* [RFC PATCH] arm64: Add arch support for PCI [not found] <1382529163-31968-1-git-send-email-tinamdar@apm.com> @ 2013-10-23 12:39 ` Catalin Marinas 0 siblings, 0 replies; 8+ messages in thread From: Catalin Marinas @ 2013-10-23 12:39 UTC (permalink / raw) To: linux-arm-kernel Hi Tanmay, On Wed, 2013-10-23 at 12:52 +0100, Tanmay Inamdar wrote: > This patch adds the PCI arch support in arm64 required by PCI > midlayer. The PCI support is based on support in 32bit arm arch. We had a discussion yesterday at the ARM mini-summit in Edinburgh about PCI(e) support on ARMv8. Rather than creating yet another implementation, there is a lot of code in there which is not arch specific and should rather be generalised. There are still some debates around whether to make the powerpc one generic (and it seems to have some advantages in terms of DT handling) or making parts of the AArch32 implementation generic. ARM started looking into this but we don't yet have code to share. Catalin ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [RFC PATCH] arm64: Add arch support for PCI @ 2013-10-23 12:39 ` Catalin Marinas 0 siblings, 0 replies; 8+ messages in thread From: Catalin Marinas @ 2013-10-23 12:39 UTC (permalink / raw) To: Tanmay Inamdar Cc: Will Deacon, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Hi Tanmay, On Wed, 2013-10-23 at 12:52 +0100, Tanmay Inamdar wrote: > This patch adds the PCI arch support in arm64 required by PCI > midlayer. The PCI support is based on support in 32bit arm arch. We had a discussion yesterday at the ARM mini-summit in Edinburgh about PCI(e) support on ARMv8. Rather than creating yet another implementation, there is a lot of code in there which is not arch specific and should rather be generalised. There are still some debates around whether to make the powerpc one generic (and it seems to have some advantages in terms of DT handling) or making parts of the AArch32 implementation generic. ARM started looking into this but we don't yet have code to share. Catalin ^ permalink raw reply [flat|nested] 8+ messages in thread
* [RFC PATCH] arm64: Add arch support for PCI 2013-10-23 12:39 ` Catalin Marinas @ 2013-11-21 13:38 ` Tanmay Inamdar -1 siblings, 0 replies; 8+ messages in thread From: Tanmay Inamdar @ 2013-11-21 13:38 UTC (permalink / raw) To: linux-arm-kernel On Wed, Oct 23, 2013 at 6:09 PM, Catalin Marinas <catalin.marinas@arm.com> wrote: > Hi Tanmay, > > On Wed, 2013-10-23 at 12:52 +0100, Tanmay Inamdar wrote: >> This patch adds the PCI arch support in arm64 required by PCI >> midlayer. The PCI support is based on support in 32bit arm arch. > > We had a discussion yesterday at the ARM mini-summit in Edinburgh about > PCI(e) support on ARMv8. Rather than creating yet another > implementation, there is a lot of code in there which is not arch > specific and should rather be generalised. There are still some debates > around whether to make the powerpc one generic (and it seems to have > some advantages in terms of DT handling) or making parts of the AArch32 > implementation generic. ARM started looking into this but we don't yet > have code to share. > Thanks for your reply. It looks like my first email missed the mailing list. Just pasting it for the reference. Sorry for the inconvenience. --> This patch adds the PCI(e) arch support in arm64. The files are based on PCI(e) support in 32bit arm. Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> --- arch/arm64/Kconfig | 19 ++ arch/arm64/include/asm/dma.h | 18 + arch/arm64/include/asm/pci.h | 74 ++++ arch/arm64/include/asm/pcibios.h | 98 ++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/pcibios.c | 689 ++++++++++++++++++++++++++++++++++++++ arch/arm64/mm/Makefile | 2 +- arch/arm64/mm/iomap.c | 31 ++ drivers/pci/Makefile | 1 + 9 files changed, 932 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/include/asm/dma.h create mode 100644 arch/arm64/include/asm/pci.h create mode 100644 arch/arm64/include/asm/pcibios.h create mode 100644 arch/arm64/kernel/pcibios.c create mode 100644 arch/arm64/mm/iomap.c diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index c044548..54ffa0e 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -115,6 +115,8 @@ config ARCH_VEXPRESS Express). config ARCH_XGENE + select PCI + select NO_GENERIC_PCI_IOPORT_MAP bool "AppliedMicro X-Gene SOC Family" help This enables support for AppliedMicro X-Gene SOC Family @@ -126,6 +128,23 @@ menu "Bus support" config ARM_AMBA bool +config PCI + bool "PCI support" + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + +config PCI_DOMAINS + bool + depends on PCI + +config PCI_SYSCALL + def_bool PCI + +source "drivers/pci/Kconfig" + endmenu menu "Kernel Features"index 0000000..810a408 --- /dev/null +++ b/arch/arm64/kernel/pcibios.c @@ -0,0 +1,689 @@+/* + * We don't use this to fix the device, but initialisation of it. + * It's not the correct use for this, but it works. + * Note that the arbiter/ISA bridge appears to be buggy, specifically in + * the following area: + * 1. park on CPU + * 2. ISA bridge ping-pong + * 3. ISA bridge master handling of target RETRY + * + * Bug 3 is responsible for the sound DMA grinding to a halt. We now + * live with bug 2. + */ +static void pci_fixup_83c553(struct pci_dev *dev) +{ + /* + * Set memory region to start at address 0, and enable IO + */ + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + PCI_BASE_ADDRESS_SPACE_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO); + + dev->resource[0].end -= dev->resource[0].start; + dev->resource[0].start = 0; + + /* + * All memory requests from ISA to be channelled to PCI + */ + pci_write_config_byte(dev, 0x48, 0xff); + + /* + * Enable ping-pong on bus master to ISA bridge transactions. + * This improves the sound DMA substantially. The fixed + * priority arbiter also helps (see below). + */ + pci_write_config_byte(dev, 0x42, 0x01); + + /* + * Enable PCI retry + */ + pci_write_config_byte(dev, 0x40, 0x22); + + /* + * We used to set the arbiter to "park on last master" (bit + * 1 set), but unfortunately the CyberPro does not park the + * bus. We must therefore park on CPU. Unfortunately, this + * may trigger yet another bug in the 553. + */ + pci_write_config_byte(dev, 0x83, 0x02); + + /* + * Make the ISA DMA request lowest priority, and disable + * rotating priorities completely. + */ + pci_write_config_byte(dev, 0x80, 0x11); + pci_write_config_byte(dev, 0x81, 0x00); + + /* + * Route INTA input to IRQ 11, and set IRQ11 to be level + * sensitive. + */ + pci_write_config_word(dev, 0x44, 0xb000); + outb(0x08, 0x4d1); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, + pci_fixup_83c553);+/* + * The CY82C693 needs some rather major fixups to ensure that it does + * the right thing. Idea from the Alpha people, with a few additions. + * + * We ensure that the IDE base registers are set to 1f0/3f4 for the + * primary bus, and 170/374 for the secondary bus. Also, hide them + * from the PCI subsystem view as well so we won't try to perform + * our own auto-configuration on them. + * + * In addition, we ensure that the PCI IDE interrupts are routed to + * IRQ 14 and IRQ 15 respectively. + * + * The above gets us to a point where the IDE on this device is + * functional. However, The CY82C693U _does not work_ in bus + * master mode without locking the PCI bus solid. + */ +static void pci_fixup_cy82c693(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + u32 base0, base1; + + if (dev->class & 0x80) { /* primary */ + base0 = 0x1f0; + base1 = 0x3f4; + } else { /* secondary */ + base0 = 0x170; + base1 = 0x374; + } + + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + base0 | PCI_BASE_ADDRESS_SPACE_IO); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, + base1 | PCI_BASE_ADDRESS_SPACE_IO); + + dev->resource[0].start = 0; + dev->resource[0].end = 0; + dev->resource[0].flags = 0; + + dev->resource[1].start = 0; + dev->resource[1].end = 0; + dev->resource[1].flags = 0; + } else