From: linux@prisktech.co.nz (Tony Prisk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] dts: vt8500: Update serial nodes and disable by default in SoC files
Date: Wed, 24 Apr 2013 17:38:22 +1200 [thread overview]
Message-ID: <1366781902-13025-4-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1366781902-13025-1-git-send-email-linux@prisktech.co.nz>
Missing aliases for uarts on vt8500, wm8505, wm8650 added.
Nodes incorrectly labelled uart at .., changed to serial at ... on all SoCs.
Set each uarts default status = "disabled" as they generally don't exist.
For each board file, we only need to enable uart0 as no other uarts are
physically present on any of these boards.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/vt8500-bv07.dts | 4 ++++
arch/arm/boot/dts/vt8500.dtsi | 19 +++++++++++++++----
arch/arm/boot/dts/wm8505-ref.dts | 4 ++++
arch/arm/boot/dts/wm8505.dtsi | 27 +++++++++++++++++++++------
arch/arm/boot/dts/wm8650-mid.dts | 4 ++++
arch/arm/boot/dts/wm8650.dtsi | 11 +++++++++--
arch/arm/boot/dts/wm8750-apc8750.dts | 4 ++++
arch/arm/boot/dts/wm8750.dtsi | 18 ++++++++++++------
arch/arm/boot/dts/wm8850-w70v2.dts | 4 ++++
arch/arm/boot/dts/wm8850.dtsi | 12 ++++++++----
10 files changed, 85 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts
index 567cf4e..faabc9c 100644
--- a/arch/arm/boot/dts/vt8500-bv07.dts
+++ b/arch/arm/boot/dts/vt8500-bv07.dts
@@ -34,3 +34,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index e35590e..4908222 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -21,6 +21,13 @@
};
};
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -121,32 +128,36 @@
reg = <0xd8050400 0x100>;
};
- uart at d8200000 {
+ uart0: serial at d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart at d82b0000 {
+ uart1: serial at d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart at d8210000 {
+ uart2: serial at d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart at d82c0000 {
+ uart3: serial at d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
rtc at d8100000 {
diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts
index fd4e248..acb996f 100644
--- a/arch/arm/boot/dts/wm8505-ref.dts
+++ b/arch/arm/boot/dts/wm8505-ref.dts
@@ -34,3 +34,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index dc21d13..e5076d5 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -21,6 +21,15 @@
};
};
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -144,46 +153,52 @@
reg = <0xd8050400 0x100>;
};
- uart at d8200000 {
+ uart0: serial at d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart at d82b0000 {
+ uart1: serial at d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart at d8210000 {
+ uart2: serial at d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart at d82c0000 {
+ uart3: serial at d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
- uart at d8370000 {
+ uart4: serial at d8370000 {
compatible = "via,vt8500-uart";
reg = <0xd8370000 0x1040>;
interrupts = <31>;
clocks = <&clkuart4>;
+ status = "disabled";
};
- uart at d8380000 {
+ uart5: serial at d8380000 {
compatible = "via,vt8500-uart";
reg = <0xd8380000 0x1040>;
interrupts = <30>;
clocks = <&clkuart5>;
+ status = "disabled";
};
rtc at d8100000 {
diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts
index cefd938..fec12f1 100644
--- a/arch/arm/boot/dts/wm8650-mid.dts
+++ b/arch/arm/boot/dts/wm8650-mid.dts
@@ -34,3 +34,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index f4cd55e..8e099a8 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -21,6 +21,11 @@
};
};
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -150,18 +155,20 @@
reg = <0xd8050400 0x100>;
};
- uart at d8200000 {
+ uart0: serial at d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart at d82b0000 {
+ uart1: serial at d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
rtc at d8100000 {
diff --git a/arch/arm/boot/dts/wm8750-apc8750.dts b/arch/arm/boot/dts/wm8750-apc8750.dts
index 62675eb..37e4a40 100644
--- a/arch/arm/boot/dts/wm8750-apc8750.dts
+++ b/arch/arm/boot/dts/wm8750-apc8750.dts
@@ -24,3 +24,7 @@
wm,pull = <2>; /* pull-up */
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi
