All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jia Liu <proljc@gmail.com>
To: qemu-devel@nongnu.org
Cc: aurelien@aurel32.net
Subject: [Qemu-devel] [PATCH v9 04/14] target-mips-ase-dsp: Add branch instructions
Date: Thu, 27 Sep 2012 21:24:41 +0800	[thread overview]
Message-ID: <1348752291-6041-5-git-send-email-proljc@gmail.com> (raw)
In-Reply-To: <1348752291-6041-1-git-send-email-proljc@gmail.com>

Add MIPS ASE DSP Branch instructions.

Signed-off-by: Jia Liu <proljc@gmail.com>
---
 target-mips/translate.c |   36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/target-mips/translate.c b/target-mips/translate.c
index 1927781..4103f24 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -332,6 +332,14 @@ enum {
     OPC_DSHD     = (0x05 << 6) | OPC_DBSHFL,
 };
 
+/* MIPS DSP REGIMM opcodes */
+enum {
+    OPC_BPOSGE32 = (0x1C << 16) | OPC_REGIMM,
+#if defined(TARGET_MIPS64)
+    OPC_BPOSGE64 = (0x1D << 16) | OPC_REGIMM,
+#endif
+};
+
 /* Coprocessor 0 (rs field) */
 #define MASK_CP0(op)       MASK_OP_MAJOR(op) | (op & (0x1F << 21))
 
@@ -3224,6 +3232,16 @@ static void gen_compute_branch (DisasContext *ctx, uint32_t opc,
         }
         btgt = ctx->pc + insn_bytes + offset;
         break;
+    case OPC_BPOSGE32:
+#if defined(TARGET_MIPS64)
+    case OPC_BPOSGE64:
+        tcg_gen_andi_tl(t0, cpu_dspctrl, 0x7F);
+#else
+        tcg_gen_andi_tl(t0, cpu_dspctrl, 0x3F);
+#endif
+        bcond_compute = 1;
+        btgt = ctx->pc + insn_bytes + offset;
+        break;
     case OPC_J:
     case OPC_JAL:
     case OPC_JALX:
@@ -3412,6 +3430,16 @@ static void gen_compute_branch (DisasContext *ctx, uint32_t opc,
             tcg_gen_setcondi_tl(TCG_COND_LT, bcond, t0, 0);
             MIPS_DEBUG("bltzl %s, " TARGET_FMT_lx, regnames[rs], btgt);
             goto likely;
+        case OPC_BPOSGE32:
+            tcg_gen_setcondi_tl(TCG_COND_GE, bcond, t0, 32);
+            MIPS_DEBUG("bposge32 " TARGET_FMT_lx, btgt);
+            goto not_likely;
+#if defined(TARGET_MIPS64)
+        case OPC_BPOSGE64:
+            tcg_gen_setcondi_tl(TCG_COND_GE, bcond, t0, 64);
+            MIPS_DEBUG("bposge64 " TARGET_FMT_lx, btgt);
+            goto not_likely;
+#endif
         case OPC_BLTZALS:
         case OPC_BLTZAL:
             ctx->hflags |= (opc == OPC_BLTZALS
@@ -12582,6 +12610,14 @@ static void decode_opc (CPUMIPSState *env, DisasContext *ctx, int *is_branch)
             check_insn(env, ctx, ISA_MIPS32R2);
             /* Treat as NOP. */
             break;
+        case OPC_BPOSGE32:    /* MIPS DSP branch */
+#if defined(TARGET_MIPS64)
+        case OPC_BPOSGE64:
+#endif
+            check_dsp(ctx);
+            gen_compute_branch(ctx, op1, 4, -1, -2, (int32_t)imm << 2);
+            *is_branch = 1;
+            break;
         default:            /* Invalid */
             MIPS_INVAL("regimm");
             generate_exception(ctx, EXCP_RI);
-- 
1.7.10.2 (Apple Git-33)

  parent reply	other threads:[~2012-09-27 13:25 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-27 13:24 [Qemu-devel] [PATCH v9 00/14] QEMU MIPS ASE DSP support Jia Liu
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 01/14] target-mips-ase-dsp: Add internal funtions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 02/14] target-mips-ase-dsp: Add dsp resources access check Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 03/14] target-mips-ase-dsp: Use correct acc value to index cpu_HI/cpu_LO rather than using a fix number Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` Jia Liu [this message]
2012-10-06 14:51   ` [Qemu-devel] [PATCH v9 04/14] target-mips-ase-dsp: Add branch instructions Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 05/14] target-mips-ase-dsp: Add load instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 06/14] target-mips-ase-dsp: Add arithmetic instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 07/14] target-mips-ase-dsp: Add GPR-based shift instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 08/14] target-mips-ase-dsp: Add multiply instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 09/14] target-mips-ase-dsp: Add bit/manipulation instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 10/14] target-mips-ase-dsp: Add compare-pick instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 11/14] target-mips-ase-dsp: Add DSP accumulator instructions Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 12/14] target-mips-ase-dsp: Add MIPS DSP processors Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 13/14] target-mips-ase-dsp: Add testcases Jia Liu
2012-10-06 14:51   ` Aurelien Jarno
2012-09-27 13:24 ` [Qemu-devel] [PATCH v9 14/14] target-mips-ase-dsp: Change TODO file Jia Liu
2012-10-06 14:52   ` Aurelien Jarno
2012-10-06  2:33 ` [Qemu-devel] [PATCH v9 00/14] QEMU MIPS ASE DSP support Jia Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1348752291-6041-5-git-send-email-proljc@gmail.com \
    --to=proljc@gmail.com \
    --cc=aurelien@aurel32.net \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.