All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>
Cc: linux-arm-msm@vger.kernel.org,
	Saravana Kannan <skannan@codeaurora.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 02/14] clk: Add set_rate_and_parent() op
Date: Wed, 15 Jan 2014 10:47:22 -0800	[thread overview]
Message-ID: <1389811654-21397-3-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1389811654-21397-1-git-send-email-sboyd@codeaurora.org>

Some of Qualcomm's clocks can change their parent and rate at the
same time with a single register write. Add support for this
hardware to the common clock framework by adding a new
set_rate_and_parent() op. When the clock framework determines
that both the parent and the rate are going to change during
clk_set_rate() it will call the .set_rate_and_parent() op if
available and fall back to calling .set_parent() followed by
.set_rate() otherwise.

Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 Documentation/clk.txt        |  3 ++
 drivers/clk/clk.c            | 78 +++++++++++++++++++++++++++++++++-----------
 include/linux/clk-provider.h | 15 +++++++++
 3 files changed, 77 insertions(+), 19 deletions(-)

diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 3aeb5c440442..79700eab821d 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -77,6 +77,9 @@ the operations defined in clk.h:
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
 		int		(*set_rate)(struct clk_hw *hw, unsigned long);
+		int		(*set_rate_and_parent)(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long parent_rate, u8 index);
 		void		(*init)(struct clk_hw *hw);
 	};
 
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9ad7b71b641f..0b27b543dacf 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1129,10 +1129,9 @@ static void clk_reparent(struct clk *clk, struct clk *new_parent)
 	clk->parent = new_parent;
 }
 
-static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+static struct clk *__clk_set_parent_before(struct clk *clk, struct clk *parent)
 {
 	unsigned long flags;
-	int ret = 0;
 	struct clk *old_parent = clk->parent;
 
 	/*
@@ -1163,6 +1162,34 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 	clk_reparent(clk, parent);
 	clk_enable_unlock(flags);
 
+	return old_parent;
+}
+
+static void __clk_set_parent_after(struct clk *clk, struct clk *parent,
+		struct clk *old_parent)
+{
+	/*
+	 * Finish the migration of prepare state and undo the changes done
+	 * for preventing a race with clk_enable().
+	 */
+	if (clk->prepare_count) {
+		clk_disable(clk);
+		clk_disable(old_parent);
+		__clk_unprepare(old_parent);
+	}
+
+	/* update debugfs with new clk tree topology */
+	clk_debug_reparent(clk, parent);
+}
+
+static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+{
+	unsigned long flags;
+	int ret = 0;
+	struct clk *old_parent;
+
+	old_parent = __clk_set_parent_before(clk, parent);
+
 	/* change clock input source */
 	if (parent && clk->ops->set_parent)
 		ret = clk->ops->set_parent(clk->hw, p_index);
@@ -1180,18 +1207,8 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 		return ret;
 	}
 
-	/*
-	 * Finish the migration of prepare state and undo the changes done
-	 * for preventing a race with clk_enable().
-	 */
-	if (clk->prepare_count) {
-		clk_disable(clk);
-		clk_disable(old_parent);
-		__clk_unprepare(old_parent);
-	}
+	__clk_set_parent_after(clk, parent, old_parent);
 
-	/* update debugfs with new clk tree topology */
-	clk_debug_reparent(clk, parent);
 	return 0;
 }
 
@@ -1376,17 +1393,32 @@ static void clk_change_rate(struct clk *clk)
 	struct clk *child;
 	unsigned long old_rate;
 	unsigned long best_parent_rate = 0;
+	bool skip_set_rate = false;
+	struct clk *old_parent;
 
 	old_rate = clk->rate;
 
-	/* set parent */
-	if (clk->new_parent && clk->new_parent != clk->parent)
-		__clk_set_parent(clk, clk->new_parent, clk->new_parent_index);
-
-	if (clk->parent)
+	if (clk->new_parent)
+		best_parent_rate = clk->new_parent->rate;
+	else if (clk->parent)
 		best_parent_rate = clk->parent->rate;
 
