[U-Boot] [PATCH v7 03/10] nds32/core N1213: NDS32 N12 core family N1213

[Macpaul Lin <macpaul@andestech.com>]

Add N1213 cpu core (N12 Core family) support for NDS32 arch.
This patch includes start.S for the initialize procedure of N1213.

NDS32 Core N1213 has the following hardware features.

 Core:
  - 16-/32-bit mixable instruction format
  - 32 general-purpose 32-bit registers
  - 8-stage pipeline
  - Dynamic branch prediction
  - 32/64/128/256 BTB
  - Return address stack (RAS)
  - Vector interrupts for internal/external
  - 3 HW-level nested interruptions
  - User and super-user mode support
  - Memory-mapped I/O
  - Address space up to 4GB

 Memory Management Unit:
  - TLB
  - Optional hardware page table walker
  - Two groups of page size support

 Memory Subsystem:
  - I & D cache
  - I & D local memory (LM)

 Bus Interface:
  - Synchronous/Asynchronous AHB bus: 0, 1 or 2 ports

Start procedure:
 start.S will start up the N1213 CPU core at first,
 then jump to SoC dependent "lowlevel_init.S" and
 "watchdog.S" to configure peripheral devices.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
---
 arch/nds32/cpu/n1213/Makefile   |   50 +++++
 arch/nds32/cpu/n1213/start.S    |  447 +++++++++++++++++++++++++++++++++++++++
 arch/nds32/cpu/n1213/u-boot.lds |   68 ++++++
 3 files changed, 565 insertions(+), 0 deletions(-)
 create mode 100644 arch/nds32/cpu/n1213/Makefile
 create mode 100644 arch/nds32/cpu/n1213/start.S
 create mode 100644 arch/nds32/cpu/n1213/u-boot.lds

