From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support
Date: Thu, 30 Oct 2014 09:15:04 +0100 [thread overview]
Message-ID: <1414656906-16632-11-git-send-email-hs@denx.de> (raw)
In-Reply-To: <1414656906-16632-1-git-send-email-hs@denx.de>
add support for using spl code on at91sam9260 and at91sam9g45
based boards.
Signed-off-by: Heiko Schocher <hs@denx.de>
---
Changes in v2: None
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 22 +++
arch/arm/cpu/arm926ejs/at91/clock.c | 60 +++++++
arch/arm/cpu/armv7/at91/clock.c | 27 +++
arch/arm/cpu/at91-common/Makefile | 1 +
arch/arm/cpu/at91-common/sdram.c | 77 +++++++++
arch/arm/cpu/at91-common/spl.c | 185 +++++++++++++++------
arch/arm/include/asm/arch-at91/at91_common.h | 4 +
arch/arm/include/asm/arch-at91/at91_pmc.h | 5 +-
arch/arm/include/asm/arch-at91/at91sam9260.h | 1 +
.../arm/include/asm/arch-at91/at91sam9260_matrix.h | 5 +
arch/arm/include/asm/arch-at91/at91sam9_sdramc.h | 22 ++-
11 files changed, 359 insertions(+), 50 deletions(-)
create mode 100644 arch/arm/cpu/at91-common/sdram.c
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
index cae4abc..7a7fd7d 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -8,8 +8,10 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/arch/at91sam9260_matrix.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91sam9_sdramc.h>
#include <asm/arch/gpio.h>
/*
@@ -207,3 +209,23 @@ void at91_mci_hw_init(void)
#endif
}
#endif
+
+void at91_sdram_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTC, 16, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 17, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 18, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 19, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 20, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 21, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 22, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 23, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 24, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 25, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 26, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 27, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 28, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 29, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 30, 0);
+ at91_set_a_periph(AT91_PIO_PORTC, 31, 0);
+}
diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c
index 31315b5..f363982 100644
--- a/arch/arm/cpu/arm926ejs/at91/clock.c
+++ b/arch/arm/cpu/arm926ejs/at91/clock.c
@@ -187,3 +187,63 @@ int at91_clock_init(unsigned long main_clock)
return 0;
}
+
+#if !defined(AT91_PLL_LOCK_TIMEOUT)
+#define AT91_PLL_LOCK_TIMEOUT 1000000
+#endif
+
+void at91_plla_init(u32 pllar)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ int timeout = AT91_PLL_LOCK_TIMEOUT;
+
+ writel(pllar, &pmc->pllar);
+ while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY))) {
+ timeout--;
+ if (timeout == 0)
+ break;
+ }
+}
+void at91_pllb_init(u32 pllbr)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ int timeout = AT91_PLL_LOCK_TIMEOUT;
+
+ writel(pllbr, &pmc->pllbr);
+ while (!(readl(&pmc->sr) & (AT91_PMC_LOCKB | AT91_PMC_MCKRDY))) {
+ timeout--;
+ if (timeout == 0)
+ break;
+ }
+}
+
+void at91_mck_init(u32 mckr)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ int timeout = AT91_PLL_LOCK_TIMEOUT;
+ u32 tmp;
+
+ tmp = readl(&pmc->mckr);
+ tmp &= ~(AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_MASK |
+ AT91_PMC_MCKR_CSS_MASK);
+ tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_MASK |
