From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v11 08/19] h8300: Exception and Interrupt handling
Date: Sat, 9 May 2015 00:04:28 +0900 [thread overview]
Message-ID: <1431097479-21101-9-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1431097479-21101-1-git-send-email-ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/kernel/entry.S | 414 +++++++++++++++++++++++++++++++++++++++++++++
arch/h8300/kernel/irq.c | 121 +++++++++++++
arch/h8300/kernel/signal.c | 289 +++++++++++++++++++++++++++++++
arch/h8300/kernel/traps.c | 161 ++++++++++++++++++
4 files changed, 985 insertions(+)
create mode 100644 arch/h8300/kernel/entry.S
create mode 100644 arch/h8300/kernel/irq.c
create mode 100644 arch/h8300/kernel/signal.c
create mode 100644 arch/h8300/kernel/traps.c
diff --git a/arch/h8300/kernel/entry.S b/arch/h8300/kernel/entry.S
new file mode 100644
index 0000000..797dfa8
--- /dev/null
+++ b/arch/h8300/kernel/entry.S
@@ -0,0 +1,414 @@
+/*
+ *
+ * linux/arch/h8300/kernel/entry.S
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ * David McCullough <davidm@snapgear.com>
+ *
+ */
+
+/*
+ * entry.S
+ * include exception/interrupt gateway
+ * system call entry
+ */
+
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+
+#if defined(CONFIG_CPU_H8300H)
+#define USERRET 8
+INTERRUPTS = 64
+ .h8300h
+ .macro SHLL2 reg
+ shll.l \reg
+ shll.l \reg
+ .endm
+ .macro SHLR2 reg
+ shlr.l \reg
+ shlr.l \reg
+ .endm
+ .macro SAVEREGS
+ mov.l er0,@-sp
+ mov.l er1,@-sp
+ mov.l er2,@-sp
+ mov.l er3,@-sp
+ .endm
+ .macro RESTOREREGS
+ mov.l @sp+,er3
+ mov.l @sp+,er2
+ .endm
+ .macro SAVEEXR
+ .endm
+ .macro RESTOREEXR
+ .endm
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define USERRET 10
+#define USEREXR 8
+INTERRUPTS = 128
+ .h8300s
+ .macro SHLL2 reg
+ shll.l #2,\reg
+ .endm
+ .macro SHLR2 reg
+ shlr.l #2,\reg
+ .endm
+ .macro SAVEREGS
+ stm.l er0-er3,@-sp
+ .endm
+ .macro RESTOREREGS
+ ldm.l @sp+,er2-er3
+ .endm
+ .macro SAVEEXR
+ mov.w @(USEREXR:16,er0),r1
+ mov.w r1,@(LEXR-LER3:16,sp) /* copy EXR */
+ .endm
+ .macro RESTOREEXR
+ mov.w @(LEXR-LER1:16,sp),r1 /* restore EXR */
+ mov.b r1l,r1h
+ mov.w r1,@(USEREXR:16,er0)
+ .endm
+#endif
+
+
+/* CPU context save/restore macros. */
+
+ .macro SAVE_ALL
+ mov.l er0,@-sp
+ stc ccr,r0l /* check kernel mode */
+ btst #4,r0l
+ bne 5f
+
+ /* user mode */
+ mov.l sp,@_sw_usp
+ mov.l @sp,er0 /* restore saved er0 */
+ orc #0x10,ccr /* switch kernel stack */
+ mov.l @_sw_ksp,sp
+ sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */
+ SAVEREGS
+ mov.l @_sw_usp,er0
+ mov.l @(USERRET:16,er0),er1 /* copy the RET addr */
+ mov.l er1,@(LRET-LER3:16,sp)
+ SAVEEXR
+
+ mov.l @(LORIG-LER3:16,sp),er0
