From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v11 10/19] h8300: Process and signal
Date: Sat, 9 May 2015 00:04:30 +0900 [thread overview]
Message-ID: <1431097479-21101-11-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1431097479-21101-1-git-send-email-ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/kernel/process.c | 171 +++++++++++++++++++++++++++++++++++++
arch/h8300/kernel/ptrace.c | 203 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 374 insertions(+)
create mode 100644 arch/h8300/kernel/process.c
create mode 100644 arch/h8300/kernel/ptrace.c
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
new file mode 100644
index 0000000..dee4125
--- /dev/null
+++ b/arch/h8300/kernel/process.c
@@ -0,0 +1,171 @@
+/*
+ * linux/arch/h8300/kernel/process.c
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * Based on:
+ *
+ * linux/arch/m68knommu/kernel/process.c
+ *
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ * Kenneth Albanowski <kjahds@kjahds.com>,
+ * The Silver Hammer Group, Ltd.
+ *
+ * linux/arch/m68k/kernel/process.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/rcupdate.h>
+
+#include <asm/uaccess.h>
+#include <asm/traps.h>
+#include <asm/setup.h>
+#include <asm/pgtable.h>
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+asmlinkage void ret_from_fork(void);
+asmlinkage void ret_from_kernel_thread(void);
+
+/*
+ * The idle loop on an H8/300..
+ */
+void arch_cpu_idle(void)
+{
+ local_irq_enable();
+ __asm__("sleep");
+}
+
+void machine_restart(char *__unused)
+{
+ local_irq_disable();
+ __asm__("jmp @@0");
+}
+
+void machine_halt(void)
+{
+ local_irq_disable();
+ __asm__("sleep");
+ for (;;)
+ ;
+}
+
+void machine_power_off(void)
+{
+ local_irq_disable();
+ __asm__("sleep");
+ for (;;)
+ ;
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ show_regs_print_info(KERN_DEFAULT);
+
+ pr_notice("\n");
+ pr_notice("PC: %08lx Status: %02x\n",
+ regs->pc, regs->ccr);
+ pr_notice("ORIG_ER0: %08lx ER0: %08lx ER1: %08lx\n",
+ regs->orig_er0, regs->er0, regs->er1);
+ pr_notice("ER2: %08lx ER3: %08lx ER4: %08lx ER5: %08lx\n",
+ regs->er2, regs->er3, regs->er4, regs->er5);
+ pr_notice("ER6' %08lx ", regs->er6);
+ if (user_mode(regs))
+ printk("USP: %08lx\n", rdusp());
+ else
+ printk("\n");
+}
+
+void flush_thread(void)
+{
+}
+
+int copy_thread(unsigned long clone_flags,
+ unsigned long usp, unsigned long topstk,
+ struct task_struct *p)
+{
+ struct pt_regs *childregs;
+
+ childregs = (struct pt_regs *) (THREAD_SIZE + task_stack_page(p)) - 1;
+
+ if (unlikely(p->flags & PF_KTHREAD)) {
+ memset(childregs, 0, sizeof(struct pt_regs));
+ childregs->retpc = (unsigned long) ret_from_kernel_thread;
+ childregs->er4 = topstk; /* arg */
+ childregs->er5 = usp; /* fn */
+ } else {
+ *childregs = *current_pt_regs();
+ childregs->er0 = 0;
+ childregs->retpc = (unsigned long) ret_from_fork;
+ p->thread.usp = usp ?: rdusp();
+ }
+ p->thread.ksp = (unsigned long)childregs;
+
+ return 0;
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+ return ((struct pt_regs *)tsk->thread.esp0)->pc;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long fp, pc;
+ unsigned long stack_page;
+ int count = 0;
+
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ stack_page = (unsigned long)p;
+ fp = ((struct pt_regs *)p->thread.ksp)->er6;
+ do {
+ if (fp < stack_page+sizeof(struct thread_info) ||
+ fp >= 8184+stack_page)
+ return 0;
+ pc = ((unsigned long *)fp)[1];
+ if (!in_sched_functions(pc))
+ return pc;
+ fp = *(unsigned long *) fp;
+ } while (count++ < 16);
+ return 0;
+}
+
+/* generic sys_clone is not enough registers */
+asmlinkage int sys_clone(unsigned long __user *args)
+{
+ unsigned long clone_flags;
+ unsigned long newsp;
+ uintptr_t parent_tidptr;
+ uintptr_t child_tidptr;
+
+ get_user(clone_flags, &args[0]);
+ get_user(newsp, &args[1]);
+ get_user(parent_tidptr, &args[2]);
+ get_user(child_tidptr, &args[3]);
+ return do_fork(clone_flags, newsp, 0,
+ (int __user *)parent_tidptr, (int __user *)child_tidptr);
+}
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
new file mode 100644
index 0000000..9207554
--- /dev/null
+++ b/arch/h8300/kernel/ptrace.c
@@ -0,0 +1,203 @@
+/*
+ * linux/arch/h8300/kernel/ptrace.c
+ *
+ * Copyright 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/audit.h>
+#include <linux/tracehook.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
+
+#define CCR_MASK 0x6f /* mode/imask not set */
+#define EXR_MASK 0x80 /* modify only T */
+
+#define PT_REG(r) offsetof(struct pt_regs, r)
+
+extern void user_disable_single_step(struct task_struct *child);
+
+/* Mapping from PT_xxx to the stack offset at which the register is
+ saved. Notice that usp has no stack-slot and needs to be treated
+ specially (see get_reg/put_reg below). */
+static const int register_offset[] = {
+ PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4),
+ PT_REG(er5), PT_REG(er6), PT_REG(er0), -1,
+ PT_REG(orig_er0), PT_REG(ccr), PT_REG(pc),
+#if defined(CONFIG_CPU_H8S)
+ PT_REG(exr),
+#endif
+};
+
+/* read register */
+long h8300_get_reg(struct task_struct *task, int regno)
+{
+ switch (regno) {
+ case PT_USP:
+ return task->thread.usp + sizeof(long)*2;
+ case PT_CCR:
+ case PT_EXR:
+ return *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]);
+ default:
+ return *(unsigned long *)(task->thread.esp0 +