diff --git a/arch/nds32/cpu/n1213/Makefile b/arch/nds32/cpu/n1213/Makefile
new file mode 100644
index 0000000..111d14f
--- /dev/null
+++ b/arch/nds32/cpu/n1213/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# Copyright (C) 2011 Andes Technology Corporation
+# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).o
+
+START	= start.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+START	:= $(addprefix $(obj),$(START))
+
+all:	$(obj).depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/nds32/cpu/n1213/start.S b/arch/nds32/cpu/n1213/start.S
new file mode 100644
index 0000000..b04f3a5
--- /dev/null
+++ b/arch/nds32/cpu/n1213/start.S
@@ -0,0 +1,447 @@
+/*
+ *	Andesboot - Startup Code for Whitiger core
+ *
+ *	Copyright (C) 2006	Andes Technology Corporation
+ *	Copyright (C) 2006	Shawn Lin <nobuhiro@andestech.com>
+ *	Copyright (C) 2011	Macpaul <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <version.h>
+
+/*
+ * Jump vector table for EVIC mode
+ */
+#define ENA_DCAC		2UL
+#define DIS_DCAC		~ENA_DCAC
+#define ICAC_MEM_KBF_ISET	(0x07)	 	! I Cache sets per way
+#define ICAC_MEM_KBF_IWAY	(0x07<<3)	! I cache ways
+#define ICAC_MEM_KBF_ISZ	(0x07<<6)	! I cache line size
+#define DCAC_MEM_KBF_DSET	(0x07)		! D Cache sets per way
+#define DCAC_MEM_KBF_DWAY	(0x07<<3)	! D cache ways
+#define DCAC_MEM_KBF_DSZ	(0x07<<6)	! D cache line size
+
+#define PSW			$ir0
+#define EIT_INTR_PSW		$ir1		! interruption $PSW
+#define EIT_PREV_IPSW		$ir2		! previous $IPSW
+#define EIT_IVB			$ir3		! intr vector base address
+#define EIT_EVA			$ir4		! MMU related Exception Virtual Address register */
+#define EIT_PREV_EVA		$ir5		! previous $eva
+#define EIT_ITYPE		$ir6		! interruption type
+#define EIT_PREV_ITYPE		$ir7		! prev intr type
+#define EIT_MACH_ERR		$ir8		! machine error log
+#define EIT_INTR_PC		$ir9		! Interruption PC
+#define EIT_PREV_IPC		$ir10		! previous $IPC
+#define EIT_OVL_INTR_PC		$ir11		! overflow interruption PC
+#define EIT_PREV_P0		$ir12		! prev $P0
+#define EIT_PREV_P1		$ir13		! prev $p1
+#define CR_ICAC_MEM		$cr1		! I-cache/memory config reg
+#define CR_DCAC_MEM		$cr2		! D-cache/memory config reg
+#define MR_CAC_CTL		$mr8
+
+.globl _start
+
+_start:	b	reset
+	b	tlb_fill
+	b	tlb_not_present
+	b	tlb_misc
+	b	tlb_vlpt_miss
+	b	cache_parity_error
+	b	debug
+	b	general_exception
+	b	internal_interrupt		! H0I
+	b	internal_interrupt		! H1I
+	b	internal_interrupt		! H2I
+	b	internal_interrupt		! H3I
+	b	internal_interrupt		! H4I
+	b	internal_interrupt		! H5I
+
+	.balign 16
+
+!========================================================================
+! Andesboot Startup Code (reset vector)
+!
+!	1.	bootstrap
+!		1.1 reset - start of Andesboot
+!		1.2 to superuser mode - as is when reset
+!		1.4 Do lowlevel_init
+!			- (this will jump out to lowlevel_init.S in SoC)
+!			- (lowlevel_init)
+!		1.3 Turn off watchdog timer
+!			- (this will jump out to watchdog.S in SoC)
+!			- (turnoff_watchdog)
+!	2.	Do critical init when reboot (not from mem)
+!	3.	Relocate andesboot to ram
+!	4.	Setup stack
+!	5.	Jump to second stage (start_andesboot)
+!========================================================================
+
