From: "Nguyễn Thái Ngọc Duy" <pclouds@gmail.com>
To: git@vger.kernel.org
Cc: "Nguyễn Thái Ngọc Duy" <pclouds@gmail.com>
Subject: [PATCH 3/4] Stop using fnmatch (either native or compat)
Date: Sat, 15 Feb 2014 09:01:48 +0700 [thread overview]
Message-ID: <1392429709-9237-4-git-send-email-pclouds@gmail.com> (raw)
In-Reply-To: <1392429709-9237-1-git-send-email-pclouds@gmail.com>
Since v1.8.4 (about six months ago) wildmatch is used as default
replacement for fnmatch. We have seen only one fix since so wildmatch
probably has done a good job as fnmatch replacement. This concludes
the fnmatch->wildmatch transition by no longer relying on fnmatch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
---
Makefile | 22 ----------------------
config.mak.uname | 10 ----------
configure.ac | 28 ----------------------------
git-compat-util.h | 12 ------------
t/t3070-wildmatch.sh | 13 -------------
test-wildmatch.c | 6 ------
6 files changed, 91 deletions(-)
diff --git a/Makefile b/Makefile
index dddaf4f..ca38f99 100644
--- a/Makefile
+++ b/Makefile
@@ -101,14 +101,6 @@ all::
#
# Define NO_MKSTEMPS if you don't have mkstemps in the C library.
#
-# Define NO_FNMATCH if you don't have fnmatch in the C library.
-#
-# Define NO_FNMATCH_CASEFOLD if your fnmatch function doesn't have the
-# FNM_CASEFOLD GNU extension.
-#
-# Define NO_WILDMATCH if you do not want to use Git's wildmatch
-# implementation as fnmatch
-#
# Define NO_GECOS_IN_PWENT if you don't have pw_gecos in struct passwd
# in the C library.
#
@@ -1271,20 +1263,6 @@ endif
ifdef NO_STRTOULL
COMPAT_CFLAGS += -DNO_STRTOULL
endif
-ifdef NO_FNMATCH
- COMPAT_CFLAGS += -Icompat/fnmatch
- COMPAT_CFLAGS += -DNO_FNMATCH
- COMPAT_OBJS += compat/fnmatch/fnmatch.o
-else
-ifdef NO_FNMATCH_CASEFOLD
- COMPAT_CFLAGS += -Icompat/fnmatch
- COMPAT_CFLAGS += -DNO_FNMATCH_CASEFOLD
- COMPAT_OBJS += compat/fnmatch/fnmatch.o
-endif
-endif
-ifndef NO_WILDMATCH
- COMPAT_CFLAGS += -DUSE_WILDMATCH
-endif
ifdef NO_SETENV
COMPAT_CFLAGS += -DNO_SETENV
COMPAT_OBJS += compat/setenv.o
diff --git a/config.mak.uname b/config.mak.uname
index 7d31fad..6069a44 100644
--- a/config.mak.uname
+++ b/config.mak.uname
@@ -108,7 +108,6 @@ ifeq ($(uname_S),SunOS)
NO_MKDTEMP = YesPlease
NO_MKSTEMPS = YesPlease
NO_REGEX = YesPlease
- NO_FNMATCH_CASEFOLD = YesPlease
NO_MSGFMT_EXTENDED_OPTIONS = YesPlease
HAVE_DEV_TTY = YesPlease
ifeq ($(uname_R),5.6)
@@ -259,7 +258,6 @@ ifeq ($(uname_S),IRIX)
# issue, comment out the NO_MMAP statement.
NO_MMAP = YesPlease
NO_REGEX = YesPlease
- NO_FNMATCH_CASEFOLD = YesPlease
SNPRINTF_RETURNS_BOGUS = YesPlease
SHELL_PATH = /usr/gnu/bin/bash
NEEDS_LIBGEN = YesPlease
@@ -279,7 +277,6 @@ ifeq ($(uname_S),IRIX64)
