All of lore.kernel.org
 help / color / mirror / Atom feed
From: linux@prisktech.co.nz (Tony Prisk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] pwm: vt8500: Update vt8500 PWM driver support
Date: Tue, 23 Oct 2012 07:10:24 +1300	[thread overview]
Message-ID: <1350929425-17516-1-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <20121022084000.GB29790@avionic-0098.mockup.avionic-design.de>

This patch updates pwm-vt8500.c to support devicetree probing and
make use of the common clock subsystem.

A binding document describing the PWM controller found on
arch-vt8500 is also included.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 .../devicetree/bindings/pwm/vt8500-pwm.txt         |   17 ++++
 drivers/pwm/pwm-vt8500.c                           |   83 ++++++++++++++------
 2 files changed, 77 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pwm/vt8500-pwm.txt

diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
new file mode 100644
index 0000000..bcc6367
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -0,0 +1,17 @@
+VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+Required properties:
+- compatible: should be "via,vt8500-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2.  The first cell specifies the per-chip index
+  of the PWM to use and the second cell is the period in nanoseconds.
+- clocks: phandle to the PWM source clock
+
+Example:
+
+pwm1: pwm at d8220000 {
+	#pwm-cells = <2>;
+	compatible = "via,vt8500-pwm";
+	reg = <0xd8220000 0x1000>;
+	clocks = <&clkpwm>;
+};
diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c
index ad14389..ebbc41c 100644
--- a/drivers/pwm/pwm-vt8500.c
+++ b/drivers/pwm/pwm-vt8500.c
@@ -1,7 +1,8 @@
 /*
  * drivers/pwm/pwm-vt8500.c
  *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -21,14 +22,24 @@
 #include <linux/io.h>
 #include <linux/pwm.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/div64.h>
 
-#define VT8500_NR_PWMS 4
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+/*
+ * SoC architecture allocates register space for 4 PWMs but only
+ * 2 are currently implemented.
+ */
+#define VT8500_NR_PWMS	2
 
 struct vt8500_chip {
 	struct pwm_chip chip;
 	void __iomem *base;
+	struct clk *clk;
 };
 
 #define to_vt8500_chip(chip)	container_of(chip, struct vt8500_chip, chip)
@@ -52,7 +63,7 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long long c;
 	unsigned long period_cycles, prescale, pv, dc;
 
-	c = 25000000/2; /* wild guess --- need to implement clocks */
+	c = clk_get_rate(vt8500->clk);
 	c = c * period_ns;
 	do_div(c, 1000000000);
 	period_cycles = c;
@@ -87,6 +98,11 @@ static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
 
+	if (!clk_enable(vt8500->clk)) {
+		dev_err(chip->dev, "failed to enable clock\n");
+		return -EBUSY;
+	};
+
 	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
 	writel(5, vt8500->base + (pwm->hwpwm << 4));
 	return 0;
@@ -98,6 +114,8 @@ static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 
 	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
 	writel(0, vt8500->base + (pwm->hwpwm << 4));
+
+	clk_disable(vt8500->clk);
 }
 
 static struct pwm_ops vt8500_pwm_ops = {
@@ -107,12 +125,24 @@ static struct pwm_ops vt8500_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
-static int __devinit pwm_probe(struct platform_device *pdev)
+static const struct of_device_id vt8500_pwm_dt_ids[] = {
+	{ .compatible = "via,vt8500-pwm", },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
+
+static int vt8500_pwm_probe(struct platform_device *pdev)
 {
 	struct vt8500_chip *chip;
 	struct resource *r;
+	struct device_node *np = pdev->dev.of_node;
 	int ret;
 
