From: Mike Frysinger <vapier@gentoo.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 05/16] Blackfin: Paraflash: add support for bf609-ezkit
Date: Wed, 8 Aug 2012 00:55:05 -0400 [thread overview]
Message-ID: <201208080055.06372.vapier@gentoo.org> (raw)
In-Reply-To: <1344326875-348-5-git-send-email-lliubbo@gmail.com>
On Tuesday 07 August 2012 04:07:44 Bob Liu wrote:
> --- a/arch/blackfin/include/asm/mach-bf609/portmux.h
> +++ b/arch/blackfin/include/asm/mach-bf609/portmux.h
this should be part of the initial commit of this header (one of the initial
bf60x support patches)
> --- a/board/bf609-ezkit/bf609-ezkit.c
> +++ b/board/bf609-ezkit/bf609-ezkit.c
> --- a/include/configs/bf609-ezkit.h
> +++ b/include/configs/bf609-ezkit.h
then squash these into the initial bf609-ezkit board patch
> --- a/include/configs/bfin_adi_common.h
> +++ b/include/configs/bfin_adi_common.h
> @@ -195,10 +195,12 @@
> "nand erase 0 0x40000;" \
> "nand write $(loadaddr) 0 0x40000"
> # else
> -# define UBOOT_ENV_UPDATE \
> +# ifndef UBOOT_ENV_UPDATE
> +# define UBOOT_ENV_UPDATE \
> "protect off 0x20000000 +$(filesize);" \
> "erase 0x20000000 +$(filesize);" \
> "cp.b $(loadaddr) 0x20000000 $(filesize)"
> +# endif
> # endif
> # ifdef CONFIG_NETCONSOLE
> # define NETCONSOLE_ENV \
replace the 0x20000000 with a define and then there's no need to override it
# define UBOOT_ENV_UPDATE \
"protect off " MK_STR(CONFIG_SYS_FLASH_BASE) " +$(filesize);" \
"erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +$(filesize);" \
"cp.b $(loadaddr) " MK_STR(CONFIG_SYS_FLASH_BASE) " $(filesize)"
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120808/70de63aa/attachment.pgp>
next prev parent reply other threads:[~2012-08-08 4:55 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 8:07 [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 02/16] Blackfin: bf609-ezkit: new board port Bob Liu
2012-08-08 4:41 ` Mike Frysinger
2012-08-20 7:55 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 03/16] Blackfin: Bf60x: support big cplb page Bob Liu
2012-08-08 4:48 ` Mike Frysinger
2012-08-20 8:00 ` Bob Liu
2012-08-23 3:49 ` Mike Frysinger
2012-08-07 8:07 ` [U-Boot] [PATCH 04/16] Blackfin: Rsi: add support for bf609-ezkit Bob Liu
2012-08-08 4:52 ` Mike Frysinger
2012-08-20 8:01 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 05/16] Blackfin: Paraflash: " Bob Liu
2012-08-08 4:55 ` Mike Frysinger [this message]
2012-08-20 8:01 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 06/16] Blackfin: Bf609-ezkit: implement soft switch Bob Liu
2012-08-08 4:59 ` Mike Frysinger
2012-08-20 8:11 ` Bob Liu
2012-08-23 3:53 ` Mike Frysinger
2012-08-07 8:07 ` [U-Boot] [PATCH 07/16] Blackfin: Spi: add bf6xx spi driver Bob Liu
2012-08-08 5:02 ` Mike Frysinger
2012-08-20 8:11 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 08/16] Blackfin: add more print info for Bf60x Bob Liu
2012-08-08 5:04 ` Mike Frysinger
2012-08-20 8:12 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 09/16] Blackfin: Bf60x: add reset support Bob Liu
2012-08-08 5:05 ` Mike Frysinger
2012-08-20 8:13 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 10/16] Blackfin: Bf60x: Check card ready for each RSI command Bob Liu
2012-08-08 5:05 ` Mike Frysinger
2012-08-20 8:13 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 11/16] Blackfin: Bf60x: support clock init Bob Liu
2012-08-08 5:06 ` Mike Frysinger
2012-08-07 8:07 ` [U-Boot] [PATCH 12/16] Blackfin: Bf60x: initcode: set up uart baud properly Bob Liu
2012-08-08 5:06 ` Mike Frysinger
2012-08-07 8:07 ` [U-Boot] [PATCH 13/16] Blackfin: Bf60x: add hw watchdog support Bob Liu
2012-08-08 5:11 ` Mike Frysinger
2012-08-20 8:25 ` Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 14/16] Blackfin: setup SMC if user desires it Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 15/16] Blackfin: Bf60x: add resume from hibernate Bob Liu
2012-08-07 8:07 ` [U-Boot] [PATCH 16/16] Blackfin: update license to Clear BSD license Bob Liu
2012-08-08 5:12 ` Mike Frysinger
2012-08-20 8:25 ` Bob Liu
2012-08-08 4:39 ` [U-Boot] [PATCH 01/16] Blackfin: BF60x: new processor port Mike Frysinger
2012-08-20 7:54 ` Bob Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201208080055.06372.vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.