From: Tero Kristo <t-kristo@ti.com>
To: Jon Hunter <jon-hunter@ti.com>
Cc: linux-omap@vger.kernel.org, khilman@ti.com, paul@pwsan.com,
Rajendra Nayak <rnayak@ti.com>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA
Date: Wed, 25 Apr 2012 10:31:13 +0300 [thread overview]
Message-ID: <1335339073.2149.107.camel@sokoban> (raw)
In-Reply-To: <4F96E7E7.9050005@ti.com>
On Tue, 2012-04-24 at 12:50 -0500, Jon Hunter wrote:
> Hi Tero,
>
> On 04/20/2012 04:33 AM, Tero Kristo wrote:
> > From: Santosh Shilimkar <santosh.shilimkar@ti.com>
> >
> > The ROM BUG is when MPU Domain OFF wake up sequence that can compromise
> > IVA and Tesla execution.
> >
> > At wakeup from MPU OFF on HS device only (not GP device), when
> > restoring the Secure RAM, the ROM Code reconfigures the clocks the
> > same way it is done at Cold Reset.
> > The IVAHD Clocks and Power Domain settings are:
> > IVAHD_CM2 IVAHD_CLKCTRL_MODULE_MODE = DISABLE
> > IVAHD_CM2 SL2_CLKCTRL_MODULE_MODE = DISABLE
> > IVAHD_CM2 SL2_CLKSTCTRL_CLKTRCTRL = HW_AUTO
> > IVAHD_PRM IVAHD_PWRSTCTRL_POWERSTATE = OFF
> > The TESLA Clocks and Power Domain settings are:
> > TESLA_CM1 TESLA_CLKCTRL_MODULE_MODE = DISABLE
> > TESLA_CM1 TESLA_CLKSTCTRL_CLKTRCTRL = HW_AUTO
> > TESLA_PRM TESLA_PWRSTCTRL_POWERSTATE = OFF
> >
> > This patch fixes the low power OFF mode code so that the these
> > registers are saved and restore across MPU OFF state.
> >
> > Also because of this limitation, MPU OFF alone is not targeted without
> > device OFF to avoid IVAHD and TESLA execution impact
>
> You may wish to state which devices is impacted by this in the changelog.
Okay.
>
> > Signed-off-by: Rajendra Nayak <rnayak@ti.com>
> > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> > [t-kristo@ti.com: added omap4 pm errata support]
> > Signed-off-by: Tero Kristo <t-kristo@ti.com>
> > ---
> > arch/arm/mach-omap2/omap-mpuss-lowpower.c | 53 +++++++++++++++++++++++++++++
> > arch/arm/mach-omap2/pm.h | 2 +
> > arch/arm/mach-omap2/pm44xx.c | 9 +++++
> > 3 files changed, 64 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> > index b9a2cc7..208d4a4 100644
> > --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> > +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> > @@ -52,6 +52,7 @@
> >
> > #include <plat/omap44xx.h>
> >
> > +#include "iomap.h"
> > #include "common.h"
> > #include "omap4-sar-layout.h"
> > #include "pm.h"
> > @@ -76,6 +77,24 @@ static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
> > static struct powerdomain *mpuss_pd;
> > static void __iomem *sar_base;
> >
> > +struct reg_tuple {
> > + void __iomem *addr;
> > + u32 val;
> > +};
> > +
> > +static struct reg_tuple tesla_reg[] = {
> > + {.addr = OMAP4430_CM_TESLA_CLKSTCTRL},
> > + {.addr = OMAP4430_CM_TESLA_TESLA_CLKCTRL},
> > + {.addr = OMAP4430_PM_TESLA_PWRSTCTRL},
> > +};
> > +
> > +static struct reg_tuple ivahd_reg[] = {
> > + {.addr = OMAP4430_CM_IVAHD_CLKSTCTRL},
> > + {.addr = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL},
> > + {.addr = OMAP4430_CM_IVAHD_SL2_CLKCTRL},
> > + {.addr = OMAP4430_PM_IVAHD_PWRSTCTRL}
> > +};
> > +
> > /*
> > * Program the wakeup routine address for the CPU0 and CPU1
> > * used for OFF or DORMANT wakeup.