index 81683fa..c048c04 100644
--- a/arch/arm/boot/dts/wm8750.dtsi
+++ b/arch/arm/boot/dts/wm8750.dtsi
@@ -273,46 +273,52 @@
interrupts = <26>;
};
- uart0: uart at d8200000 {
+ uart0: serial at d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart1: uart at d82b0000 {
+ uart1: serial at d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart2: uart at d8210000 {
+ uart2: serial at d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart3: uart at d82c0000 {
+ uart3: serial at d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
- uart4: uart at d8370000 {
+ uart4: serial at d8370000 {
compatible = "via,vt8500-uart";
reg = <0xd8370000 0x1040>;
interrupts = <30>;
clocks = <&clkuart4>;
+ status = "disabled";
};
- uart5: uart at d8380000 {
+ uart5: serial at d8380000 {
compatible = "via,vt8500-uart";
reg = <0xd8380000 0x1040>;
interrupts = <43>;
clocks = <&clkuart5>;
+ status = "disabled";
};
rtc at d8100000 {
diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts
index fcc660c..5b96ba2 100644
--- a/arch/arm/boot/dts/wm8850-w70v2.dts
+++ b/arch/arm/boot/dts/wm8850-w70v2.dts
@@ -45,3 +45,7 @@
default-brightness-level = <5>;
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index 4b56aa0..b5d36e1 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -189,32 +189,36 @@
interrupts = <26>;
};
- uart0: uart at d8200000 {
+ uart0: serial at d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart1: uart at d82b0000 {
+ uart1: serial at d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart2: uart at d8210000 {
+ uart2: serial at d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart3: uart at d82c0000 {
+ uart3: serial at d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
rtc at d8100000 {
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 3/3] dts: vt8500: Update serial nodes and disable by default in SoC files
Date: Wed, 24 Apr 2013 17:38:22 +1200 [thread overview]
Message-ID: <1366781902-13025-4-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1366781902-13025-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
Missing aliases for uarts on vt8500, wm8505, wm8650 added.
Nodes incorrectly labelled uart@.., changed to serial@... on all SoCs.
Set each uarts default status = "disabled" as they generally don't exist.
For each board file, we only need to enable uart0 as no other uarts are
physically present on any of these boards.
Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
arch/arm/boot/dts/vt8500-bv07.dts | 4 ++++
arch/arm/boot/dts/vt8500.dtsi | 19 +++++++++++++++----
arch/arm/boot/dts/wm8505-ref.dts | 4 ++++
arch/arm/boot/dts/wm8505.dtsi | 27 +++++++++++++++++++++------
arch/arm/boot/dts/wm8650-mid.dts | 4 ++++
arch/arm/boot/dts/wm8650.dtsi | 11 +++++++++--
arch/arm/boot/dts/wm8750-apc8750.dts | 4 ++++
arch/arm/boot/dts/wm8750.dtsi | 18 ++++++++++++------
arch/arm/boot/dts/wm8850-w70v2.dts | 4 ++++
arch/arm/boot/dts/wm8850.dtsi | 12 ++++++++----
10 files changed, 85 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts
index 567cf4e..faabc9c 100644
--- a/arch/arm/boot/dts/vt8500-bv07.dts
+++ b/arch/arm/boot/dts/vt8500-bv07.dts
@@ -34,3 +34,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index e35590e..4908222 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -21,6 +21,13 @@
};
};
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -121,32 +128,36 @@
reg = <0xd8050400 0x100>;
};
- uart@d8200000 {
+ uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart@d82b0000 {
+ uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart@d8210000 {
+ uart2: serial@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart@d82c0000 {
+ uart3: serial@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
rtc@d8100000 {
diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts
index fd4e248..acb996f 100644
--- a/arch/arm/boot/dts/wm8505-ref.dts
+++ b/arch/arm/boot/dts/wm8505-ref.dts
@@ -34,3 +34,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index dc21d13..e5076d5 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -21,6 +21,15 @@
};
};
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -144,46 +153,52 @@
reg = <0xd8050400 0x100>;
