From: linux@prisktech.co.nz (Tony Prisk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] dts: vt8500: Add devicetree support for WM8750 SoC and APC8750 board
Date: Wed, 24 Apr 2013 17:38:21 +1200 [thread overview]
Message-ID: <1366781902-13025-3-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1366781902-13025-1-git-send-email-linux@prisktech.co.nz>
This patch adds support for the WonderMedia WM8750 SoC and the VIA
APC8750 board.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/wm8750-apc8750.dts | 26 +++
arch/arm/boot/dts/wm8750.dtsi | 349 ++++++++++++++++++++++++++++++++++
3 files changed, 376 insertions(+)
create mode 100644 arch/arm/boot/dts/wm8750-apc8750.dts
create mode 100644 arch/arm/boot/dts/wm8750.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c62558..389536e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb \
+ wm8750-apc8750.dtb \
wm8850-w70v2.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
diff --git a/arch/arm/boot/dts/wm8750-apc8750.dts b/arch/arm/boot/dts/wm8750-apc8750.dts
new file mode 100644
index 0000000..62675eb
--- /dev/null
+++ b/arch/arm/boot/dts/wm8750-apc8750.dts
@@ -0,0 +1,26 @@
+/*
+ * wm8750-apc8750.dts
+ * - Device tree file for VIA APC8750
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8750.dtsi"
+
+/ {
+ model = "VIA APC8750";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c>;
+
+ i2c: i2c {
+ wm,pins = <168 169 170 171>;
+ wm,function = <2>; /* alt */
+ wm,pull = <2>; /* pull-up */
+ };
+};
diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi
new file mode 100644
index 0000000..81683fa
--- /dev/null
+++ b/arch/arm/boot/dts/wm8750.dtsi
@@ -0,0 +1,349 @@
+/*
+ * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "wm,wm8750";
+
+ cpus {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ cpu {
+ device_type = "cpu";
+ compatible = "arm,arm1176";
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+ interrupt-parent = <&intc0>;
+
+ intc0: interrupt-controller at d8140000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ reg = <0xd8140000 0x10000>;
+ #interrupt-cells = <1>;
+ };
+
+ /* Secondary IC cascaded to intc0 */
+ intc1: interrupt-controller at d8150000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xD8150000 0x10000>;
+ interrupts = <56 57 58 59 60 61 62 63>;
+ };
+
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8750-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pmc at d8130000 {
+ compatible = "via,vt8500-pmc";
+ reg = <0xd8130000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ref24: ref24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ ref25: ref25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ plla: plla {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x200>;
+ };
+
+ pllb: pllb {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x204>;
+ };
+
+ pllc: pllc {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x208>;
+ };
+
+ plld: plld {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x20C>;
+ };
+
+ plle: plle {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x210>;
+ };
+
+ clkarm: arm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plla>;
+ divisor-reg = <0x300>;
+ };
+
+ clkahb: ahb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x304>;
+ };
+
+ clkddr: ddr {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plld>;
+ divisor-reg = <0x310>;
+ };
+
+ clkuart0: uart0 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <24>;
+ };
+
+ clkuart1: uart1 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <25>;
+ };
+
+ clkuart2: uart2 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <26>;
+ };
+
+ clkuart3: uart3 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <27>;
+ };
+
+ clkuart4: uart4 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <28>;
+ };
+
+ clkuart5: uart5 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <29>;
+ };
+
+ clkpwm: pwm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x350>;
+ enable-reg = <0x250>;
+ enable-bit = <17>;
+ };
+
+ clksdhc: sdhc {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x330>;
+ divisor-mask = <0x3f>;
+ enable-reg = <0x250>;
+ enable-bit = <0>;
+ };
+
+ clksf: sf {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x314>;
+ enable-reg = <0x254>;
+ enable-bit = <23>;
+ };
+
+ clki2c0: i2c0clk {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x3A0>;
+ enable-reg = <0x250>;
+ enable-bit = <8>;
+ };
+
+ clki2c1: i2c1clk {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x3A4>;
+ enable-reg = <0x250>;
+ enable-bit = <9>;
+ };
+ };
+ };
+
+ sf at d8002000 {
+ compatible = "wm,wm8505-sf";
+ reg = <0xd8002000 0x400>;
+ clocks = <&clksf>;
+ };
+
+ pwm: pwm at d8220000 {
+ #pwm-cells = <3>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x100>;
+ clocks = <&clkpwm>;
+ };
+
+ timer at d8130100 {
