From: Roger Quadros <rogerq@ti.com>
To: kishon@ti.com, tony@atomide.com, balbi@ti.com
Cc: george.cherian@ti.com, balajitk@ti.com, hdegoede@redhat.com,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-usb@vger.kernel.org, linux-ide@vger.kernel.org,
rogerq@ti.com
Subject: [PATCH v2 09/13] phy: omap: Depend on OMAP_OCP2SCP bus driver
Date: Thu, 6 Mar 2014 16:38:45 +0200 [thread overview]
Message-ID: <1394116729-28811-10-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1394116729-28811-1-git-send-email-rogerq@ti.com>
The OMAP_USB2 and OMAP_PIPE3 PHY devices will not be
detected if the OMAP_OCP2SCP bus driver is not present.
Make them depend on it.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/phy/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index fe8c009..2aead8b 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -47,6 +47,7 @@ config OMAP_USB2
depends on USB_PHY
select GENERIC_PHY
select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
@@ -58,6 +59,7 @@ config TI_PIPE3
depends on ARCH_OMAP2PLUS || COMPILE_TEST
select GENERIC_PHY
select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
help
Enable this to support the PIPE3 PHY that is part of TI SOCs. This
driver takes care of all the PHY functionality apart from comparator.
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 09/13] phy: omap: Depend on OMAP_OCP2SCP bus driver
Date: Thu, 6 Mar 2014 16:38:45 +0200 [thread overview]
Message-ID: <1394116729-28811-10-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1394116729-28811-1-git-send-email-rogerq@ti.com>
The OMAP_USB2 and OMAP_PIPE3 PHY devices will not be
detected if the OMAP_OCP2SCP bus driver is not present.
Make them depend on it.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/phy/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index fe8c009..2aead8b 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -47,6 +47,7 @@ config OMAP_USB2
depends on USB_PHY
select GENERIC_PHY
select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
@@ -58,6 +59,7 @@ config TI_PIPE3
depends on ARCH_OMAP2PLUS || COMPILE_TEST
select GENERIC_PHY
select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
help
Enable this to support the PIPE3 PHY that is part of TI SOCs. This
driver takes care of all the PHY functionality apart from comparator.
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: <kishon@ti.com>, <tony@atomide.com>, <balbi@ti.com>
Cc: <george.cherian@ti.com>, <balajitk@ti.com>, <hdegoede@redhat.com>,
<linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-usb@vger.kernel.org>, <linux-ide@vger.kernel.org>,
<rogerq@ti.com>
Subject: [PATCH v2 09/13] phy: omap: Depend on OMAP_OCP2SCP bus driver
Date: Thu, 6 Mar 2014 16:38:45 +0200 [thread overview]
Message-ID: <1394116729-28811-10-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1394116729-28811-1-git-send-email-rogerq@ti.com>
The OMAP_USB2 and OMAP_PIPE3 PHY devices will not be
detected if the OMAP_OCP2SCP bus driver is not present.
Make them depend on it.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/phy/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index fe8c009..2aead8b 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -47,6 +47,7 @@ config OMAP_USB2
depends on USB_PHY
select GENERIC_PHY
select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
@@ -58,6 +59,7 @@ config TI_PIPE3
depends on ARCH_OMAP2PLUS || COMPILE_TEST
select GENERIC_PHY
select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
help
Enable this to support the PIPE3 PHY that is part of TI SOCs. This
driver takes care of all the PHY functionality apart from comparator.