+	if (!np) {
+		dev_err(&pdev->dev, "invalid devicetree node\n");
+		return -EINVAL;
+	}
+
 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
@@ -123,6 +153,12 @@ static int __devinit pwm_probe(struct platform_device *pdev)
 	chip->chip.ops = &vt8500_pwm_ops;
 	chip->chip.base = -1;
 	chip->chip.npwm = VT8500_NR_PWMS;
+	chip->clk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR_OR_NULL(chip->clk)) {
+		dev_err(&pdev->dev, "clock source not specified\n");
+		return PTR_ERR(chip->clk);
+	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
@@ -131,18 +167,25 @@ static int __devinit pwm_probe(struct platform_device *pdev)
 	}
 
 	chip->base = devm_request_and_ioremap(&pdev->dev, r);
-	if (chip->base == NULL)
+	if (!chip->base)
 		return -EADDRNOTAVAIL;
 
+	if (!clk_prepare(chip->clk)) {
+		dev_err(&pdev->dev, "failed to prepare clock\n");
+		return -EBUSY;
+	}
+
 	ret = pwmchip_add(&chip->chip);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add pwmchip\n");
 		return ret;
+	}
 
 	platform_set_drvdata(pdev, chip);
 	return ret;
 }
 
-static int __devexit pwm_remove(struct platform_device *pdev)
+static int vt8500_pwm_remove(struct platform_device *pdev)
 {
 	struct vt8500_chip *chip;
 
@@ -150,28 +193,22 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 	if (chip == NULL)
 		return -ENODEV;
 
+	clk_unprepare(chip->clk);
+
 	return pwmchip_remove(&chip->chip);
 }
 
-static struct platform_driver pwm_driver = {
+static struct platform_driver vt8500_pwm_driver = {
+	.probe		= vt8500_pwm_probe,
+	.remove		= vt8500_pwm_remove,
 	.driver		= {
 		.name	= "vt8500-pwm",
 		.owner	= THIS_MODULE,
+		.of_match_table = vt8500_pwm_dt_ids,
 	},
-	.probe		= pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
 };
+module_platform_driver(vt8500_pwm_driver);
 
-static int __init pwm_init(void)
-{
-	return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
-	platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VT8500 PWM Driver");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: Tony Prisk <linux@prisktech.co.nz>
To: thierry.reding@avionic-design.de
Cc: devicetree-discuss@lists.ozlabs.org, arm@kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Tony Prisk <linux@prisktech.co.nz>
Subject: [PATCH v3] pwm: vt8500: Update vt8500 PWM driver support
Date: Tue, 23 Oct 2012 07:10:24 +1300	[thread overview]
Message-ID: <1350929425-17516-1-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <20121022084000.GB29790@avionic-0098.mockup.avionic-design.de>

This patch updates pwm-vt8500.c to support devicetree probing and
make use of the common clock subsystem.

A binding document describing the PWM controller found on
arch-vt8500 is also included.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 .../devicetree/bindings/pwm/vt8500-pwm.txt         |   17 ++++
 drivers/pwm/pwm-vt8500.c                           |   83 ++++++++++++++------
 2 files changed, 77 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pwm/vt8500-pwm.txt

diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
new file mode 100644
index 0000000..bcc6367
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -0,0 +1,17 @@
+VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+Required properties:
+- compatible: should be "via,vt8500-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2.  The first cell specifies the per-chip index
+  of the PWM to use and the second cell is the period in nanoseconds.
+- clocks: phandle to the PWM source clock
+
+Example:
+
+pwm1: pwm@d8220000 {
+	#pwm-cells = <2>;
+	compatible = "via,vt8500-pwm";
+	reg = <0xd8220000 0x1000>;
+	clocks = <&clkpwm>;
+};
diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c
index ad14389..ebbc41c 100644
--- a/drivers/pwm/pwm-vt8500.c
+++ b/drivers/pwm/pwm-vt8500.c
@@ -1,7 +1,8 @@
 /*
  * drivers/pwm/pwm-vt8500.c
  *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -21,14 +22,24 @@
 #include <linux/io.h>
 #include <linux/pwm.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/div64.h>
 
-#define VT8500_NR_PWMS 4
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+/*
+ * SoC architecture allocates register space for 4 PWMs but only
+ * 2 are currently implemented.
+ */
+#define VT8500_NR_PWMS	2
 
 struct vt8500_chip {
 	struct pwm_chip chip;
 	void __iomem *base;
+	struct clk *clk;
 };
 