+ mov.l er0,@(LER0-LER3:16,sp) /* copy ER0 */
+ mov.w e1,r1 /* e1 highbyte = ccr */
+ and #0xef,r1h /* mask mode? flag */
+ bra 6f
+5:
+ /* kernel mode */
+ mov.l @sp,er0 /* restore saved er0 */
+ subs #2,sp /* set dummy ccr */
+ subs #4,sp /* set dummp sp */
+ SAVEREGS
+ mov.w @(LRET-LER3:16,sp),r1 /* copy old ccr */
+6:
+ mov.b r1h,r1l
+ mov.b #0,r1h
+ mov.w r1,@(LCCR-LER3:16,sp) /* set ccr */
+ mov.l @_sw_usp,er2
+ mov.l er2,@(LSP-LER3:16,sp) /* set usp */
+ mov.l er6,@-sp /* syscall arg #6 */
+ mov.l er5,@-sp /* syscall arg #5 */
+ mov.l er4,@-sp /* syscall arg #4 */
+ .endm /* r1 = ccr */
+
+ .macro RESTORE_ALL
+ mov.l @sp+,er4
+ mov.l @sp+,er5
+ mov.l @sp+,er6
+ RESTOREREGS
+ mov.w @(LCCR-LER1:16,sp),r0 /* check kernel mode */
+ btst #4,r0l
+ bne 7f
+
+ orc #0xc0,ccr
+ mov.l @(LSP-LER1:16,sp),er0
+ mov.l @(LER0-LER1:16,sp),er1 /* restore ER0 */
+ mov.l er1,@er0
+ RESTOREEXR
+ mov.w @(LCCR-LER1:16,sp),r1 /* restore the RET addr */
+ mov.b r1l,r1h
+ mov.b @(LRET+1-LER1:16,sp),r1l
+ mov.w r1,e1
+ mov.w @(LRET+2-LER1:16,sp),r1
+ mov.l er1,@(USERRET:16,er0)
+
+ mov.l @sp+,er1
+ add.l #(LRET-LER1),sp /* remove LORIG - LRET */
+ mov.l sp,@_sw_ksp
+ andc #0xef,ccr /* switch to user mode */
+ mov.l er0,sp
+ bra 8f
+7:
+ mov.l @sp+,er1
+ add.l #10,sp
+8:
+ mov.l @sp+,er0
+ adds #4,sp /* remove the sw created LVEC */
+ rte
+ .endm
+
+.globl _system_call
+.globl ret_from_exception
+.globl ret_from_fork
+.globl ret_from_kernel_thread
+.globl ret_from_interrupt
+.globl _interrupt_redirect_table
+.globl _sw_ksp,_sw_usp
+.globl _resume
+.globl _interrupt_entry
+.globl _trace_break
+.globl _nmi
+
+#if defined(CONFIG_ROMKERNEL)
+ .section .int_redirect,"ax"
+_interrupt_redirect_table:
+#if defined(CONFIG_CPU_H8300H)
+ .rept 7
+ .long 0
+ .endr
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .rept 5
+ .long 0
+ .endr
+ jmp @_trace_break
+ .long 0
+#endif
+
+ jsr @_interrupt_entry /* NMI */
+ jmp @_system_call /* TRAPA #0 (System call) */
+ .long 0
+ .long 0
+ jmp @_trace_break /* TRAPA #3 (breakpoint) */
+ .rept INTERRUPTS-12
+ jsr @_interrupt_entry
+ .endr
+#endif
+#if defined(CONFIG_RAMKERNEL)
+.globl _interrupt_redirect_table
+ .section .bss
+_interrupt_redirect_table:
+ .space 4
+#endif
+
+ .section .text
+ .align 2
+_interrupt_entry:
+ SAVE_ALL
+/* r1l is saved ccr */
+ mov.l sp,er0
+ add.l #LVEC,er0
+ btst #4,r1l
+ bne 1f
+ /* user LVEC */
+ mov.l @_sw_usp,er0
+ adds #4,er0
+1:
+ mov.l @er0,er0 /* LVEC address */
+#if defined(CONFIG_ROMKERNEL)
+ sub.l #_interrupt_redirect_table,er0
+#endif
+#if defined(CONFIG_RAMKERNEL)
+ mov.l @_interrupt_redirect_table,er1
+ sub.l er1,er0
+#endif
+ SHLR2 er0
+ dec.l #1,er0
+ mov.l sp,er1