--
1.8.3.2
next prev parent reply other threads:[~2014-03-06 14:38 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-06 14:38 [PATCH v2 00/13][RESEND] ARM: OMAP: SATA support for OMAP5 & DRA7 Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` [PATCH v2 01/13] phy: rename struct omap_control_usb to struct omap_control_phy Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 15:37 ` Kishon Vijay Abraham I
2014-03-06 15:37 ` Kishon Vijay Abraham I
2014-03-06 15:37 ` Kishon Vijay Abraham I
2014-03-06 15:56 ` Felipe Balbi
2014-03-06 15:56 ` Felipe Balbi
2014-03-06 15:56 ` Felipe Balbi
2014-03-06 14:38 ` [PATCH v2 02/13] phy: omap-control: Update DT binding information Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 15:40 ` Kishon Vijay Abraham I
2014-03-06 15:40 ` Kishon Vijay Abraham I
2014-03-06 15:40 ` Kishon Vijay Abraham I
2014-03-06 15:58 ` Felipe Balbi
2014-03-06 15:58 ` Felipe Balbi
2014-03-06 15:58 ` Felipe Balbi
2014-03-06 14:38 ` [PATCH v2 03/13] phy: omap-control: update dra7 and am437 usb2 bindings Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 15:41 ` Kishon Vijay Abraham I
2014-03-06 15:41 ` Kishon Vijay Abraham I
2014-03-06 15:41 ` Kishon Vijay Abraham I
2014-03-07 8:25 ` [PATCH v4] phy: omap-control: update dra7 and am437 usb2 Documentation bindings Kishon Vijay Abraham I
2014-03-07 8:25 ` Kishon Vijay Abraham I
2014-03-07 8:26 ` Kishon Vijay Abraham I
2014-03-07 8:26 ` Kishon Vijay Abraham I
2014-03-07 8:26 ` Kishon Vijay Abraham I
2014-03-06 16:00 ` [PATCH v2 03/13] phy: omap-control: update dra7 and am437 usb2 bindings Felipe Balbi
2014-03-06 16:00 ` Felipe Balbi
2014-03-06 16:00 ` Felipe Balbi
2014-03-06 14:38 ` [PATCH v2 04/13] phy: ti-pipe3: cleanup clock handling Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 15:45 ` Kishon Vijay Abraham I
2014-03-06 15:45 ` Kishon Vijay Abraham I
2014-03-06 15:45 ` Kishon Vijay Abraham I
2014-03-06 14:38 ` [PATCH v2 05/13] phy: ti-pipe3: Add SATA DPLL support Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 15:45 ` Kishon Vijay Abraham I
2014-03-06 15:45 ` Kishon Vijay Abraham I
2014-03-06 15:45 ` Kishon Vijay Abraham I
[not found] ` <1394116729-28811-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2014-03-06 14:38 ` [PATCH v2 06/13] phy: ti-pipe3: Don't get 'wkupclk' and 'refclk' for SATA PHY Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 15:31 ` [PATCH v3 " Roger Quadros
2014-03-06 15:31 ` Roger Quadros
2014-03-06 15:31 ` Roger Quadros
2014-03-06 14:38 ` [PATCH v2 07/13] phy: ti-pipe3: streamline PHY operations Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` [PATCH v2 08/13] phy: ti-pipe3: Fix suspend/resume and module reload Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros [this message]
2014-03-06 14:38 ` [PATCH v2 09/13] phy: omap: Depend on OMAP_OCP2SCP bus driver Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` [PATCH v2 10/13] ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` [PATCH v2 11/13] ARM: dts: omap5: add sata node Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` [PATCH v2 12/13] ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` [PATCH v2 13/13] ARM: dts: dra7: add OCP2SCP3 and SATA nodes Roger Quadros
2014-03-06 14:38 ` Roger Quadros
2014-03-06 14:38 ` Roger Quadros
-- strict thread matches above, loose matches on Subject: below --
2014-03-06 14:22 [PATCH v2 00/13] ARM: OMAP: SATA support for OMAP5 & DRA7 Roger Quadros
2014-03-06 14:23 ` [PATCH v2 09/13] phy: omap: Depend on OMAP_OCP2SCP bus driver Roger Quadros
2014-03-06 14:23 ` Roger Quadros
2014-03-06 14:23 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394116729-28811-10-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balajitk@ti.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=george.cherian@ti.com \
--cc=hdegoede@redhat.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.