All of lore.kernel.org
 help / color / mirror / Atom feed
From: Artem Bityutskiy <dedekind1@gmail.com>
To: Jamie Iles <jamie@jamieiles.com>
Cc: Scott Wood <scottwood@freescale.com>,
	David Woodhouse <dwmw2@infradead.org>,
	devicetree-discuss@lists.ozlabs.org,
	linux-mtd@lists.infradead.org,
	Grant Likely <grant.likely@secretlab.ca>
Subject: Re: [PATCHv4] mtd: gpio-nand: add device tree bindings
Date: Sat, 20 Aug 2011 06:39:10 +0300	[thread overview]
Message-ID: <1313811552.4475.10.camel@koala> (raw)
In-Reply-To: <20110815152447.GI2636@pulham.picochip.com>

On Mon, 2011-08-15 at 16:24 +0100, Jamie Iles wrote:
> From: Jamie Iles <jamie@jamieiles.com>
> Subject: [PATCH] mtd: gpio-nand: add device tree bindings
> 
> Add device tree bindings so that the gpio-nand driver may be
> instantiated from the device tree.  This also allows the partitions
> to be specified in the device tree.
> 
> v5:	- fold dt config helpers into a single gpio_nand_of_get_config()
> v4:	- get io sync address from gpio-control-nand,io-sync-reg
> 	  property rather than a resource
> 	- clarified a few details in the binding
> v3:	- remove redundant cast and a couple of whitespace/naming
> 	  changes
> v2:	- add CONFIG_OF guards for non-dt platforms
> 	- compatible becomes gpio-control-nand
> 	- clarify some binding details
> 
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Artem Bityutskiy <dedekind1@gmail.com>
> Cc: Scott Wood <scottwood@freescale.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Signed-off-by: Jamie Iles <jamie@jamieiles.com>

Pushed this patch to l2-mtd-2.6.git, thanks.

P.S. probably it should contain some reviewed-by tags? I can always add
them, though, if needed.

-- 
Best Regards,
Artem Bityutskiy (Битюцкий Артём)

WARNING: multiple messages have this Message-ID (diff)
From: Artem Bityutskiy <dedekind1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
Cc: Scott Wood <scottwood-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
	David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCHv4] mtd: gpio-nand: add device tree bindings
Date: Sat, 20 Aug 2011 06:39:10 +0300	[thread overview]
Message-ID: <1313811552.4475.10.camel@koala> (raw)
In-Reply-To: <20110815152447.GI2636-apL1N+EY0C9YtYNIL7UdTEEOCMrvLtNR@public.gmane.org>

On Mon, 2011-08-15 at 16:24 +0100, Jamie Iles wrote:
> From: Jamie Iles <jamie@jamieiles.com>
> Subject: [PATCH] mtd: gpio-nand: add device tree bindings
> 
> Add device tree bindings so that the gpio-nand driver may be
> instantiated from the device tree.  This also allows the partitions
> to be specified in the device tree.
> 
> v5:	- fold dt config helpers into a single gpio_nand_of_get_config()
> v4:	- get io sync address from gpio-control-nand,io-sync-reg
> 	  property rather than a resource
> 	- clarified a few details in the binding
> v3:	- remove redundant cast and a couple of whitespace/naming
> 	  changes
> v2:	- add CONFIG_OF guards for non-dt platforms
> 	- compatible becomes gpio-control-nand
> 	- clarify some binding details
> 
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Artem Bityutskiy <dedekind1@gmail.com>
> Cc: Scott Wood <scottwood@freescale.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Signed-off-by: Jamie Iles <jamie@jamieiles.com>

Pushed this patch to l2-mtd-2.6.git, thanks.

P.S. probably it should contain some reviewed-by tags? I can always add
them, though, if needed.

-- 
Best Regards,
Artem Bityutskiy (Битюцкий Артём)

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

  parent reply	other threads:[~2011-08-20  3:39 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-09 15:12 [PATCHv4] mtd: gpio-nand: add device tree bindings Jamie Iles
2011-08-09 15:12 ` Jamie Iles
2011-08-10 15:13 ` Scott Wood
2011-08-10 15:13   ` Scott Wood
2011-08-11  9:00   ` Jamie Iles
2011-08-11  9:00     ` Jamie Iles
2011-08-15 13:57 ` Artem Bityutskiy
2011-08-15 13:57   ` Artem Bityutskiy
2011-08-15 13:58   ` Jamie Iles
2011-08-15 13:58     ` Jamie Iles
2011-08-15 14:28 ` Artem Bityutskiy
2011-08-15 14:28   ` Artem Bityutskiy
2011-08-15 14:38   ` Jamie Iles
2011-08-15 14:38     ` Jamie Iles
2011-08-15 14:45     ` Artem Bityutskiy
2011-08-15 14:45       ` Artem Bityutskiy
2011-08-15 15:24       ` Jamie Iles
2011-08-15 15:24         ` Jamie Iles
2011-08-19 19:51         ` Artem Bityutskiy
2011-08-19 19:51           ` Artem Bityutskiy
2011-08-19 21:18           ` Jamie Iles
2011-08-19 21:18             ` Jamie Iles
2011-08-20  3:39         ` Artem Bityutskiy [this message]
2011-08-20  3:39           ` Artem Bityutskiy
2011-08-20  6:38           ` Jamie Iles
2011-08-20  6:38             ` Jamie Iles
2011-08-20 12:09             ` Artem Bityutskiy
2011-08-20 12:09               ` Artem Bityutskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1313811552.4475.10.camel@koala \
    --to=dedekind1@gmail.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=dwmw2@infradead.org \
    --cc=grant.likely@secretlab.ca \
    --cc=jamie@jamieiles.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=scottwood@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.