From: peterz@infradead.org (Peter Zijlstra)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v3 5/6] sched: pack the idle load balance
Date: Tue, 26 Mar 2013 13:52:39 +0100 [thread overview]
Message-ID: <1364302359.5053.21.camel@laptop> (raw)
In-Reply-To: <1363955155-18382-6-git-send-email-vincent.guittot@linaro.org>
On Fri, 2013-03-22 at 13:25 +0100, Vincent Guittot wrote:
> Look for an idle CPU close to the pack buddy CPU whenever possible.
> The goal is to prevent the wake up of a CPU which doesn't share the
> power
> domain of the pack buddy CPU.
>
> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> Reviewed-by: Morten Rasmussen <morten.rasmussen@arm.com>
> ---
> kernel/sched/fair.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> index b636199..52a7736 100644
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -5455,7 +5455,25 @@ static struct {
>
> static inline int find_new_ilb(int call_cpu)
> {
> + struct sched_domain *sd;
> int ilb = cpumask_first(nohz.idle_cpus_mask);
> + int buddy = per_cpu(sd_pack_buddy, call_cpu);
> +
> + /*
> + * If we have a pack buddy CPU, we try to run load balance on
> a CPU
> + * that is close to the buddy.
> + */
> + if (buddy != -1)
> + for_each_domain(buddy, sd) {
> + if (sd->flags & SD_SHARE_CPUPOWER)
> + continue;
> +
> + ilb = cpumask_first_and(sched_domain_span(sd),
> + nohz.idle_cpus_mask);
> +
> + if (ilb < nr_cpu_ids)
> + break;
> + }
/me hands you a fresh bucket of curlies, no reason to skimp on them.
But ha! here's your NO_HZ link.. but does the above DTRT and ensure
that the ILB is a little core when possible?
WARNING: multiple messages have this Message-ID (diff)
From: Peter Zijlstra <peterz@infradead.org>
To: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linaro-kernel@lists.linaro.org, mingo@kernel.org,
linux@arm.linux.org.uk, pjt@google.com, santosh.shilimkar@ti.com,
morten.rasmussen@arm.com, chander.kashyap@linaro.org,
cmetcalf@tilera.com, tony.luck@intel.com, alex.shi@intel.com,
preeti@linux.vnet.ibm.com, paulmck@linux.vnet.ibm.com,
tglx@linutronix.de, len.brown@intel.com, arjan@linux.intel.com,
amit.kucheria@linaro.org, corbet@lwn.net
Subject: Re: [RFC PATCH v3 5/6] sched: pack the idle load balance
Date: Tue, 26 Mar 2013 13:52:39 +0100 [thread overview]
Message-ID: <1364302359.5053.21.camel@laptop> (raw)
In-Reply-To: <1363955155-18382-6-git-send-email-vincent.guittot@linaro.org>
On Fri, 2013-03-22 at 13:25 +0100, Vincent Guittot wrote:
> Look for an idle CPU close to the pack buddy CPU whenever possible.
> The goal is to prevent the wake up of a CPU which doesn't share the
> power
> domain of the pack buddy CPU.
>
> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> Reviewed-by: Morten Rasmussen <morten.rasmussen@arm.com>
> ---
> kernel/sched/fair.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> index b636199..52a7736 100644
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -5455,7 +5455,25 @@ static struct {
>
> static inline int find_new_ilb(int call_cpu)
> {
> + struct sched_domain *sd;
> int ilb = cpumask_first(nohz.idle_cpus_mask);
> + int buddy = per_cpu(sd_pack_buddy, call_cpu);
> +
> + /*
> + * If we have a pack buddy CPU, we try to run load balance on
> a CPU
> + * that is close to the buddy.
> + */
> + if (buddy != -1)
> + for_each_domain(buddy, sd) {
> + if (sd->flags & SD_SHARE_CPUPOWER)
> + continue;
> +
> + ilb = cpumask_first_and(sched_domain_span(sd),
> + nohz.idle_cpus_mask);
> +
> + if (ilb < nr_cpu_ids)
> + break;
> + }
/me hands you a fresh bucket of curlies, no reason to skimp on them.
But ha! here's your NO_HZ link.. but does the above DTRT and ensure
that the ILB is a little core when possible?
