From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>,
alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH 2/2] ASoC: wm9081: Use snd_soc_update_bits for read-modify-write
Date: Mon, 17 Oct 2011 12:36:52 +0800 [thread overview]
Message-ID: <1318826212.12989.2.camel@phoenix> (raw)
In-Reply-To: <1318826071.12989.0.camel@phoenix>
Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
sound/soc/codecs/wm9081.c | 81 +++++++++++++++++++--------------------------
1 files changed, 34 insertions(+), 47 deletions(-)
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 66092ef..f4fc03b 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -766,84 +766,72 @@ static const struct snd_soc_dapm_route wm9081_audio_paths[] = {
static int wm9081_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg;
-
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
/* VMID=2*40k */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg &= ~WM9081_VMID_SEL_MASK;
- reg |= 0x2;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_SEL_MASK, 0x2);
/* Normal bias current */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_STBY_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA, 0);
break;
case SND_SOC_BIAS_STANDBY:
/* Initial cold start */
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
/* Disable LINEOUT discharge */
- reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
- reg &= ~WM9081_LINEOUT_DISCH;
- snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH, 0);
/* Select startup bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA);
/* VMID 2*4k; Soft VMID ramp enable */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg |= WM9081_VMID_RAMP | 0x6;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
-
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | 0x6,
+ WM9081_VMID_RAMP | 0x6);
mdelay(100);
/* Normal bias enable & soft start off */
- reg |= WM9081_BIAS_ENA;
- reg &= ~WM9081_VMID_RAMP;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | WM9081_BIAS_ENA,
+ WM9081_BIAS_ENA);
/* Standard bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_BIAS_SRC;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC, 0);
}
/* VMID 2*240k */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_VMID_SEL_MASK;
- reg |= 0x04;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_VMID_SEL_MASK, 0x04);
/* Standby bias current on */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_STBY_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA,
+ WM9081_STBY_BIAS_ENA);
break;
case SND_SOC_BIAS_OFF:
/* Startup bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_BIAS_SRC;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC, WM9081_BIAS_SRC);
/* Disable VMID and biases with soft ramping */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
- reg |= WM9081_VMID_RAMP;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | WM9081_VMID_SEL_MASK |
+ WM9081_BIAS_ENA, WM9081_VMID_RAMP);
/* Actively discharge LINEOUT */
- reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
- reg |= WM9081_LINEOUT_DISCH;
- snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH,
+ WM9081_LINEOUT_DISCH);
break;
}
@@ -1242,11 +1230,10 @@ static int wm9081_probe(struct snd_soc_codec *codec)
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Enable zero cross by default */
- reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT);
- snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
- reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
- snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
- reg | WM9081_SPKPGAZC);
+ snd_soc_update_bits(codec, WM9081_ANALOGUE_LINEOUT,
+ WM9081_LINEOUTZC, WM9081_LINEOUTZC);
+ snd_soc_update_bits(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+ WM9081_SPKPGAZC, WM9081_SPKPGAZC);
snd_soc_add_controls(codec, wm9081_snd_controls,
ARRAY_SIZE(wm9081_snd_controls));
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Dimitris Papastamos <dp@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>,
alsa-devel@alsa-project.org
Subject: [PATCH 2/2] ASoC: wm9081: Use snd_soc_update_bits for read-modify-write
Date: Mon, 17 Oct 2011 12:36:52 +0800 [thread overview]
Message-ID: <1318826212.12989.2.camel@phoenix> (raw)
In-Reply-To: <1318826071.12989.0.camel@phoenix>
Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
sound/soc/codecs/wm9081.c | 81 +++++++++++++++++++--------------------------
1 files changed, 34 insertions(+), 47 deletions(-)
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 66092ef..f4fc03b 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -766,84 +766,72 @@ static const struct snd_soc_dapm_route wm9081_audio_paths[] = {
static int wm9081_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg;
-
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
/* VMID=2*40k */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg &= ~WM9081_VMID_SEL_MASK;
- reg |= 0x2;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_SEL_MASK, 0x2);
/* Normal bias current */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_STBY_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA, 0);
break;
case SND_SOC_BIAS_STANDBY:
/* Initial cold start */
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
/* Disable LINEOUT discharge */
- reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
- reg &= ~WM9081_LINEOUT_DISCH;
- snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH, 0);
/* Select startup bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA);
/* VMID 2*4k; Soft VMID ramp enable */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg |= WM9081_VMID_RAMP | 0x6;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
-
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | 0x6,
+ WM9081_VMID_RAMP | 0x6);
mdelay(100);
/* Normal bias enable & soft start off */
- reg |= WM9081_BIAS_ENA;
- reg &= ~WM9081_VMID_RAMP;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | WM9081_BIAS_ENA,
+ WM9081_BIAS_ENA);
/* Standard bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_BIAS_SRC;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC, 0);
}
/* VMID 2*240k */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_VMID_SEL_MASK;
- reg |= 0x04;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_VMID_SEL_MASK, 0x04);
/* Standby bias current on */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_STBY_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA,
+ WM9081_STBY_BIAS_ENA);
break;
case SND_SOC_BIAS_OFF:
/* Startup bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_BIAS_SRC;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC, WM9081_BIAS_SRC);
/* Disable VMID and biases with soft ramping */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
- reg |= WM9081_VMID_RAMP;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | WM9081_VMID_SEL_MASK |
+ WM9081_BIAS_ENA, WM9081_VMID_RAMP);
/* Actively discharge LINEOUT */
- reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
- reg |= WM9081_LINEOUT_DISCH;
- snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH,
+ WM9081_LINEOUT_DISCH);
break;
}
@@ -1242,11 +1230,10 @@ static int wm9081_probe(struct snd_soc_codec *codec)
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Enable zero cross by default */
- reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT);
- snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
- reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
- snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
- reg | WM9081_SPKPGAZC);
+ snd_soc_update_bits(codec, WM9081_ANALOGUE_LINEOUT,
+ WM9081_LINEOUTZC, WM9081_LINEOUTZC);
+ snd_soc_update_bits(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+ WM9081_SPKPGAZC, WM9081_SPKPGAZC);
snd_soc_add_controls(codec, wm9081_snd_controls,
ARRAY_SIZE(wm9081_snd_controls));
--
1.7.4.1
next prev parent reply other threads:[~2011-10-17 4:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-17 4:34 [PATCH 1/2] ASoC: wm9081: Fix setting soft VMID ramp enable with VMID 2*240k Axel Lin
2011-10-17 4:36 ` Axel Lin [this message]
2011-10-17 4:36 ` [PATCH 2/2] ASoC: wm9081: Use snd_soc_update_bits for read-modify-write Axel Lin
2011-10-17 23:25 ` Mark Brown
2011-10-17 23:25 ` Mark Brown
2011-10-18 1:43 ` Axel Lin
2011-10-18 1:43 ` Axel Lin
2011-10-17 23:22 ` [PATCH 1/2] ASoC: wm9081: Fix setting soft VMID ramp enable with VMID 2*240k Mark Brown
2011-10-17 23:22 ` Mark Brown
2011-10-20 1:50 ` Axel Lin
2011-10-20 12:37 ` Mark Brown
2011-10-20 12:37 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318826212.12989.2.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dp@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.