All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jia Liu <proljc@gmail.com>
To: qemu-devel@nongnu.org
Cc: aurelien@aurel32.net
Subject: [Qemu-devel] [PATCH v9 02/14] target-mips-ase-dsp: Add dsp resources access check
Date: Thu, 27 Sep 2012 21:24:39 +0800	[thread overview]
Message-ID: <1348752291-6041-3-git-send-email-proljc@gmail.com> (raw)
In-Reply-To: <1348752291-6041-1-git-send-email-proljc@gmail.com>

Add MIPS ASE DSP resources access check.

Signed-off-by: Jia Liu <proljc@gmail.com>
---
 linux-user/main.c       |    6 ++++++
 target-mips/cpu.h       |   27 +++++++++++++++++++++++++--
 target-mips/helper.c    |    3 +++
 target-mips/translate.c |   23 +++++++++++++++++++++++
 4 files changed, 57 insertions(+), 2 deletions(-)

diff --git a/linux-user/main.c b/linux-user/main.c
index 9f3476b..cd6523b 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -2281,6 +2281,12 @@ done_syscall:
                 queue_signal(env, info.si_signo, &info);
             }
             break;
+        case EXCP_DSPDIS:
+            info.si_signo = TARGET_SIGILL;
+            info.si_errno = 0;
+            info.si_code = TARGET_ILL_ILLOPC;
+            queue_signal(env, info.si_signo, &info);
+            break;
         default:
             //        error:
             fprintf(stderr, "qemu: unhandled CPU exception 0x%x - aborting\n",
diff --git a/target-mips/cpu.h b/target-mips/cpu.h
index b7a5112..7d46603 100644
--- a/target-mips/cpu.h
+++ b/target-mips/cpu.h
@@ -415,7 +415,7 @@ struct CPUMIPSState {
     int error_code;
     uint32_t hflags;    /* CPU State */
     /* TMASK defines different execution modes */
-#define MIPS_HFLAG_TMASK  0x007FF
+#define MIPS_HFLAG_TMASK  0xC07FF
 #define MIPS_HFLAG_MODE   0x00007 /* execution modes                    */
     /* The KSU flags must be the lowest bits in hflags. The flag order
        must be the same as defined for CP0 Status. This allows to use
@@ -453,6 +453,9 @@ struct CPUMIPSState {
 #define MIPS_HFLAG_BDS32  0x10000 /* branch requires 32-bit delay slot  */
 #define MIPS_HFLAG_BX     0x20000 /* branch exchanges execution mode    */
 #define MIPS_HFLAG_BMASK  (MIPS_HFLAG_BMASK_BASE | MIPS_HFLAG_BMASK_EXT)
+    /* MIPS DSP resources access. */
+#define MIPS_HFLAG_DSP   0x40000  /* Enable access to MIPS DSP resources. */
+#define MIPS_HFLAG_DSPR2 0x80000  /* Enable access to MIPS DSPR2 resources. */
     target_ulong btarget;        /* Jump / branch target               */
     target_ulong bcond;          /* Branch condition (if needed)       */
 
