From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>,
Mike Turquette <mturquette@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Daniel Drake <drake@endlessm.com>, Kukjin Kim <kgene@kernel.org>,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH] clk: samsung: exynos4: Disable ARMCLK down feature on Exynos4210 SoC
Date: Fri, 27 Mar 2015 17:27:10 +0100 [thread overview]
Message-ID: <1430933.sM2tQimLcT@amdc1032> (raw)
Commit 42773b28e71d ("clk: samsung: exynos4: Enable ARMCLK
down feature") enabled ARMCLK down feature on all Exynos4
SoCs. Unfortunately on Exynos4210 SoC ARMCLK down feature
causes a lockup when ondemand cpufreq governor is used.
Fix it by limiting ARMCLK down feature to Exynos4x12 SoCs.
This patch was tested on:
- Exynos4210 SoC based Trats board
- Exynos4210 SoC based Origen board
- Exynos4412 SoC based Trats2 board
- Exynos4412 SoC based Odroid-U3 board
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Fixes: 42773b28e71d ("clk: samsung: exynos4: Enable ARMCLK down feature")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/clk/samsung/clk-exynos4.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 51462e8..714d6ba 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -1354,7 +1354,7 @@ static struct samsung_pll_clock exynos4x12_plls[nr_plls] __initdata = {
VPLL_LOCK, VPLL_CON0, NULL),
};
-static void __init exynos4_core_down_clock(enum exynos4_soc soc)
+static void __init exynos4x12_core_down_clock(void)
{
unsigned int tmp;
@@ -1373,11 +1373,9 @@ static void __init exynos4_core_down_clock(enum exynos4_soc soc)
__raw_writel(tmp, reg_base + PWR_CTRL1);
/*
- * Disable the clock up feature on Exynos4x12, in case it was
- * enabled by bootloader.
+ * Disable the clock up feature in case it was enabled by bootloader.
*/
- if (exynos4_soc == EXYNOS4X12)
- __raw_writel(0x0, reg_base + E4X12_PWR_CTRL2);
+ __raw_writel(0x0, reg_base + E4X12_PWR_CTRL2);
}
/* register exynos4 clocks */
@@ -1474,7 +1472,8 @@ static void __init exynos4_clk_init(struct device_node *np,
samsung_clk_register_alias(ctx, exynos4_aliases,
ARRAY_SIZE(exynos4_aliases));
- exynos4_core_down_clock(soc);
+ if (soc == EXYNOS4X12)
+ exynos4x12_core_down_clock();
exynos4_clk_sleep_init();
samsung_clk_of_add_provider(np, ctx);
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: b.zolnierkie@samsung.com (Bartlomiej Zolnierkiewicz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] clk: samsung: exynos4: Disable ARMCLK down feature on Exynos4210 SoC
Date: Fri, 27 Mar 2015 17:27:10 +0100 [thread overview]
Message-ID: <1430933.sM2tQimLcT@amdc1032> (raw)
Commit 42773b28e71d ("clk: samsung: exynos4: Enable ARMCLK
down feature") enabled ARMCLK down feature on all Exynos4
SoCs. Unfortunately on Exynos4210 SoC ARMCLK down feature
causes a lockup when ondemand cpufreq governor is used.
Fix it by limiting ARMCLK down feature to Exynos4x12 SoCs.
This patch was tested on:
- Exynos4210 SoC based Trats board
- Exynos4210 SoC based Origen board
- Exynos4412 SoC based Trats2 board
- Exynos4412 SoC based Odroid-U3 board
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Fixes: 42773b28e71d ("clk: samsung: exynos4: Enable ARMCLK down feature")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/clk/samsung/clk-exynos4.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 51462e8..714d6ba 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -1354,7 +1354,7 @@ static struct samsung_pll_clock exynos4x12_plls[nr_plls] __initdata = {
VPLL_LOCK, VPLL_CON0, NULL),
};
-static void __init exynos4_core_down_clock(enum exynos4_soc soc)
+static void __init exynos4x12_core_down_clock(void)
{
unsigned int tmp;
@@ -1373,11 +1373,9 @@ static void __init exynos4_core_down_clock(enum exynos4_soc soc)
__raw_writel(tmp, reg_base + PWR_CTRL1);
/*
- * Disable the clock up feature on Exynos4x12, in case it was
- * enabled by bootloader.
+ * Disable the clock up feature in case it was enabled by bootloader.
*/
- if (exynos4_soc == EXYNOS4X12)
- __raw_writel(0x0, reg_base + E4X12_PWR_CTRL2);
+ __raw_writel(0x0, reg_base + E4X12_PWR_CTRL2);
}
/* register exynos4 clocks */
@@ -1474,7 +1472,8 @@ static void __init exynos4_clk_init(struct device_node *np,
samsung_clk_register_alias(ctx, exynos4_aliases,
ARRAY_SIZE(exynos4_aliases));
- exynos4_core_down_clock(soc);
+ if (soc == EXYNOS4X12)
+ exynos4x12_core_down_clock();
exynos4_clk_sleep_init();
samsung_clk_of_add_provider(np, ctx);
--
1.7.9.5
next reply other threads:[~2015-03-27 16:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-27 16:27 Bartlomiej Zolnierkiewicz [this message]
2015-03-27 16:27 ` [PATCH] clk: samsung: exynos4: Disable ARMCLK down feature on Exynos4210 SoC Bartlomiej Zolnierkiewicz
2015-03-28 16:37 ` Krzysztof Kozlowski
2015-03-28 16:37 ` Krzysztof Kozlowski
2015-04-13 4:02 ` Michael Turquette
2015-04-13 4:02 ` Michael Turquette
2015-04-13 4:02 ` Michael Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430933.sM2tQimLcT@amdc1032 \
--to=b.zolnierkie@samsung.com \
--cc=drake@endlessm.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@codeaurora.org \
--cc=stable@vger.kernel.org \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.