> > @@ -215,6 +234,34 @@ static void save_l2x0_context(void)
> > {}
> > #endif
> >
> > +static inline void save_ivahd_tesla_regs(void)
> > +{
> > + int i;
> > +
> > + if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_IVAHD_TESLA_ERRATUM))
> > + return;
> > +
> > + for (i = 0; i < ARRAY_SIZE(tesla_reg); i++)
> > + tesla_reg[i].val = __raw_readl(tesla_reg[i].addr);
> > +
> > + for (i = 0; i < ARRAY_SIZE(ivahd_reg); i++)
> > + ivahd_reg[i].val = __raw_readl(ivahd_reg[i].addr);
> > +}
> > +
> > +static inline void restore_ivahd_tesla_regs(void)
> > +{
> > + int i;
> > +
> > + if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_IVAHD_TESLA_ERRATUM))
> > + return;
> > +
> > + for (i = 0; i < ARRAY_SIZE(tesla_reg); i++)
> > + __raw_writel(tesla_reg[i].val, tesla_reg[i].addr);
> > +
> > + for (i = 0; i < ARRAY_SIZE(ivahd_reg); i++)
> > + __raw_writel(ivahd_reg[i].val, ivahd_reg[i].addr);
> > +}
> > +
> > /**
> > * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
> > * The purpose of this function is to manage low power programming
> > @@ -273,11 +320,14 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
> > omap_sar_overwrite();
> > omap4_cm_prepare_off();
> > omap4_dpll_prepare_off();
> > + save_ivahd_tesla_regs();
> > save_state = 3;
> > } else if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
> > (pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF)) {
> > + save_ivahd_tesla_regs();
> > save_state = 2;
> > } else if (pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_OFF) {
> > + save_ivahd_tesla_regs();
> > save_state = 3;
> > }
> >
> > @@ -302,6 +352,9 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
> > wakeup_cpu = smp_processor_id();
> > set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
> >
> > + if (omap4_mpuss_read_prev_context_state())
> > + restore_ivahd_tesla_regs();
> > +
> > if (omap4_device_prev_state_off()) {
> > omap4_dpll_resume_off();
> > omap4_cm_resume_off();
> > diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> > index e78ec63..051aeb9 100644
> > --- a/arch/arm/mach-omap2/pm.h
> > +++ b/arch/arm/mach-omap2/pm.h
> > @@ -131,6 +131,8 @@ extern void enable_omap3630_toggle_l2_on_restore(void);
> > static inline void enable_omap3630_toggle_l2_on_restore(void) { }
> > #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
> >
> > +#define PM_OMAP4_ROM_IVAHD_TESLA_ERRATUM (1 << 0)
> > +
> > #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
> > extern u16 pm44xx_errata;
> > #define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id))
> > diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
> > index 8238097..67cb799 100644
> > --- a/arch/arm/mach-omap2/pm44xx.c
> > +++ b/arch/arm/mach-omap2/pm44xx.c
> > @@ -263,6 +263,15 @@ static int __init omap4_pm_init(void)
> >
> > (void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
> >
> > + /*
> > + * ROM code initializes IVAHD and TESLA clock registers during
> > + * secure RAM restore phase on omap4430 EMU/HS devices, thus
> > + * IVAHD / TESLA clock registers must be saved / restored
> > + * during MPU OSWR / device off.
> > + */
> > + if (cpu_is_omap443x() && omap_type() != OMAP2_DEVICE_TYPE_GP)
> > + pm44xx_errata |= PM_OMAP4_ROM_IVAHD_TESLA_ERRATUM;
>
> This erratum does not impact omap4430 es2.3 so the above should account
> for that.
Okay, will change that.
-Tero
WARNING: multiple messages have this Message-ID (diff)
From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA
Date: Wed, 25 Apr 2012 10:31:13 +0300 [thread overview]
Message-ID: <1335339073.2149.107.camel@sokoban> (raw)
In-Reply-To: <4F96E7E7.9050005@ti.com>
On Tue, 2012-04-24 at 12:50 -0500, Jon Hunter wrote:
> Hi Tero,
>
> On 04/20/2012 04:33 AM, Tero Kristo wrote:
> > From: Santosh Shilimkar <santosh.shilimkar@ti.com>
> >
> > The ROM BUG is when MPU Domain OFF wake up sequence that can compromise
> > IVA and Tesla execution.
> >
> > At wakeup from MPU OFF on HS device only (not GP device), when
> > restoring the Secure RAM, the ROM Code reconfigures the clocks the
> > same way it is done at Cold Reset.
