From: Aneesh V <aneesh@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 2/5] armv7: add appropriate headers for assembly functions
Date: Thu, 23 Feb 2012 19:09:42 +0530 [thread overview]
Message-ID: <1330004385-22502-2-git-send-email-aneesh@ti.com> (raw)
In-Reply-To: <1328528248-20872-1-git-send-email-aneesh@ti.com>
Use ENTRY and ENDPROC with assembly functions to ensure
necessary assembler directives for all functions.
Signed-off-by: Aneesh V <aneesh@ti.com>
---
Changes in V2:
- Newly added
---
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 ++-
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 ++-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 ++++----
arch/arm/cpu/armv7/omap-common/reset.S | 5 ++-
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 ++++++++++++-----------
arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +++--
arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 ++-
arch/arm/cpu/armv7/start.S | 13 ++++---
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 ++-
arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +++--
10 files changed, 61 insertions(+), 51 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 01f6d75..5344410 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -22,6 +22,7 @@
#include <config.h>
#include <asm/arch/imx-regs.h>
#include <generated/asm-offsets.h>
+#include <linux/linkage.h>
/*
* L2CC Cache setup/invalidation/disable
@@ -312,8 +313,7 @@
.section ".text.init", "x"
-.globl lowlevel_init
-lowlevel_init:
+ENTRY(lowlevel_init)
#if defined(CONFIG_MX51)
ldr r0, =GPIO1_BASE_ADDR
ldr r1, [r0, #0x0]
@@ -334,6 +334,7 @@ lowlevel_init:
/* r12 saved upper lr*/
mov pc,lr
+ENDPROC(lowlevel_init)
/* Board level setting value */
W_DP_OP_864: .word DP_OP_864
diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/arm/cpu/armv7/mx6/lowlevel_init.S
index 1864356..acadef2 100644
--- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx6/lowlevel_init.S
@@ -18,7 +18,8 @@
*/
.section ".text.init", "x"
-.globl lowlevel_init
-lowlevel_init:
+#include <linux/linkage.h>
+ENTRY(lowlevel_init)
mov pc, lr
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 35f38ac..ccc6bb6 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -27,9 +27,9 @@
*/
#include <asm/arch/omap.h>
+#include <linux/linkage.h>
-.global save_boot_params
-save_boot_params:
+ENTRY(save_boot_params)
/*
* See if the rom code passed pointer is valid:
* It is not valid if it is not in non-secure SRAM
@@ -76,10 +76,9 @@ save_boot_params:
strb r2, [r3, #CH_FLAGS_OFFSET]
1:
bx lr
+ENDPROC(save_boot_params)
-
-.globl lowlevel_init
-lowlevel_init:
+ENTRY(lowlevel_init)
/*
* Setup a temporary stack
*/
@@ -95,12 +94,13 @@ lowlevel_init:
*/
bl s_init
pop {ip, pc}
+ENDPROC(lowlevel_init)
-.globl set_pl310_ctrl_reg
-set_pl310_ctrl_reg:
+ENTRY(set_pl310_ctrl_reg)
PUSH {r4-r11, lr} @ save registers - ROM code may pollute
@ our registers
LDR r12, =0x102 @ Set PL310 control register - value in R0
.word 0xe1600070 @ SMC #0 - hand assembled because -march=armv5
@ call ROM Code API to set control register
POP {r4-r11, pc}
+ENDPROC(set_pl310_ctrl_reg)
diff --git a/arch/arm/cpu/armv7/omap-common/reset.S b/arch/arm/cpu/armv7/omap-common/reset.S
index 838b122..179a476 100644
--- a/arch/arm/cpu/armv7/omap-common/reset.S
+++ b/arch/arm/cpu/armv7/omap-common/reset.S
@@ -22,9 +22,9 @@
*/
#include <config.h>
+#include <linux/linkage.h>
-.global reset_cpu
-reset_cpu:
+ENTRY(reset_cpu)
ldr r1, rstctl @ get addr for global reset
@ reg
ldr r3, rstbit @ sw reset bit
@@ -36,3 +36,4 @@ rstctl:
.word PRM_RSTCTRL
rstbit:
.word PRM_RSTCTRL_RESET
+ENDPROC(reset_cpu)
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index c42c5dd..ebf69fa 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
@@ -31,22 +31,22 @@
#include <version.h>
#include <asm/arch/mem.h>
#include <asm/arch/clocks_omap3.h>
+#include <linux/linkage.h>
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
#ifdef CONFIG_SPL_BUILD
-.global save_boot_params
-save_boot_params:
+ENTRY(save_boot_params)
ldr r4, =omap3_boot_device
ldr r5, [r0, #0x4]
and r5, r5, #0xff
str r5, [r4]
bx lr
+ENDPROC(save_boot_params)
#endif
-.global omap3_gp_romcode_call
-omap3_gp_romcode_call:
+ENTRY(omap3_gp_romcode_call)
PUSH {r4-r12, lr} @ Save all registers from ROM code!
