From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v11 12/19] h8300: miscellaneous functions
Date: Sat, 9 May 2015 00:04:32 +0900 [thread overview]
Message-ID: <1431097479-21101-13-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1431097479-21101-1-git-send-email-ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/kernel/asm-offsets.c | 67 ++++++++++++++++++++++++++++++++++
arch/h8300/kernel/dma.c | 69 +++++++++++++++++++++++++++++++++++
arch/h8300/kernel/h8300_ksyms.c | 34 ++++++++++++++++++
arch/h8300/kernel/module.c | 70 ++++++++++++++++++++++++++++++++++++
arch/h8300/kernel/sim-console.c | 79 +++++++++++++++++++++++++++++++++++++++++
arch/h8300/kernel/syscalls.c | 14 ++++++++
6 files changed, 333 insertions(+)
create mode 100644 arch/h8300/kernel/asm-offsets.c
create mode 100644 arch/h8300/kernel/dma.c
create mode 100644 arch/h8300/kernel/h8300_ksyms.c
create mode 100644 arch/h8300/kernel/module.c
create mode 100644 arch/h8300/kernel/sim-console.c
create mode 100644 arch/h8300/kernel/syscalls.c
diff --git a/arch/h8300/kernel/asm-offsets.c b/arch/h8300/kernel/asm-offsets.c
new file mode 100644
index 0000000..dc2d16c
--- /dev/null
+++ b/arch/h8300/kernel/asm-offsets.c
@@ -0,0 +1,67 @@
+/*
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/kbuild.h>
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+
+int main(void)
+{
+ /* offsets into the task struct */
+ OFFSET(TASK_STATE, task_struct, state);
+ OFFSET(TASK_FLAGS, task_struct, flags);
+ OFFSET(TASK_PTRACE, task_struct, ptrace);
+ OFFSET(TASK_BLOCKED, task_struct, blocked);
+ OFFSET(TASK_THREAD, task_struct, thread);
+ OFFSET(TASK_THREAD_INFO, task_struct, stack);
+ OFFSET(TASK_MM, task_struct, mm);
+ OFFSET(TASK_ACTIVE_MM, task_struct, active_mm);
+
+ /* offsets into the irq_cpustat_t struct */
+ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t,
+ __softirq_pending));
+
+ /* offsets into the thread struct */
+ OFFSET(THREAD_KSP, thread_struct, ksp);
+ OFFSET(THREAD_USP, thread_struct, usp);
+ OFFSET(THREAD_CCR, thread_struct, ccr);
+
+ /* offsets into the pt_regs struct */
+ DEFINE(LER0, offsetof(struct pt_regs, er0) - sizeof(long));
+ DEFINE(LER1, offsetof(struct pt_regs, er1) - sizeof(long));
+ DEFINE(LER2, offsetof(struct pt_regs, er2) - sizeof(long));
+ DEFINE(LER3, offsetof(struct pt_regs, er3) - sizeof(long));
+ DEFINE(LER4, offsetof(struct pt_regs, er4) - sizeof(long));
+ DEFINE(LER5, offsetof(struct pt_regs, er5) - sizeof(long));
+ DEFINE(LER6, offsetof(struct pt_regs, er6) - sizeof(long));
+ DEFINE(LORIG, offsetof(struct pt_regs, orig_er0) - sizeof(long));
+ DEFINE(LSP, offsetof(struct pt_regs, sp) - sizeof(long));
+ DEFINE(LCCR, offsetof(struct pt_regs, ccr) - sizeof(long));
+ DEFINE(LVEC, offsetof(struct pt_regs, vector) - sizeof(long));
+#if defined(CONFIG_CPU_H8S)
+ DEFINE(LEXR, offsetof(struct pt_regs, exr) - sizeof(long));
+#endif
+ DEFINE(LRET, offsetof(struct pt_regs, pc) - sizeof(long));
+
+ DEFINE(PT_PTRACED, PT_PTRACED);
+
+ /* offsets in thread_info structure */
+ OFFSET(TI_TASK, thread_info, task);
+ OFFSET(TI_FLAGS, thread_info, flags);
+ OFFSET(TI_CPU, thread_info, cpu);
+ OFFSET(TI_PRE, thread_info, preempt_count);
+
+ return 0;
+}
diff --git a/arch/h8300/kernel/dma.c b/arch/h8300/kernel/dma.c
new file mode 100644
index 0000000..eeb13d3
--- /dev/null
+++ b/arch/h8300/kernel/dma.c
@@ -0,0 +1,69 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/scatterlist.h>
+#include <linux/module.h>
+#include <asm/pgalloc.h>
+
+static void *dma_alloc(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp,
+ struct dma_attrs *attrs)
+{
+ void *ret;
+
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (dev == NULL || (*dev->dma_mask < 0xffffffff))
+ gfp |= GFP_DMA;
+ ret = (void *)__get_free_pages(gfp, get_order(size));
