From: linux@prisktech.co.nz (Tony Prisk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] DOC: PWM: Adding binding document for via,vt8500-pwm
Date: Fri, 19 Oct 2012 23:38:55 +1300 [thread overview]
Message-ID: <1350643135-13197-3-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1350643135-13197-1-git-send-email-linux@prisktech.co.nz>
Add a binding document describing the PWM controller found
on arch-vt8500 supported SoCs.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/pwm/vt8500-pwm.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
new file mode 100644
index 0000000..e8ba133
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -0,0 +1,17 @@
+VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+Required properties:
+- compatible: should be "via,vt8500-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. The first cell specifies the per-chip index
+ of the PWM to use and the second cell is the period in nanoseconds.
+- clocks: pHandle to the PWM source clock
+
+Example:
+
+pwm1: pwm at d8220000 {
+ #pwm-cells = <2>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x1000>;
+ clocks = <&clkpwm>;
+};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
To: Thierry Reding
<thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>,
arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 3/3] DOC: PWM: Adding binding document for via,vt8500-pwm
Date: Fri, 19 Oct 2012 23:38:55 +1300 [thread overview]
Message-ID: <1350643135-13197-3-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1350643135-13197-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
Add a binding document describing the PWM controller found
on arch-vt8500 supported SoCs.
Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
.../devicetree/bindings/pwm/vt8500-pwm.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
new file mode 100644
index 0000000..e8ba133
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -0,0 +1,17 @@
+VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+Required properties:
+- compatible: should be "via,vt8500-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. The first cell specifies the per-chip index
+ of the PWM to use and the second cell is the period in nanoseconds.
+- clocks: pHandle to the PWM source clock
+
+Example:
+
+pwm1: pwm@d8220000 {
+ #pwm-cells = <2>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x1000>;
+ clocks = <&clkpwm>;
+};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Tony Prisk <linux@prisktech.co.nz>
To: Thierry Reding <thierry.reding@avionic-design.de>, arm@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org,
Tony Prisk <linux@prisktech.co.nz>
Subject: [PATCH 3/3] DOC: PWM: Adding binding document for via,vt8500-pwm
Date: Fri, 19 Oct 2012 23:38:55 +1300 [thread overview]
Message-ID: <1350643135-13197-3-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1350643135-13197-1-git-send-email-linux@prisktech.co.nz>
Add a binding document describing the PWM controller found
on arch-vt8500 supported SoCs.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/pwm/vt8500-pwm.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
new file mode 100644
index 0000000..e8ba133
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -0,0 +1,17 @@
+VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+Required properties:
+- compatible: should be "via,vt8500-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. The first cell specifies the per-chip index
+ of the PWM to use and the second cell is the period in nanoseconds.
+- clocks: pHandle to the PWM source clock
+
+Example:
+
+pwm1: pwm@d8220000 {
+ #pwm-cells = <2>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x1000>;
+ clocks = <&clkpwm>;
+};
--
1.7.9.5
next prev parent reply other threads:[~2012-10-19 10:38 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-19 10:38 [PATCH 1/3] ARM: dts: Update board files for pwm support Tony Prisk
2012-10-19 10:38 ` Tony Prisk
2012-10-19 10:38 ` [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support Tony Prisk
2012-10-19 10:38 ` Tony Prisk
2012-10-19 10:38 ` Tony Prisk
2012-10-22 6:34 ` Thierry Reding
2012-10-22 6:34 ` Thierry Reding
2012-10-22 6:51 ` Tony Prisk
2012-10-22 6:51 ` Tony Prisk
2012-10-22 7:09 ` Tony Prisk
2012-10-22 7:09 ` Tony Prisk
2012-10-22 7:09 ` Tony Prisk
2012-10-22 7:24 ` Thierry Reding
2012-10-22 7:24 ` Thierry Reding
2012-10-22 7:24 ` Thierry Reding
2012-10-22 7:36 ` Tony Prisk
2012-10-22 7:36 ` Tony Prisk
2012-10-22 8:04 ` Thierry Reding
2012-10-22 8:04 ` Thierry Reding
2012-10-22 8:13 ` [PATCH v2] pwm: " Tony Prisk
2012-10-22 8:13 ` Tony Prisk
2012-10-22 8:13 ` Tony Prisk
2012-10-22 8:40 ` Thierry Reding
2012-10-22 8:40 ` Thierry Reding
2012-10-22 18:10 ` [PATCH v3] " Tony Prisk
2012-10-22 18:10 ` Tony Prisk
2012-10-23 22:14 ` Thierry Reding
2012-10-23 22:14 ` Thierry Reding
2012-10-24 3:46 ` Tony Prisk
2012-10-24 3:46 ` Tony Prisk
2012-10-24 5:41 ` Thierry Reding
2012-10-24 5:41 ` Thierry Reding
2012-10-24 17:35 ` Tony Prisk
2012-10-24 17:35 ` Tony Prisk
2012-10-24 3:48 ` Tony Prisk
2012-10-24 3:48 ` Tony Prisk
2012-10-23 8:41 ` [PATCH 2/3] PWM: " Tony Prisk
2012-10-23 8:41 ` Tony Prisk
2012-10-23 9:22 ` Thierry Reding
2012-10-23 9:22 ` Thierry Reding
2012-10-23 9:22 ` Thierry Reding
2012-10-23 9:31 ` Russell King - ARM Linux
2012-10-23 9:31 ` Russell King - ARM Linux
2012-10-23 9:31 ` Russell King - ARM Linux
2012-10-23 9:56 ` Thierry Reding
2012-10-23 9:56 ` Thierry Reding
2012-10-22 7:11 ` Thierry Reding
2012-10-22 7:11 ` Thierry Reding
2012-10-22 11:50 ` Arnd Bergmann
2012-10-22 11:50 ` Arnd Bergmann
2012-10-22 12:07 ` Thierry Reding
2012-10-22 12:07 ` Thierry Reding
2012-10-22 13:52 ` Arnd Bergmann
2012-10-22 13:52 ` Arnd Bergmann
2012-10-22 13:52 ` Arnd Bergmann
2012-10-22 15:08 ` Thierry Reding
2012-10-22 15:08 ` Thierry Reding
2012-10-22 15:08 ` Thierry Reding
2012-10-22 17:49 ` Tony Prisk
2012-10-22 17:49 ` Tony Prisk
2012-10-19 10:38 ` Tony Prisk [this message]
2012-10-19 10:38 ` [PATCH 3/3] DOC: PWM: Adding binding document for via,vt8500-pwm Tony Prisk
2012-10-19 10:38 ` Tony Prisk
2012-10-22 6:35 ` Thierry Reding
2012-10-22 6:35 ` Thierry Reding
2012-10-22 6:53 ` Tony Prisk
2012-10-22 6:53 ` Tony Prisk
2012-10-19 22:37 ` [PATCH 1/3] ARM: dts: Update board files for pwm support Tony Prisk
2012-10-19 22:37 ` Tony Prisk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350643135-13197-3-git-send-email-linux@prisktech.co.nz \
--to=linux@prisktech.co.nz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.