+ AT91_PMC_MCKR_CSS_MASK);
+ writel(tmp, &pmc->mckr);
+
+ while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) {
+ timeout--;
+ if (timeout == 0)
+ break;
+ }
+}
+
+void at91_periph_clk_enable(int id)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ writel(1 << id, &pmc->pcer);
+}
diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c
index 36ed4a6..363081a 100644
--- a/arch/arm/cpu/armv7/at91/clock.c
+++ b/arch/arm/cpu/armv7/at91/clock.c
@@ -111,6 +111,33 @@ int at91_clock_init(unsigned long main_clock)
return 0;
}
+void at91_plla_init(u32 pllar)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ writel(pllar, &pmc->pllar);
+ while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
+ ;
+}
+
+void at91_mck_init(u32 mckr)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ u32 tmp;
+
+ tmp = readl(&pmc->mckr);
+ tmp &= ~(AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_2);
+ tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK |
+ AT91_PMC_MCKR_MDIV_MASK |
+ AT91_PMC_MCKR_PLLADIV_2);
+ writel(tmp, &pmc->mckr);
+
+ while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+ ;
+}
+
void at91_periph_clk_enable(int id)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
diff --git a/arch/arm/cpu/at91-common/Makefile b/arch/arm/cpu/at91-common/Makefile
index f62863a..5bdfb6a 100644
--- a/arch/arm/cpu/at91-common/Makefile
+++ b/arch/arm/cpu/at91-common/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
ifneq ($(CONFIG_SPL_BUILD),)
+obj-$(CONFIG_AT91SAM9G20) += sdram.o
obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o
obj-$(CONFIG_SAMA5D3) += mpddrc.o
obj-y += spl.o
diff --git a/arch/arm/cpu/at91-common/sdram.c b/arch/arm/cpu/at91-common/sdram.c
new file mode 100644
index 0000000..5758b06
--- /dev/null
+++ b/arch/arm/cpu/at91-common/sdram.c
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2014
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * Based on:
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91sam9_sdramc.h>
+#include <asm/arch/gpio.h>
+
+int sdramc_initialize(unsigned int sdram_address, const struct sdramc_reg *p)
+{
+ struct sdramc_reg *reg = (struct sdramc_reg *)ATMEL_BASE_SDRAMC;
+ unsigned int i;
+
+ /* SDRAM feature must be in the configuration register */
+ writel(p->cr, ®->cr);
+
+ /* The SDRAM memory type must be set in the Memory Device Register */
+ writel(p->mdr, ®->mdr);
+
+ /*
+ * The minimum pause of 200 us is provided to precede any single
+ * toggle
+ */
+ for (i = 0; i < 1000; i++)
+ ;
+
+ /* A NOP command is issued to the SDRAM devices */
+ writel(AT91_SDRAMC_MODE_NOP, ®->mr);
+ writel(0x00000000, sdram_address);
+
+ /* An All Banks Precharge command is issued to the SDRAM devices */
+ writel(AT91_SDRAMC_MODE_PRECHARGE, ®->mr);
+ writel(0x00000000, sdram_address);
+
+ for (i = 0; i < 10000; i++)
+ ;
+
+ /* Eight auto-refresh cycles are provided */
+ for (i = 0; i < 8; i++) {
+ writel(AT91_SDRAMC_MODE_REFRESH, ®->mr);
+ writel(0x00000001 + i, sdram_address + 4 + 4 * i);
+ }
+
+ /*
+ * A Mode Register set (MRS) cyscle is issued to program the
+ * SDRAM parameters(TCSR, PASR, DS)
+ */
+ writel(AT91_SDRAMC_MODE_LMR, ®->mr);
+ writel(0xcafedede, sdram_address + 0x24);
+
+ /*
+ * The application must go into Normal Mode, setting Mode
+ * to 0 in the Mode Register and perform a write access at
+ * any location in the SDRAM.
+ */
+ writel(AT91_SDRAMC_MODE_NORMAL, ®->mr);
+ writel(0x00000000, sdram_address); /* Perform Normal mode */
+
+ /*
+ * Write the refresh rate into the count field in the SDRAMC
+ * Refresh Timer Rgister.