> > The IVAHD Clocks and Power Domain settings are:
> > IVAHD_CM2 IVAHD_CLKCTRL_MODULE_MODE = DISABLE
> > IVAHD_CM2 SL2_CLKCTRL_MODULE_MODE = DISABLE
> > IVAHD_CM2 SL2_CLKSTCTRL_CLKTRCTRL = HW_AUTO
> > IVAHD_PRM IVAHD_PWRSTCTRL_POWERSTATE = OFF
> > The TESLA Clocks and Power Domain settings are:
> > TESLA_CM1 TESLA_CLKCTRL_MODULE_MODE = DISABLE
> > TESLA_CM1 TESLA_CLKSTCTRL_CLKTRCTRL = HW_AUTO
> > TESLA_PRM TESLA_PWRSTCTRL_POWERSTATE = OFF
> >
> > This patch fixes the low power OFF mode code so that the these
> > registers are saved and restore across MPU OFF state.
> >
> > Also because of this limitation, MPU OFF alone is not targeted without
> > device OFF to avoid IVAHD and TESLA execution impact
>
> You may wish to state which devices is impacted by this in the changelog.
Okay.
>
> > Signed-off-by: Rajendra Nayak <rnayak@ti.com>
> > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> > [t-kristo at ti.com: added omap4 pm errata support]
> > Signed-off-by: Tero Kristo <t-kristo@ti.com>
> > ---
> > arch/arm/mach-omap2/omap-mpuss-lowpower.c | 53 +++++++++++++++++++++++++++++
> > arch/arm/mach-omap2/pm.h | 2 +
> > arch/arm/mach-omap2/pm44xx.c | 9 +++++
> > 3 files changed, 64 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> > index b9a2cc7..208d4a4 100644
> > --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> > +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> > @@ -52,6 +52,7 @@
> >
> > #include <plat/omap44xx.h>
> >
> > +#include "iomap.h"
> > #include "common.h"
> > #include "omap4-sar-layout.h"
> > #include "pm.h"
> > @@ -76,6 +77,24 @@ static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
> > static struct powerdomain *mpuss_pd;
> > static void __iomem *sar_base;
> >
> > +struct reg_tuple {
> > + void __iomem *addr;
> > + u32 val;
> > +};
> > +
> > +static struct reg_tuple tesla_reg[] = {
> > + {.addr = OMAP4430_CM_TESLA_CLKSTCTRL},
> > + {.addr = OMAP4430_CM_TESLA_TESLA_CLKCTRL},
> > + {.addr = OMAP4430_PM_TESLA_PWRSTCTRL},
> > +};
> > +
> > +static struct reg_tuple ivahd_reg[] = {
> > + {.addr = OMAP4430_CM_IVAHD_CLKSTCTRL},
> > + {.addr = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL},
> > + {.addr = OMAP4430_CM_IVAHD_SL2_CLKCTRL},
> > + {.addr = OMAP4430_PM_IVAHD_PWRSTCTRL}
> > +};
> > +
> > /*
> > * Program the wakeup routine address for the CPU0 and CPU1
> > * used for OFF or DORMANT wakeup.
> > @@ -215,6 +234,34 @@ static void save_l2x0_context(void)
> > {}
> > #endif
> >
> > +static inline void save_ivahd_tesla_regs(void)
> > +{
> > + int i;
> > +
> > + if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_IVAHD_TESLA_ERRATUM))
> > + return;
> > +
> > + for (i = 0; i < ARRAY_SIZE(tesla_reg); i++)
> > + tesla_reg[i].val = __raw_readl(tesla_reg[i].addr);
> > +
> > + for (i = 0; i < ARRAY_SIZE(ivahd_reg); i++)
> > + ivahd_reg[i].val = __raw_readl(ivahd_reg[i].addr);
> > +}
> > +
> > +static inline void restore_ivahd_tesla_regs(void)
> > +{
> > + int i;
> > +
> > + if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_IVAHD_TESLA_ERRATUM))
> > + return;
> > +
> > + for (i = 0; i < ARRAY_SIZE(tesla_reg); i++)
> > + __raw_writel(tesla_reg[i].val, tesla_reg[i].addr);
> > +
> > + for (i = 0; i < ARRAY_SIZE(ivahd_reg); i++)
> > + __raw_writel(ivahd_reg[i].val, ivahd_reg[i].addr);
> > +}
> > +
> > /**
> > * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
> > * The purpose of this function is to manage low power programming
> > @@ -273,11 +320,14 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
> > omap_sar_overwrite();
> > omap4_cm_prepare_off();
> > omap4_dpll_prepare_off();
> > + save_ivahd_tesla_regs();
> > save_state = 3;
> > } else if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
> > (pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF)) {
