN " Kumar Gala
2011-01-11 14:13 ` [U-Boot] [PATCH v3 5/8] powerpc/86xx: Enable " Kumar Gala
2011-01-11 14:13 ` [U-Boot] [PATCH v3 4/8] powerpc/85xx: Convert MPC8569MDS to use " Kumar Gala
2011-01-11 14:13 ` [U-Boot] [PATCH v3 3/8] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-11 14:13 ` [U-Boot] [PATCH v3 2/8] powerpc/85xx: Convert MPC8548CDS " Kumar Gala
2011-01-11 9:46 ` [U-Boot] [PATCH v3 1/8] powerpc/8xxx: Refactor SRIO initialization into common code Wolfgang Denk
2011-01-11 14:13 ` Kumar Gala
2011-01-11 6:54 ` [U-Boot] [PATCH 4/7] powerpc/85xx: Convert MPC8569MDS to use common SRIO init code Kumar Gala
2011-01-11 6:54 ` [U-Boot] [PATCH 3/7] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-11 6:54 ` [U-Boot] [PATCH 2/7] powerpc/85xx: Convert MPC8548CDS " Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1294733436-10264-4-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.