+ register_offset[regno]);
+ }
+}
+
+int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
+{
+ unsigned short oldccr;
+ unsigned short oldexr;
+
+ switch (regno) {
+ case PT_USP:
+ task->thread.usp = data - sizeof(long)*2;
+ case PT_CCR:
+ oldccr = *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]);
+ oldccr &= ~CCR_MASK;
+ data &= CCR_MASK;
+ data |= oldccr;
+ *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]) = data;
+ break;
+ case PT_EXR:
+ oldexr = *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]);
+ oldccr &= ~EXR_MASK;
+ data &= EXR_MASK;
+ data |= oldexr;
+ *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]) = data;
+ break;
+ default:
+ *(unsigned long *)(task->thread.esp0 +
+ register_offset[regno]) = data;
+ break;
+ }
+ return 0;
+}
+
+static int regs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int r;
+ struct user_regs_struct regs;
+ long *reg = (long *)®s;
+
+ /* build user regs in buffer */
+ for (r = 0; r < ARRAY_SIZE(register_offset); r++)
+ *reg++ = h8300_get_reg(target, r);
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ ®s, 0, sizeof(regs));
+}
+
+static int regs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int r;
+ int ret;
+ struct user_regs_struct regs;
+ long *reg;
+
+ /* build user regs in buffer */
+ for (reg = (long *)®s, r = 0; r < ARRAY_SIZE(register_offset); r++)
+ *reg++ = h8300_get_reg(target, r);
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ ®s, 0, sizeof(regs));
+ if (ret)
+ return ret;
+
+ /* write back to pt_regs */
+ for (reg = (long *)®s, r = 0; r < ARRAY_SIZE(register_offset); r++)
+ h8300_put_reg(target, r, *reg++);
+ return 0;
+}
+
+enum h8300_regset {
+ REGSET_GENERAL,
+};
+
+static const struct user_regset h8300_regsets[] = {
+ [REGSET_GENERAL] = {
+ .core_note_type = NT_PRSTATUS,
+ .n = ELF_NGREG,
+ .size = sizeof(long),
+ .align = sizeof(long),
+ .get = regs_get,
+ .set = regs_set,
+ },
+};
+
+static const struct user_regset_view user_h8300_native_view = {
+ .name = "h8300",
+ .e_machine = EM_H8_300,
+ .regsets = h8300_regsets,
+ .n = ARRAY_SIZE(h8300_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+ return &user_h8300_native_view;
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+ user_disable_single_step(child);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data)
+{
+ int ret;
+
+ switch (request) {
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+ return ret;
+}
+
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+ long ret = 0;
+
+ if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+ tracehook_report_syscall_entry(regs))
+ /*
+ * Tracing decided this syscall should not happen.
+ * We'll return a bogus call number to get an ENOSYS
+ * error, but leave the original number in regs->regs[0].
+ */
+ ret = -1L;
+
+ audit_syscall_entry(regs->er1, regs->er2, regs->er3,
+ regs->er4, regs->er5);
+
+ return ret ?: regs->er0;
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+ int step;
+
+ audit_syscall_exit(regs);
+
+ step = test_thread_flag(TIF_SINGLESTEP);
+ if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(regs, step);
+}
--
2.1.4
next prev parent reply other threads:[~2015-05-08 15:04 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-08 15:04 [PATCH v11 00/19] Re-introduce h8300 architecture Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 01/19] MAINTAINERS: Add H8/300 entry Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 02/19] mksysmap: Add h8300 local symbol pattern Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 03/19] Add ELF machine Yoshinori Sato
[not found] ` <1431097479-21101-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2015-05-08 15:04 ` [PATCH v11 04/19] sh-sci: Add h8300 SCI Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 05/19] asm-generic: Add common asm-offsets.h Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 06/19] h8300: Assembly headers Yoshinori Sato
2015-05-10 10:46 ` Richard Weinberger
2015-05-11 3:30 ` Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 07/19] h8300: UAPI headers Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 08/19] h8300: Exception and Interrupt handling Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 09/19] h8300: kernel booting Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato [this message]
2015-05-08 15:04 ` [PATCH v11 11/19] h8300: CPU depend helpers Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 12/19] h8300: miscellaneous functions Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 13/19] h8300: Memory management Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 14/19] h8300: library functions Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 15/19] h8300: Build scripts Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 16/19] h8300: configs Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 17/19] h8300: clock driver Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 18/19] h8300: clocksource Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 19/19] h8300: devicetree source Yoshinori Sato
2015-05-08 16:50 ` Mark Rutland
2015-05-09 11:19 ` Yoshinori Sato
2015-05-08 18:54 ` [PATCH v11 00/19] Re-introduce h8300 architecture Guenter Roeck
2015-05-09 11:20 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431097479-21101-11-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.