# issue, comment out the NO_MMAP statement.
NO_MMAP = YesPlease
NO_REGEX = YesPlease
- NO_FNMATCH_CASEFOLD = YesPlease
SNPRINTF_RETURNS_BOGUS = YesPlease
SHELL_PATH = /usr/gnu/bin/bash
NEEDS_LIBGEN = YesPlease
@@ -296,7 +293,6 @@ ifeq ($(uname_S),HP-UX)
NO_UNSETENV = YesPlease
NO_HSTRERROR = YesPlease
NO_SYS_SELECT_H = YesPlease
- NO_FNMATCH_CASEFOLD = YesPlease
SNPRINTF_RETURNS_BOGUS = YesPlease
NO_NSEC = YesPlease
ifeq ($(uname_R),B.11.00)
@@ -327,7 +323,6 @@ ifeq ($(uname_S),Windows)
NO_UNSETENV = YesPlease
NO_STRCASESTR = YesPlease
NO_STRLCPY = YesPlease
- NO_FNMATCH = YesPlease
NO_MEMMEM = YesPlease
# NEEDS_LIBICONV = YesPlease
NO_ICONV = YesPlease
@@ -389,13 +384,11 @@ ifeq ($(uname_S),Interix)
NO_INET_NTOP = YesPlease
NO_INET_PTON = YesPlease
NO_SOCKADDR_STORAGE = YesPlease
- NO_FNMATCH_CASEFOLD = YesPlease
endif
ifeq ($(uname_R),5.2)
NO_INET_NTOP = YesPlease
NO_INET_PTON = YesPlease
NO_SOCKADDR_STORAGE = YesPlease
- NO_FNMATCH_CASEFOLD = YesPlease
endif
endif
ifeq ($(uname_S),Minix)
@@ -440,7 +433,6 @@ ifeq ($(uname_S),NONSTOP_KERNEL)
NO_D_TYPE_IN_DIRENT = YesPlease
NO_HSTRERROR = YesPlease
NO_STRCASESTR = YesPlease
- NO_FNMATCH_CASEFOLD = YesPlease
NO_MEMMEM = YesPlease
NO_STRLCPY = YesPlease
NO_SETENV = YesPlease
@@ -484,7 +476,6 @@ ifneq (,$(findstring MINGW,$(uname_S)))
NO_UNSETENV = YesPlease
NO_STRCASESTR = YesPlease
NO_STRLCPY = YesPlease
- NO_FNMATCH = YesPlease
NO_MEMMEM = YesPlease
NEEDS_LIBICONV = YesPlease
NO_STRTOUMAX = YesPlease
@@ -538,7 +529,6 @@ ifeq ($(uname_S),QNX)
EXPAT_NEEDS_XMLPARSE_H = YesPlease
HAVE_STRINGS_H = YesPlease
NEEDS_SOCKET = YesPlease
- NO_FNMATCH_CASEFOLD = YesPlease
NO_GETPAGESIZE = YesPlease
NO_ICONV = YesPlease
NO_MEMMEM = YesPlease
diff --git a/configure.ac b/configure.ac
index 2f43393..24ab738 100644
--- a/configure.ac
+++ b/configure.ac
@@ -901,34 +901,6 @@ GIT_CHECK_FUNC(strcasestr,
[NO_STRCASESTR=YesPlease])
GIT_CONF_SUBST([NO_STRCASESTR])
#
-# Define NO_FNMATCH if you don't have fnmatch
-GIT_CHECK_FUNC(fnmatch,
-[NO_FNMATCH=],
-[NO_FNMATCH=YesPlease])
-GIT_CONF_SUBST([NO_FNMATCH])
-#
-# Define NO_FNMATCH_CASEFOLD if your fnmatch function doesn't have the
-# FNM_CASEFOLD GNU extension.
-AC_CACHE_CHECK([whether the fnmatch function supports the FNMATCH_CASEFOLD GNU extension],
- [ac_cv_c_excellent_fnmatch], [
-AC_EGREP_CPP(yippeeyeswehaveit,
- AC_LANG_PROGRAM([
-#include <fnmatch.h>
-],
-[#ifdef FNM_CASEFOLD
-yippeeyeswehaveit
-#endif
-]),
- [ac_cv_c_excellent_fnmatch=yes],
- [ac_cv_c_excellent_fnmatch=no])
-])
-if test $ac_cv_c_excellent_fnmatch = yes; then
- NO_FNMATCH_CASEFOLD=
-else
- NO_FNMATCH_CASEFOLD=YesPlease
-fi
-GIT_CONF_SUBST([NO_FNMATCH_CASEFOLD])
