Build fails moving from 4.0.1 to 5.0.1

Build fails moving from 4.0.1 to 5.0.1

[Chris Tapp]

I've got a configuration that builds ok under 4.0.1, but when I build  
under 5.0.1 I get the following right at the end:

Installing task-poky-boot (1.0-r7) to root...
Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/ 
Vortex86DX/task-poky-boot_1.0-r7_Vortex86DX.ipk.
Installing task-sjs (1.0-r0) to root...
Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/ 
Vortex86DX/task-sjs_1.0-r0_Vortex86DX.ipk.
Unknown package 'run-postinsts'.
Collected errors:
  * satisfy_dependencies_for: Cannot satisfy the following  
dependencies for task-poky-boot:
  * 	tinylogin * 	busybox * 	modutils-initscripts * 	initscripts * 	 
console-tools * 	initscripts * 	udev * 	sysvinit * 	netbase * 	base- 
passwd *
  * opkg_install_cmd: Cannot install package task-poky-boot.
  * satisfy_dependencies_for: Cannot satisfy the following  
dependencies for task-sjs:
  * 	yocto-wallboard * 	psplash * 	syslinux *
  * opkg_install_cmd: Cannot install package task-sjs.
  * opkg_install_cmd: Cannot install package run-postinsts.
ERROR: Function 'do_rootfs' failed (see ...

If I look in tmp/work, it looks as if the missing dependencies have  
all been built and packaged within their work areas.

I tried cleaning and rebuilding 'task-sjs', but that made no  
difference to the errors reported against it.

Where should I start looking to work out what's going wrong here? Is  
it as simple as needing to add something like RDEPENDS?

Chris Tapp

opensource@keylevel.com
www.keylevel.com

Re: Build fails moving from 4.0.1 to 5.0.1

[Richard Purdie]

On Fri, 2011-08-19 at 08:29 +0100, Chris Tapp wrote:
> I've got a configuration that builds ok under 4.0.1, but when I build  
> under 5.0.1 I get the following right at the end:
> 
> Installing task-poky-boot (1.0-r7) to root...
> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/ 
> Vortex86DX/task-poky-boot_1.0-r7_Vortex86DX.ipk.
> Installing task-sjs (1.0-r0) to root...
> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/ 
> Vortex86DX/task-sjs_1.0-r0_Vortex86DX.ipk.
> Unknown package 'run-postinsts'.
> Collected errors:
>   * satisfy_dependencies_for: Cannot satisfy the following  
> dependencies for task-poky-boot:
>   * 	tinylogin * 	busybox * 	modutils-initscripts * 	initscripts * 	 
> console-tools * 	initscripts * 	udev * 	sysvinit * 	netbase * 	base- 
> passwd *
>   * opkg_install_cmd: Cannot install package task-poky-boot.
>   * satisfy_dependencies_for: Cannot satisfy the following  
> dependencies for task-sjs:
>   * 	yocto-wallboard * 	psplash * 	syslinux *
>   * opkg_install_cmd: Cannot install package task-sjs.
>   * opkg_install_cmd: Cannot install package run-postinsts.
> ERROR: Function 'do_rootfs' failed (see ...
> 
> If I look in tmp/work, it looks as if the missing dependencies have  
> all been built and packaged within their work areas.
> 
> I tried cleaning and rebuilding 'task-sjs', but that made no  
> difference to the errors reported against it.
> 
> Where should I start looking to work out what's going wrong here? Is  
> it as simple as needing to add something like RDEPENDS?

This sounds like the machine specific packages are failing to be found
so it sounds like a package feed issue. Is sounds like PACKAGE_ARCHS
isn't listing everything it needs to (such as the machine name) or the
package system isn't finding a group of packages for some other reason.

Cheers,

Richard

Re: Build fails moving from 4.0.1 to 5.0.1

[Chris Tapp]

On 19 Aug 2011, at 17:16, Richard Purdie wrote:

> On Fri, 2011-08-19 at 08:29 +0100, Chris Tapp wrote:
>> I've got a configuration that builds ok under 4.0.1, but when I build
>> under 5.0.1 I get the following right at the end:
>>
>> Installing task-poky-boot (1.0-r7) to root...
>> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
>> Vortex86DX/task-poky-boot_1.0-r7_Vortex86DX.ipk.
>> Installing task-sjs (1.0-r0) to root...
>> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
>> Vortex86DX/task-sjs_1.0-r0_Vortex86DX.ipk.
>> Unknown package 'run-postinsts'.
>> Collected errors:
>>  * satisfy_dependencies_for: Cannot satisfy the following
>> dependencies for task-poky-boot:
>>  * 	tinylogin * 	busybox * 	modutils-initscripts * 	initscripts * 	
>> console-tools * 	initscripts * 	udev * 	sysvinit * 	netbase * 	base-
>> passwd *
>>  * opkg_install_cmd: Cannot install package task-poky-boot.
>>  * satisfy_dependencies_for: Cannot satisfy the following
>> dependencies for task-sjs:
>>  * 	yocto-wallboard * 	psplash * 	syslinux *
>>  * opkg_install_cmd: Cannot install package task-sjs.
>>  * opkg_install_cmd: Cannot install package run-postinsts.
>> ERROR: Function 'do_rootfs' failed (see ...
>>
>> If I look in tmp/work, it looks as if the missing dependencies have
>> all been built and packaged within their work areas.
>>
>> I tried cleaning and rebuilding 'task-sjs', but that made no
>> difference to the errors reported against it.
>>
>> Where should I start looking to work out what's going wrong here? Is
>> it as simple as needing to add something like RDEPENDS?
>
> This sounds like the machine specific packages are failing to be found
> so it sounds like a package feed issue. Is sounds like PACKAGE_ARCHS
> isn't listing everything it needs to (such as the machine name) or the
> package system isn't finding a group of packages for some other  
> reason.

Thanks, but that's way over my head at the moment ;-)

I've searched through the meta data for PACKAGE_ARCHS, but that's not  
thrown anything up to make me think there was anything I should look at.

I'm using my own machine recipe. Is this were I should be looking?

Chris

Re: Build fails moving from 4.0.1 to 5.0.1

[Richard Purdie]

On Fri, 2011-08-19 at 20:43 +0100, Chris Tapp wrote:
> On 19 Aug 2011, at 17:16, Richard Purdie wrote:
> 
> > On Fri, 2011-08-19 at 08:29 +0100, Chris Tapp wrote:
> >> I've got a configuration that builds ok under 4.0.1, but when I build
> >> under 5.0.1 I get the following right at the end:
> >>
> >> Installing task-poky-boot (1.0-r7) to root...
> >> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
> >> Vortex86DX/task-poky-boot_1.0-r7_Vortex86DX.ipk.
> >> Installing task-sjs (1.0-r0) to root...
> >> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
> >> Vortex86DX/task-sjs_1.0-r0_Vortex86DX.ipk.
> >> Unknown package 'run-postinsts'.
> >> Collected errors:
> >>  * satisfy_dependencies_for: Cannot satisfy the following
> >> dependencies for task-poky-boot:
> >>  * 	tinylogin * 	busybox * 	modutils-initscripts * 	initscripts * 	
> >> console-tools * 	initscripts * 	udev * 	sysvinit * 	netbase * 	base-
> >> passwd *
> >>  * opkg_install_cmd: Cannot install package task-poky-boot.
> >>  * satisfy_dependencies_for: Cannot satisfy the following
> >> dependencies for task-sjs:
> >>  * 	yocto-wallboard * 	psplash * 	syslinux *
> >>  * opkg_install_cmd: Cannot install package task-sjs.
> >>  * opkg_install_cmd: Cannot install package run-postinsts.
> >> ERROR: Function 'do_rootfs' failed (see ...
> >>
> >> If I look in tmp/work, it looks as if the missing dependencies have
> >> all been built and packaged within their work areas.
> >>
> >> I tried cleaning and rebuilding 'task-sjs', but that made no
> >> difference to the errors reported against it.
> >>
> >> Where should I start looking to work out what's going wrong here? Is
> >> it as simple as needing to add something like RDEPENDS?
> >
> > This sounds like the machine specific packages are failing to be found
> > so it sounds like a package feed issue. Is sounds like PACKAGE_ARCHS
> > isn't listing everything it needs to (such as the machine name) or the
> > package system isn't finding a group of packages for some other  
> > reason.
> 
> Thanks, but that's way over my head at the moment ;-)
> 
> I've searched through the meta data for PACKAGE_ARCHS, but that's not  
> thrown anything up to make me think there was anything I should look at.
> 
> I'm using my own machine recipe. Is this were I should be looking?

Yes, I suspect something about your machine config is resulting in this
but its hard to me to say what.

You can do things like "bitbake -e | grep ^PACKAGE_ARCHS" to see the
contents of variables. I'm curious if your machine name is listed in
that list.