+ subs #4,er1 /* adjust ret_pc */
+#if defined(CONFIG_CPU_H8S)
+ orc #7,exr
+#endif
+ jsr @do_IRQ
+ jmp @ret_from_interrupt
+
+_system_call:
+ subs #4,sp /* dummy LVEC */
+ SAVE_ALL
+ /* er0: syscall nr */
+ andc #0xbf,ccr
+ mov.l er0,er4
+
+ /* save top of frame */
+ mov.l sp,er0
+ jsr @set_esp0
+ mov.l sp,er2
+ and.w #0xe000,r2
+ mov.l @(TI_FLAGS:16,er2),er2
+ and.w #_TIF_WORK_SYSCALL_MASK,r2
+ beq 1f
+ mov.l sp,er0
+ jsr @do_syscall_trace_enter
+1:
+ cmp.l #__NR_syscalls,er4
+ bcc badsys
+ SHLL2 er4
+ mov.l #_sys_call_table,er0
+ add.l er4,er0
+ mov.l @er0,er4
+ beq ret_from_exception:16
+ mov.l @(LER1:16,sp),er0
+ mov.l @(LER2:16,sp),er1
+ mov.l @(LER3:16,sp),er2
+ jsr @er4
+ mov.l er0,@(LER0:16,sp) /* save the return value */
+ mov.l sp,er2
+ and.w #0xe000,r2
+ mov.l @(TI_FLAGS:16,er2),er2
+ and.w #_TIF_WORK_SYSCALL_MASK,r2
+ beq 2f
+ mov.l sp,er0
+ jsr @do_syscall_trace_leave
+2:
+ orc #0xc0,ccr
+ bra resume_userspace
+
+badsys:
+ mov.l #-ENOSYS,er0
+ mov.l er0,@(LER0:16,sp)
+ bra resume_userspace
+
+#if !defined(CONFIG_PREEMPT)
+#define resume_kernel restore_all
+#endif
+
+ret_from_exception:
+#if defined(CONFIG_PREEMPT)
+ orc #0xc0,ccr
+#endif
+ret_from_interrupt:
+ mov.b @(LCCR+1:16,sp),r0l
+ btst #4,r0l
+ bne resume_kernel:16 /* return from kernel */
+resume_userspace:
+ andc #0xbf,ccr
+ mov.l sp,er4
+ and.w #0xe000,r4 /* er4 <- current thread info */
+ mov.l @(TI_FLAGS:16,er4),er1
+ and.l #_TIF_WORK_MASK,er1
+ beq restore_all:8
+work_pending:
+ btst #TIF_NEED_RESCHED,r1l
+ bne work_resched:8
+ /* work notifysig */
+ mov.l sp,er0
+ subs #4,er0 /* er0: pt_regs */
+ jsr @do_notify_resume
+ bra resume_userspace:8
+work_resched:
+ mov.l sp,er0
+ jsr @set_esp0
+ jsr @schedule
+ bra resume_userspace:8
+restore_all:
+ RESTORE_ALL /* Does RTE */
+
+#if defined(CONFIG_PREEMPT)
+resume_kernel:
+ mov.l @(TI_PRE_COUNT:16,er4),er0
+ bne restore_all:8
+need_resched:
+ mov.l @(TI_FLAGS:16,er4),er0
+ btst #TIF_NEED_RESCHED,r0l
+ beq restore_all:8
+ mov.b @(LCCR+1:16,sp),r0l /* Interrupt Enabled? */
+ bmi restore_all:8
+ mov.l sp,er0
+ jsr @set_esp0
+ jsr @preempt_schedule_irq
+ bra need_resched:8
+#endif
+
+ret_from_fork:
+ mov.l er2,er0
+ jsr @schedule_tail
+ jmp @ret_from_exception
+
+ret_from_kernel_thread:
+ mov.l er2,er0
+ jsr @schedule_tail
+ mov.l @(LER4:16,sp),er0
+ mov.l @(LER5:16,sp),er1
+ jsr @er1
+ jmp @ret_from_exception
+
+_resume:
+ /*
+ * Beware - when entering resume, offset of tss is in d1,
+ * prev (the current task) is in a0, next (the new task)
+ * is in a1 and d2.b is non-zero if the mm structure is
+ * shared between the tasks, so don't change these
+ * registers until their contents are no longer needed.