+
+ if (ret != NULL) {
+ memset(ret, 0, size);
+ *dma_handle = virt_to_phys(ret);
+ }
+ return ret;
+}
+
+static void dma_free(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle,
+ struct dma_attrs *attrs)
+
+{
+ free_pages((unsigned long)vaddr, get_order(size));
+}
+
+static dma_addr_t map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ return page_to_phys(page) + offset;
+}
+
+static int map_sg(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *sg;
+ int i;
+
+ for_each_sg(sgl, sg, nents, i) {
+ sg->dma_address = sg_phys(sg);
+ }
+
+ return nents;
+}
+
+struct dma_map_ops h8300_dma_map_ops = {
+ .alloc = dma_alloc,
+ .free = dma_free,
+ .map_page = map_page,
+ .map_sg = map_sg,
+};
+EXPORT_SYMBOL(h8300_dma_map_ops);
diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c
new file mode 100644
index 0000000..33bf96a
--- /dev/null
+++ b/arch/h8300/kernel/h8300_ksyms.c
@@ -0,0 +1,34 @@
+#include <linux/module.h>
+#include <linux/linkage.h>
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+asmlinkage long long __ashldi3(long long, int);
+asmlinkage long long __ashrdi3(long long, int);
+asmlinkage long long __lshrdi3(long long, int);
+asmlinkage long __divsi3(long, long);
+asmlinkage long __modsi3(long, long);
+asmlinkage unsigned long __umodsi3(unsigned long, unsigned long);
+asmlinkage long long __muldi3(long long, long long);
+asmlinkage long __mulsi3(long, long);
+asmlinkage long __udivsi3(long, long);
+asmlinkage void *memcpy(void *, const void *, size_t);
+asmlinkage void *memset(void *, int, size_t);
+asmlinkage long strncpy_from_user(void *to, void *from, size_t n);
+
+ /* gcc lib functions */
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__mulsi3);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(strncpy_from_user);
diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c
new file mode 100644
index 0000000..515f6c4
--- /dev/null
+++ b/arch/h8300/kernel/module.c
@@ -0,0 +1,70 @@
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
+ /* This is where to make the change */
+ uint32_t *loc =
+ (uint32_t *)(sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rela[i].r_offset);
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ Elf32_Sym *sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rela[i].r_info);
+ uint32_t v = sym->st_value + rela[i].r_addend;
+
+ switch (ELF32_R_TYPE(rela[i].r_info)) {
+ case R_H8_DIR24R8:
+ loc = (uint32_t *)((uint32_t)loc - 1);
+ *loc = (*loc & 0xff000000) | ((*loc & 0xffffff) + v);
+ break;
+ case R_H8_DIR24A8:
+ if (ELF32_R_SYM(rela[i].r_info))
+ *loc += v;
+ break;
+ case R_H8_DIR32:
+ case R_H8_DIR32A16:
+ *loc += v;
+ break;
+ case R_H8_PCREL16:
+ v -= (unsigned long)loc + 2;
+ if ((Elf32_Sword)v > 0x7fff ||
+ (Elf32_Sword)v < -(Elf32_Sword)0x8000)
+ goto overflow;
+ else
+ *(unsigned short *)loc = v;
+ break;
+ case R_H8_PCREL8:
+ v -= (unsigned long)loc + 1;
+ if ((Elf32_Sword)v > 0x7f ||
+ (Elf32_Sword)v < -(Elf32_Sword)0x80)
+ goto overflow;
+ else
+ *(unsigned char *)loc = v;
+ break;
+ default:
+ pr_err("module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rela[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+ overflow:
+ pr_err("module %s: relocation offset overflow: %08x\n",
+ me->name, rela[i].r_offset);
+ return -ENOEXEC;
+}
diff --git a/arch/h8300/kernel/sim-console.c b/arch/h8300/kernel/sim-console.c
new file mode 100644
index 0000000..a15edf0
--- /dev/null
+++ b/arch/h8300/kernel/sim-console.c
@@ -0,0 +1,79 @@
+/*
+ * arch/h8300/kernel/early_printk.c
+ *
+ * Copyright (C) 2009 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+static void sim_write(struct console *co, const char *ptr,
+ unsigned len)
+{
+ register const int fd __asm__("er0") = 1; /* stdout */
+ register const char *_ptr __asm__("er1") = ptr;