+ */
+ writel(p->tr, ®->tr);
+
+ return 0;
+}
diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c
index 674a470..5c9a3ad 100644
--- a/arch/arm/cpu/at91-common/spl.c
+++ b/arch/arm/cpu/at91-common/spl.c
@@ -8,11 +8,18 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
+#if !defined(CONFIG_SAMA5D3)
+#include <asm/arch/at91sam9_matrix.h>
+#endif
+#include <asm/arch/at91_pit.h>
#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_wdt.h>
#include <asm/arch/clk.h>
#include <spl.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static void at91_disable_wdt(void)
{
struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT;
@@ -20,6 +27,33 @@ static void at91_disable_wdt(void)
writel(AT91_WDT_MR_WDDIS, &wdt->mr);
}
+u32 spl_boot_device(void)
+{
+#ifdef CONFIG_SYS_USE_MMC
+ return BOOT_DEVICE_MMC1;
+#elif CONFIG_SYS_USE_NANDFLASH
+ return BOOT_DEVICE_NAND;
+#elif CONFIG_SYS_USE_SERIALFLASH
+ return BOOT_DEVICE_SPI;
+#endif
+ return BOOT_DEVICE_NONE;
+}
+
+u32 spl_boot_mode(void)
+{
+ switch (spl_boot_device()) {
+#ifdef CONFIG_SYS_USE_MMC
+ case BOOT_DEVICE_MMC1:
+ return MMCSD_MODE_FS;
+ break;
+#endif
+ case BOOT_DEVICE_NONE:
+ default:
+ hang();
+ }
+}
+
+#if defined(CONFIG_SAMA5D3)
static void switch_to_main_crystal_osc(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
@@ -57,77 +91,134 @@ static void switch_to_main_crystal_osc(void)
writel(tmp, &pmc->mor);
}
-void at91_plla_init(u32 pllar)
+void s_init(void)
{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ switch_to_main_crystal_osc();
- writel(pllar, &pmc->pllar);
- while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
- ;
-}
+ /* disable watchdog */
+ at91_disable_wdt();
-void at91_mck_init(u32 mckr)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- u32 tmp;
+ /* PMC configuration */
+ at91_pmc_init();
- tmp = readl(&pmc->mckr);
- tmp &= ~(AT91_PMC_MCKR_PRES_MASK |
- AT91_PMC_MCKR_MDIV_MASK |
- AT91_PMC_MCKR_PLLADIV_2);
- tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK |
- AT91_PMC_MCKR_MDIV_MASK |
- AT91_PMC_MCKR_PLLADIV_2);
- writel(tmp, &pmc->mckr);
+ at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
- while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
- ;
-}
+ timer_init();
+ board_early_init_f();
-u32 spl_boot_device(void)
+ preloader_console_init();
+
+ mem_init();
+}
+#else
+static void enable_ext_reset(void)
{
-#ifdef CONFIG_SYS_USE_MMC
- return BOOT_DEVICE_MMC1;
-#elif CONFIG_SYS_USE_NANDFLASH
- return BOOT_DEVICE_NAND;
-#elif CONFIG_SYS_USE_SERIALFLASH
- return BOOT_DEVICE_SPI;
-#endif
- return BOOT_DEVICE_NONE;
+ struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
+
+ writel(AT91_RSTC_KEY | AT91_RSTC_MR_URSTEN, &rstc->mr);
}
-u32 spl_boot_mode(void)
+#if defined(CONFIG_ATMEL_MATRIX_INIT)
+static void matrix_init(void)
{
- switch (spl_boot_device()) {
-#ifdef CONFIG_SYS_USE_MMC
- case BOOT_DEVICE_MMC1:
- return MMCSD_MODE_FS;
- break;
+ struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+
+ writel((readl(&mat->scfg[3]) & (~AT91_MATRIX_SLOT_CYCLE))
+ | AT91_MATRIX_SLOT_CYCLE_(0x40),
+ &mat->scfg[3]);
+}
#endif
- case BOOT_DEVICE_NONE:
- default:
- hang();
+
+void lowlevel_clock_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ if (!(readl(&pmc->sr) & AT91_PMC_MOSCS)) {
+ /* Enable Main Oscillator */
+ writel(AT91_PMC_MOSCS | (0x40 << 8), &pmc->mor);
+
+ /* Wait until Main Oscillator is stable */
+ while (!(readl(&pmc->sr) & AT91_PMC_MOSCS))
+ ;
}
+
+ /* After stabilization, switch to Main Oscillator */
+ if ((readl(&pmc->mckr) & AT91_PMC_CSS) == AT91_PMC_CSS_SLOW) {
+ unsigned long tmp;
+
+ tmp = readl(&pmc->mckr);
+ tmp &= ~AT91_PMC_CSS;
+ tmp |= AT91_PMC_CSS_MAIN;
+ writel(tmp, &pmc->mckr);
+ while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+ ;
+
+ tmp &= ~AT91_PMC_PRES;
+ tmp |= AT91_PMC_PRES_1;
+ writel(tmp, &pmc->mckr);
+ while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
+ ;
+ }
+
+ return;
}
-void s_init(void)
+void __weak at91_spl_board_init(void)
{
- switch_to_main_crystal_osc();
+}
- /* disable watchdog */
+void spl_board_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ lowlevel_clock_init();
at91_disable_wdt();
- /* PMC configuration */
- at91_pmc_init();
+ /*
+ * At this stage the main oscillator is supposed to be enabled
+ * PCK = MCK = MOSC
+ */
+ writel(0x00, &pmc->pllicpr);
- at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
+ at91_plla_init(CONFIG_SYS_AT91_PLLA);
- timer_init();
+ /* PCK = PLLA = 2 * MCK */
+ at91_mck_init(CONFIG_SYS_MCKR);
- board_early_init_f();
+ /* Switch MCK on PLLA output */
+ at91_mck_init(CONFIG_SYS_MCKR_CSS);
+
+#if defined(CONFIG_SYS_AT91_PLLB)
+ /* Configure PLLB */
+ at91_pllb_init(CONFIG_SYS_AT91_PLLB);
+#endif
+
+ /* Enable External Reset */
+ enable_ext_reset();
+#if defined(CONFIG_ATMEL_MATRIX_INIT)
+ /* Initialize matrix */
+ matrix_init();
+#endif
+
+ gd->arch.mck_rate_hz = CONFIG_SYS_MASTER_CLOCK;
+ /*
+ * init timer long enough for using in spl.