+ */
+
+ /* save sr */
+ sub.w r3,r3
+ stc ccr,r3l
+ mov.w r3,@(THREAD_CCR+2:16,er0)
+
+ /* disable interrupts */
+ orc #0xc0,ccr
+ mov.l @_sw_usp,er3
+ mov.l er3,@(THREAD_USP:16,er0)
+ mov.l sp,@(THREAD_KSP:16,er0)
+
+ /* Skip address space switching if they are the same. */
+ /* FIXME: what did we hack out of here, this does nothing! */
+
+ mov.l @(THREAD_USP:16,er1),er0
+ mov.l er0,@_sw_usp
+ mov.l @(THREAD_KSP:16,er1),sp
+
+ /* restore status register */
+ mov.w @(THREAD_CCR+2:16,er1),r3
+
+ ldc r3l,ccr
+ rts
+
+_trace_break:
+ subs #4,sp
+ SAVE_ALL
+ sub.l er1,er1
+ dec.l #1,er1
+ mov.l er1,@(LORIG,sp)
+ mov.l sp,er0
+ jsr @set_esp0
+ mov.l @_sw_usp,er0
+ mov.l @er0,er1
+ mov.w @(-2:16,er1),r2
+ cmp.w #0x5730,r2
+ beq 1f
+ subs #2,er1
+ mov.l er1,@er0
+1:
+ and.w #0xff,e1
+ mov.l er1,er0
+ jsr @trace_trap
+ jmp @ret_from_exception
+
+_nmi:
+ subs #4, sp
+ mov.l er0, @-sp
+ mov.l @_interrupt_redirect_table, er0
+ add.l #8*4, er0
+ mov.l er0, @(4,sp)
+ mov.l @sp+, er0
+ jmp @_interrupt_entry
+
+ .section .bss
+_sw_ksp:
+ .space 4
+_sw_usp:
+ .space 4
+
+ .end
diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c
new file mode 100644
index 0000000..dbe8544
--- /dev/null
+++ b/arch/h8300/kernel/irq.c
@@ -0,0 +1,121 @@
+/*
+ * linux/arch/h8300/kernel/irq.c
+ *
+ * Copyright 2014-2015 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <asm/traps.h>
+
+#ifdef CONFIG_RAMKERNEL
+typedef void (*h8300_vector)(void);
+
+static const h8300_vector __initconst trap_table[] = {
+ 0, 0, 0, 0,
+ _trace_break,
+ 0, 0,
+ _nmi,
+ _system_call,
+ 0, 0,
+ _trace_break,
+};
+
+static unsigned long __init *get_vector_address(void)
+{
+ unsigned long *rom_vector = CPU_VECTOR;
+ unsigned long base, tmp;
+ int vec_no;
+
+ base = rom_vector[EXT_IRQ0] & ADDR_MASK;
+
+ /* check romvector format */
+ for (vec_no = EXT_IRQ0 + 1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) {
+ if ((base+(vec_no - EXT_IRQ0)*4) !=
+ (rom_vector[vec_no] & ADDR_MASK))
+ return NULL;
+ }
+
+ /* ramvector base address */
+ base -= EXT_IRQ0*4;
+
+ /* writerble? */
+ tmp = ~(*(volatile unsigned long *)base);
+ (*(volatile unsigned long *)base) = tmp;
+ if ((*(volatile unsigned long *)base) != tmp)
+ return NULL;
+ return (unsigned long *)base;
+}
+
+static void __init setup_vector(void)
+{
+ int i;
+ unsigned long *ramvec, *ramvec_p;
+ const h8300_vector *trap_entry;
+
+ ramvec = get_vector_address();
+ if (ramvec == NULL)
+ panic("interrupt vector serup failed.");
+ else
+ pr_debug("virtual vector at 0x%p\n", ramvec);
+
+ /* create redirect table */
+ ramvec_p = ramvec;
+ trap_entry = trap_table;
+ for (i = 0; i < NR_IRQS; i++) {
+ if (i < 12) {
+ if (*trap_entry)
+ *ramvec_p = VECTOR(*trap_entry);
+ ramvec_p++;
+ trap_entry++;
+ } else
+ *ramvec_p++ = REDIRECT(_interrupt_entry);
+ }
+ _interrupt_redirect_table = ramvec;
+}
+#else
+void setup_vector(void)
+{
+ /* noting do */
+}
+#endif
+
+extern struct irq_chip h8300_irq_chip;
+static int irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw_irq_num)
+{
+ irq_set_chip_and_handler(virq, &h8300_irq_chip, handle_simple_irq);
+
+ return 0;
+}
+
+static struct irq_domain_ops irq_ops = {
+ .map = irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+void __init init_IRQ(void)
+{
+ struct irq_domain *domain;
+ struct device_node *node;
+
+ setup_vector();
+ h8300_init_ipr();
+
+ node = of_find_compatible_node(NULL, NULL, "renesas,h8300-intc");