 #define to_vt8500_chip(chip)	container_of(chip, struct vt8500_chip, chip)
@@ -52,7 +63,7 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long long c;
 	unsigned long period_cycles, prescale, pv, dc;
 
-	c = 25000000/2; /* wild guess --- need to implement clocks */
+	c = clk_get_rate(vt8500->clk);
 	c = c * period_ns;
 	do_div(c, 1000000000);
 	period_cycles = c;
@@ -87,6 +98,11 @@ static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
 
+	if (!clk_enable(vt8500->clk)) {
+		dev_err(chip->dev, "failed to enable clock\n");
+		return -EBUSY;
+	};
+
 	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
 	writel(5, vt8500->base + (pwm->hwpwm << 4));
 	return 0;
@@ -98,6 +114,8 @@ static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 
 	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
 	writel(0, vt8500->base + (pwm->hwpwm << 4));
+
+	clk_disable(vt8500->clk);
 }
 
 static struct pwm_ops vt8500_pwm_ops = {
@@ -107,12 +125,24 @@ static struct pwm_ops vt8500_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
-static int __devinit pwm_probe(struct platform_device *pdev)
+static const struct of_device_id vt8500_pwm_dt_ids[] = {
+	{ .compatible = "via,vt8500-pwm", },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
+
+static int vt8500_pwm_probe(struct platform_device *pdev)
 {
 	struct vt8500_chip *chip;
 	struct resource *r;
+	struct device_node *np = pdev->dev.of_node;
 	int ret;
 
+	if (!np) {
+		dev_err(&pdev->dev, "invalid devicetree node\n");
+		return -EINVAL;
+	}
+
 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
@@ -123,6 +153,12 @@ static int __devinit pwm_probe(struct platform_device *pdev)
 	chip->chip.ops = &vt8500_pwm_ops;
 	chip->chip.base = -1;
 	chip->chip.npwm = VT8500_NR_PWMS;
+	chip->clk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR_OR_NULL(chip->clk)) {
+		dev_err(&pdev->dev, "clock source not specified\n");
+		return PTR_ERR(chip->clk);
+	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
@@ -131,18 +167,25 @@ static int __devinit pwm_probe(struct platform_device *pdev)
 	}
 
 	chip->base = devm_request_and_ioremap(&pdev->dev, r);
-	if (chip->base == NULL)
+	if (!chip->base)
 		return -EADDRNOTAVAIL;
 
+	if (!clk_prepare(chip->clk)) {
+		dev_err(&pdev->dev, "failed to prepare clock\n");
+		return -EBUSY;
+	}
+
 	ret = pwmchip_add(&chip->chip);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add pwmchip\n");
 		return ret;
+	}
 
 	platform_set_drvdata(pdev, chip);
 	return ret;
 }
 
-static int __devexit pwm_remove(struct platform_device *pdev)
+static int vt8500_pwm_remove(struct platform_device *pdev)
 {
 	struct vt8500_chip *chip;
 
@@ -150,28 +193,22 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 	if (chip == NULL)
 		return -ENODEV;
 
+	clk_unprepare(chip->clk);
+
 	return pwmchip_remove(&chip->chip);
 }
 
-static struct platform_driver pwm_driver = {
+static struct platform_driver vt8500_pwm_driver = {
+	.probe		= vt8500_pwm_probe,
+	.remove		= vt8500_pwm_remove,
 	.driver		= {
 		.name	= "vt8500-pwm",
 		.owner	= THIS_MODULE,
+		.of_match_table = vt8500_pwm_dt_ids,
 	},
-	.probe		= pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
 };
+module_platform_driver(vt8500_pwm_driver);
 