+! Note: TEXT_BASE is defined by the (board-dependent) linker script
+_TEXT_BASE:
+	.word	CONFIG_SYS_TEXT_BASE
+
+.globl _andesboot_start
+_andesboot_start:
+	.word _start
+
+! Note: andesboot_end is defined by the (board-dependent) linker script
+.globl _andesboot_end
+_andesboot_end:
+	.word andesboot_end
+
+! _andesboot_real_end is the first usable RAM address behind Andesboot
+! and the various stacks
+.globl _andesboot_real_end
+_andesboot_real_end:
+	.word 0x0badc0de
+
+!=============================================
+! The bootstrap code of Andesboot
+!=============================================
+
+reset:
+
+load_lli:
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	jal	load_lowlevel_init
+	jral	$p0
+#endif
+
+! Set the Whitiger core to superuser mode
+! According to spec, it is already when reset
+
+turnoff_wtdog:
+#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
+	jal	load_turnoff_watchdog
+	jral	$p0
+#endif
+
+! Do CPU critical regs init only at reboot, not when booting from ram
+#ifdef CONFIG_INIT_CRITICAL
+	bal	cpu_init_crit			! Do CPU critical regs init
+#endif
+
+	.align 2
+relocate:
+	! relocate andesboot to RAM
+	jal	2f
+	!la	$r0, _start			! $r0 = source start addr
+	!l.w	$r2, _andesboot_start		! Andesboot start address
+	!l.w	$r3, _andesboot_end		! Andesboot end address
+	!sub	$r2, $r3, $r2			! $r2 = size of Andesboot
+	!l.w	$r1, _TEXT_BASE			! $r1 = destination start addr
+	move	$r0, $lp
+	la	$p0, _start
+	la	$p1, relocate+4
+	sub	$p0, $p1, $p0
+	sub	$r0, $r0, $p0
+
+	la	$p0, _andesboot_end
+	sub	$p0, $p0, $p1
+	move	$r3, $lp
+	lw	$r3, [$r3+$p0]			! _andesboot_end
+	addi	$p0, $p0, -4
+	move	$r2, $lp
+	lw	$r2, [$r2+$p0]			! _andesboot_start
+	sub	$r2, $r3, $r2
+	addi	$p0, $p0, -4
+	move	$r1, $lp
+	lw	$r1, [$r1+$p0]			! _TEXT_BASE
+
+	! $r0 = source address
+	! $r1 = destination address
+	! $r2 = size to copy
+copy_loop:
+	lmw.bim $r3, [$r0], $r10
+	smw.bim $r3, [$r1], $r10
+	addi	$r2, $r2, -32
+	bgez	$r2, copy_loop
+
+	! Set up the stack
+	l.w	$p0, _andesboot_end		! Defined by board linker script
+	li	$p1, CONFIG_STACKSIZE		! (128*1024) defined in config.h
+	add	$sp, $p0, $p1
+
+	bal	flib_init_bss_memory
+
+	! Jump to start_andesboot (2nd phase)
+	l.w	$p0, __start_andesboot
+	br	$p0
+
+__start_andesboot:	.word start_andesboot
+
+!=========================================================================
+! Initialize CPU critical registers
+!
+!	1.	Setup control registers
+!		1.1 Mask all IRQs
+!		1.2 Flush cache and TLB
+!		1.3 Disable MMU and cache
+!	2.	Setup memory timing
+!=========================================================================
+
+cpu_init_crit:
+	!push	ra
+	move	$r0, $lp
+	! Disable Interrupts by clear GIE in $PSW reg
+	setgie.d
+
+	! Flush caches and TLB
+
+	! Invalidate caches
+	bal	invalidate_icac
+	bal	invalidate_dcac
+
+	! Flush TLB
+	mfsr	$p0, $MMU_CFG
+	andi	$p0, $p0, 0x3			! MMPS
+	li	$p1, 0x2			! TLB MMU
+	bne	$p0, $p1, 1f
+	tlbop	FlushAll			! Flush TLB
+
+1:
+	! Disable MMU, Dcache
+	! Whitiger is MMU disabled when reset
+	! Disable the D$
+	mfsr	$p0, MR_CAC_CTL			! Get the $CACHE_CTL reg
+	li	$p1, DIS_DCAC
+	and	$p0, $p0, $p1			! Set DC_EN bit
+	mtsr	$p0, MR_CAC_CTL			! write back the $CACHE_CTL reg