+ BUG_ON(!node);
+ domain = irq_domain_add_linear(node, NR_IRQS, &irq_ops, NULL);
+ BUG_ON(!domain);
+ irq_set_default_host(domain);
+ of_node_put(node);
+}
+
+asmlinkage void do_IRQ(int irq)
+{
+ irq_enter();
+ generic_handle_irq(irq);
+ irq_exit();
+}
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
new file mode 100644
index 0000000..380fffd
--- /dev/null
+++ b/arch/h8300/kernel/signal.c
@@ -0,0 +1,289 @@
+/*
+ * linux/arch/h8300/kernel/signal.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * uClinux H8/300 support by Yoshinori Sato <ysato@users.sourceforge.jp>
+ * and David McCullough <davidm@snapgear.com>
+ *
+ * Based on
+ * Linux/m68k by Hamish Macdonald
+ */
+
+/*
+ * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
+ * Atari :-) Current limitation: Only one sigstack can be active at one time.
+ * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
+ * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
+ * signal handlers!
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/highuid.h>
+#include <linux/personality.h>
+#include <linux/tty.h>
+#include <linux/binfmts.h>
+#include <linux/tracehook.h>
+
+#include <asm/setup.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/traps.h>
+#include <asm/ucontext.h>
+
+/*
+ * Do a signal return; undo the signal stack.
+ *
+ * Keep the return code on the stack quadword aligned!
+ * That makes the cache flush below easier.
+ */
+
+struct rt_sigframe {
+ long dummy_er0;
+ long dummy_vector;
+#if defined(CONFIG_CPU_H8S)
+ short dummy_exr;
+#endif
+ long dummy_pc;
+ char *pretcode;
+ struct siginfo *pinfo;
+ void *puc;
+ unsigned char retcode[8];
+ struct siginfo info;
+ struct ucontext uc;
+ int sig;
+} __packed __aligned(2);
+
+static inline int
+restore_sigcontext(struct sigcontext *usc, int *pd0)
+{
+ struct pt_regs *regs = current_pt_regs();
+ int err = 0;
+ unsigned int ccr;
+ unsigned int usp;
+ unsigned int er0;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+ /* restore passed registers */
+#define COPY(r) do { err |= get_user(regs->r, &usc->sc_##r); } while (0)
+ COPY(er1);
+ COPY(er2);
+ COPY(er3);
+ COPY(er5);
+ COPY(pc);
+ ccr = regs->ccr & 0x10;
+ COPY(ccr);
+#undef COPY
+ regs->ccr &= 0xef;
+ regs->ccr |= ccr;
+ regs->orig_er0 = -1; /* disable syscall checks */
+ err |= __get_user(usp, &usc->sc_usp);
+ wrusp(usp);
+
+ err |= __get_user(er0, &usc->sc_er0);
+ *pd0 = er0;
+ return err;
+}
+
+asmlinkage int sys_rt_sigreturn(void)
+{
+ unsigned long usp = rdusp();
+ struct rt_sigframe *frame = (struct rt_sigframe *)(usp - 4);
+ sigset_t set;
+ int er0;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ set_current_blocked(&set);
+
+ if (restore_sigcontext(&frame->uc.uc_mcontext, &er0))
+ goto badframe;
+
+ if (restore_altstack(&frame->uc.uc_stack))
+ goto badframe;
+
+ return er0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+static int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+ unsigned long mask)
+{
+ int err = 0;
+
+ err |= __put_user(regs->er0, &sc->sc_er0);
+ err |= __put_user(regs->er1, &sc->sc_er1);
+ err |= __put_user(regs->er2, &sc->sc_er2);
+ err |= __put_user(regs->er3, &sc->sc_er3);
+ err |= __put_user(regs->er4, &sc->sc_er4);
+ err |= __put_user(regs->er5, &sc->sc_er5);
+ err |= __put_user(regs->er6, &sc->sc_er6);
+ err |= __put_user(rdusp(), &sc->sc_usp);
+ err |= __put_user(regs->pc, &sc->sc_pc);