> > + save_ivahd_tesla_regs();
> > save_state = 2;
> > } else if (pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_OFF) {
> > + save_ivahd_tesla_regs();
> > save_state = 3;
> > }
> >
> > @@ -302,6 +352,9 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
> > wakeup_cpu = smp_processor_id();
> > set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
> >
> > + if (omap4_mpuss_read_prev_context_state())
> > + restore_ivahd_tesla_regs();
> > +
> > if (omap4_device_prev_state_off()) {
> > omap4_dpll_resume_off();
> > omap4_cm_resume_off();
> > diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> > index e78ec63..051aeb9 100644
> > --- a/arch/arm/mach-omap2/pm.h
> > +++ b/arch/arm/mach-omap2/pm.h
> > @@ -131,6 +131,8 @@ extern void enable_omap3630_toggle_l2_on_restore(void);
> > static inline void enable_omap3630_toggle_l2_on_restore(void) { }
> > #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
> >
> > +#define PM_OMAP4_ROM_IVAHD_TESLA_ERRATUM (1 << 0)
> > +
> > #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
> > extern u16 pm44xx_errata;
> > #define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id))
> > diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
> > index 8238097..67cb799 100644
> > --- a/arch/arm/mach-omap2/pm44xx.c
> > +++ b/arch/arm/mach-omap2/pm44xx.c
> > @@ -263,6 +263,15 @@ static int __init omap4_pm_init(void)
> >
> > (void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
> >
> > + /*
> > + * ROM code initializes IVAHD and TESLA clock registers during
> > + * secure RAM restore phase on omap4430 EMU/HS devices, thus
> > + * IVAHD / TESLA clock registers must be saved / restored
> > + * during MPU OSWR / device off.
> > + */
> > + if (cpu_is_omap443x() && omap_type() != OMAP2_DEVICE_TYPE_GP)
> > + pm44xx_errata |= PM_OMAP4_ROM_IVAHD_TESLA_ERRATUM;
>
> This erratum does not impact omap4430 es2.3 so the above should account
> for that.
Okay, will change that.
-Tero
next prev parent reply other threads:[~2012-04-25 7:31 UTC|newest]
Thread overview: 126+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-20 9:33 [PATCH 00/19] ARM: OMAP4 device off support Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 01/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-23 16:09 ` Jon Hunter
2012-04-23 16:09 ` Jon Hunter
2012-04-25 7:33 ` Tero Kristo
2012-04-25 7:33 ` Tero Kristo
2012-04-25 15:12 ` Jon Hunter
2012-04-25 15:12 ` Jon Hunter
2012-05-04 19:22 ` Tony Lindgren
2012-05-04 19:22 ` Tony Lindgren
2012-05-02 10:10 ` Bedia, Vaibhav
2012-05-02 10:10 ` Bedia, Vaibhav
2012-05-02 10:18 ` Shilimkar, Santosh
2012-05-02 10:18 ` Shilimkar, Santosh
2012-05-02 10:55 ` Bedia, Vaibhav
2012-05-02 10:55 ` Bedia, Vaibhav
2012-05-02 11:00 ` Shilimkar, Santosh
2012-05-02 11:00 ` Shilimkar, Santosh
2012-05-02 11:40 ` Bedia, Vaibhav
2012-05-02 11:40 ` Bedia, Vaibhav
2012-05-02 11:46 ` Shilimkar, Santosh
2012-05-02 11:46 ` Shilimkar, Santosh
2012-05-02 11:55 ` Bedia, Vaibhav
2012-05-02 11:55 ` Bedia, Vaibhav
2012-05-02 11:47 ` Menon, Nishanth
2012-05-02 11:47 ` Menon, Nishanth
2012-05-02 11:55 ` Bedia, Vaibhav
2012-05-02 11:55 ` Bedia, Vaibhav
2012-05-02 11:58 ` Shilimkar, Santosh
2012-05-02 11:58 ` Shilimkar, Santosh
2012-05-02 12:10 ` Bedia, Vaibhav
2012-05-02 12:10 ` Bedia, Vaibhav
2012-04-20 9:33 ` [PATCH 02/19] ARM: OMAP4: PM: save/restore all CM1/2 " Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-05-09 23:27 ` Kevin Hilman
2012-05-09 23:27 ` Kevin Hilman
2012-05-11 14:30 ` Tero Kristo
2012-05-11 14:30 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 03/19] ARM: OMAP4: PM: powerdomain: Add HWSAR flag to L3INIT Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 04/19] ARM: OMAP4: Add SAR ROM base address Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 05/19] ARM: OMAP4: PM: Add SAR backup support towards device OFF Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-24 16:35 ` Tony Lindgren