MOV r12, r0 @ Copy the Service ID in R12
MOV r0, r1 @ Copy parameter to R0
@@ -55,6 +55,7 @@ omap3_gp_romcode_call:
.word 0xe1600070 @ SMC #0 to enter monitor - hand assembled
@ because we use -march=armv5
POP {r4-r12, pc}
+ENDPROC(omap3_gp_romcode_call)
/*
* Funtion for making PPA HAL API calls in secure devices
@@ -62,8 +63,7 @@ omap3_gp_romcode_call:
* R0 - Service ID
* R1 - paramer list
*/
-.global do_omap3_emu_romcode_call
-do_omap3_emu_romcode_call:
+ENTRY(do_omap3_emu_romcode_call)
PUSH {r4-r12, lr} @ Save all registers from ROM code!
MOV r12, r0 @ Copy the Secure Service ID in R12
MOV r3, r1 @ Copy the pointer to va_list in R3
@@ -76,14 +76,14 @@ do_omap3_emu_romcode_call:
.word 0xe1600071 @ SMC #1 to call PPA service - hand assembled
@ because we use -march=armv5
POP {r4-r12, pc}
+ENDPROC(do_omap3_emu_romcode_call)
#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT)
/**************************************************************************
* cpy_clk_code: relocates clock code into SRAM where its safer to execute
* R1 = SRAM destination address.
*************************************************************************/
-.global cpy_clk_code
- cpy_clk_code:
+ENTRY(cpy_clk_code)
/* Copy DPLL code into SRAM */
adr r0, go_to_speed /* get addr of clock setting code */
mov r2, #384 /* r2 size to copy (div by 32 bytes) */
@@ -95,6 +95,7 @@ next2:
cmp r0, r2 /* until source end address [r2] */
bne next2
mov pc, lr /* back to caller */
+ENDPROC(cpy_clk_code)
/* ***************************************************************************
* go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
@@ -109,8 +110,7 @@ next2:
* L3 when its not in self refresh seems bad for it. Normally, this
* code runs from flash before SDR is init so that should be ok.
****************************************************************************/
-.global go_to_speed
- go_to_speed:
+ENTRY(go_to_speed)
stmfd sp!, {r4 - r6}
/* move into fast relock bypass */
@@ -171,6 +171,7 @@ wait2:
nop
ldmfd sp!, {r4 - r6}
mov pc, lr /* back to caller, locked */
+ENDPROC(go_to_speed)
_go_to_speed: .word go_to_speed
@@ -211,8 +212,7 @@ pll_div_val5:
#endif
-.globl lowlevel_init
-lowlevel_init:
+ENTRY(lowlevel_init)
ldr sp, SRAM_STACK
str ip, [sp] /* stash old link register */
mov ip, lr /* save link reg across call */
@@ -230,6 +230,7 @@ lowlevel_init:
/* back to arch calling code */
mov pc, lr
+ENDPROC(lowlevel_init)
/* the literal pools origin */
.ltorg
@@ -480,22 +481,22 @@ per_36x_dpll_param:
.word 26000, 432, 12, 9, 16, 9, 4, 3, 1
.word 38400, 360, 15, 9, 16, 5, 4, 3, 1
-.globl get_36x_mpu_dpll_param
-get_36x_mpu_dpll_param:
+ENTRY(get_36x_mpu_dpll_param)
adr r0, mpu_36x_dpll_param
mov pc, lr
+ENDPROC(get_36x_mpu_dpll_param)
-.globl get_36x_iva_dpll_param
-get_36x_iva_dpll_param:
+ENTRY(get_36x_iva_dpll_param)
adr r0, iva_36x_dpll_param
mov pc, lr
+ENDPROC(get_36x_iva_dpll_param)
-.globl get_36x_core_dpll_param
-get_36x_core_dpll_param:
+ENTRY(get_36x_core_dpll_param)
adr r0, core_36x_dpll_param
mov pc, lr
+ENDPROC(get_36x_core_dpll_param)
-.globl get_36x_per_dpll_param
-get_36x_per_dpll_param:
+ENTRY(get_36x_per_dpll_param)
adr r0, per_36x_dpll_param
mov pc, lr
+ENDPROC(get_36x_per_dpll_param)
diff --git a/arch/arm/cpu/armv7/s5pc1xx/cache.S b/arch/arm/cpu/armv7/s5pc1xx/cache.S
index c7d6221..000192c 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/cache.S
+++ b/arch/arm/cpu/armv7/s5pc1xx/cache.S
@@ -25,20 +25,22 @@
.align 5
+#include <linux/linkage.h>
+
#ifndef CONFIG_SYS_L2CACHE_OFF
-.global v7_outer_cache_enable
-v7_outer_cache_enable:
+ENTRY(v7_outer_cache_enable)
push {r0, r1, r2, lr}
mrc 15, 0, r3, cr1, cr0, 1
orr r3, r3, #2
mcr 15, 0, r3, cr1, cr0, 1
pop {r1, r2, r3, pc}
+ENDPROC(v7_outer_cache_enable)
-.global v7_outer_cache_disable
-v7_outer_cache_disable:
+ENTRY(v7_outer_cache_disable)
push {r0, r1, r2, lr}
mrc 15, 0, r3, cr1, cr0, 1
bic r3, r3, #2
mcr 15, 0, r3, cr1, cr0, 1
pop {r1, r2, r3, pc}
+ENDPROC(v7_outer_cache_disable)
#endif
diff --git a/arch/arm/cpu/armv7/s5pc1xx/reset.S b/arch/arm/cpu/armv7/s5pc1xx/reset.S
index 70fa146..c7a41d0 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/reset.S
+++ b/arch/arm/cpu/armv7/s5pc1xx/reset.S
@@ -22,12 +22,12 @@
*/
#include <asm/arch/cpu.h>
+#include <linux/linkage.h>
#define S5PC100_SWRESET 0xE0200000
#define S5PC110_SWRESET 0xE0102000
-.globl reset_cpu
-reset_cpu:
+ENTRY(reset_cpu)
ldr r1, =S5PC100_PRO_ID
ldr r2, [r1]
ldr r4, =0x00010000
@@ -45,3 +45,4 @@ reset_cpu:
str r2, [r1]
_loop_forever:
b _loop_forever
+ENDPROC(reset_cpu)
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index ef08a55..261835b 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -33,6 +33,7 @@
#include <config.h>
#include <version.h>
#include <asm/system.h>
+#include <linux/linkage.h>
.globl _start
_start: b reset
@@ -172,8 +173,7 @@ call_board_init_f:
* after relocating the monitor code.
*
*/
- .globl relocate_code
-relocate_code:
+ENTRY(relocate_code)
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
@@ -289,6 +289,7 @@ jump_2_ram:
_board_init_r_ofs:
.word board_init_r - _start
+ENDPROC(relocate_code)
/*************************************************************************
*
@@ -298,8 +299,7 @@ _board_init_r_ofs:
* CONFIG_SYS_ICACHE_OFF is defined.
*
*************************************************************************/
-.globl cpu_init_cp15
-cpu_init_cp15:
+ENTRY(cpu_init_cp15)
/*
* Invalidate L1 I/D
*/
@@ -325,7 +325,7 @@ cpu_init_cp15:
#endif
mcr p15, 0, r0, c1, c0, 0
mov pc, lr @ back to my caller
-
+ENDPROC(cpu_init_cp15)
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
/*************************************************************************
@@ -336,7 +336,7 @@ cpu_init_cp15:
* setup memory timing
*
*************************************************************************/
-cpu_init_crit:
+ENTRY(cpu_init_crit)
/*
* Jump to board specific initialization...