-	if (clk->ops->set_rate)
+	if (clk->new_parent && clk->new_parent != clk->parent) {
+		old_parent = __clk_set_parent_before(clk, clk->new_parent);
+
+		if (clk->ops->set_rate_and_parent) {
+			skip_set_rate = true;
+			clk->ops->set_rate_and_parent(clk->hw, clk->new_rate,
+					best_parent_rate,
+					clk->new_parent_index);
+		} else if (clk->ops->set_parent) {
+			clk->ops->set_parent(clk->hw, clk->new_parent_index);
+		}
+
+		__clk_set_parent_after(clk, clk->new_parent, old_parent);
+	}
+
+	if (!skip_set_rate && clk->ops->set_rate)
 		clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
 
 	if (clk->ops->recalc_rate)
@@ -1678,6 +1710,14 @@ int __clk_init(struct device *dev, struct clk *clk)
 		goto out;
 	}
 
+	if (clk->ops->set_rate_and_parent &&
+			!(clk->ops->set_parent && clk->ops->set_rate)) {
+		pr_warn("%s: %s must implement .set_parent & .set_rate\n",
+				__func__, clk->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
 	/* throw a WARN if any entries in parent_names are NULL */
 	for (i = 0; i < clk->num_parents; i++)
 		WARN(!clk->parent_names[i],
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7e59253b8603..a944222a43df 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -108,6 +108,18 @@ struct clk_hw;
  *		which is likely helpful for most .set_rate implementation.
  *		Returns 0 on success, -EERROR otherwise.
  *
+ * @set_rate_and_parent: Change the rate and the parent of this clock. The
+ *		requested rate is specified by the second argument, which
+ *		should typically be the return of .round_rate call.  The
+ *		third argument gives the parent rate which is likely helpful
+ *		for most .set_rate_and_parent implementation. The fourth
+ *		argument gives the parent index. This callback is optional (and
+ *		unnecessary) for clocks with 0 or 1 parents as well as
+ *		for clocks that can tolerate switching the rate and the parent
+ *		separately via calls to .set_parent and .set_rate.
+ *		Returns 0 on success, -EERROR otherwise.
+ *
+ *
  * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
  * implementations to split any work between atomic (enable) and sleepable
  * (prepare) contexts.  If enabling a clock requires code that might sleep,
@@ -139,6 +151,9 @@ struct clk_ops {
 	u8		(*get_parent)(struct clk_hw *hw);
 	int		(*set_rate)(struct clk_hw *hw, unsigned long,
 				    unsigned long);
+	int		(*set_rate_and_parent)(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate, u8 index);
 	void		(*init)(struct clk_hw *hw);
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 02/14] clk: Add set_rate_and_parent() op
Date: Wed, 15 Jan 2014 10:47:22 -0800	[thread overview]
Message-ID: <1389811654-21397-3-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1389811654-21397-1-git-send-email-sboyd@codeaurora.org>

Some of Qualcomm's clocks can change their parent and rate at the
same time with a single register write. Add support for this
hardware to the common clock framework by adding a new
set_rate_and_parent() op. When the clock framework determines
that both the parent and the rate are going to change during
clk_set_rate() it will call the .set_rate_and_parent() op if
available and fall back to calling .set_parent() followed by
.set_rate() otherwise.

Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 Documentation/clk.txt        |  3 ++
 drivers/clk/clk.c            | 78 +++++++++++++++++++++++++++++++++-----------
 include/linux/clk-provider.h | 15 +++++++++
 3 files changed, 77 insertions(+), 19 deletions(-)

diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 3aeb5c440442..79700eab821d 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -77,6 +77,9 @@ the operations defined in clk.h:
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
 		int		(*set_rate)(struct clk_hw *hw, unsigned long);
+		int		(*set_rate_and_parent)(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long parent_rate, u8 index);
 		void		(*init)(struct clk_hw *hw);
 	};
 
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9ad7b71b641f..0b27b543dacf 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1129,10 +1129,9 @@ static void clk_reparent(struct clk *clk, struct clk *new_parent)
 	clk->parent = new_parent;
 }
 
-static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+static struct clk *__clk_set_parent_before(struct clk *clk, struct clk *parent)
 {
 	unsigned long flags;
-	int ret = 0;
 	struct clk *old_parent = clk->parent;
 
 	/*
@@ -1163,6 +1162,34 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 	clk_reparent(clk, parent);
 	clk_enable_unlock(flags);
 
