From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] pci: move microblaze and powerpc pci flag functions into asm-generic
Date: Tue, 12 Jul 2011 11:53:28 -0500 [thread overview]
Message-ID: <1310489612-8625-3-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1310489612-8625-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
Move separate microblaze and powerpc pci flag functions pci_set_flags,
pci_add_flags, and pci_has_flag into asm-generic/pci-bridge.h so other
archs can use them.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
arch/microblaze/include/asm/pci-bridge.h | 67 ++++-------------------------
arch/powerpc/include/asm/pci-bridge.h | 50 +----------------------
include/asm-generic/pci-bridge.h | 62 +++++++++++++++++++++++++++
3 files changed, 73 insertions(+), 106 deletions(-)
create mode 100644 include/asm-generic/pci-bridge.h
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 746df91..4cae1d5 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -10,31 +10,19 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
+#include <asm-generic/pci-bridge.h>
struct device_node;
-enum {
- /* Force re-assigning all resources (ignore firmware
- * setup completely)
- */
- PCI_REASSIGN_ALL_RSRC = 0x00000001,
-
- /* Re-assign all bus numbers */
- PCI_REASSIGN_ALL_BUS = 0x00000002,
-
- /* Do not try to assign, just use existing setup */
- PCI_PROBE_ONLY = 0x00000004,
-
- /* Don't bother with ISA alignment unless the bridge has
- * ISA forwarding enabled
- */
- PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
-
- /* Enable domain numbers in /proc */
- PCI_ENABLE_PROC_DOMAINS = 0x00000010,
- /* ... except for domain 0 */
- PCI_COMPAT_DOMAIN_0 = 0x00000020,
-};
+#ifdef CONFIG_PCI
+extern struct list_head hose_list;
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+ return 0;
+}
+#endif
/*
* Structure of a PCI controller (host bridge)
@@ -164,40 +152,5 @@ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
extern void pcibios_setup_phb_resources(struct pci_controller *hose);
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
- pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
- pci_flags |= flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
- return pci_flags & flag;
-}
-
-extern struct list_head hose_list;
-
-extern int pcibios_vaddr_is_ioport(void __iomem *address);
-#else
-static inline int pcibios_vaddr_is_ioport(void __iomem *address)
-{
- return 0;
-}
-
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
- return 0;
-}
-#endif /* CONFIG_PCI */
-
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index b3a40c3..8a9cb9f 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -10,58 +10,10 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
+#include <asm-generic/pci-bridge.h>
struct device_node;
-enum {
- /* Force re-assigning all resources (ignore firmware
- * setup completely)
- */
- PCI_REASSIGN_ALL_RSRC = 0x00000001,
-
- /* Re-assign all bus numbers */
- PCI_REASSIGN_ALL_BUS = 0x00000002,
-
- /* Do not try to assign, just use existing setup */
- PCI_PROBE_ONLY = 0x00000004,
-
- /* Don't bother with ISA alignment unless the bridge has
- * ISA forwarding enabled
- */
- PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
-
- /* Enable domain numbers in /proc */
- PCI_ENABLE_PROC_DOMAINS = 0x00000010,
- /* ... except for domain 0 */
- PCI_COMPAT_DOMAIN_0 = 0x00000020,
-};
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
- pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
- pci_flags |= flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
- return (pci_flags & flag);
-}
-#else
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
- return 0;
-}
-#endif
-
-
/*
* Structure of a PCI controller (host bridge)
*/
diff --git a/include/asm-generic/pci-bridge.h b/include/asm-generic/pci-bridge.h
new file mode 100644
index 0000000..4a5aca2
--- /dev/null
+++ b/include/asm-generic/pci-bridge.h