if (PCI_FUNC(dev->devfn) == 0) { + /* + * Setup IDE IRQ routing. + */ + pci_write_config_byte(dev, 0x4b, 14); + pci_write_config_byte(dev, 0x4c, 15); + + /* + * Disable FREQACK handshake, enable USB. + */ + pci_write_config_byte(dev, 0x4d, 0x41); + + /* + * Enable PCI retry, and PCI post-write buffer. + */ + pci_write_config_byte(dev, 0x44, 0x17); + + /* + * Enable ISA master and DMA post write buffering. + */ + pci_write_config_byte(dev, 0x45, 0x03); + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, + pci_fixup_cy82c693);index 0000000..42585c6 --- /dev/null +++ b/arch/arm64/mm/iomap.c @@ -0,0 +1,31 @@ +/* + * Based on linux/arch/arm/mm/iomap.c + * + * Map IO port and PCI memory spaces so that {read,write}[bwl] can + * be used to access this memory. + */ +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/io.h> + +#ifdef __io +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return __io(port); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ +} +EXPORT_SYMBOL(ioport_unmap); +#endif + +#ifdef CONFIG_PCI +unsigned long pcibios_min_io = 0x1000; +EXPORT_SYMBOL(pcibios_min_io); + +unsigned long pcibios_min_mem = 0x01000000; +EXPORT_SYMBOL(pcibios_min_mem); +#endif diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 6ebf5bf..0f3f821 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_MICROBLAZE) += setup-bus.o obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o obj-$(CONFIG_SPARC_LEON) += setup-bus.o setup-irq.o obj-$(CONFIG_M68K) += setup-bus.o setup-irq.o +obj-$(CONFIG_ARM64) += setup-bus.o setup-irq.o # # ACPI Related PCI FW Functions > Catalin > ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [RFC PATCH] arm64: Add arch support for PCI @ 2013-11-21 13:38 ` Tanmay Inamdar 0 siblings, 0 replies; 8+ messages in thread From: Tanmay Inamdar @ 2013-11-21 13:38 UTC (permalink / raw) To: Catalin Marinas Cc: Will Deacon, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org On Wed, Oct 23, 2013 at 6:09 PM, Catalin Marinas <catalin.marinas@arm.com> wrote: > Hi Tanmay, > > On Wed, 2013-10-23 at 12:52 +0100, Tanmay Inamdar wrote: >> This patch adds the PCI arch support in arm64 required by PCI >> midlayer. The PCI support is based on support in 32bit arm arch. > > We had a discussion yesterday at the ARM mini-summit in Edinburgh about > PCI(e) support on ARMv8. Rather than creating yet another > implementation, there is a lot of code in there which is not arch > specific and should rather be generalised. There are still some debates > around whether to make the powerpc one generic (and it seems to have > some advantages in terms of DT handling) or making parts of the AArch32 > implementation generic. ARM started looking into this but we don't yet > have code to share. > Thanks for your reply. It looks like my first email missed the mailing list. Just pasting it for the reference. Sorry for the inconvenience. --> This patch adds the PCI(e) arch support in arm64. The files are based on PCI(e) support in 32bit arm. Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> --- arch/arm64/Kconfig | 19 ++ arch/arm64/include/asm/dma.h | 18 + arch/arm64/include/asm/pci.h | 74 ++++ arch/arm64/include/asm/pcibios.h | 98 ++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/pcibios.c | 689 ++++++++++++++++++++++++++++++++++++++ arch/arm64/mm/Makefile | 2 +- arch/arm64/mm/iomap.c | 31 ++ drivers/pci/Makefile | 1 + 9 files changed, 932 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/include/asm/dma.h create mode 100644 arch/arm64/include/asm/pci.h create mode 100644 arch/arm64/include/asm/pcibios.h create mode 100644 arch/arm64/kernel/pcibios.c create mode 100644 arch/arm64/mm/iomap.c diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index c044548..54ffa0e 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -115,6 +115,8 @@ config ARCH_VEXPRESS Express). config ARCH_XGENE + select PCI + select NO_GENERIC_PCI_IOPORT_MAP bool "AppliedMicro X-Gene SOC Family" help This enables support