* The Mask ROM will have already initialized
@@ -347,6 +347,7 @@ cpu_init_crit:
bl lowlevel_init @ go setup pll,mux,memory
mov lr, ip @ restore link
mov pc, lr @ back to my caller
+ENDPROC(cpu_init_crit)
#endif
#ifndef CONFIG_SPL_BUILD
diff --git a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S b/arch/arm/cpu/armv7/tegra2/lowlevel_init.S
index 6b86647..d117f23 100644
--- a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/tegra2/lowlevel_init.S
@@ -25,10 +25,10 @@
#include <config.h>
#include <version.h>
+#include <linux/linkage.h>
.align 5
-.global reset_cpu
-reset_cpu:
+ENTRY(reset_cpu)
ldr r1, rstctl @ get addr for global reset
@ reg
ldr r3, [r1]
@@ -39,3 +39,4 @@ _loop_forever:
b _loop_forever
rstctl:
.word PRM_RSTCTRL
+ENDPROC(reset_cpu)
diff --git a/arch/arm/cpu/armv7/u8500/lowlevel.S b/arch/arm/cpu/armv7/u8500/lowlevel.S
index cffdfd1..289cfb0 100644
--- a/arch/arm/cpu/armv7/u8500/lowlevel.S
+++ b/arch/arm/cpu/armv7/u8500/lowlevel.S
@@ -20,16 +20,17 @@
*/
#include <config.h>
+#include <linux/linkage.h>
-.globl lowlevel_init
-lowlevel_init:
+ENTRY(lowlevel_init)
mov pc, lr
+ENDPROC(lowlevel_init)
.align 5
-.globl reset_cpu
-reset_cpu:
+ENTRY(reset_cpu)
ldr r0, =CFG_PRCMU_BASE
ldr r1, =0x1
str r1, [r0, #0x228]
_loop_forever:
b _loop_forever
+ENDPROC(reset_cpu)
--
1.7.1
next prev parent reply other threads:[~2012-02-23 13:39 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-06 11:37 [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-06 18:45 ` Tom Rini
2012-02-07 7:43 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with " Aneesh V
2012-02-06 21:06 ` Albert ARIBAUD
2012-02-07 7:49 ` Aneesh V
2012-02-09 8:58 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 3/4] OMAP3+: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-06 12:26 ` [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 13:22 ` Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH " Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions Aneesh V
2012-02-17 11:09 ` Aneesh V
2012-02-18 10:13 ` Albert ARIBAUD
2012-02-18 13:24 ` Aneesh V
2012-02-18 15:04 ` Albert ARIBAUD
2012-02-18 16:34 ` Aneesh V
2012-02-18 16:48 ` Albert ARIBAUD
2012-02-20 16:08 ` Aneesh V
2012-02-23 11:06 ` Aneesh V
2012-02-17 17:13 ` Mike Frysinger
2012-02-18 11:12 ` Aneesh V
2012-02-18 11:34 ` Albert ARIBAUD
2012-02-18 22:03 ` Simon Glass
2012-02-19 7:15 ` Mike Frysinger
2012-02-20 20:07 ` Tom Rini
2012-02-20 21:53 ` Simon Glass
2012-02-21 4:19 ` Mike Frysinger
2012-02-21 4:44 ` Simon Glass
2012-02-21 14:33 ` Tom Rini
2012-02-21 15:42 ` Mike Frysinger
2012-02-21 18:03 ` Aneesh V
2012-02-21 19:28 ` Mike Frysinger
2012-02-21 20:01 ` Aneesh V
2012-02-21 4:18 ` Mike Frysinger
2012-02-15 13:57 ` [U-Boot] [PATCH 3/4] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 1/5] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:01 ` Aneesh V
2012-02-23 13:39 ` Aneesh V [this message]
2012-02-23 13:39 ` [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build Aneesh V
2012-02-23 14:57 ` Mike Frysinger
2012-02-23 17:28 ` Aneesh V
2012-02-23 17:34 ` Tom Rini
2012-02-23 17:49 ` Aneesh V
2012-02-23 17:51 ` Tom Rini
2012-02-23 18:09 ` Aneesh V
2012-02-23 18:13 ` Aneesh V
2012-02-23 18:05 ` Mike Frysinger
2012-02-23 18:04 ` Mike Frysinger
2012-02-23 18:12 ` Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 4/5] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 5/5] OMAP4: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 15:24 ` Tom Rini
2012-02-23 16:57 ` Mike Frysinger
2012-02-23 17:40 ` Aneesh V
2012-02-23 23:52 ` Mike Frysinger
2012-02-24 10:30 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 14:06 ` [U-Boot] [PATCH v3 3/6] ARM: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 15:05 ` Mike Frysinger
2012-02-23 17:50 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-02-23 14:21 ` Tom Rini
2012-02-23 14:56 ` Aneesh V
2012-02-23 15:03 ` Mike Frysinger
2012-02-23 15:03 ` Mike Frysinger
2012-02-23 15:42 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 6/6] OMAP4: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-03-08 17:14 ` Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 3/6] ARM: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 6/6] OMAP4: enable Thumb build Aneesh V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330004385-22502-2-git-send-email-aneesh@ti.com \
--to=aneesh@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.