+	isb
+
+	! RAM is initialized in the dram_init()(board/nds32/cpe.c)
+	! Remove the memsetup.S in the board directory.
+	!pop	ra
+
+	move	$lp, $r0
+2:
+	ret
+
+flib_init_bss_memory:
+	smw.adm $r4, [$sp], $r6, #0x1
+
+	la	$r4, __bss_start
+	la	$r5, __bss_end
+	move	$r6, #0
+1:
+	swi.p	 $r6, [$r4], #4
+	blt	 $r4, $r5, 1b			! Check if done..
+
+	lmw.bim $r4, [$sp], $r6, #0x1
+	ret
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+load_lowlevel_init:
+	la  $r6, lowlevel_init
+	la  $r7, load_lli + 4
+	sub $p0, $r6, $r7
+	add $p0, $p0, $lp
+ret
+#endif
+
+#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
+load_turnoff_watchdog:
+	la  $r6, turnoff_watchdog
+	la  $r7, turnoff_wtdog + 4
+	sub $p0, $r6, $r7
+	add $p0, $p0, $lp
+ret
+#endif
+
+
+!=======================================================
+! Invalidate I$
+!=======================================================
+invalidate_icac:
+	mfsr	$t0, CR_ICAC_MEM		! read $cr1(I CAC/MEM cfg. reg.) configuration
+	andi	$p0, $t0, ICAC_MEM_KBF_ISZ 	! Get the ISZ field
+	beqz	$p0, end_flush_icache		! if $p0=0, then no I CAC existed
+	srli	$p0, $p0, 6			! get $p0 the index of I$ block
+	addi	$t1, $p0, 2			! $t1= bit width of I cache line size(ISZ)
+	li	$t4, 1
+	sll	$t5, $t4, $t1			! get $t5 cache line size
+	andi	$p1, $t0, ICAC_MEM_KBF_ISET	! get the ISET field
+	addi	$t2, $p1, 6			! $t2= bit width of ISET
+	andi	$p1, $t0, ICAC_MEM_KBF_IWAY	! get bitfield of Iway
+	srli	$p1, $p1, 3
+	addi	$p1, $p1, 1			! then $p1 is I way number
+	add	$t3, $t2, $t1			! SHIFT
+	sll	$p1, $p1, $t3			! GET the total cache size
+ICAC_LOOP:
+	sub	$p1, $p1, $t5
+	cctl	$p1, L1I_IX_INVAL
+	bnez	$p1, ICAC_LOOP
+end_flush_icache:
+	ret
+
+!=======================================================
+! Invalidate D$
+!=======================================================
+invalidate_dcac:
+	mfsr	$t0, CR_DCAC_MEM		! read $cr2(D CAC/MEM cfg. reg.) configuration
+	andi	$p0, $t0, DCAC_MEM_KBF_DSZ	! Get the DSZ field
+	beqz	$p0, end_flush_dcache		! if $p0=0, then no D CAC existed
+	srli	$p0, $p0, 6			! get $p0 the index of D$ block
+	addi	$t1, $p0, 2			! $t1= bit width of D cache line size(DSZ)
+	li	$t4, 1
+	sll	$t5, $t4, $t1			! get $t5 cache line size
+	andi	$p1, $t0, DCAC_MEM_KBF_DSET	! get the DSET field
+	addi	$t2, $p1, 6			! $t2= bit width of DSET
+	andi	$p1, $t0, DCAC_MEM_KBF_DWAY	! get bitfield of D way
+	srli	$p1, $p1, 3
+	addi	$p1, $p1, 1			! then $p1 is D way number
+	add	$t3, $t2, $t1			! SHIFT
+	sll	$p1, $p1, $t3			! GET the total cache size
+DCAC_LOOP:
+	sub	$p1, $p1, $t5
+	cctl	$p1, L1D_IX_INVAL
+	bnez	$p1, DCAC_LOOP
+end_flush_dcache:
+	ret
+
+!========================================================================
+! Interrupt handling
+!========================================================================
+
+/*
+ * exception handlers
+ */
+	.align	5
+
+		.macro	SAVE_ALL
+	! FIXME: Other way to get PC?
+	! FIXME: Update according to the newest spec!!
+1:	la	 $r28, 1
+	push $r28
+		mfsr $r28, PSW			! $PSW
+		push $r28
+		mfsr $r28, EIT_EVA		! $ir1 $EVA
+		push $r28
+		mfsr $r28, EIT_ITYPE		! $ir2 $ITYPE
+		push $r28
+		mfsr $r28, EIT_MACH_ERR		! $ir3 Mach Error
+		push $r28