2012-04-24 16:35 ` Tony Lindgren
2012-04-25 7:18 ` Tero Kristo
2012-04-25 7:18 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 06/19] ARM: OMAP4: Auto generate SAR layout contents Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-24 16:37 ` Tony Lindgren
2012-04-24 16:37 ` Tony Lindgren
2012-04-20 9:33 ` [PATCH 07/19] ARM: OMAP4: SAR: generate overwrite data based on SAR ROM contents Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 08/19] ARM: OMAP4: PM: Add device-off support Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-24 17:46 ` Jon Hunter
2012-04-24 17:46 ` Jon Hunter
2012-04-25 7:30 ` Tero Kristo
2012-04-25 7:30 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 09/19] ARM: OMAP4: PM: add errata support Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-24 17:50 ` Jon Hunter
2012-04-24 17:50 ` Jon Hunter
2012-04-25 7:31 ` Tero Kristo [this message]
2012-04-25 7:31 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 11/19] ARM: OMAP4: PM: save/restore CM L3INSTR registers when MPU hits OSWR/OFF mode Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-24 17:57 ` Jon Hunter
2012-04-24 17:57 ` Jon Hunter
2012-04-25 7:31 ` Tero Kristo
2012-04-25 7:31 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 12/19] ARM: OMAP4: PM: update ROM return address for OSWR and OFF Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-24 16:39 ` Tony Lindgren
2012-04-24 16:39 ` Tony Lindgren
2012-04-25 7:24 ` Tero Kristo
2012-04-25 7:24 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 13/19] ARM: OMAP4: PM: Mark the PPI and SPI interrupts as non-secure for GP Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 15/19] ARM: OMAP4430: PM: workaround for DDR corruption on second CS Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-24 18:22 ` Jon Hunter
2012-04-24 18:22 ` Jon Hunter
2012-04-25 7:26 ` Tero Kristo
2012-04-25 7:26 ` Tero Kristo
2012-04-25 7:59 ` Shilimkar, Santosh
2012-04-25 7:59 ` Shilimkar, Santosh
2012-04-25 15:16 ` Jon Hunter
2012-04-25 15:16 ` Jon Hunter
2012-04-26 6:19 ` Shilimkar, Santosh
2012-04-26 6:19 ` Shilimkar, Santosh
2012-04-20 9:33 ` [PATCH 16/19] TEMP: ARM: OMAP4: prevent voltage transitions Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 17/19] ARM: OMAP4: put cpu1 back to sleep if no wake request Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 18/19] ARM: OMAP4460: wakeupgen: set GIC_CPU0 backup status flag always Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 9:33 ` [PATCH 19/19] ARM: OMAP4: powerdomain: update mpu / core off counters during device off Tero Kristo
2012-04-20 9:33 ` Tero Kristo
2012-04-20 12:20 ` [PATCH 00/19] ARM: OMAP4 device off support T Krishnamoorthy, Balaji
2012-04-20 12:20 ` T Krishnamoorthy, Balaji
2012-04-20 12:58 ` Tero Kristo
2012-04-20 12:58 ` Tero Kristo
2012-04-20 13:55 ` Kevin Hilman
2012-04-20 13:55 ` Kevin Hilman
2012-04-20 14:43 ` Tero Kristo
2012-04-20 14:43 ` Tero Kristo
2012-04-20 14:51 ` Datta, Shubhrajyoti
2012-04-20 14:51 ` Datta, Shubhrajyoti
2012-04-20 15:07 ` Tero Kristo
2012-04-20 15:07 ` Tero Kristo
2012-04-23 6:28 ` Shubhrajyoti Datta
2012-04-23 6:28 ` Shubhrajyoti Datta
2012-05-09 22:46 ` Kevin Hilman
2012-05-09 22:46 ` Kevin Hilman
2012-05-09 23:14 ` Russell King - ARM Linux
2012-05-09 23:14 ` Russell King - ARM Linux
2012-05-10 9:47 ` Tero Kristo
2012-05-10 9:47 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335339073.2149.107.camel@sokoban \
--to=t-kristo@ti.com \
--cc=jon-hunter@ti.com \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=santosh.shilimkar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.