@@ -0,0 +1,62 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC_PCI_BRIDGE_H
+#define _ASM_GENERIC_PCI_BRIDGE_H
+
+#ifdef __KERNEL__
+
+enum {
+ /* Force re-assigning all resources (ignore firmware
+ * setup completely)
+ */
+ PCI_REASSIGN_ALL_RSRC = 0x00000001,
+
+ /* Re-assign all bus numbers */
+ PCI_REASSIGN_ALL_BUS = 0x00000002,
+
+ /* Do not try to assign, just use existing setup */
+ PCI_PROBE_ONLY = 0x00000004,
+
+ /* Don't bother with ISA alignment unless the bridge has
+ * ISA forwarding enabled
+ */
+ PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
+
+ /* Enable domain numbers in /proc */
+ PCI_ENABLE_PROC_DOMAINS = 0x00000010,
+ /* ... except for domain 0 */
+ PCI_COMPAT_DOMAIN_0 = 0x00000020,
+};
+
+#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags)
+{
+ pci_flags = flags;
+}
+
+static inline void pci_add_flags(int flags)
+{
+ pci_flags |= flags;
+}
+
+static inline int pci_has_flag(int flag)
+{
+ return pci_flags & flag;
+}
+#else
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline int pci_has_flag(int flag)
+{
+ return 0;
+}
+#endif /* CONFIG_PCI */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_GENERIC_PCI_BRIDGE_H */
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robherring2@gmail.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, arnd@arndb.de
Cc: Michal Simek <monstr@monstr.eu>,
nico@fluxnic.net, Jesse Barnes <jbarnes@virtuousgeek.org>,
Rob Herring <rob.herring@calxeda.com>
Subject: [PATCH 2/6] pci: move microblaze and powerpc pci flag functions into asm-generic
Date: Tue, 12 Jul 2011 11:53:28 -0500 [thread overview]
Message-ID: <1310489612-8625-3-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1310489612-8625-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
Move separate microblaze and powerpc pci flag functions pci_set_flags,
pci_add_flags, and pci_has_flag into asm-generic/pci-bridge.h so other
archs can use them.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
arch/microblaze/include/asm/pci-bridge.h | 67 ++++-------------------------
arch/powerpc/include/asm/pci-bridge.h | 50 +----------------------
include/asm-generic/pci-bridge.h | 62 +++++++++++++++++++++++++++
3 files changed, 73 insertions(+), 106 deletions(-)
create mode 100644 include/asm-generic/pci-bridge.h
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 746df91..4cae1d5 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -10,31 +10,19 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
+#include <asm-generic/pci-bridge.h>
struct device_node;
-enum {
- /* Force re-assigning all resources (ignore firmware
- * setup completely)
- */
- PCI_REASSIGN_ALL_RSRC = 0x00000001,
-
- /* Re-assign all bus numbers */
- PCI_REASSIGN_ALL_BUS = 0x00000002,
-
- /* Do not try to assign, just use existing setup */
- PCI_PROBE_ONLY = 0x00000004,
-
- /* Don't bother with ISA alignment unless the bridge has
- * ISA forwarding enabled
- */
- PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
-
- /* Enable domain numbers in /proc */
- PCI_ENABLE_PROC_DOMAINS = 0x00000010,
- /* ... except for domain 0 */
- PCI_COMPAT_DOMAIN_0 = 0x00000020,
-};
+#ifdef CONFIG_PCI
+extern struct list_head hose_list;
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+ return 0;
+}
+#endif
/*
* Structure of a PCI controller (host bridge)
@@ -164,40 +152,5 @@ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
extern void pcibios_setup_phb_resources(struct pci_controller *hose);
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
- pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
- pci_flags |= flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
- return pci_flags & flag;
-}
-
-extern struct list_head hose_list;
-
-extern int pcibios_vaddr_is_ioport(void __iomem *address);
-#else
-static inline int pcibios_vaddr_is_ioport(void __iomem *address)
-{
- return 0;
-}
-