for AppliedMicro X-Gene SOC Family @@ -126,6 +128,23 @@ menu "Bus support" config ARM_AMBA bool +config PCI + bool "PCI support" + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + +config PCI_DOMAINS + bool + depends on PCI + +config PCI_SYSCALL + def_bool PCI + +source "drivers/pci/Kconfig" + endmenu menu "Kernel Features"index 0000000..810a408 --- /dev/null +++ b/arch/arm64/kernel/pcibios.c @@ -0,0 +1,689 @@+/* + * We don't use this to fix the device, but initialisation of it. + * It's not the correct use for this, but it works. + * Note that the arbiter/ISA bridge appears to be buggy, specifically in + * the following area: + * 1. park on CPU + * 2. ISA bridge ping-pong + * 3. ISA bridge master handling of target RETRY + * + * Bug 3 is responsible for the sound DMA grinding to a halt. We now + * live with bug 2. + */ +static void pci_fixup_83c553(struct pci_dev *dev) +{ + /* + * Set memory region to start at address 0, and enable IO + */ + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + PCI_BASE_ADDRESS_SPACE_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO); + + dev->resource[0].end -= dev->resource[0].start; + dev->resource[0].start = 0; + + /* + * All memory requests from ISA to be channelled to PCI + */ + pci_write_config_byte(dev, 0x48, 0xff); + + /* + * Enable ping-pong on bus master to ISA bridge transactions. + * This improves the sound DMA substantially. The fixed + * priority arbiter also helps (see below). + */ + pci_write_config_byte(dev, 0x42, 0x01); + + /* + * Enable PCI retry + */ + pci_write_config_byte(dev, 0x40, 0x22); + + /* + * We used to set the arbiter to "park on last master" (bit + * 1 set), but unfortunately the CyberPro does not park the + * bus. We must therefore park on CPU. Unfortunately, this + * may trigger yet another bug in the 553. + */ + pci_write_config_byte(dev, 0x83, 0x02); + + /* + * Make the ISA DMA request lowest priority, and disable + * rotating priorities completely. + */ + pci_write_config_byte(dev, 0x80, 0x11); + pci_write_config_byte(dev, 0x81, 0x00); + + /* + * Route INTA input to IRQ 11, and set IRQ11 to be level + * sensitive. + */ + pci_write_config_word(dev, 0x44, 0xb000); + outb(0x08, 0x4d1); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, + pci_fixup_83c553);+/* + * The CY82C693 needs some rather major fixups to ensure that it does + * the right thing. Idea from the Alpha people, with a few additions. + * + * We ensure that the IDE base registers are set to 1f0/3f4 for the + * primary bus, and 170/374 for the secondary bus. Also, hide them + * from the PCI subsystem view as well so we won't try to perform + * our own auto-configuration on them. + * + * In addition, we ensure that the PCI IDE interrupts are routed to + * IRQ 14 and IRQ 15 respectively. + * + * The above gets us to a point where the IDE on this device is + * functional. However, The CY82C693U _does not work_ in bus + * master mode without locking the PCI bus solid. + */ +static void pci_fixup_cy82c693(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + u32 base0, base1; + + if (dev->class & 0x80) { /* primary */ + base0 = 0x1f0; + base1 = 0x3f4; + } else { /* secondary */ + base0 = 0x170; + base1 = 0x374; + } + + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + base0 | PCI_BASE_ADDRESS_SPACE_IO); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, + base1 | PCI_BASE_ADDRESS_SPACE_IO); + + dev->resource[0].start = 0; + dev->resource[0].end = 0; + dev->resource[0].flags = 0; + + dev->resource[1].start = 0; + dev->resource[1].end = 0; + dev->resource[1].flags = 0; + } else if (PCI_FUNC(dev->devfn) == 0) { + /* + * Setup IDE IRQ routing. + */ + pci_write_config_byte(dev, 0x4b, 14); + pci_write_config_byte(dev, 0x4c, 15); + + /* + * Disable FREQACK handshake, enable USB. + */ + pci_write_config_byte(dev, 0x4d, 0x41); + + /* + * Enable PCI retry, and PCI post-write buffer. + */ + pci_write_config_byte(dev, 0x44, 0x17); + + /* + * Enable ISA master and