+ err |= __put_user(regs->ccr, &sc->sc_ccr);
+ err |= __put_user(mask, &sc->sc_mask);
+
+ return err;
+}
+
+static inline void __user *
+get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size)
+{
+ return (void __user *)((sigsp(rdusp(), ksig) - frame_size) & -8UL);
+}
+
+static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
+ struct pt_regs *regs)
+{
+ struct rt_sigframe *frame;
+ int err = 0;
+ unsigned char *ret;
+
+ frame = get_sigframe(ksig, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ return -EFAULT;
+
+ if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+ err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __save_altstack(&frame->uc.uc_stack, rdusp());
+ err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
+ err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+ if (err)
+ return -EFAULT;
+
+ /* Set up to return from userspace. */
+ ret = frame->retcode;
+ if (ksig->ka.sa.sa_flags & SA_RESTORER)
+ ret = (unsigned char *)(ksig->ka.sa.sa_restorer);
+ else {
+ /* sub.l er0,er0; mov.b #__NR_rt_sigreturn,r0l; trapa #0 */
+ err |= __put_user(0x1a80f800 + (__NR_rt_sigreturn & 0xff),
+ (unsigned long *)(frame->retcode + 0));
+ err |= __put_user(0x5700,
+ (unsigned short *)(frame->retcode + 4));
+ }
+ err |= __put_user(ret, &frame->pretcode);
+
+ if (err)
+ return -EFAULT;
+
+ /* Set up registers for signal handler */
+ wrusp((unsigned long) frame);
+ regs->pc = (unsigned long) ksig->ka.sa.sa_handler;
+ regs->er0 = ksig->sig;
+ regs->er1 = (unsigned long)&(frame->info);
+ regs->er2 = (unsigned long)&frame->uc;
+ regs->er5 = current->mm->start_data; /* GOT base */
+
+ return 0;
+}
+
+static void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka)
+{
+ switch (regs->er0) {
+ case -ERESTARTNOHAND:
+ if (!ka)
+ goto do_restart;
+ regs->er0 = -EINTR;
+ break;
+ case -ERESTART_RESTARTBLOCK:
+ if (!ka) {
+ regs->er0 = __NR_restart_syscall;
+ regs->pc -= 2;
+ } else
+ regs->er0 = -EINTR;
+ break;
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->er0 = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+do_restart:
+ regs->er0 = regs->orig_er0;
+ regs->pc -= 2;
+ break;
+ }
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+ sigset_t *oldset = sigmask_to_save();
+ int ret;
+ /* are we from a system call? */
+ if (regs->orig_er0 >= 0)
+ handle_restart(regs, &ksig->ka);
+
+ ret = setup_rt_frame(ksig, oldset, regs);
+
+ signal_setup_done(ret, ksig, 0);
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+static void do_signal(struct pt_regs *regs)
+{
+ struct ksignal ksig;
+
+ current->thread.esp0 = (unsigned long) regs;
+
+ if (get_signal(&ksig)) {
+ /* Whee! Actually deliver the signal. */
+ handle_signal(&ksig, regs);
+ return;
+ }
+ /* Did we come from a system call? */
+ if (regs->orig_er0 >= 0)
+ handle_restart(regs, NULL);
+
+ /* If there's no signal to deliver, we just restore the saved mask. */
+ restore_saved_sigmask();
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
+{
+ if (thread_info_flags & _TIF_SIGPENDING)
+ do_signal(regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ }
+}
diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c
new file mode 100644
index 0000000..1b2d7cd
--- /dev/null
+++ b/arch/h8300/kernel/traps.c
@@ -0,0 +1,161 @@
+/*
+ * linux/arch/h8300/boot/traps.c -- general exception handling code
+ * H8/300 support Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * Cloned from Linux/m68k.