Cheers,

Richard

Re: Build fails moving from 4.0.1 to 5.0.1

[Chris Tapp]

On 19 Aug 2011, at 21:49, Richard Purdie wrote:

> On Fri, 2011-08-19 at 20:43 +0100, Chris Tapp wrote:
>> On 19 Aug 2011, at 17:16, Richard Purdie wrote:
>>
>>> On Fri, 2011-08-19 at 08:29 +0100, Chris Tapp wrote:
>>>> I've got a configuration that builds ok under 4.0.1, but when I  
>>>> build
>>>> under 5.0.1 I get the following right at the end:
>>>>
>>>> Installing task-poky-boot (1.0-r7) to root...
>>>> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
>>>> Vortex86DX/task-poky-boot_1.0-r7_Vortex86DX.ipk.
>>>> Installing task-sjs (1.0-r0) to root...
>>>> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
>>>> Vortex86DX/task-sjs_1.0-r0_Vortex86DX.ipk.
>>>> Unknown package 'run-postinsts'.
>>>> Collected errors:
>>>> * satisfy_dependencies_for: Cannot satisfy the following
>>>> dependencies for task-poky-boot:
>>>> * 	tinylogin * 	busybox * 	modutils-initscripts * 	initscripts * 	
>>>> console-tools * 	initscripts * 	udev * 	sysvinit * 	netbase * 	 
>>>> base-
>>>> passwd *
>>>> * opkg_install_cmd: Cannot install package task-poky-boot.
>>>> * satisfy_dependencies_for: Cannot satisfy the following
>>>> dependencies for task-sjs:
>>>> * 	yocto-wallboard * 	psplash * 	syslinux *
>>>> * opkg_install_cmd: Cannot install package task-sjs.
>>>> * opkg_install_cmd: Cannot install package run-postinsts.
>>>> ERROR: Function 'do_rootfs' failed (see ...
>>>>
>>>> If I look in tmp/work, it looks as if the missing dependencies have
>>>> all been built and packaged within their work areas.
>>>>
>>>> I tried cleaning and rebuilding 'task-sjs', but that made no
>>>> difference to the errors reported against it.
>>>>
>>>> Where should I start looking to work out what's going wrong here?  
>>>> Is
>>>> it as simple as needing to add something like RDEPENDS?
>>>
>>> This sounds like the machine specific packages are failing to be  
>>> found
>>> so it sounds like a package feed issue. Is sounds like PACKAGE_ARCHS
>>> isn't listing everything it needs to (such as the machine name) or  
>>> the
>>> package system isn't finding a group of packages for some other
>>> reason.
>>
>> Thanks, but that's way over my head at the moment ;-)
>>
>> I've searched through the meta data for PACKAGE_ARCHS, but that's not
>> thrown anything up to make me think there was anything I should  
>> look at.
>>
>> I'm using my own machine recipe. Is this were I should be looking?
>
> Yes, I suspect something about your machine config is resulting in  
> this
> but its hard to me to say what.
>
> You can do things like "bitbake -e | grep ^PACKAGE_ARCHS" to see the
> contents of variables. I'm curious if your machine name is listed in
> that list.

chris@ubuntu:~/yocto/ebox3300-build$ bitbake -e |grep "PACKAGE_ARCHS"

# PACKAGE_ARCHS=all any noarch ${PACKAGE_EXTRA_ARCHS} ${MACHINE_ARCH}
PACKAGE_ARCHS="all any noarch x86 Vortex86DX"
		ipkg_archs = bb.data.getVar('PACKAGE_ARCHS',d)
			bb.error("PACKAGE_ARCHS missing")

My machine is "Vortex86DX"

Chris Tapp

opensource@keylevel.com
www.keylevel.com

Re: Build fails moving from 4.0.1 to 5.0.1

[Richard Purdie]