DMA post write buffering. + */ + pci_write_config_byte(dev, 0x45, 0x03); + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, + pci_fixup_cy82c693);index 0000000..42585c6 --- /dev/null +++ b/arch/arm64/mm/iomap.c @@ -0,0 +1,31 @@ +/* + * Based on linux/arch/arm/mm/iomap.c + * + * Map IO port and PCI memory spaces so that {read,write}[bwl] can + * be used to access this memory. + */ +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/io.h> + +#ifdef __io +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return __io(port); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ +} +EXPORT_SYMBOL(ioport_unmap); +#endif + +#ifdef CONFIG_PCI +unsigned long pcibios_min_io = 0x1000; +EXPORT_SYMBOL(pcibios_min_io); + +unsigned long pcibios_min_mem = 0x01000000; +EXPORT_SYMBOL(pcibios_min_mem); +#endif diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 6ebf5bf..0f3f821 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_MICROBLAZE) += setup-bus.o obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o obj-$(CONFIG_SPARC_LEON) += setup-bus.o setup-irq.o obj-$(CONFIG_M68K) += setup-bus.o setup-irq.o +obj-$(CONFIG_ARM64) += setup-bus.o setup-irq.o # # ACPI Related PCI FW Functions > Catalin > ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [RFC PATCH] arm64: Add arch support for PCI 2013-11-21 13:38 ` Tanmay Inamdar @ 2014-05-21 18:57 ` Kumar Gala -1 siblings, 0 replies; 8+ messages in thread From: Kumar Gala @ 2014-05-21 18:57 UTC (permalink / raw) To: linux-arm-kernel On Nov 21, 2013, at 7:38 AM, Tanmay Inamdar <tinamdar@apm.com> wrote: > This patch adds the PCI(e) arch support in arm64. The files are > based on PCI(e) support in 32bit arm. > > > Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> > --- > arch/arm64/Kconfig | 19 ++ > arch/arm64/include/asm/dma.h | 18 + > arch/arm64/include/asm/pci.h | 74 ++++ > arch/arm64/include/asm/pcibios.h | 98 ++++++ > arch/arm64/kernel/Makefile | 1 + > arch/arm64/kernel/pcibios.c | 689 ++++++++++++++++++++++++++++++++++++++ > arch/arm64/mm/Makefile | 2 +- > arch/arm64/mm/iomap.c | 31 ++ > drivers/pci/Makefile | 1 + > 9 files changed, 932 insertions(+), 1 deletion(-) > > create mode 100644 arch/arm64/include/asm/dma.h > create mode 100644 arch/arm64/include/asm/pci.h > create mode 100644 arch/arm64/include/asm/pcibios.h > create mode 100644 arch/arm64/kernel/pcibios.c > create mode 100644 arch/arm64/mm/iomap.c Do you mind reposting this, the version I can find on mailing list archives seems corrupt. This is at least useful until we get something merged upstream for arm64 pci work. thanks - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [RFC PATCH] arm64: Add arch support for PCI @ 2014-05-21 18:57 ` Kumar Gala 0 siblings, 0 replies; 8+ messages in thread From: Kumar Gala @ 2014-05-21 18:57 UTC (permalink / raw) To: Tanmay Inamdar Cc: Catalin Marinas, Will Deacon, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org On Nov 21, 2013, at 7:38 AM, Tanmay Inamdar <tinamdar@apm.com> wrote: > This patch adds the PCI(e) arch support in arm64. The files are > based on PCI(e) support in 32bit arm. > > > Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> > --- > arch/arm64/Kconfig | 19 ++ > arch/arm64/include/asm/dma.h | 18 + > arch/arm64/include/asm/pci.h | 74 ++++ > arch/arm64/include/asm/pcibios.h | 98 ++++++ > arch/arm64/kernel/Makefile | 1 + > arch/arm64/kernel/pcibios.c | 689 ++++++++++++++++++++++++++++++++++++++ > arch/arm64/mm/Makefile | 2 +- > arch/arm64/mm/iomap.c | 31 ++ > drivers/pci/Makefile | 1 + > 9 files changed, 932 insertions(+), 1 deletion(-) > > create mode 100644 arch/arm64/include/asm/dma.h > create mode 100644 arch/arm64/include/asm/pci.h > create mode 100644 arch/arm64/include/asm/pcibios.h > create mode 100644 arch/arm64/kernel/pcibios.c > create mode 100644 arch/arm64/mm/iomap.c Do you mind reposting this, the version I can find on mailing list archives seems corrupt. This is at least useful until we get something merged upstream for arm64 pci work. thanks - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply [flat|nested] 8+ messages in thread
