From: Bob Liu <lliubbo@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 13/16] Blackfin: Bf60x: add hw watchdog support
Date: Tue, 7 Aug 2012 16:07:52 +0800 [thread overview]
Message-ID: <1344326875-348-13-git-send-email-lliubbo@gmail.com> (raw)
In-Reply-To: <1344326875-348-1-git-send-email-lliubbo@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
---
arch/blackfin/cpu/initcode.c | 14 ++++++++++++++
arch/blackfin/cpu/start.S | 2 ++
include/configs/bf609-ezkit.h | 1 +
3 files changed, 17 insertions(+)
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c
index 3197c40..c68302f 100644
--- a/arch/blackfin/cpu/initcode.c
+++ b/arch/blackfin/cpu/initcode.c
@@ -458,8 +458,22 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB)
*/
if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) {
serial_putc('e');
+#ifdef __ADSPBF60x__
+ int i;
+ bfin_write_SEC_GCTL(0x2);
+ while (i++ < 100000);
+ bfin_write_SEC_FCTL(0xc1);
+ bfin_write_SEC_SCTL(2, bfin_read_SEC_SCTL(2) | 0x6);
+
+ bfin_write_SEC_CCTL(0x2);
+ while (i++ < 100000);
+ bfin_write_SEC_GCTL(0x1);
+ bfin_write_SEC_CCTL(0x1);
+#endif
bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE));
+#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART
bfin_write_WDOG_CTL(0);
+#endif
serial_putc('f');
}
#endif
diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S
index 90b4d1a..7155fc8 100644
--- a/arch/blackfin/cpu/start.S
+++ b/arch/blackfin/cpu/start.S
@@ -65,6 +65,7 @@ ENTRY(_start)
p5.h = HI(COREMMR_BASE);
#ifdef CONFIG_HW_WATCHDOG
+#ifndef __ADSPBF60x__
# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START
# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000
# endif
@@ -78,6 +79,7 @@ ENTRY(_start)
/* fire up the watchdog - R0.L above needs to be 0x0000 */
W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0;
#endif
+#endif
/* Turn on the serial for debugging the init process */
serial_early_init
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
index 311b2e4..64b1eb6 100644
--- a/include/configs/bf609-ezkit.h
+++ b/include/configs/bf609-ezkit.h
@@ -78,6 +78,7 @@
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
+#define CONFIG_HW_WATCHDOG
/*
* Network Settings
*/
--
1.7.9.5
next prev parent reply other threads:[~2012-08-07 8:07 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 8:07 [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 02/16] Blackfin: bf609-ezkit: new board port Bob Liu
2012-08-08 4:41 ` Mike Frysinger
2012-08-20 7:55 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page Bob Liu
2012-08-08 4:48 ` Mike Frysinger
2012-08-20 8:00 ` Bob Liu
2012-08-23 3:49 ` Mike Frysinger
2012-08-07 8:07 ` [U-Boot] [PATCH 04/16] Blackfin: Rsi: add support for bf609-ezkit Bob Liu
2012-08-08 4:52 ` Mike Frysinger
2012-08-20 8:01 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 05/16] Blackfin: Paraflash: " Bob Liu
2012-08-08 4:55 ` Mike Frysinger
2012-08-20 8:01 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch Bob Liu
2012-08-08 4:59 ` Mike Frysinger
2012-08-20 8:11 ` Bob Liu
2012-08-23 3:53 ` Mike Frysinger
2012-08-07 8:07 ` [U-Boot] [PATCH 07/16] Blackfin: Spi: add bf6xx spi driver Bob Liu
2012-08-08 5:02 ` Mike Frysinger
2012-08-20 8:11 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 08/16] Blackfin: add more print info for Bf60x Bob Liu
2012-08-08 5:04 ` Mike Frysinger
2012-08-20 8:12 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 09/16] Blackfin: Bf60x: add reset support Bob Liu
2012-08-08 5:05 ` Mike Frysinger
2012-08-20 8:13 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 10/16] Blackfin: Bf60x: Check card ready for each RSI command Bob Liu
2012-08-08 5:05 ` Mike Frysinger
2012-08-20 8:13 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 11/16] Blackfin: Bf60x: support clock init Bob Liu
2012-08-08 5:06 ` Mike Frysinger
2012-08-07 8:07 ` [U-Boot] [PATCH 12/16] Blackfin: Bf60x: initcode: set up uart baud properly Bob Liu
2012-08-08 5:06 ` Mike Frysinger
2012-08-07 8:07 ` Bob Liu [this message]
2012-08-08 5:11 ` [U-Boot] [PATCH 13/16] Blackfin: Bf60x: add hw watchdog support Mike Frysinger
2012-08-20 8:25 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 14/16] Blackfin: setup SMC if user desires it Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 15/16] Blackfin: Bf60x: add resume from hibernate Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 16/16] Blackfin: update license to Clear BSD license Bob Liu
2012-08-08 5:12 ` Mike Frysinger
2012-08-20 8:25 ` Bob Liu
2012-08-08 4:39 ` [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port Mike Frysinger
2012-08-20 7:54 ` Bob Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344326875-348-13-git-send-email-lliubbo@gmail.com \
--to=lliubbo@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.