+ compatible = "via,vt8500-timer";
+ reg = <0xd8130100 0x28>;
+ interrupts = <36>;
+ };
+
+ ehci at d8007900 {
+ compatible = "via,vt8500-ehci";
+ reg = <0xd8007900 0x200>;
+ interrupts = <26>;
+ };
+
+ uhci at d8007b00 {
+ compatible = "platform-uhci";
+ reg = <0xd8007b00 0x200>;
+ interrupts = <26>;
+ };
+
+ uhci at d8008d00 {
+ compatible = "platform-uhci";
+ reg = <0xd8008d00 0x200>;
+ interrupts = <26>;
+ };
+
+ uart0: uart at d8200000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8200000 0x1040>;
+ interrupts = <32>;
+ clocks = <&clkuart0>;
+ };
+
+ uart1: uart at d82b0000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd82b0000 0x1040>;
+ interrupts = <33>;
+ clocks = <&clkuart1>;
+ };
+
+ uart2: uart at d8210000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8210000 0x1040>;
+ interrupts = <47>;
+ clocks = <&clkuart2>;
+ };
+
+ uart3: uart at d82c0000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd82c0000 0x1040>;
+ interrupts = <50>;
+ clocks = <&clkuart3>;
+ };
+
+ uart4: uart at d8370000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8370000 0x1040>;
+ interrupts = <30>;
+ clocks = <&clkuart4>;
+ };
+
+ uart5: uart at d8380000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8380000 0x1040>;
+ interrupts = <43>;
+ clocks = <&clkuart5>;
+ };
+
+ rtc at d8100000 {
+ compatible = "via,vt8500-rtc";
+ reg = <0xd8100000 0x10000>;
+ interrupts = <48>;
+ };
+
+ sdhc at d800a000 {
+ compatible = "wm,wm8505-sdhc";
+ reg = <0xd800a000 0x1000>;
+ interrupts = <20 21>;
+ clocks = <&clksdhc>;
+ bus-width = <4>;
+ sdon-inverted;
+ };
+
+ i2c_0: i2c at d8280000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8280000 0x1000>;
+ interrupts = <19>;
+ clocks = <&clki2c0>;
+ clock-frequency = <400000>;
+ };
+
+ i2c_1: i2c at d8320000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8320000 0x1000>;
+ interrupts = <18>;
+ clocks = <&clki2c1>;
+ clock-frequency = <400000>;
+ };
+ };
+};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 2/3] dts: vt8500: Add devicetree support for WM8750 SoC and APC8750 board
Date: Wed, 24 Apr 2013 17:38:21 +1200 [thread overview]
Message-ID: <1366781902-13025-3-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1366781902-13025-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
This patch adds support for the WonderMedia WM8750 SoC and the VIA
APC8750 board.
Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/wm8750-apc8750.dts | 26 +++
arch/arm/boot/dts/wm8750.dtsi | 349 ++++++++++++++++++++++++++++++++++
3 files changed, 376 insertions(+)
create mode 100644 arch/arm/boot/dts/wm8750-apc8750.dts
create mode 100644 arch/arm/boot/dts/wm8750.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c62558..389536e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb \
+ wm8750-apc8750.dtb \
wm8850-w70v2.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
diff --git a/arch/arm/boot/dts/wm8750-apc8750.dts b/arch/arm/boot/dts/wm8750-apc8750.dts
new file mode 100644
index 0000000..62675eb
--- /dev/null
+++ b/arch/arm/boot/dts/wm8750-apc8750.dts
@@ -0,0 +1,26 @@
+/*
+ * wm8750-apc8750.dts
+ * - Device tree file for VIA APC8750
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8750.dtsi"
+
+/ {
+ model = "VIA APC8750";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c>;
+
+ i2c: i2c {
+ wm,pins = <168 169 170 171>;
+ wm,function = <2>; /* alt */
+ wm,pull = <2>; /* pull-up */
+ };
+};
diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi
new file mode 100644
index 0000000..81683fa
--- /dev/null
+++ b/arch/arm/boot/dts/wm8750.dtsi
@@ -0,0 +1,349 @@
+/*
+ * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "wm,wm8750";
+
+ cpus {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ cpu {
+ device_type = "cpu";
+ compatible = "arm,arm1176";
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+ interrupt-parent = <&intc0>;
+
+ intc0: interrupt-controller@d8140000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ reg = <0xd8140000 0x10000>;
+ #interrupt-cells = <1>;
+ };
+
+ /* Secondary IC cascaded to intc0 */
+ intc1: interrupt-controller@d8150000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xD8150000 0x10000>;
+ interrupts = <56 57 58 59 60 61 62 63>;
+ };
+
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8750-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pmc@d8130000 {
+ compatible = "via,vt8500-pmc";
+ reg = <0xd8130000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ref24: ref24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ ref25: ref25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ plla: plla {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x200>;
+ };
+
+ pllb: pllb {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x204>;
+ };
+
+ pllc: pllc {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x208>;