+		mfsr $r28, EIT_INTR_PSW		! $ir5 $IPSW
+		push $r28
+		mfsr $r28, EIT_PREV_IPSW	! $ir6 prev $IPSW
+		push $r28
+		mfsr $r28, EIT_PREV_EVA		! $ir7 prev $EVA
+		push $r28
+		mfsr $r28, EIT_PREV_ITYPE	! $ir8 prev $ITYPE
+		push $r28
+		mfsr $r28, EIT_INTR_PC		! $ir9 Interruption PC
+		push $r28
+		mfsr $r28, EIT_PREV_IPC		! $ir10 prev INTR_PC
+		push $r28
+		mfsr $r28, EIT_OVL_INTR_PC	! $ir11 Overflowed INTR_PC
+		push $r28
+		mfusr $r28, $d1.lo
+		push $r28
+		mfusr $r28, $d1.hi
+		push $r28
+		mfusr $r28, $d0.lo
+		push $r28
+		mfusr $r28, $d0.hi
+		push $r28
+		pushm $r0,$r30			/* we will also store $sp-$r31, ra-$r30, $gp-$r29, $r28-$fp */
+		addi	$sp, $sp, -4		! make room for implicit pt_regs parameters
+		.endm
+
+	.align	5
+tlb_fill:
+	SAVE_ALL
+	move	$r0, $sp			! To get the kernel stack
+	li	$r1, 1				! Determine interruption type
+	bal 	do_interruption
+
+	.align	5
+tlb_not_present:
+	SAVE_ALL
+	move	$r0, $sp			! To get the kernel stack
+	li	$r1, 2				! Determine interruption type
+	bal 	do_interruption
+
+	.align	5
+tlb_misc:
+	SAVE_ALL
+	move	$r0, $sp			! To get the kernel stack
+	li	$r1, 3				! Determine interruption type
+	bal 	do_interruption
+
+	.align	5
+tlb_vlpt_miss:
+	SAVE_ALL
+	move	$r0, $sp			! To get the kernel stack
+	li	$r1, 4				! Determine interruption type
+	bal	do_interruption
+
+	.align	5
+cache_parity_error:
+	SAVE_ALL
+	move	$r0, $sp			! To get the kernel stack
+	li	$r1, 5				! Determine interruption type
+	bal	do_interruption
+
+	.align	5
+debug:
+	SAVE_ALL
+	move	$r0, $sp			! To get the kernel stack
+	li	$r1, 6				! Determine interruption type
+	bal	do_interruption
+
+	.align	5
+general_exception:
+	SAVE_ALL
+	move	$r0, $sp			! To get the kernel stack
+	li	$r1, 7				! Determine interruption type
+	bal	do_interruption
+
+	.align	5
+internal_interrupt:
+	SAVE_ALL
+	move	$r0, $sp			! To get the kernel stack
+	li	$r1, 8				! Determine interruption type
+	bal	do_interruption
+
+	.align	5
+
+!===========================================
+!void reset_cpu(ulong addr);
+!	$r0: input address to jump to
+!===========================================
+.globl reset_cpu
+reset_cpu:
+! No need to disable MMU because we never enable it!
+
+	bal	invalidate_icac
+	bal	invalidate_dcac
+	mfsr	$p0, $MMU_CFG
+	andi	$p0, $p0, 0x3			! MMPS
+	li	$p1, 0x2			! TLB MMU
+	bne	$p0, $p1, 1f
+	tlbop	FlushAll			! Flush TLB
+1:
+	mfsr	$p0, MR_CAC_CTL			! Get the $CACHE_CTL reg
+	li	$p1, DIS_DCAC
+	and	$p0, $p0, $p1			! Clear the DC_EN bit
+	mtsr	$p0, MR_CAC_CTL			! Write back the $CACHE_CTL reg
+	br	$r0				! Jump to the input address
diff --git a/arch/nds32/cpu/n1213/u-boot.lds b/arch/nds32/cpu/n1213/u-boot.lds
new file mode 100644
index 0000000..824d05d
--- /dev/null
+++ b/arch/nds32/cpu/n1213/u-boot.lds
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-nds32", "elf32-nds32", "elf32-nds32")
+OUTPUT_ARCH(nds32)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		arch/nds32/cpu/n1213/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	__bss_end = .;
+
+	. = ALIGN(4);
+	.rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+
+	andesboot_end = .;
+
+	. = 0x02000000;
+	.u_boot_ohci_data_st : { *(.u_boot_ohci_data_st) }
+}
-- 
1.7.3.5