-static int __init pwm_init(void)
-{
-	return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
-	platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VT8500 PWM Driver");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

  reply	other threads:[~2012-10-22 18:10 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-19 10:38 [PATCH 1/3] ARM: dts: Update board files for pwm support Tony Prisk
2012-10-19 10:38 ` Tony Prisk
2012-10-19 10:38 ` [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support Tony Prisk
2012-10-19 10:38   ` Tony Prisk
2012-10-19 10:38   ` Tony Prisk
2012-10-22  6:34   ` Thierry Reding
2012-10-22  6:34     ` Thierry Reding
2012-10-22  6:51     ` Tony Prisk
2012-10-22  6:51       ` Tony Prisk
2012-10-22  7:09       ` Tony Prisk
2012-10-22  7:09         ` Tony Prisk
2012-10-22  7:09         ` Tony Prisk
2012-10-22  7:24         ` Thierry Reding
2012-10-22  7:24           ` Thierry Reding
2012-10-22  7:24           ` Thierry Reding
2012-10-22  7:36           ` Tony Prisk
2012-10-22  7:36             ` Tony Prisk
2012-10-22  8:04             ` Thierry Reding
2012-10-22  8:04               ` Thierry Reding
2012-10-22  8:13               ` [PATCH v2] pwm: " Tony Prisk
2012-10-22  8:13                 ` Tony Prisk
2012-10-22  8:13                 ` Tony Prisk
2012-10-22  8:40                 ` Thierry Reding
2012-10-22  8:40                   ` Thierry Reding
2012-10-22 18:10                   ` Tony Prisk [this message]
2012-10-22 18:10                     ` [PATCH v3] " Tony Prisk
2012-10-23 22:14                     ` Thierry Reding
2012-10-23 22:14                       ` Thierry Reding
2012-10-24  3:46                       ` Tony Prisk
2012-10-24  3:46                         ` Tony Prisk
2012-10-24  5:41                         ` Thierry Reding
2012-10-24  5:41                           ` Thierry Reding
2012-10-24 17:35                           ` Tony Prisk
2012-10-24 17:35                             ` Tony Prisk
2012-10-24  3:48                       ` Tony Prisk
2012-10-24  3:48                         ` Tony Prisk
2012-10-23  8:41               ` [PATCH 2/3] PWM: " Tony Prisk
2012-10-23  8:41                 ` Tony Prisk
2012-10-23  9:22                 ` Thierry Reding
2012-10-23  9:22                   ` Thierry Reding
2012-10-23  9:22                   ` Thierry Reding
2012-10-23  9:31                   ` Russell King - ARM Linux
2012-10-23  9:31                     ` Russell King - ARM Linux
2012-10-23  9:31                     ` Russell King - ARM Linux
2012-10-23  9:56                     ` Thierry Reding
2012-10-23  9:56                       ` Thierry Reding
2012-10-22  7:11       ` Thierry Reding
2012-10-22  7:11         ` Thierry Reding
2012-10-22 11:50         ` Arnd Bergmann
2012-10-22 11:50           ` Arnd Bergmann
2012-10-22 12:07           ` Thierry Reding
2012-10-22 12:07             ` Thierry Reding
2012-10-22 13:52             ` Arnd Bergmann
2012-10-22 13:52               ` Arnd Bergmann
2012-10-22 13:52               ` Arnd Bergmann
2012-10-22 15:08               ` Thierry Reding
2012-10-22 15:08                 ` Thierry Reding
2012-10-22 15:08                 ` Thierry Reding
2012-10-22 17:49                 ` Tony Prisk
2012-10-22 17:49                   ` Tony Prisk
2012-10-19 10:38 ` [PATCH 3/3] DOC: PWM: Adding binding document for via,vt8500-pwm Tony Prisk
2012-10-19 10:38   ` Tony Prisk
2012-10-19 10:38   ` Tony Prisk
2012-10-22  6:35   ` Thierry Reding
2012-10-22  6:35     ` Thierry Reding
2012-10-22  6:53     ` Tony Prisk
2012-10-22  6:53       ` Tony Prisk
2012-10-19 22:37 ` [PATCH 1/3] ARM: dts: Update board files for pwm support Tony Prisk
2012-10-19 22:37   ` Tony Prisk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1350929425-17516-1-git-send-email-linux@prisktech.co.nz \
    --to=linux@prisktech.co.nz \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.