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
- return 0;
-}
-#endif /* CONFIG_PCI */
-
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index b3a40c3..8a9cb9f 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -10,58 +10,10 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
+#include <asm-generic/pci-bridge.h>
struct device_node;
-enum {
- /* Force re-assigning all resources (ignore firmware
- * setup completely)
- */
- PCI_REASSIGN_ALL_RSRC = 0x00000001,
-
- /* Re-assign all bus numbers */
- PCI_REASSIGN_ALL_BUS = 0x00000002,
-
- /* Do not try to assign, just use existing setup */
- PCI_PROBE_ONLY = 0x00000004,
-
- /* Don't bother with ISA alignment unless the bridge has
- * ISA forwarding enabled
- */
- PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
-
- /* Enable domain numbers in /proc */
- PCI_ENABLE_PROC_DOMAINS = 0x00000010,
- /* ... except for domain 0 */
- PCI_COMPAT_DOMAIN_0 = 0x00000020,
-};
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
- pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
- pci_flags |= flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
- return (pci_flags & flag);
-}
-#else
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
- return 0;
-}
-#endif
-
-
/*
* Structure of a PCI controller (host bridge)
*/
diff --git a/include/asm-generic/pci-bridge.h b/include/asm-generic/pci-bridge.h
new file mode 100644
index 0000000..4a5aca2
--- /dev/null
+++ b/include/asm-generic/pci-bridge.h
@@ -0,0 +1,62 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC_PCI_BRIDGE_H
+#define _ASM_GENERIC_PCI_BRIDGE_H
+
+#ifdef __KERNEL__
+
+enum {
+ /* Force re-assigning all resources (ignore firmware
+ * setup completely)
+ */
+ PCI_REASSIGN_ALL_RSRC = 0x00000001,
+
+ /* Re-assign all bus numbers */
+ PCI_REASSIGN_ALL_BUS = 0x00000002,
+
+ /* Do not try to assign, just use existing setup */
+ PCI_PROBE_ONLY = 0x00000004,
+
+ /* Don't bother with ISA alignment unless the bridge has
+ * ISA forwarding enabled
+ */
+ PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
+
+ /* Enable domain numbers in /proc */
+ PCI_ENABLE_PROC_DOMAINS = 0x00000010,
+ /* ... except for domain 0 */
+ PCI_COMPAT_DOMAIN_0 = 0x00000020,
+};
+
+#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags)
+{
+ pci_flags = flags;
+}
+
+static inline void pci_add_flags(int flags)
+{
+ pci_flags |= flags;
+}
+
+static inline int pci_has_flag(int flag)
+{
+ return pci_flags & flag;
+}
+#else
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline int pci_has_flag(int flag)
+{
+ return 0;
+}
+#endif /* CONFIG_PCI */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_GENERIC_PCI_BRIDGE_H */
--
1.7.4.1
next prev parent reply other threads:[~2011-07-12 16:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-12 16:53 [PATCH v3 0/6] ARM: make mach/hardware.h optional Rob Herring
2011-07-12 16:53 ` Rob Herring
2011-07-12 16:53 ` [PATCH 1/6] powerpc: rename ppc_pci_*_flags to pci_*_flags Rob Herring
2011-07-12 16:53 ` Rob Herring
2011-07-12 16:53 ` Rob Herring [this message]
2011-07-12 16:53 ` [PATCH 2/6] pci: move microblaze and powerpc pci flag functions into asm-generic Rob Herring
2011-07-12 16:53 ` [PATCH 3/6] ARM: remove unnecessary mach/hardware.h includes Rob Herring
2011-07-12 16:53 ` Rob Herring
2011-07-12 16:53 ` [PATCH 4/6] ARM: pci: make pcibios_assign_all_busses use pci_has_flag Rob Herring
2011-07-12 16:53 ` Rob Herring
2011-07-22 15:53 ` Jesse Barnes
2011-07-22 15:53 ` Jesse Barnes
2011-07-12 16:53 ` [PATCH 5/6] ARM: convert PCI defines to variables Rob Herring
2011-07-12 16:53 ` Rob Herring
2011-07-12 16:53 ` [PATCH 6/6] ARM: set vga memory base at run-time Rob Herring
2011-07-12 16:53 ` Rob Herring
2011-07-14 15:22 ` [PATCH v3 0/6] ARM: make mach/hardware.h optional Arnd Bergmann
2011-07-14 15:22 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310489612-8625-3-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.