+	return old_parent;
+}
+
+static void __clk_set_parent_after(struct clk *clk, struct clk *parent,
+		struct clk *old_parent)
+{
+	/*
+	 * Finish the migration of prepare state and undo the changes done
+	 * for preventing a race with clk_enable().
+	 */
+	if (clk->prepare_count) {
+		clk_disable(clk);
+		clk_disable(old_parent);
+		__clk_unprepare(old_parent);
+	}
+
+	/* update debugfs with new clk tree topology */
+	clk_debug_reparent(clk, parent);
+}
+
+static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+{
+	unsigned long flags;
+	int ret = 0;
+	struct clk *old_parent;
+
+	old_parent = __clk_set_parent_before(clk, parent);
+
 	/* change clock input source */
 	if (parent && clk->ops->set_parent)
 		ret = clk->ops->set_parent(clk->hw, p_index);
@@ -1180,18 +1207,8 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 		return ret;
 	}
 
-	/*
-	 * Finish the migration of prepare state and undo the changes done
-	 * for preventing a race with clk_enable().
-	 */
-	if (clk->prepare_count) {
-		clk_disable(clk);
-		clk_disable(old_parent);
-		__clk_unprepare(old_parent);
-	}
+	__clk_set_parent_after(clk, parent, old_parent);
 
-	/* update debugfs with new clk tree topology */
-	clk_debug_reparent(clk, parent);
 	return 0;
 }
 
@@ -1376,17 +1393,32 @@ static void clk_change_rate(struct clk *clk)
 	struct clk *child;
 	unsigned long old_rate;
 	unsigned long best_parent_rate = 0;
+	bool skip_set_rate = false;
+	struct clk *old_parent;
 
 	old_rate = clk->rate;
 
-	/* set parent */
-	if (clk->new_parent && clk->new_parent != clk->parent)
-		__clk_set_parent(clk, clk->new_parent, clk->new_parent_index);
-
-	if (clk->parent)
+	if (clk->new_parent)
+		best_parent_rate = clk->new_parent->rate;
+	else if (clk->parent)
 		best_parent_rate = clk->parent->rate;
 
-	if (clk->ops->set_rate)
+	if (clk->new_parent && clk->new_parent != clk->parent) {
+		old_parent = __clk_set_parent_before(clk, clk->new_parent);
+
+		if (clk->ops->set_rate_and_parent) {
+			skip_set_rate = true;
+			clk->ops->set_rate_and_parent(clk->hw, clk->new_rate,
+					best_parent_rate,
+					clk->new_parent_index);
+		} else if (clk->ops->set_parent) {
+			clk->ops->set_parent(clk->hw, clk->new_parent_index);
+		}
+
+		__clk_set_parent_after(clk, clk->new_parent, old_parent);
+	}
+
+	if (!skip_set_rate && clk->ops->set_rate)
 		clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
 
 	if (clk->ops->recalc_rate)
@@ -1678,6 +1710,14 @@ int __clk_init(struct device *dev, struct clk *clk)
 		goto out;
 	}
 
+	if (clk->ops->set_rate_and_parent &&
+			!(clk->ops->set_parent && clk->ops->set_rate)) {
+		pr_warn("%s: %s must implement .set_parent & .set_rate\n",
+				__func__, clk->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
 	/* throw a WARN if any entries in parent_names are NULL */
 	for (i = 0; i < clk->num_parents; i++)
 		WARN(!clk->parent_names[i],
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7e59253b8603..a944222a43df 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -108,6 +108,18 @@ struct clk_hw;
  *		which is likely helpful for most .set_rate implementation.
  *		Returns 0 on success, -EERROR otherwise.
  *
+ * @set_rate_and_parent: Change the rate and the parent of this clock. The
+ *		requested rate is specified by the second argument, which
+ *		should typically be the return of .round_rate call.  The
+ *		third argument gives the parent rate which is likely helpful
+ *		for most .set_rate_and_parent implementation. The fourth
+ *		argument gives the parent index. This callback is optional (and
+ *		unnecessary) for clocks with 0 or 1 parents as well as
+ *		for clocks that can tolerate switching the rate and the parent
+ *		separately via calls to .set_parent and .set_rate.
+ *		Returns 0 on success, -EERROR otherwise.
+ *
+ *
  * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
  * implementations to split any work between atomic (enable) and sleepable
  * (prepare) contexts.  If enabling a clock requires code that might sleep,
@@ -139,6 +151,9 @@ struct clk_ops {
 	u8		(*get_parent)(struct clk_hw *hw);
 	int		(*set_rate)(struct clk_hw *hw, unsigned long,
 				    unsigned long);
+	int		(*set_rate_and_parent)(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate, u8 index);
 	void		(*init)(struct clk_hw *hw);
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Saravana Kannan <skannan@codeaurora.org>
Subject: [PATCH v5 02/14] clk: Add set_rate_and_parent() op
Date: Wed, 15 Jan 2014 10:47:22 -0800	[thread overview]
Message-ID: <1389811654-21397-3-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1389811654-21397-1-git-send-email-sboyd@codeaurora.org>

Some of Qualcomm's clocks can change their parent and rate at the
same time with a single register write. Add support for this
hardware to the common clock framework by adding a new
set_rate_and_parent() op. When the clock framework determines
that both the parent and the rate are going to change during
clk_set_rate() it will call the .set_rate_and_parent() op if
available and fall back to calling .set_parent() followed by
.set_rate() otherwise.

Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 Documentation/clk.txt        |  3 ++
 drivers/clk/clk.c            | 78 +++++++++++++++++++++++++++++++++-----------
 include/linux/clk-provider.h | 15 +++++++++
 3 files changed, 77 insertions(+), 19 deletions(-)

diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 3aeb5c440442..79700eab821d 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -77,6 +77,9 @@ the operations defined in clk.h:
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
 		int		(*set_rate)(struct clk_hw *hw, unsigned long);
+		int		(*set_rate_and_parent)(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long parent_rate, u8 index);
 		void		(*init)(struct clk_hw *hw);
 	};
 
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9ad7b71b641f..0b27b543dacf 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1129,10 +1129,9 @@ static void clk_reparent(struct clk *clk, struct clk *new_parent)
 	clk->parent = new_parent;
 }
 
-static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+static struct clk *__clk_set_parent_before(struct clk *clk, struct clk *parent)
 {
 	unsigned long flags;
-	int ret = 0;
 	struct clk *old_parent = clk->parent;
 
 	/*
@@ -1163,6 +1162,34 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 	clk_reparent(clk, parent);
 	clk_enable_unlock(flags);
 
+	return old_parent;
+}
+
+static void __clk_set_parent_after(struct clk *clk, struct clk *parent,
+		struct clk *old_parent)
+{
+	/*
+	 * Finish the migration of prepare state and undo the changes done
+	 * for preventing a race with clk_enable().
+	 */
+	if (clk->prepare_count) {
+		clk_disable(clk);
+		clk_disable(old_parent);
+		__clk_unprepare(old_parent);
+	}
+
+	/* update debugfs with new clk tree topology */
+	clk_debug_reparent(clk, parent);
+}
+
+static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+{
+	unsigned long flags;
+	int ret = 0;
+	struct clk *old_parent;
+
+	old_parent = __clk_set_parent_before(clk, parent);
+
 	/* change clock input source */
 	if (parent && clk->ops->set_parent)
 		ret = clk->ops->set_parent(clk->hw, p_index);
@@ -1180,18 +1207,8 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 		return ret;
 	}
 
-	/*
-	 * Finish the migration of prepare state and undo the changes done
-	 * for preventing a race with clk_enable().
-	 */
-	if (clk->prepare_count) {
-		clk_disable(clk);
-		clk_disable(old_parent);
-		__clk_unprepare(old_parent);
-	}
+	__clk_set_parent_after(clk, parent, old_parent);
 
-	/* update debugfs with new clk tree topology */
-	clk_debug_reparent(clk, parent);
 	return 0;
 }
 
@@ -1376,17 +1393,32 @@ static void clk_change_rate(struct clk *clk)
 	struct clk *child;
 	unsigned long old_rate;
 	unsigned long best_parent_rate = 0;
+	bool skip_set_rate = false;
+	struct clk *old_parent;
 
 	old_rate = clk->rate;
 
-	/* set parent */
-	if (clk->new_parent && clk->new_parent != clk->parent)
-		__clk_set_parent(clk, clk->new_parent, clk->new_parent_index);
-
-	if (clk->parent)
+	if (clk->new_parent)
+		best_parent_rate = clk->new_parent->rate;
+	else if (clk->parent)
 		best_parent_rate = clk->parent->rate;
 
-	if (clk->ops->set_rate)
+	if (clk->new_parent && clk->new_parent != clk->parent) {
+		old_parent = __clk_set_parent_before(clk, clk->new_parent);
+
+		if (clk->ops->set_rate_and_parent) {
+			skip_set_rate = true;
+			clk->ops->set_rate_and_parent(clk->hw, clk->new_rate,
+					best_parent_rate,
+					clk->new_parent_index);
+		} else if (clk->ops->set_parent) {
+			clk->ops->set_parent(clk->hw, clk->new_parent_index);
+		}
+
+		__clk_set_parent_after(clk, clk->new_parent, old_parent);
+	}
+
+	if (!skip_set_rate && clk->ops->set_rate)
 		clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
 
 	if (clk->ops->recalc_rate)
@@ -1678,6 +1710,14 @@ int __clk_init(struct device *dev, struct clk *clk)
 		goto out;
 	}
 