@@ -610,8 +613,9 @@ enum {
     EXCP_MDMX,
     EXCP_C2E,
     EXCP_CACHE, /* 32 */
+    EXCP_DSPDIS,
 
-    EXCP_LAST = EXCP_CACHE,
+    EXCP_LAST = EXCP_DSPDIS,
 };
 /* Dummy exception for conditional stores.  */
 #define EXCP_SC 0x100
@@ -772,6 +776,25 @@ static inline void compute_hflags(CPUMIPSState *env)
     if (env->CP0_Status & (1 << CP0St_FR)) {
         env->hflags |= MIPS_HFLAG_F64;
     }
+    if (env->insn_flags & ASE_DSPR2) {
+        /* Enables access MIPS DSP resources
+           on processors implementing one of these ASEs. If the MIPS DSP ASE is
+           not implemented, this bit must be ignored on write and read as
+           zero. */
+        if (env->CP0_Status & (1 << CP0St_MX)) {
+            env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2;
+        }
+
+    } else if (env->insn_flags & ASE_DSP) {
+        /* Enables access MIPS DSP resources
+           on processors implementing one of these ASEs. If the MIPS DSP ASE is
+           not implemented, this bit must be ignored on write and read as
+           zero. */
+        if (env->CP0_Status & (1 << CP0St_MX)) {
+            env->hflags |= MIPS_HFLAG_DSP;
+        }
+
+    }
     if (env->insn_flags & ISA_MIPS32R2) {
         if (env->active_fpu.fcr0 & (1 << FCR0_F64)) {
             env->hflags |= MIPS_HFLAG_COP1X;
diff --git a/target-mips/helper.c b/target-mips/helper.c
index 4208bb2..edbe2b0 100644
--- a/target-mips/helper.c
+++ b/target-mips/helper.c
@@ -592,6 +592,9 @@ void do_interrupt (CPUMIPSState *env)
     case EXCP_THREAD:
         cause = 25;
         goto set_EPC;
+    case EXCP_DSPDIS:
+        cause = 26;
+        goto set_EPC;
     case EXCP_CACHE:
         cause = 30;
         if (env->CP0_Status & (1 << CP0St_BEV)) {
diff --git a/target-mips/translate.c b/target-mips/translate.c
index fa79d49..b724d24 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -942,6 +942,24 @@ static inline void check_cp1_registers(DisasContext *ctx, int regs)
         generate_exception(ctx, EXCP_RI);
 }
 
+/* Verify that the processor is running with DSP instructions enabled.
+   This is enabled by CP0 Status register MX(24) bit.
+ */
+
+static inline void check_dsp(DisasContext *ctx)
+{
+    if (unlikely(!(ctx->hflags & MIPS_HFLAG_DSP))) {
+        generate_exception(ctx, EXCP_DSPDIS);
+    }
+}
+
+static inline void check_dspr2(DisasContext *ctx)
+{
+    if (unlikely(!(ctx->hflags & MIPS_HFLAG_DSPR2))) {
+        generate_exception(ctx, EXCP_DSPDIS);
+    }
+}
+
 /* This code generates a "reserved instruction" exception if the
    CPU does not support the instruction set corresponding to flags. */
 static inline void check_insn(CPUMIPSState *env, DisasContext *ctx, int flags)
@@ -13196,6 +13214,11 @@ void cpu_state_reset(CPUMIPSState *env)
     if (env->CP0_Config1 & (1 << CP0C1_FP)) {
         env->CP0_Status |= (1 << CP0St_CU1);
     }
+    if (env->cpu_model->insn_flags & ASE_DSPR2) {
+        env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2;
+    } else if (env->cpu_model->insn_flags & ASE_DSP) {
+        env->hflags |= MIPS_HFLAG_DSP;
+    }
 #else
     if (env->hflags & MIPS_HFLAG_BMASK) {
         /* If the exception was raised from a delay slot,
-- 
1.7.10.2 (Apple Git-33)

  parent reply	other threads:[~2012-09-27 13:25 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-27 13:24 [Qemu-devel] [PATCH v9 00/14] QEMU MIPS ASE DSP support Jia Liu
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 01/14] target-mips-ase-dsp: Add internal funtions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` Jia Liu [this message]
2012-10-06 14:51   ` [Qemu-devel] [PATCH v9 02/14] target-mips-ase-dsp: Add dsp resources access check Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 03/14] target-mips-ase-dsp: Use correct acc value to index cpu_HI/cpu_LO rather than using a fix number Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 04/14] target-mips-ase-dsp: Add branch instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 05/14] target-mips-ase-dsp: Add load instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 06/14] target-mips-ase-dsp: Add arithmetic instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 07/14] target-mips-ase-dsp: Add GPR-based shift instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 08/14] target-mips-ase-dsp: Add multiply instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 09/14] target-mips-ase-dsp: Add bit/manipulation instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 10/14] target-mips-ase-dsp: Add compare-pick instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 11/14] target-mips-ase-dsp: Add DSP accumulator instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 12/14] target-mips-ase-dsp: Add MIPS DSP processors Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 13/14] target-mips-ase-dsp: Add testcases Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 14/14] target-mips-ase-dsp: Change TODO file Jia Liu
2012-10-06 14:52   ` Aurelien Jarno
2012-10-06  2:33 ` [Qemu-devel] [PATCH v9 00/14] QEMU MIPS ASE DSP support Jia Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1348752291-6041-3-git-send-email-proljc@gmail.com \
    --to=proljc@gmail.com \
    --cc=aurelien@aurel32.net \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.