From: Roger Quadros <rogerq@ti.com>
To: wg@grandegger.com, mkl@pengutronix.de, tony@atomide.com
Cc: tglx@linutronix.de, linux-omap@vger.kernel.org,
linux-can@vger.kernel.org, netdev@vger.kernel.org,
mugunthanvnm@ti.com, george.cherian@ti.com, balbi@ti.com,
nsekhar@ti.comnm@ti.com, Roger Quadros <rogerq@ti.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 04/13] ARM: dts: dra7: Add syscon regmap for CORE CONTROL area
Date: Mon, 8 Sep 2014 17:10:33 +0300 [thread overview]
Message-ID: <1410185442-907-5-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1410185442-907-1-git-send-email-rogerq@ti.com>
Display and DCAN drivers use syscon regmap to access some registers
in the CORE control area. Add the syscon regmap node for this
area.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d678152..370009e 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -200,6 +200,11 @@
ti,hwmods = "counter_32k";
};
+ dra7_ctrl_core: ctrl_core@4a002000 {
+ compatible = "syscon";
+ reg = <0x4a002000 0x6d0>;
+ };
+
dra7_ctrl_general: tisyscon@4a002e00 {
compatible = "syscon";
reg = <0x4a002e00 0x7c>;
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: <wg@grandegger.com>, <mkl@pengutronix.de>, <tony@atomide.com>
Cc: <tglx@linutronix.de>, <linux-omap@vger.kernel.org>,
<linux-can@vger.kernel.org>, <netdev@vger.kernel.org>,
<mugunthanvnm@ti.com>, <george.cherian@ti.com>, <balbi@ti.com>,
<nsekhar@ti.com>, <nm@ti.com>, Roger Quadros <rogerq@ti.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 04/13] ARM: dts: dra7: Add syscon regmap for CORE CONTROL area
Date: Mon, 8 Sep 2014 17:10:33 +0300 [thread overview]
Message-ID: <1410185442-907-5-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1410185442-907-1-git-send-email-rogerq@ti.com>
Display and DCAN drivers use syscon regmap to access some registers
in the CORE control area. Add the syscon regmap node for this
area.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d678152..370009e 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -200,6 +200,11 @@
ti,hwmods = "counter_32k";
};
+ dra7_ctrl_core: ctrl_core@4a002000 {
+ compatible = "syscon";
+ reg = <0x4a002000 0x6d0>;
+ };
+
dra7_ctrl_general: tisyscon@4a002e00 {
compatible = "syscon";
reg = <0x4a002e00 0x7c>;
--
1.8.3.2
next prev parent reply other threads:[~2014-09-08 14:10 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-08 14:10 [PATCH 00/13] net: can: Add can support for TI platforms Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 01/13] can: c_can_platform: Fix c_can_hw_raminit_ti() and add timeout Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 02/13] net: can: c_can: Add syscon/regmap RAMINIT mechanism Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 03/13] net: can: c_can: Add support for START pulse in RAMINIT sequence Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` Roger Quadros [this message]
2014-09-08 14:10 ` [PATCH 04/13] ARM: dts: dra7: Add syscon regmap for CORE CONTROL area Roger Quadros
2014-09-08 17:47 ` Tony Lindgren
2014-09-08 17:47 ` Tony Lindgren
2014-09-08 14:10 ` [PATCH 05/13] ARM: dts: DRA7: Add DCAN nodes Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 16:40 ` Sergei Shtylyov
2014-09-08 16:40 ` Sergei Shtylyov
2014-09-09 8:30 ` Roger Quadros
2014-09-09 8:30 ` Roger Quadros
2014-09-09 8:34 ` Marc Kleine-Budde
2014-09-09 8:34 ` Marc Kleine-Budde
2014-09-09 8:37 ` Roger Quadros
2014-09-09 8:37 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 06/13] ARM: dts: dra7-evm: Add CAN support Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 07/13] ARM: dts: dra72-evm: " Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 08/13] arm: dts: am4372: Add dcan nodes Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 09/13] ARM: dts: AM43xx: Add aliases to d_can nodes Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 10/13] arm: dts: am437x-gp: Add dcan support Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 11/13] ARM: dts: am437x-gp-evm: Add pinctrl sleep states for dcan pins Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 12/13] ARM: dts: am4372: Add control module syscon node Roger Quadros
2014-09-08 14:10 ` Roger Quadros
2014-09-08 14:10 ` [PATCH 13/13] ARM: dts: am4372: Add dcan raminit bits Roger Quadros
2014-09-08 14:10 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410185442-907-5-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=george.cherian@ti.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.comnm \
--cc=tglx@linutronix.de \
--cc=tony@atomide.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.