+	if (clk->ops->set_rate_and_parent &&
+			!(clk->ops->set_parent && clk->ops->set_rate)) {
+		pr_warn("%s: %s must implement .set_parent & .set_rate\n",
+				__func__, clk->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
 	/* throw a WARN if any entries in parent_names are NULL */
 	for (i = 0; i < clk->num_parents; i++)
 		WARN(!clk->parent_names[i],
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7e59253b8603..a944222a43df 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -108,6 +108,18 @@ struct clk_hw;
  *		which is likely helpful for most .set_rate implementation.
  *		Returns 0 on success, -EERROR otherwise.
  *
+ * @set_rate_and_parent: Change the rate and the parent of this clock. The
+ *		requested rate is specified by the second argument, which
+ *		should typically be the return of .round_rate call.  The
+ *		third argument gives the parent rate which is likely helpful
+ *		for most .set_rate_and_parent implementation. The fourth
+ *		argument gives the parent index. This callback is optional (and
+ *		unnecessary) for clocks with 0 or 1 parents as well as
+ *		for clocks that can tolerate switching the rate and the parent
+ *		separately via calls to .set_parent and .set_rate.
+ *		Returns 0 on success, -EERROR otherwise.
+ *
+ *
  * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
  * implementations to split any work between atomic (enable) and sleepable
  * (prepare) contexts.  If enabling a clock requires code that might sleep,
@@ -139,6 +151,9 @@ struct clk_ops {
 	u8		(*get_parent)(struct clk_hw *hw);
 	int		(*set_rate)(struct clk_hw *hw, unsigned long,
 				    unsigned long);
+	int		(*set_rate_and_parent)(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate, u8 index);
 	void		(*init)(struct clk_hw *hw);
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation


  parent reply	other threads:[~2014-01-15 18:47 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-15 18:47 [PATCH v5 00/14] Add support for MSM's mmio clock/reset controller Stephen Boyd
2014-01-15 18:47 ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 01/14] reset: Silence warning in reset-controller.h Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` Stephen Boyd [this message]
2014-01-15 18:47   ` [PATCH v5 02/14] clk: Add set_rate_and_parent() op Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 03/14] clk: qcom: Add a regmap type clock struct Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 04/14] clk: qcom: Add support for phase locked loops (PLLs) Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 05/14] clk: qcom: Add support for root clock generators (RCGs) Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 06/14] clk: qcom: Add support for branches/gate clocks Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 07/14] clk: qcom: Add reset controller support Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 08/14] clk: qcom: Add support for MSM8960's global clock controller (GCC) Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 09/14] clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC) Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 10/14] clk: qcom: Add support for MSM8974's global clock controller (GCC) Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 11/14] clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC) Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 12/14] clk: qcom: Add support for MSM8660's global clock controller (GCC) Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47 ` [PATCH v5 13/14] devicetree: bindings: Document qcom,gcc Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
2014-01-15 18:47   ` Stephen Boyd
     [not found] ` <1389811654-21397-1-git-send-email-sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2014-01-15 18:47   ` [PATCH v5 14/14] devicetree: bindings: Document qcom,mmcc Stephen Boyd
2014-01-15 18:47     ` Stephen Boyd
2014-01-15 18:47     ` Stephen Boyd
2014-01-16 19:28 ` [PATCH v5 00/14] Add support for MSM's mmio clock/reset controller Mike Turquette
2014-01-16 19:28   ` Mike Turquette
2014-02-07  4:15 ` Frank Rowand
2014-02-07  4:15   ` Frank Rowand
2014-02-07  4:32   ` Frank Rowand
2014-02-07  4:32     ` Frank Rowand
2014-02-07  5:11   ` Joe Perches
2014-02-07  5:11     ` Joe Perches
2014-02-07 19:38     ` Frank Rowand
2014-02-07 19:38       ` Frank Rowand
2014-02-07 19:38       ` Frank Rowand
2014-02-07 20:51       ` Joe Perches
2014-02-07 20:51         ` Joe Perches
2014-02-07 23:36         ` Frank Rowand
2014-02-07 23:36           ` Frank Rowand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389811654-21397-3-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=skannan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.