+ */
+ timer_init();
+
+ /* enable clocks for all PIOs */
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_periph_clk_enable(ATMEL_ID_PIOB);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
+ /* init console */
+ at91_seriald_hw_init();
preloader_console_init();
mem_init();
+
+ at91_spl_board_init();
}
+#endif
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h
index 59e2f43..2d94090 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/include/asm/arch-at91/at91_common.h
@@ -23,9 +23,13 @@ void at91_udp_hw_init(void);
void at91_uhp_hw_init(void);
void at91_lcd_hw_init(void);
void at91_plla_init(u32 pllar);
+void at91_pllb_init(u32 pllar);
void at91_mck_init(u32 mckr);
void at91_pmc_init(void);
void mem_init(void);
void at91_phy_reset(void);
+void at91_sdram_hw_init(void);
+void at91_mck_init(u32 mckr);
+void at91_spl_board_init(void);
#endif /* AT91_COMMON_H */
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 27331ff..5f64583 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -95,7 +95,7 @@ typedef struct at91_pmc {
#define AT91_PMC_MCKR_CSS_MAIN 0x00000001
#define AT91_PMC_MCKR_CSS_PLLA 0x00000002
#define AT91_PMC_MCKR_CSS_PLLB 0x00000003
-#define AT91_PMC_MCKR_CSS_MASK 0x00000003
+#define AT91_PMC_MCKR_CSS_MASK 0x00000007
#ifdef CONFIG_SAMA5D3
#define AT91_PMC_MCKR_PRES_1 0x00000000
@@ -114,7 +114,7 @@ typedef struct at91_pmc {
#define AT91_PMC_MCKR_PRES_16 0x00000010
#define AT91_PMC_MCKR_PRES_32 0x00000014
#define AT91_PMC_MCKR_PRES_64 0x00000018
-#define AT91_PMC_MCKR_PRES_MASK 0x0000001C
+#define AT91_PMC_MCKR_PRES_MASK 0x0000003C
#endif
#ifdef CONFIG_AT91RM9200
@@ -133,6 +133,7 @@ typedef struct at91_pmc {
#define AT91_PMC_MCKR_MDIV_MASK 0x00000300
#endif
+#define AT91_PMC_MCKR_PLLADIV_MASK 0x00003000
#define AT91_PMC_MCKR_PLLADIV_1 0x00000000
#define AT91_PMC_MCKR_PLLADIV_2 0x00001000
diff --git a/arch/arm/include/asm/arch-at91/at91sam9260.h b/arch/arm/include/asm/arch-at91/at91sam9260.h
index 2e902ee..1e613fa 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9260.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9260.h
@@ -95,6 +95,7 @@
#define ATMEL_BASE_SDRAMC 0xffffea00
#define ATMEL_BASE_SMC 0xffffec00
#define ATMEL_BASE_MATRIX 0xffffee00
+#define ATMEL_BASE_CCFG 0xffffef14
#define ATMEL_BASE_AIC 0xfffff000
#define ATMEL_BASE_DBGU 0xfffff200
#define ATMEL_BASE_PIOA 0xfffff400
diff --git a/arch/arm/include/asm/arch-at91/at91sam9260_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9260_matrix.h
index 4755fa1..dc61f48 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9260_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9260_matrix.h
@@ -61,5 +61,10 @@ struct at91_matrix {
#define AT91_MATRIX_DBPUC (1 << 8)
#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_IOSR_SEL (1 << 17)
+
+/* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0)
+#define AT91_MATRIX_SLOT_CYCLE_(x) (x << 0)
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h b/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
index 5c98cc7..3a076c6 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
@@ -25,6 +25,21 @@
#define AT91_ASM_SDRAMC_CR (ATMEL_BASE_SDRAMC + 0x08)