* [RFC PATCH] arm64: Add arch support for PCI 2014-05-21 18:57 ` Kumar Gala @ 2014-07-02 17:54 ` Tanmay Inamdar -1 siblings, 0 replies; 8+ messages in thread From: Tanmay Inamdar @ 2014-07-02 17:54 UTC (permalink / raw) To: linux-arm-kernel On Wed, May 21, 2014 at 11:57 AM, Kumar Gala <galak@codeaurora.org> wrote: > > On Nov 21, 2013, at 7:38 AM, Tanmay Inamdar <tinamdar@apm.com> wrote: > >> This patch adds the PCI(e) arch support in arm64. The files are >> based on PCI(e) support in 32bit arm. >> >> >> Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> >> --- >> arch/arm64/Kconfig | 19 ++ >> arch/arm64/include/asm/dma.h | 18 + >> arch/arm64/include/asm/pci.h | 74 ++++ >> arch/arm64/include/asm/pcibios.h | 98 ++++++ >> arch/arm64/kernel/Makefile | 1 + >> arch/arm64/kernel/pcibios.c | 689 ++++++++++++++++++++++++++++++++++++++ >> arch/arm64/mm/Makefile | 2 +- >> arch/arm64/mm/iomap.c | 31 ++ >> drivers/pci/Makefile | 1 + >> 9 files changed, 932 insertions(+), 1 deletion(-) >> >> create mode 100644 arch/arm64/include/asm/dma.h >> create mode 100644 arch/arm64/include/asm/pci.h >> create mode 100644 arch/arm64/include/asm/pcibios.h >> create mode 100644 arch/arm64/kernel/pcibios.c >> create mode 100644 arch/arm64/mm/iomap.c > > Do you mind reposting this, the version I can find on mailing list archives seems corrupt. This is at least useful until we get something merged upstream for arm64 pci work. Sure. I have a patch that applies to 3.13 Linux Kernel. I will post that out. > > thanks > > - k > > > -- > Employee of Qualcomm Innovation Center, Inc. > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [RFC PATCH] arm64: Add arch support for PCI @ 2014-07-02 17:54 ` Tanmay Inamdar 0 siblings, 0 replies; 8+ messages in thread From: Tanmay Inamdar @ 2014-07-02 17:54 UTC (permalink / raw) To: Kumar Gala Cc: Catalin Marinas, Will Deacon, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org On Wed, May 21, 2014 at 11:57 AM, Kumar Gala <galak@codeaurora.org> wrote: > > On Nov 21, 2013, at 7:38 AM, Tanmay Inamdar <tinamdar@apm.com> wrote: > >> This patch adds the PCI(e) arch support in arm64. The files are >> based on PCI(e) support in 32bit arm. >> >> >> Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> >> --- >> arch/arm64/Kconfig | 19 ++ >> arch/arm64/include/asm/dma.h | 18 + >> arch/arm64/include/asm/pci.h | 74 ++++ >> arch/arm64/include/asm/pcibios.h | 98 ++++++ >> arch/arm64/kernel/Makefile | 1 + >> arch/arm64/kernel/pcibios.c | 689 ++++++++++++++++++++++++++++++++++++++ >> arch/arm64/mm/Makefile | 2 +- >> arch/arm64/mm/iomap.c | 31 ++ >> drivers/pci/Makefile | 1 + >> 9 files changed, 932 insertions(+), 1 deletion(-) >> >> create mode 100644 arch/arm64/include/asm/dma.h >> create mode 100644 arch/arm64/include/asm/pci.h >> create mode 100644 arch/arm64/include/asm/pcibios.h >> create mode 100644 arch/arm64/kernel/pcibios.c >> create mode 100644 arch/arm64/mm/iomap.c > > Do you mind reposting this, the version I can find on mailing list archives seems corrupt. This is at least useful until we get something merged upstream for arm64 pci work. Sure. I have a patch that applies to 3.13 Linux Kernel. I will post that out. > > thanks > > - k > > > -- > Employee of Qualcomm Innovation Center, Inc. > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation > ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-07-02 18:00 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1382529163-31968-1-git-send-email-tinamdar@apm.com>
2013-10-23 12:39 ` [RFC PATCH] arm64: Add arch support for PCI Catalin Marinas
2013-10-23 12:39 ` Catalin Marinas
2013-11-21 13:38 ` Tanmay Inamdar
2013-11-21 13:38 ` Tanmay Inamdar
2014-05-21 18:57 ` Kumar Gala
2014-05-21 18:57 ` Kumar Gala
2014-07-02 17:54 ` Tanmay Inamdar
2014-07-02 17:54 ` Tanmay Inamdar
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.