From: Aneesh V <aneesh@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Date: Wed, 22 Feb 2012 01:31:45 +0530 [thread overview]
Message-ID: <4F43F829.1040707@ti.com> (raw)
In-Reply-To: <201202211428.52637.vapier@gentoo.org>
On Wednesday 22 February 2012 12:58 AM, Mike Frysinger wrote:
> On Tuesday 21 February 2012 13:03:55 Aneesh V wrote:
>> I was planning to do that in the next revision of this series. BTW, I
>> guess the following in the arm linkage.h of kernel is useful too. Any
>> thoughts?
>>
>> #define __ALIGN .align 0
>> #define __ALIGN_STR ".align 0"
>
> arm allows unaligned instruction execution ? i would have thought it'd
> require higher alignment than that. i don't think that'd be a good default
> for everyone ...
Unaligned instruction execution - No. ARM instruction should be 4 byte
aligned and Thumb instruction should be 2 byte aligned.
Unaligned data access - to a certain extent yes and is programmable.
IIRC, access to 32 bit integer is possible at 2 byte boundary but not
at an odd address.
Yes, I was also a little puzzled by that one.
next prev parent reply other threads:[~2012-02-21 20:01 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-06 11:37 [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-06 18:45 ` Tom Rini
2012-02-07 7:43 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with " Aneesh V
2012-02-06 21:06 ` Albert ARIBAUD
2012-02-07 7:49 ` Aneesh V
2012-02-09 8:58 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 3/4] OMAP3+: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-06 12:26 ` [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 13:22 ` Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH " Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions Aneesh V
2012-02-17 11:09 ` Aneesh V
2012-02-18 10:13 ` Albert ARIBAUD
2012-02-18 13:24 ` Aneesh V
2012-02-18 15:04 ` Albert ARIBAUD
2012-02-18 16:34 ` Aneesh V
2012-02-18 16:48 ` Albert ARIBAUD
2012-02-20 16:08 ` Aneesh V
2012-02-23 11:06 ` Aneesh V
2012-02-17 17:13 ` Mike Frysinger
2012-02-18 11:12 ` Aneesh V
2012-02-18 11:34 ` Albert ARIBAUD
2012-02-18 22:03 ` Simon Glass
2012-02-19 7:15 ` Mike Frysinger
2012-02-20 20:07 ` Tom Rini
2012-02-20 21:53 ` Simon Glass
2012-02-21 4:19 ` Mike Frysinger
2012-02-21 4:44 ` Simon Glass
2012-02-21 14:33 ` Tom Rini
2012-02-21 15:42 ` Mike Frysinger
2012-02-21 18:03 ` Aneesh V
2012-02-21 19:28 ` Mike Frysinger
2012-02-21 20:01 ` Aneesh V [this message]
2012-02-21 4:18 ` Mike Frysinger
2012-02-15 13:57 ` [U-Boot] [PATCH 3/4] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 1/5] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:01 ` Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 2/5] armv7: add appropriate headers for assembly functions Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build Aneesh V
2012-02-23 14:57 ` Mike Frysinger
2012-02-23 17:28 ` Aneesh V
2012-02-23 17:34 ` Tom Rini
2012-02-23 17:49 ` Aneesh V
2012-02-23 17:51 ` Tom Rini
2012-02-23 18:09 ` Aneesh V
2012-02-23 18:13 ` Aneesh V
2012-02-23 18:05 ` Mike Frysinger
2012-02-23 18:04 ` Mike Frysinger
2012-02-23 18:12 ` Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 4/5] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 5/5] OMAP4: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 15:24 ` Tom Rini
2012-02-23 16:57 ` Mike Frysinger
2012-02-23 17:40 ` Aneesh V
2012-02-23 23:52 ` Mike Frysinger
2012-02-24 10:30 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 14:06 ` [U-Boot] [PATCH v3 3/6] ARM: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 15:05 ` Mike Frysinger
2012-02-23 17:50 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-02-23 14:21 ` Tom Rini
2012-02-23 14:56 ` Aneesh V
2012-02-23 15:03 ` Mike Frysinger
2012-02-23 15:03 ` Mike Frysinger
2012-02-23 15:42 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 6/6] OMAP4: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-03-08 17:14 ` Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 3/6] ARM: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 6/6] OMAP4: enable Thumb build Aneesh V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F43F829.1040707@ti.com \
--to=aneesh@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.