};
- uart@d8200000 {
+ uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart@d82b0000 {
+ uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart@d8210000 {
+ uart2: serial@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart@d82c0000 {
+ uart3: serial@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
- uart@d8370000 {
+ uart4: serial@d8370000 {
compatible = "via,vt8500-uart";
reg = <0xd8370000 0x1040>;
interrupts = <31>;
clocks = <&clkuart4>;
+ status = "disabled";
};
- uart@d8380000 {
+ uart5: serial@d8380000 {
compatible = "via,vt8500-uart";
reg = <0xd8380000 0x1040>;
interrupts = <30>;
clocks = <&clkuart5>;
+ status = "disabled";
};
rtc@d8100000 {
diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts
index cefd938..fec12f1 100644
--- a/arch/arm/boot/dts/wm8650-mid.dts
+++ b/arch/arm/boot/dts/wm8650-mid.dts
@@ -34,3 +34,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index f4cd55e..8e099a8 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -21,6 +21,11 @@
};
};
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -150,18 +155,20 @@
reg = <0xd8050400 0x100>;
};
- uart@d8200000 {
+ uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart@d82b0000 {
+ uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
rtc@d8100000 {
diff --git a/arch/arm/boot/dts/wm8750-apc8750.dts b/arch/arm/boot/dts/wm8750-apc8750.dts
index 62675eb..37e4a40 100644
--- a/arch/arm/boot/dts/wm8750-apc8750.dts
+++ b/arch/arm/boot/dts/wm8750-apc8750.dts
@@ -24,3 +24,7 @@
wm,pull = <2>; /* pull-up */
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi
index 81683fa..c048c04 100644
--- a/arch/arm/boot/dts/wm8750.dtsi
+++ b/arch/arm/boot/dts/wm8750.dtsi
@@ -273,46 +273,52 @@
interrupts = <26>;
};
- uart0: uart@d8200000 {
+ uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart1: uart@d82b0000 {
+ uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart2: uart@d8210000 {
+ uart2: serial@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart3: uart@d82c0000 {
+ uart3: serial@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
- uart4: uart@d8370000 {
+ uart4: serial@d8370000 {
compatible = "via,vt8500-uart";
reg = <0xd8370000 0x1040>;
interrupts = <30>;
clocks = <&clkuart4>;
+ status = "disabled";
};
- uart5: uart@d8380000 {
+ uart5: serial@d8380000 {
compatible = "via,vt8500-uart";
reg = <0xd8380000 0x1040>;
interrupts = <43>;
clocks = <&clkuart5>;
+ status = "disabled";
};
rtc@d8100000 {
diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts
index fcc660c..5b96ba2 100644
--- a/arch/arm/boot/dts/wm8850-w70v2.dts
+++ b/arch/arm/boot/dts/wm8850-w70v2.dts
@@ -45,3 +45,7 @@
default-brightness-level = <5>;
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index 4b56aa0..b5d36e1 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -189,32 +189,36 @@
interrupts = <26>;
};
- uart0: uart@d8200000 {
+ uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart1: uart@d82b0000 {
+ uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart2: uart@d8210000 {
+ uart2: serial@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart3: uart@d82c0000 {
+ uart3: serial@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
rtc@d8100000 {
--
1.7.9.5
next prev parent reply other threads:[~2013-04-24 5:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-24 5:38 [PATCH 0/3] dts: v8500: Cleanups for 3.10 Tony Prisk
2013-04-24 5:38 ` Tony Prisk
2013-04-24 5:38 ` [PATCH 1/3] dts: vt8500: Fix invalid/missing cpu nodes for soc files Tony Prisk
2013-04-24 5:38 ` Tony Prisk
2013-04-24 5:38 ` [PATCH 2/3] dts: vt8500: Add devicetree support for WM8750 SoC and APC8750 board Tony Prisk
2013-04-24 5:38 ` Tony Prisk
2013-04-24 5:38 ` Tony Prisk [this message]
2013-04-24 5:38 ` [PATCH 3/3] dts: vt8500: Update serial nodes and disable by default in SoC files Tony Prisk
2013-04-24 22:39 ` [PATCH 0/3] dts: v8500: Cleanups for 3.10 Tony Prisk
2013-04-24 22:39 ` Tony Prisk
2013-04-24 22:50 ` Olof Johansson
2013-04-24 22:50 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366781902-13025-4-git-send-email-linux@prisktech.co.nz \
--to=linux@prisktech.co.nz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.