From: Aneesh V <aneesh@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Date: Thu, 23 Feb 2012 23:39:43 +0530 [thread overview]
Message-ID: <4F4680E7.8050603@ti.com> (raw)
In-Reply-To: <20120223175118.GA29246@bill-the-cat>
On Thursday 23 February 2012 11:21 PM, Tom Rini wrote:
> On Thu, Feb 23, 2012 at 11:19:59PM +0530, Aneesh V wrote:
>> On Thursday 23 February 2012 11:04 PM, Tom Rini wrote:
>>> On Thu, Feb 23, 2012 at 10:58:36PM +0530, Aneesh V wrote:
>>>> On Thursday 23 February 2012 08:27 PM, Mike Frysinger wrote:
>>>>> On Thursday 23 February 2012 08:39:43 Aneesh V wrote:
>>>>>> --- a/arch/arm/config.mk
>>>>>> +++ b/arch/arm/config.mk
>>>>>>
>>>>>> -# Explicitly specifiy 32-bit ARM ISA since toolchain default can be
>>>>>> -mthumb: +# Choose between ARM/Thumb instruction sets
>>>>>> +ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
>>>>>> +PF_CPPFLAGS_ARM := $(call cc-option, -mthumb -mthumb-interwork,\
>>>>>> + $(call cc-option,-marm,)\
>>>>>> + $(call cc-option,-mno-thumb-interwork,)\
>>>>>> + )
>>>>>> +else
>>>>>> PF_CPPFLAGS_ARM := $(call cc-option,-marm,)
>>>>>> +PF_CPPFLAGS_ARM += $(call cc-option,-mno-thumb-interwork,)
>>>>>
>>>>> this 2nd part is no good. "+=" is not the same thing as ":=".
>>>>
>>>> I don't understand the difference. '+=' is done after ':=' right?
>>>
>>> '+=' is evaluated every file we build, ':=' is evaluated once. We use
>>> the latter to keep build times down.
>>>
>>
>> Ok. so, are we trying to reduce the number of "+=", right?
>
> Yes, it should already be at or near 0 uses.
We need at least one for finally appending to the exported variable,
right. So, looks like one += for adding '-mthumb -mthumb-interwork'
together is better than having one each for the two options? Is that
the logic?
next prev parent reply other threads:[~2012-02-23 18:09 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-06 11:37 [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-06 18:45 ` Tom Rini
2012-02-07 7:43 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with " Aneesh V
2012-02-06 21:06 ` Albert ARIBAUD
2012-02-07 7:49 ` Aneesh V
2012-02-09 8:58 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 3/4] OMAP3+: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-06 12:26 ` [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 13:22 ` Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH " Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions Aneesh V
2012-02-17 11:09 ` Aneesh V
2012-02-18 10:13 ` Albert ARIBAUD
2012-02-18 13:24 ` Aneesh V
2012-02-18 15:04 ` Albert ARIBAUD
2012-02-18 16:34 ` Aneesh V
2012-02-18 16:48 ` Albert ARIBAUD
2012-02-20 16:08 ` Aneesh V
2012-02-23 11:06 ` Aneesh V
2012-02-17 17:13 ` Mike Frysinger
2012-02-18 11:12 ` Aneesh V
2012-02-18 11:34 ` Albert ARIBAUD
2012-02-18 22:03 ` Simon Glass
2012-02-19 7:15 ` Mike Frysinger
2012-02-20 20:07 ` Tom Rini
2012-02-20 21:53 ` Simon Glass
2012-02-21 4:19 ` Mike Frysinger
2012-02-21 4:44 ` Simon Glass
2012-02-21 14:33 ` Tom Rini
2012-02-21 15:42 ` Mike Frysinger
2012-02-21 18:03 ` Aneesh V
2012-02-21 19:28 ` Mike Frysinger
2012-02-21 20:01 ` Aneesh V
2012-02-21 4:18 ` Mike Frysinger
2012-02-15 13:57 ` [U-Boot] [PATCH 3/4] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 1/5] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:01 ` Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 2/5] armv7: add appropriate headers for assembly functions Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build Aneesh V
2012-02-23 14:57 ` Mike Frysinger
2012-02-23 17:28 ` Aneesh V
2012-02-23 17:34 ` Tom Rini
2012-02-23 17:49 ` Aneesh V
2012-02-23 17:51 ` Tom Rini
2012-02-23 18:09 ` Aneesh V [this message]
2012-02-23 18:13 ` Aneesh V
2012-02-23 18:05 ` Mike Frysinger
2012-02-23 18:04 ` Mike Frysinger
2012-02-23 18:12 ` Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 4/5] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 5/5] OMAP4: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 15:24 ` Tom Rini
2012-02-23 16:57 ` Mike Frysinger
2012-02-23 17:40 ` Aneesh V
2012-02-23 23:52 ` Mike Frysinger
2012-02-24 10:30 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 14:06 ` [U-Boot] [PATCH v3 3/6] ARM: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 15:05 ` Mike Frysinger
2012-02-23 17:50 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-02-23 14:21 ` Tom Rini
2012-02-23 14:56 ` Aneesh V
2012-02-23 15:03 ` Mike Frysinger
2012-02-23 15:03 ` Mike Frysinger
2012-02-23 15:42 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 6/6] OMAP4: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-03-08 17:14 ` Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 3/6] ARM: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 6/6] OMAP4: enable Thumb build Aneesh V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F4680E7.8050603@ti.com \
--to=aneesh@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.