[U-Boot] [PATCH 7/7] powerpc/86xx: Convert SBC8641 to use common SRIO init code

[Paul Gortmaker <paul.gortmaker@windriver.com>]

[[PATCH 7/7] powerpc/86xx: Convert SBC8641 to use common SRIO init code] On 06/01/2011 (Thu 10:58) Kumar Gala wrote:

> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> CC: Paul Gortmaker <paul.gortmaker@windriver.com>

Tested in conjuntion with the mpc85xx dev branch and Peter's patch.

For some reason flash erase doesn't work, but I'm guessing that is a
completely unrelated regression that I'll need to track down.

Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>

P.

> ---
>  board/sbc8641d/law.c       |    1 -
>  include/configs/sbc8641d.h |   15 +++++++++------
>  2 files changed, 9 insertions(+), 7 deletions(-)
> 
> diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
> index a6f60ee..14259d6 100644
> --- a/board/sbc8641d/law.c
> +++ b/board/sbc8641d/law.c
> @@ -51,7 +51,6 @@ struct law_entry law_table[] = {
>  #endif
>  	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
>  	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
> -	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
>  };
>  
>  int num_law_entries = ARRAY_SIZE(law_table);
> diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
> index 90d84eb..f425150 100644
> --- a/include/configs/sbc8641d.h
> +++ b/include/configs/sbc8641d.h
> @@ -57,6 +57,9 @@
>   */
>  #define CONFIG_SYS_SCRATCH_VA	0xe8000000
>  
> +#define CONFIG_SYS_HAS_SRIO
> +#define CONFIG_SRIO1			/* SRIO port 1 */
> +
>  #define CONFIG_PCI		1	/* Enable PCIE */
>  #define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
>  #define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
> @@ -297,9 +300,9 @@
>  /*
>   * RapidIO MMU
>   */
> -#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address */
> -#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
> -#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
> +#define CONFIG_SYS_SRIO1_MEM_BASE	0xc0000000	/* base address */
> +#define CONFIG_SYS_SRIO1_MEM_PHYS	CONFIG_SYS_SRIO1_MEM_BASE
> +#define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 128M */
>  
>  /*
>   * General PCI
> @@ -417,10 +420,10 @@
>   * BAT2         512M   Cache-inhibited, guarded
>   * 0xc000_0000  512M   RapidIO Memory
>   */
> -#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW \
> +#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \
>  			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
> -#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
> -#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
> +#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
> +#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
>  #define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
>  
>  /*
> -- 
> 1.7.2.3
>