#define AT91_ASM_SDRAMC_MDR (ATMEL_BASE_SDRAMC + 0x24)
+#else
+struct sdramc_reg {
+ u32 mr;
+ u32 tr;
+ u32 cr;
+ u32 lpr;
+ u32 ier;
+ u32 idr;
+ u32 imr;
+ u32 isr;
+ u32 mdr;
+};
+
+int sdramc_initialize(unsigned int sdram_address,
+ const struct sdramc_reg *p);
#endif
/* SDRAM Controller (SDRAMC) registers */
@@ -62,11 +77,17 @@
#define AT91_SDRAMC_DBW_32 (0 << 7)
#define AT91_SDRAMC_DBW_16 (1 << 7)
#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
+#define AT91_SDRAMC_TWR_VAL(x) (x << 8)
#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRC_VAL(x) (x << 12)
#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRP_VAL(x) (x << 16)
#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
+#define AT91_SDRAMC_TRCD_VAL(x) (x << 20)
#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TRAS_VAL(x) (x << 24)
#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+#define AT91_SDRAMC_TXSR_VAL(x) (x << 28)
#define AT91_SDRAMC_LPR (ATMEL_BASE_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
@@ -93,5 +114,4 @@
#define AT91_SDRAMC_MD_SDRAM 0
#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-
#endif
--
1.8.3.1
next prev parent reply other threads:[~2014-10-30 8:15 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-30 8:14 [U-Boot] [v2 PATCH 0/12] arm, at91, spl: add spl support for the taurus and corvus boards Heiko Schocher
2014-10-30 8:14 ` [U-Boot] [v2 PATCH 01/12] spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header Heiko Schocher
2014-10-30 8:14 ` [U-Boot] [v2 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board Heiko Schocher
2014-10-30 8:14 ` [U-Boot] [v2 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init() Heiko Schocher
2014-10-31 1:55 ` Bo Shen
2014-10-31 5:33 ` Heiko Schocher
2014-10-30 8:14 ` [U-Boot] [v2 PATCH 04/12] arm, at91: compile mpddrc ram init code also for AT91SAM9M10G45 Heiko Schocher
2014-10-30 8:14 ` [U-Boot] [v2 PATCH 05/12] arm, at91: add missing ddr2 cr register MPDDRC_CR_EBISHARE define Heiko Schocher
2014-10-30 8:15 ` [U-Boot] [v2 PATCH 06/12] spl, nand: add option to boot raw u-boot.bin image only Heiko Schocher
2014-10-30 8:15 ` [U-Boot] [v2 PATCH 07/12] mtd: atmel_nand: add missign include Heiko Schocher
2014-10-30 8:15 ` [U-Boot] [v2 PATCH 08/12] spl, nand, atmel_nand: add erase one block function Heiko Schocher
2014-10-30 23:16 ` Scott Wood
2014-10-30 8:15 ` [U-Boot] [v2 PATCH 09/12] spl, mtd, nand, atmel_nand: invert device ready pin logic Heiko Schocher
2014-10-30 23:18 ` Scott Wood
2014-10-30 8:15 ` Heiko Schocher [this message]
2014-10-30 10:17 ` [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support Bo Shen
2014-10-30 11:41 ` Heiko Schocher
2014-10-31 1:55 ` Bo Shen
2014-10-31 1:50 ` Bo Shen
2014-10-31 6:03 ` Heiko Schocher
2014-10-31 6:08 ` Wolfgang Denk
2014-10-30 8:15 ` [U-Boot] [v2 PATCH 11/12] arm, at91, spl: add spl support for the taurus board Heiko Schocher
2014-10-30 8:15 ` [U-Boot] [v2 PATCH 12/12] arm, spl, at91: add spl support for the corvus board Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414656906-16632-11-git-send-email-hs@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.