+ };
+
+ plld: plld {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x20C>;
+ };
+
+ plle: plle {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x210>;
+ };
+
+ clkarm: arm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plla>;
+ divisor-reg = <0x300>;
+ };
+
+ clkahb: ahb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x304>;
+ };
+
+ clkddr: ddr {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plld>;
+ divisor-reg = <0x310>;
+ };
+
+ clkuart0: uart0 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <24>;
+ };
+
+ clkuart1: uart1 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <25>;
+ };
+
+ clkuart2: uart2 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <26>;
+ };
+
+ clkuart3: uart3 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <27>;
+ };
+
+ clkuart4: uart4 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <28>;
+ };
+
+ clkuart5: uart5 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <29>;
+ };
+
+ clkpwm: pwm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x350>;
+ enable-reg = <0x250>;
+ enable-bit = <17>;
+ };
+
+ clksdhc: sdhc {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x330>;
+ divisor-mask = <0x3f>;
+ enable-reg = <0x250>;
+ enable-bit = <0>;
+ };
+
+ clksf: sf {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x314>;
+ enable-reg = <0x254>;
+ enable-bit = <23>;
+ };
+
+ clki2c0: i2c0clk {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x3A0>;
+ enable-reg = <0x250>;
+ enable-bit = <8>;
+ };
+
+ clki2c1: i2c1clk {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x3A4>;
+ enable-reg = <0x250>;
+ enable-bit = <9>;
+ };
+ };
+ };
+
+ sf@d8002000 {
+ compatible = "wm,wm8505-sf";
+ reg = <0xd8002000 0x400>;
+ clocks = <&clksf>;
+ };
+
+ pwm: pwm@d8220000 {
+ #pwm-cells = <3>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x100>;
+ clocks = <&clkpwm>;
+ };
+
+ timer@d8130100 {
+ compatible = "via,vt8500-timer";
+ reg = <0xd8130100 0x28>;
+ interrupts = <36>;
+ };
+
+ ehci@d8007900 {
+ compatible = "via,vt8500-ehci";
+ reg = <0xd8007900 0x200>;
+ interrupts = <26>;
+ };
+
+ uhci@d8007b00 {
+ compatible = "platform-uhci";
+ reg = <0xd8007b00 0x200>;
+ interrupts = <26>;
+ };
+
+ uhci@d8008d00 {
+ compatible = "platform-uhci";
+ reg = <0xd8008d00 0x200>;
+ interrupts = <26>;
+ };
+
+ uart0: uart@d8200000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8200000 0x1040>;
+ interrupts = <32>;
+ clocks = <&clkuart0>;
+ };
+
+ uart1: uart@d82b0000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd82b0000 0x1040>;
+ interrupts = <33>;
+ clocks = <&clkuart1>;
+ };
+
+ uart2: uart@d8210000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8210000 0x1040>;
+ interrupts = <47>;
+ clocks = <&clkuart2>;
+ };
+
+ uart3: uart@d82c0000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd82c0000 0x1040>;
+ interrupts = <50>;
+ clocks = <&clkuart3>;
+ };
+
+ uart4: uart@d8370000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8370000 0x1040>;
+ interrupts = <30>;
+ clocks = <&clkuart4>;
+ };
+
+ uart5: uart@d8380000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8380000 0x1040>;
+ interrupts = <43>;
+ clocks = <&clkuart5>;
+ };
+
+ rtc@d8100000 {
+ compatible = "via,vt8500-rtc";
+ reg = <0xd8100000 0x10000>;
+ interrupts = <48>;
+ };
+
+ sdhc@d800a000 {
+ compatible = "wm,wm8505-sdhc";
+ reg = <0xd800a000 0x1000>;
+ interrupts = <20 21>;
+ clocks = <&clksdhc>;
+ bus-width = <4>;
+ sdon-inverted;
+ };
+
+ i2c_0: i2c@d8280000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8280000 0x1000>;
+ interrupts = <19>;
+ clocks = <&clki2c0>;
+ clock-frequency = <400000>;
+ };
+
+ i2c_1: i2c@d8320000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8320000 0x1000>;
+ interrupts = <18>;
+ clocks = <&clki2c1>;
+ clock-frequency = <400000>;
+ };
+ };
+};
--
1.7.9.5
next prev parent reply other threads:[~2013-04-24 5:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-24 5:38 [PATCH 0/3] dts: v8500: Cleanups for 3.10 Tony Prisk
2013-04-24 5:38 ` Tony Prisk
2013-04-24 5:38 ` [PATCH 1/3] dts: vt8500: Fix invalid/missing cpu nodes for soc files Tony Prisk
2013-04-24 5:38 ` Tony Prisk
2013-04-24 5:38 ` Tony Prisk [this message]
2013-04-24 5:38 ` [PATCH 2/3] dts: vt8500: Add devicetree support for WM8750 SoC and APC8750 board Tony Prisk
2013-04-24 5:38 ` [PATCH 3/3] dts: vt8500: Update serial nodes and disable by default in SoC files Tony Prisk
2013-04-24 5:38 ` Tony Prisk
2013-04-24 22:39 ` [PATCH 0/3] dts: v8500: Cleanups for 3.10 Tony Prisk
2013-04-24 22:39 ` Tony Prisk
2013-04-24 22:50 ` Olof Johansson
2013-04-24 22:50 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366781902-13025-3-git-send-email-linux@prisktech.co.nz \
--to=linux@prisktech.co.nz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.