+ register const unsigned _len __asm__("er2") = len;
+
+ __asm__(".byte 0x5e,0x00,0x00,0xc7\n\t" /* jsr @0xc7 (sys_write) */
+ : : "g"(fd), "g"(_ptr), "g"(_len));
+}
+
+static struct console sim_console = {
+ .name = "sim_console",
+ .write = sim_write,
+ .setup = NULL,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static char sim_console_buf[32];
+
+static int sim_probe(struct platform_device *pdev)
+{
+ if (sim_console.data)
+ return -EEXIST;
+
+ if (!strstr(sim_console_buf, "keep"))
+ sim_console.flags |= CON_BOOT;
+
+ register_console(&sim_console);
+ return 0;
+}
+
+static int sim_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver sim_driver = {
+ .probe = sim_probe,
+ .remove = sim_remove,
+ .driver = {
+ .name = "h8300-sim",
+ .owner = THIS_MODULE,
+ },
+};
+
+early_platform_init_buffer("earlyprintk", &sim_driver,
+ sim_console_buf, ARRAY_SIZE(sim_console_buf));
+
+static struct platform_device sim_console_device = {
+ .name = "h8300-sim",
+ .id = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &sim_console_device,
+};
+
+void __init sim_console_register(void)
+{
+ early_platform_add_devices(devices,
+ ARRAY_SIZE(devices));
+}
diff --git a/arch/h8300/kernel/syscalls.c b/arch/h8300/kernel/syscalls.c
new file mode 100644
index 0000000..1f9123a
--- /dev/null
+++ b/arch/h8300/kernel/syscalls.c
@@ -0,0 +1,14 @@
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+#define sys_mmap2 sys_mmap_pgoff
+
+asmlinkage int sys_rt_sigreturn(void);
+
+void *_sys_call_table[__NR_syscalls] = {
+#include <asm/unistd.h>
+};
--
2.1.4
next prev parent reply other threads:[~2015-05-08 15:04 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-08 15:04 [PATCH v11 00/19] Re-introduce h8300 architecture Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 01/19] MAINTAINERS: Add H8/300 entry Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 02/19] mksysmap: Add h8300 local symbol pattern Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 03/19] Add ELF machine Yoshinori Sato
[not found] ` <1431097479-21101-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2015-05-08 15:04 ` [PATCH v11 04/19] sh-sci: Add h8300 SCI Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 05/19] asm-generic: Add common asm-offsets.h Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 06/19] h8300: Assembly headers Yoshinori Sato
2015-05-10 10:46 ` Richard Weinberger
2015-05-11 3:30 ` Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 07/19] h8300: UAPI headers Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 08/19] h8300: Exception and Interrupt handling Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 09/19] h8300: kernel booting Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 10/19] h8300: Process and signal Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 11/19] h8300: CPU depend helpers Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato [this message]
2015-05-08 15:04 ` [PATCH v11 13/19] h8300: Memory management Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 14/19] h8300: library functions Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 15/19] h8300: Build scripts Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 16/19] h8300: configs Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 17/19] h8300: clock driver Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 18/19] h8300: clocksource Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 19/19] h8300: devicetree source Yoshinori Sato
2015-05-08 16:50 ` Mark Rutland
2015-05-09 11:19 ` Yoshinori Sato
2015-05-08 18:54 ` [PATCH v11 00/19] Re-introduce h8300 architecture Guenter Roeck
2015-05-09 11:20 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431097479-21101-13-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.