next prev parent reply other threads:[~2013-03-26 12:52 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-22 12:25 [RFC PATCH v3 0/6] sched: packing small tasks Vincent Guittot
2013-03-22 12:25 ` Vincent Guittot
2013-03-22 12:25 ` [RFC PATCH v3 1/6] Revert "sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking" Vincent Guittot
2013-03-22 12:25 ` Vincent Guittot
2013-03-22 12:25 ` [RFC PATCH v3 2/6] sched: add a new SD_SHARE_POWERDOMAIN flag for sched_domain Vincent Guittot
2013-03-22 12:25 ` Vincent Guittot
2013-03-22 12:25 ` [RFC PATCH v3 3/6] sched: pack small tasks Vincent Guittot
2013-03-22 12:25 ` Vincent Guittot
2013-03-26 12:26 ` Peter Zijlstra
2013-03-26 12:26 ` Peter Zijlstra
2013-03-27 10:21 ` Preeti U Murthy
2013-03-27 10:21 ` Preeti U Murthy
2013-03-27 11:00 ` Vincent Guittot
2013-03-27 11:00 ` Vincent Guittot
2013-04-26 10:30 ` Peter Zijlstra
2013-04-26 10:30 ` Peter Zijlstra
2013-04-26 11:34 ` Vincent Guittot
2013-04-26 11:34 ` Vincent Guittot
2013-04-26 10:18 ` Peter Zijlstra
2013-04-26 10:18 ` Peter Zijlstra
2013-04-26 10:32 ` Preeti U Murthy
2013-04-26 10:32 ` Preeti U Murthy
2013-03-26 12:37 ` Peter Zijlstra
2013-03-26 12:37 ` Peter Zijlstra
2013-03-26 13:00 ` Vincent Guittot
2013-03-26 13:00 ` Vincent Guittot
2013-03-27 4:33 ` Preeti U Murthy
2013-03-27 4:33 ` Preeti U Murthy
2013-03-27 4:48 ` Alex Shi
2013-03-27 4:48 ` Alex Shi
2013-03-27 8:51 ` Peter Zijlstra
2013-03-27 8:51 ` Peter Zijlstra
2013-03-26 12:46 ` Peter Zijlstra
2013-03-26 12:46 ` Peter Zijlstra
2013-03-26 13:53 ` Vincent Guittot
2013-03-26 13:53 ` Vincent Guittot
2013-03-26 15:29 ` Arjan van de Ven
2013-03-26 15:29 ` Arjan van de Ven
2013-03-27 8:46 ` Peter Zijlstra
2013-03-27 8:46 ` Peter Zijlstra
2013-03-27 8:54 ` Vincent Guittot
2013-03-27 8:54 ` Vincent Guittot
2013-03-27 9:00 ` Peter Zijlstra
2013-03-27 9:00 ` Peter Zijlstra
2013-03-27 11:18 ` Catalin Marinas
2013-03-27 14:13 ` Peter Zijlstra
2013-03-27 16:36 ` Catalin Marinas
2013-03-27 17:18 ` Nicolas Pitre
2013-03-27 17:18 ` Nicolas Pitre
2013-03-27 17:37 ` Catalin Marinas
2013-03-27 17:37 ` Catalin Marinas
2013-03-27 17:20 ` Vincent Guittot
2013-03-27 18:01 ` Catalin Marinas
2013-03-27 15:37 ` Nicolas Pitre
2013-03-27 15:37 ` Nicolas Pitre
2013-03-22 12:25 ` [RFC PATCH v3 4/6] sched: secure access to other CPU statistics Vincent Guittot
2013-03-22 12:25 ` Vincent Guittot
2013-03-26 12:50 ` Peter Zijlstra
2013-03-26 12:50 ` Peter Zijlstra
2013-03-26 13:06 ` Vincent Guittot
2013-03-26 13:06 ` Vincent Guittot
2013-03-22 12:25 ` [RFC PATCH v3 5/6] sched: pack the idle load balance Vincent Guittot
2013-03-22 12:25 ` Vincent Guittot
2013-03-26 12:52 ` Peter Zijlstra [this message]
2013-03-26 12:52 ` Peter Zijlstra
2013-03-26 14:03 ` Vincent Guittot
2013-03-26 14:03 ` Vincent Guittot
2013-03-26 14:42 ` Peter Zijlstra
2013-03-26 14:42 ` Peter Zijlstra
2013-03-26 15:55 ` Vincent Guittot
2013-03-26 15:55 ` Vincent Guittot
2013-03-27 4:56 ` Alex Shi
2013-03-27 4:56 ` Alex Shi
2013-03-27 8:05 ` Vincent Guittot
2013-03-27 8:05 ` Vincent Guittot
2013-03-27 8:47 ` Alex Shi
2013-03-27 8:47 ` Alex Shi
2013-03-27 10:30 ` Vincent Guittot
2013-03-27 10:30 ` Vincent Guittot
2013-03-27 13:32 ` Alex Shi
2013-03-27 13:32 ` Alex Shi
2013-03-27 8:49 ` Peter Zijlstra
2013-03-27 8:49 ` Peter Zijlstra
2013-04-05 11:08 ` Vincent Guittot
2013-04-05 11:08 ` Vincent Guittot
2013-04-22 5:45 ` Preeti U Murthy
2013-04-22 5:45 ` Preeti U Murthy
[not found] ` <CAKfTPtCCCifC=c+xjjnAH_HSqkR80PiQoddQKXPHuZwZawbvcA@mail.gmail.com>
2013-04-23 2:23 ` Alex Shi
2013-04-23 2:23 ` Alex Shi
2013-04-23 4:57 ` Preeti U Murthy
2013-04-23 4:57 ` Preeti U Murthy
2013-04-23 15:30 ` Arjan van de Ven
2013-04-23 15:30 ` Arjan van de Ven
2013-04-26 10:54 ` Peter Zijlstra
2013-04-26 10:54 ` Peter Zijlstra
2013-04-23 4:36 ` Preeti U Murthy
2013-04-23 4:36 ` Preeti U Murthy
2013-03-22 12:25 ` [RFC PATCH v3 6/6] ARM: sched: clear SD_SHARE_POWERDOMAIN Vincent Guittot
2013-03-22 12:25 ` Vincent Guittot
2013-03-23 11:55 ` [RFC PATCH v3 0/6] sched: packing small tasks Preeti U Murthy
2013-03-23 11:55 ` Preeti U Murthy
2013-03-25 9:58 ` Vincent Guittot
2013-03-25 9:58 ` Vincent Guittot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364302359.5053.21.camel@laptop \
--to=peterz@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.