On Fri, 2011-08-19 at 21:58 +0100, Chris Tapp wrote:
> On 19 Aug 2011, at 21:49, Richard Purdie wrote:
> 
> > On Fri, 2011-08-19 at 20:43 +0100, Chris Tapp wrote:
> >> On 19 Aug 2011, at 17:16, Richard Purdie wrote:
> >>
> >>> On Fri, 2011-08-19 at 08:29 +0100, Chris Tapp wrote:
> >>>> I've got a configuration that builds ok under 4.0.1, but when I  
> >>>> build
> >>>> under 5.0.1 I get the following right at the end:
> >>>>
> >>>> Installing task-poky-boot (1.0-r7) to root...
> >>>> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
> >>>> Vortex86DX/task-poky-boot_1.0-r7_Vortex86DX.ipk.
> >>>> Installing task-sjs (1.0-r0) to root...
> >>>> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
> >>>> Vortex86DX/task-sjs_1.0-r0_Vortex86DX.ipk.
> >>>> Unknown package 'run-postinsts'.
> >>>> Collected errors:
> >>>> * satisfy_dependencies_for: Cannot satisfy the following
> >>>> dependencies for task-poky-boot:
> >>>> * 	tinylogin * 	busybox * 	modutils-initscripts * 	initscripts * 	
> >>>> console-tools * 	initscripts * 	udev * 	sysvinit * 	netbase * 	 
> >>>> base-
> >>>> passwd *
> >>>> * opkg_install_cmd: Cannot install package task-poky-boot.
> >>>> * satisfy_dependencies_for: Cannot satisfy the following
> >>>> dependencies for task-sjs:
> >>>> * 	yocto-wallboard * 	psplash * 	syslinux *
> >>>> * opkg_install_cmd: Cannot install package task-sjs.
> >>>> * opkg_install_cmd: Cannot install package run-postinsts.
> >>>> ERROR: Function 'do_rootfs' failed (see ...
> >>>>
> >>>> If I look in tmp/work, it looks as if the missing dependencies have
> >>>> all been built and packaged within their work areas.
> >>>>
> >>>> I tried cleaning and rebuilding 'task-sjs', but that made no
> >>>> difference to the errors reported against it.
> >>>>
> >>>> Where should I start looking to work out what's going wrong here?  
> >>>> Is
> >>>> it as simple as needing to add something like RDEPENDS?
> >>>
> >>> This sounds like the machine specific packages are failing to be  
> >>> found
> >>> so it sounds like a package feed issue. Is sounds like PACKAGE_ARCHS
> >>> isn't listing everything it needs to (such as the machine name) or  
> >>> the
> >>> package system isn't finding a group of packages for some other
> >>> reason.
> >>
> >> Thanks, but that's way over my head at the moment ;-)
> >>
> >> I've searched through the meta data for PACKAGE_ARCHS, but that's not
> >> thrown anything up to make me think there was anything I should  
> >> look at.
> >>
> >> I'm using my own machine recipe. Is this were I should be looking?
> >
> > Yes, I suspect something about your machine config is resulting in  
> > this
> > but its hard to me to say what.
> >
> > You can do things like "bitbake -e | grep ^PACKAGE_ARCHS" to see the
> > contents of variables. I'm curious if your machine name is listed in
> > that list.
> 
> chris@ubuntu:~/yocto/ebox3300-build$ bitbake -e |grep "PACKAGE_ARCHS"
> 
> # PACKAGE_ARCHS=all any noarch ${PACKAGE_EXTRA_ARCHS} ${MACHINE_ARCH}
> PACKAGE_ARCHS="all any noarch x86 Vortex86DX"
> 		ipkg_archs = bb.data.getVar('PACKAGE_ARCHS',d)
> 			bb.error("PACKAGE_ARCHS missing")
> 
> My machine is "Vortex86DX"

What does "ls /home/chris/yocto/ebox3300-build/tmp/deploy/ipk" say?

Cheers,

Richard

Re: Build fails moving from 4.0.1 to 5.0.1

[Chris Tapp]

On 19 Aug 2011, at 22:22, Richard Purdie wrote:

> On Fri, 2011-08-19 at 21:58 +0100, Chris Tapp wrote:
>> On 19 Aug 2011, at 21:49, Richard Purdie wrote:
>>
>>> On Fri, 2011-08-19 at 20:43 +0100, Chris Tapp wrote:
>>>> On 19 Aug 2011, at 17:16, Richard Purdie wrote:
>>>>
>>>>> On Fri, 2011-08-19 at 08:29 +0100, Chris Tapp wrote:
>>>>>> I've got a configuration that builds ok under 4.0.1, but when I
>>>>>> build
>>>>>> under 5.0.1 I get the following right at the end:
>>>>>>
>>>>>> Installing task-poky-boot (1.0-r7) to root...
>>>>>> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
>>>>>> Vortex86DX/task-poky-boot_1.0-r7_Vortex86DX.ipk.
>>>>>> Installing task-sjs (1.0-r0) to root...
>>>>>> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
>>>>>> Vortex86DX/task-sjs_1.0-r0_Vortex86DX.ipk.
>>>>>> Unknown package 'run-postinsts'.
>>>>>> Collected errors:
>>>>>> * satisfy_dependencies_for: Cannot satisfy the following
>>>>>> dependencies for task-poky-boot:
>>>>>> * 	tinylogin * 	busybox * 	modutils-initscripts * 	initscripts  
>>>>>> * 	
>>>>>> console-tools * 	initscripts * 	udev * 	sysvinit * 	netbase * 	
>>>>>> base-
>>>>>> passwd *
>>>>>> * opkg_install_cmd: Cannot install package task-poky-boot.
>>>>>> * satisfy_dependencies_for: Cannot satisfy the following
>>>>>> dependencies for task-sjs:
>>>>>> * 	yocto-wallboard * 	psplash * 	syslinux *
>>>>>> * opkg_install_cmd: Cannot install package task-sjs.
>>>>>> * opkg_install_cmd: Cannot install package run-postinsts.
>>>>>> ERROR: Function 'do_rootfs' failed (see ...
>>>>>>
>>>>>> If I look in tmp/work, it looks as if the missing dependencies  
>>>>>> have
>>>>>> all been built and packaged within their work areas.
>>>>>>
>>>>>> I tried cleaning and rebuilding 'task-sjs', but that made no
>>>>>> difference to the errors reported against it.
>>>>>>
>>>>>> Where should I start looking to work out what's going wrong here?
>>>>>> Is
>>>>>> it as simple as needing to add something like RDEPENDS?
>>>>>
>>>>> This sounds like the machine specific packages are failing to be
>>>>> found
>>>>> so it sounds like a package feed issue. Is sounds like  
>>>>> PACKAGE_ARCHS
>>>>> isn't listing everything it needs to (such as the machine name) or
>>>>> the
>>>>> package system isn't finding a group of packages for some other
>>>>> reason.
>>>>
>>>> Thanks, but that's way over my head at the moment ;-)
>>>>
>>>> I've searched through the meta data for PACKAGE_ARCHS, but that's  
>>>> not
>>>> thrown anything up to make me think there was anything I should
>>>> look at.
>>>>
>>>> I'm using my own machine recipe. Is this were I should be looking?
>>>
>>> Yes, I suspect something about your machine config is resulting in
>>> this
>>> but its hard to me to say what.
>>>
>>> You can do things like "bitbake -e | grep ^PACKAGE_ARCHS" to see the
>>> contents of variables. I'm curious if your machine name is listed in
>>> that list.
>>
>> chris@ubuntu:~/yocto/ebox3300-build$ bitbake -e |grep "PACKAGE_ARCHS"
>>
>> # PACKAGE_ARCHS=all any noarch ${PACKAGE_EXTRA_ARCHS} ${MACHINE_ARCH}
>> PACKAGE_ARCHS="all any noarch x86 Vortex86DX"
>> 		ipkg_archs = bb.data.getVar('PACKAGE_ARCHS',d)
>> 			bb.error("PACKAGE_ARCHS missing")
>>
>> My machine is "Vortex86DX"
>
> What does "ls /home/chris/yocto/ebox3300-build/tmp/deploy/ipk" say?
>

drwxr-xr-x 2 chris chris   4096 2011-08-19 21:12 all
drwxr-xr-x 2 chris chris 143360 2011-08-19 21:12 i586
-rw-r--r-- 1 chris chris      0 2011-08-19 21:12 Packages
-rw-r--r-- 1 chris chris      0 2011-08-19 21:12 Packages.filelist
-rwxr--r-- 1 chris chris      0 2011-08-19 03:19 Packages.flock
-rwxr--r-- 1 chris chris     20 2011-08-19 21:12 Packages.gz
-rw-r--r-- 1 chris chris      0 2011-08-19 21:12 Packages.stamps
drwxr-xr-x 2 chris chris   4096 2011-08-19 21:12 Vortex86DX

Chris

Re: Build fails moving from 4.0.1 to 5.0.1

[Chris Tapp]

On 21 Aug 2011, at 10:19, Chris Tapp wrote:

>> What does "ls /home/chris/yocto/ebox3300-build/tmp/deploy/ipk" say?
>>
>
> drwxr-xr-x 2 chris chris   4096 2011-08-19 21:12 all
> drwxr-xr-x 2 chris chris 143360 2011-08-19 21:12 i586
> -rw-r--r-- 1 chris chris      0 2011-08-19 21:12 Packages
> -rw-r--r-- 1 chris chris      0 2011-08-19 21:12 Packages.filelist
> -rwxr--r-- 1 chris chris      0 2011-08-19 03:19 Packages.flock
> -rwxr--r-- 1 chris chris     20 2011-08-19 21:12 Packages.gz
> -rw-r--r-- 1 chris chris      0 2011-08-19 21:12 Packages.stamps
> drwxr-xr-x 2 chris chris   4096 2011-08-19 21:12 Vortex86DX


I don't know if it helps, but all the missing dependencies have .ipk  
files in the i586 directory shown above.

Chris Tapp

opensource@keylevel.com
www.keylevel.com