All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 7/8] powerpc/86xx: Convert SBC8641 to use common SRIO init code
Date: Tue, 11 Jan 2011 02:10:35 -0600	[thread overview]
Message-ID: <1294733436-10264-7-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1294733436-10264-6-git-send-email-galak@kernel.crashing.org>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
* Renamed CONFIG_SYS_HAS_SRIO -> CONFIG_SYS_SRIO

 board/sbc8641d/law.c       |    1 -
 include/configs/sbc8641d.h |   15 +++++++++------
 2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
index a6f60ee..14259d6 100644
--- a/board/sbc8641d/law.c
+++ b/board/sbc8641d/law.c
@@ -51,7 +51,6 @@ struct law_entry law_table[] = {
 #endif
 	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
 	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 90d84eb..8d9f931 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -57,6 +57,9 @@
  */
 #define CONFIG_SYS_SCRATCH_VA	0xe8000000
 
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1			/* SRIO port 1 */
+
 #define CONFIG_PCI		1	/* Enable PCIE */
 #define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
 #define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
@@ -297,9 +300,9 @@
 /*
  * RapidIO MMU
  */
-#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address */
-#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
-#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
+#define CONFIG_SYS_SRIO1_MEM_BASE	0xc0000000	/* base address */
+#define CONFIG_SYS_SRIO1_MEM_PHYS	CONFIG_SYS_SRIO1_MEM_BASE
+#define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
@@ -417,10 +420,10 @@
  * BAT2         512M   Cache-inhibited, guarded
  * 0xc000_0000  512M   RapidIO Memory
  */
-#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW \
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 
 /*
-- 
1.7.2.3

  reply	other threads:[~2011-01-11  8:10 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-06 16:58 [U-Boot] [PATCH 1/7] powerpc/8xxx: Refactor SRIO initialization into common code Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 2/7] powerpc/85xx: Convert MPC8548CDS to use common SRIO init code Kumar Gala
2011-01-06 16:58   ` [U-Boot] [PATCH 3/7] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-06 16:58     ` [U-Boot] [PATCH 4/7] powerpc/85xx: Convert MPC8569MDS " Kumar Gala
2011-01-06 16:58       ` [U-Boot] [PATCH 5/7] powerpc/86xx: Enable " Kumar Gala
2011-01-06 16:58         ` [U-Boot] [PATCH 6/7] powerpc/86xx: Convert MPC8641HPCN to use " Kumar Gala
2011-01-06 16:58           ` [U-Boot] [PATCH 7/7] powerpc/86xx: Convert SBC8641 " Kumar Gala
2011-01-06 19:34             ` Paul Gortmaker
2011-01-11  6:54             ` Kumar Gala
2011-01-11  6:54           ` [U-Boot] [PATCH 6/7] powerpc/86xx: Convert MPC8641HPCN " Kumar Gala
2011-01-09 12:53         ` [U-Boot] [PATCH 5/7] powerpc/86xx: Enable " Sergei Shtylyov
2011-01-09 21:16         ` [U-Boot] [PATCH v2 1/7] powerpc/8xxx: Refactor SRIO initialization into common code Kumar Gala
2011-01-09 21:16           ` [U-Boot] [PATCH v2 5/7] powerpc/86xx: Enable common SRIO init code Kumar Gala
2011-01-11  6:54             ` Kumar Gala
2011-01-11  6:53           ` [U-Boot] [PATCH v2 1/7] powerpc/8xxx: Refactor SRIO initialization into common code Kumar Gala
2011-01-11  7:09           ` Wolfgang Denk
2011-01-11  8:11             ` Kumar Gala
2011-01-11  8:10           ` [U-Boot] [PATCH v3 1/8] " Kumar Gala
2011-01-11  8:10             ` [U-Boot] [PATCH v3 2/8] powerpc/85xx: Convert MPC8548CDS to use common SRIO init code Kumar Gala
2011-01-11  8:10               ` [U-Boot] [PATCH v3 3/8] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-11  8:10                 ` [U-Boot] [PATCH v3 4/8] powerpc/85xx: Convert MPC8569MDS " Kumar Gala
2011-01-11  8:10                   ` [U-Boot] [PATCH v3 5/8] powerpc/86xx: Enable " Kumar Gala
2011-01-11  8:10                     ` [U-Boot] [PATCH v3 6/8] powerpc/86xx: Convert MPC8641HPCN to use " Kumar Gala
2011-01-11  8:10                       ` Kumar Gala [this message]
2011-01-11  8:10                         ` [U-Boot] [PATCH v3 8/8] powerpc/85xx: Add SRIO support to P2020DS Kumar Gala
2011-01-11 14:14                           ` Kumar Gala
2011-01-11 14:14                         ` [U-Boot] [PATCH v3 7/8] powerpc/86xx: Convert SBC8641 to use common SRIO init code Kumar Gala
2011-01-11 14:14                       ` [U-Boot] [PATCH v3 6/8] powerpc/86xx: Convert MPC8641HPCN " Kumar Gala
2011-01-11 14:13                     ` [U-Boot] [PATCH v3 5/8] powerpc/86xx: Enable " Kumar Gala
2011-01-11 14:13                   ` [U-Boot] [PATCH v3 4/8] powerpc/85xx: Convert MPC8569MDS to use " Kumar Gala
2011-01-11 14:13                 ` [U-Boot] [PATCH v3 3/8] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-11 14:13               ` [U-Boot] [PATCH v3 2/8] powerpc/85xx: Convert MPC8548CDS " Kumar Gala
2011-01-11  9:46             ` [U-Boot] [PATCH v3 1/8] powerpc/8xxx: Refactor SRIO initialization into common code Wolfgang Denk
2011-01-11 14:13               ` Kumar Gala
2011-01-11  6:54       ` [U-Boot] [PATCH 4/7] powerpc/85xx: Convert MPC8569MDS to use common SRIO init code Kumar Gala
2011-01-11  6:54     ` [U-Boot] [PATCH 3/7] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-11  6:54   ` [U-Boot] [PATCH 2/7] powerpc/85xx: Convert MPC8548CDS " Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1294733436-10264-7-git-send-email-galak@kernel.crashing.org \
    --to=galak@kernel.crashing.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.