From: Jamie Iles <jamie@jamieiles.com>
To: Artem Bityutskiy <dedekind1@gmail.com>
Cc: devicetree-discuss@lists.ozlabs.org,
Grant Likely <grant.likely@secretlab.ca>,
linux-mtd@lists.infradead.org,
Scott Wood <scottwood@freescale.com>,
Jamie Iles <jamie@jamieiles.com>,
David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCHv4] mtd: gpio-nand: add device tree bindings
Date: Sat, 20 Aug 2011 07:38:16 +0100 [thread overview]
Message-ID: <20110820063816.GA18892@gallagher> (raw)
In-Reply-To: <1313811552.4475.10.camel@koala>
Hi Artem,
On Sat, Aug 20, 2011 at 06:39:10AM +0300, Artem Bityutskiy wrote:
> On Mon, 2011-08-15 at 16:24 +0100, Jamie Iles wrote:
> > From: Jamie Iles <jamie@jamieiles.com>
> > Subject: [PATCH] mtd: gpio-nand: add device tree bindings
> >
> > Add device tree bindings so that the gpio-nand driver may be
> > instantiated from the device tree. This also allows the partitions
> > to be specified in the device tree.
> >
> > v5: - fold dt config helpers into a single gpio_nand_of_get_config()
> > v4: - get io sync address from gpio-control-nand,io-sync-reg
> > property rather than a resource
> > - clarified a few details in the binding
> > v3: - remove redundant cast and a couple of whitespace/naming
> > changes
> > v2: - add CONFIG_OF guards for non-dt platforms
> > - compatible becomes gpio-control-nand
> > - clarify some binding details
> >
> > Cc: David Woodhouse <dwmw2@infradead.org>
> > Cc: Artem Bityutskiy <dedekind1@gmail.com>
> > Cc: Scott Wood <scottwood@freescale.com>
> > Cc: Grant Likely <grant.likely@secretlab.ca>
> > Signed-off-by: Jamie Iles <jamie@jamieiles.com>
>
> Pushed this patch to l2-mtd-2.6.git, thanks.
>
> P.S. probably it should contain some reviewed-by tags? I can always add
> them, though, if needed.
This patch needs of_read_property_u64() from
http://www.mail-archive.com/devicetree-discuss@lists.ozlabs.org/msg05973.html
which hasn't been merged yet for the CONFIG_OF case so I'm not sure how this
should be handled.
Thanks,
Jamie
WARNING: multiple messages have this Message-ID (diff)
From: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
To: Artem Bityutskiy <dedekind1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Scott Wood <scottwood-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Subject: Re: [PATCHv4] mtd: gpio-nand: add device tree bindings
Date: Sat, 20 Aug 2011 07:38:16 +0100 [thread overview]
Message-ID: <20110820063816.GA18892@gallagher> (raw)
In-Reply-To: <1313811552.4475.10.camel@koala>
Hi Artem,
On Sat, Aug 20, 2011 at 06:39:10AM +0300, Artem Bityutskiy wrote:
> On Mon, 2011-08-15 at 16:24 +0100, Jamie Iles wrote:
> > From: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
> > Subject: [PATCH] mtd: gpio-nand: add device tree bindings
> >
> > Add device tree bindings so that the gpio-nand driver may be
> > instantiated from the device tree. This also allows the partitions
> > to be specified in the device tree.
> >
> > v5: - fold dt config helpers into a single gpio_nand_of_get_config()
> > v4: - get io sync address from gpio-control-nand,io-sync-reg
> > property rather than a resource
> > - clarified a few details in the binding
> > v3: - remove redundant cast and a couple of whitespace/naming
> > changes
> > v2: - add CONFIG_OF guards for non-dt platforms
> > - compatible becomes gpio-control-nand
> > - clarify some binding details
> >
> > Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
> > Cc: Artem Bityutskiy <dedekind1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Cc: Scott Wood <scottwood-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> > Signed-off-by: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
>
> Pushed this patch to l2-mtd-2.6.git, thanks.
>
> P.S. probably it should contain some reviewed-by tags? I can always add
> them, though, if needed.
This patch needs of_read_property_u64() from
http://www.mail-archive.com/devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org/msg05973.html
which hasn't been merged yet for the CONFIG_OF case so I'm not sure how this
should be handled.
Thanks,
Jamie
next prev parent reply other threads:[~2011-08-20 6:38 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-09 15:12 [PATCHv4] mtd: gpio-nand: add device tree bindings Jamie Iles
2011-08-09 15:12 ` Jamie Iles
2011-08-10 15:13 ` Scott Wood
2011-08-10 15:13 ` Scott Wood
2011-08-11 9:00 ` Jamie Iles
2011-08-11 9:00 ` Jamie Iles
2011-08-15 13:57 ` Artem Bityutskiy
2011-08-15 13:57 ` Artem Bityutskiy
2011-08-15 13:58 ` Jamie Iles
2011-08-15 13:58 ` Jamie Iles
2011-08-15 14:28 ` Artem Bityutskiy
2011-08-15 14:28 ` Artem Bityutskiy
2011-08-15 14:38 ` Jamie Iles
2011-08-15 14:38 ` Jamie Iles
2011-08-15 14:45 ` Artem Bityutskiy
2011-08-15 14:45 ` Artem Bityutskiy
2011-08-15 15:24 ` Jamie Iles
2011-08-15 15:24 ` Jamie Iles
2011-08-19 19:51 ` Artem Bityutskiy
2011-08-19 19:51 ` Artem Bityutskiy
2011-08-19 21:18 ` Jamie Iles
2011-08-19 21:18 ` Jamie Iles
2011-08-20 3:39 ` Artem Bityutskiy
2011-08-20 3:39 ` Artem Bityutskiy
2011-08-20 6:38 ` Jamie Iles [this message]
2011-08-20 6:38 ` Jamie Iles
2011-08-20 12:09 ` Artem Bityutskiy
2011-08-20 12:09 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110820063816.GA18892@gallagher \
--to=jamie@jamieiles.com \
--cc=dedekind1@gmail.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dwmw2@infradead.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-mtd@lists.infradead.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.