-#
# Define NO_MEMMEM if you don't have memmem.
GIT_CHECK_FUNC(memmem,
[NO_MEMMEM=],
diff --git a/git-compat-util.h b/git-compat-util.h
index cbd86c3..eaee438 100644
--- a/git-compat-util.h
+++ b/git-compat-util.h
@@ -116,9 +116,6 @@
#include <sys/time.h>
#include <time.h>
#include <signal.h>
-#ifndef USE_WILDMATCH
-#include <fnmatch.h>
-#endif
#include <assert.h>
#include <regex.h>
#include <utime.h>
@@ -304,16 +301,7 @@ extern char *gitbasename(char *);
#include "compat/bswap.h"
-#ifdef USE_WILDMATCH
#include "wildmatch.h"
-#define FNM_PATHNAME WM_PATHNAME
-#define FNM_CASEFOLD WM_CASEFOLD
-#define FNM_NOMATCH WM_NOMATCH
-static inline int fnmatch(const char *pattern, const char *string, int flags)
-{
- return wildmatch(pattern, string, flags, NULL);
-}
-#endif
/* General helper functions */
extern void vreportf(const char *prefix, const char *err, va_list params);
diff --git a/t/t3070-wildmatch.sh b/t/t3070-wildmatch.sh
index 38446a0..ef509df 100755
--- a/t/t3070-wildmatch.sh
+++ b/t/t3070-wildmatch.sh
@@ -14,19 +14,6 @@ match() {
! test-wildmatch wildmatch '$3' '$4'
"
fi
- if [ $2 = 1 ]; then
- test_expect_success "fnmatch: match '$3' '$4'" "
- test-wildmatch fnmatch '$3' '$4'
- "
- elif [ $2 = 0 ]; then
- test_expect_success "fnmatch: no match '$3' '$4'" "
- ! test-wildmatch fnmatch '$3' '$4'
- "
-# else
-# test_expect_success BROKEN_FNMATCH "fnmatch: '$3' '$4'" "
-# ! test-wildmatch fnmatch '$3' '$4'
-# "
- fi
}
imatch() {
diff --git a/test-wildmatch.c b/test-wildmatch.c
index 1564bd5..578b164 100644
--- a/test-wildmatch.c
+++ b/test-wildmatch.c
@@ -1,8 +1,4 @@
-#ifdef USE_WILDMATCH
-#undef USE_WILDMATCH /* We need real fnmatch implementation here */
-#endif
#include "cache.h"
-#include "wildmatch.h"
int main(int argc, char **argv)
{
@@ -20,8 +16,6 @@ int main(int argc, char **argv)
return !!wildmatch(argv[3], argv[2], WM_PATHNAME | WM_CASEFOLD, NULL);
else if (!strcmp(argv[1], "pathmatch"))
return !!wildmatch(argv[3], argv[2], 0, NULL);
- else if (!strcmp(argv[1], "fnmatch"))
- return !!fnmatch(argv[3], argv[2], FNM_PATHNAME);
else
return 1;
}
--
1.8.5.2.240.g8478abd
next prev parent reply other threads:[~2014-02-15 2:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-15 2:01 [PATCH 0/4] Good bye fnmatch Nguyễn Thái Ngọc Duy
2014-02-15 2:01 ` [PATCH 1/4] Use wildmatch() directly without fnmatch() wrapper Nguyễn Thái Ngọc Duy
2014-02-15 2:01 ` [PATCH 2/4] Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch" Nguyễn Thái Ngọc Duy
2014-02-15 2:01 ` Nguyễn Thái Ngọc Duy [this message]
2014-02-15 2:01 ` [PATCH 4/4] Actually remove compat fnmatch source code Nguyễn Thái Ngọc Duy
2014-02-15 8:23 ` [PATCH 0/4] Good bye fnmatch David Kastrup
2014-02-15 8:29 ` Duy Nguyen
2014-02-15 8:49 ` David Kastrup
2014-02-18 19:28 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392429709-9237-4-git-send-email-pclouds@gmail.com \
--to=pclouds@gmail.com \
--cc=git@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.