+ *
+ * No original Copyright holder listed,
+ * Probable original (C) Roman Zippel (assigned DJD, 1999)
+ *
+ * Copyright 1999-2000 D. Jeff Dionne, <jeff@rt-control.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/bug.h>
+
+#include <asm/irq.h>
+#include <asm/traps.h>
+#include <asm/page.h>
+
+static DEFINE_SPINLOCK(die_lock);
+
+/*
+ * this must be called very early as the kernel might
+ * use some instruction that are emulated on the 060
+ */
+
+void __init base_trap_init(void)
+{
+}
+
+void __init trap_init(void)
+{
+}
+
+asmlinkage void set_esp0(unsigned long ssp)
+{
+ current->thread.esp0 = ssp;
+}
+
+/*
+ * Generic dumping code. Used for panic and debug.
+ */
+
+static void dump(struct pt_regs *fp)
+{
+ unsigned long *sp;
+ unsigned char *tp;
+ int i;
+
+ pr_info("\nCURRENT PROCESS:\n\n");
+ pr_info("COMM=%s PID=%d\n", current->comm, current->pid);
+ if (current->mm) {
+ pr_info("TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",
+ (int) current->mm->start_code,
+ (int) current->mm->end_code,
+ (int) current->mm->start_data,
+ (int) current->mm->end_data,
+ (int) current->mm->end_data,
+ (int) current->mm->brk);
+ pr_info("USER-STACK=%08x KERNEL-STACK=%08lx\n\n",
+ (int) current->mm->start_stack,
+ (int) PAGE_SIZE+(unsigned long)current);
+ }
+
+ show_regs(fp);
+ pr_info("\nCODE:");
+ tp = ((unsigned char *) fp->pc) - 0x20;
+ for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
+ if ((i % 0x10) == 0)
+ pr_info("\n%08x: ", (int) (tp + i));
+ pr_info("%08x ", (int) *sp++);
+ }
+ pr_info("\n");
+
+ pr_info("\nKERNEL STACK:");
+ tp = ((unsigned char *) fp) - 0x40;
+ for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
+ if ((i % 0x10) == 0)
+ pr_info("\n%08x: ", (int) (tp + i));
+ pr_info("%08x ", (int) *sp++);
+ }
+ pr_info("\n");
+ if (STACK_MAGIC != *(unsigned long *)((unsigned long)current+PAGE_SIZE))
+ pr_info("(Possibly corrupted stack page??)\n");
+
+ pr_info("\n\n");
+}
+
+void die(const char *str, struct pt_regs *fp, unsigned long err)
+{
+ static int diecount;
+
+ oops_enter();
+
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ report_bug(fp->pc, fp);
+ pr_crit("%s: %04lx [#%d] ", str, err & 0xffff, ++diecount);
+ dump(fp);
+
+ spin_unlock_irq(&die_lock);
+ do_exit(SIGSEGV);
+}
+
+static int kstack_depth_to_print = 24;
+
+void show_stack(struct task_struct *task, unsigned long *esp)
+{
+ unsigned long *stack, addr;
+ int i;
+
+ if (esp == NULL)
+ esp = (unsigned long *) &esp;
+
+ stack = esp;
+
+ pr_info("Stack from %08lx:", (unsigned long)stack);
+ for (i = 0; i < kstack_depth_to_print; i++) {
+ if (((unsigned long)stack & (THREAD_SIZE - 1)) == 0)
+ break;
+ if (i % 8 == 0)
+ pr_info("\n ");
+ pr_info(" %08lx", *stack++);
+ }
+
+ pr_info("\nCall Trace:");
+ i = 0;
+ stack = esp;
+ while (((unsigned long)stack & (THREAD_SIZE - 1)) != 0) {
+ addr = *stack++;
+ /*
+ * If the address is either in the text segment of the
+ * kernel, or in the region which contains vmalloc'ed
+ * memory, it *may* be the address of a calling
+ * routine; if so, print it so that someone tracing
+ * down the cause of the crash will be able to figure
+ * out the call path that was taken.
+ */
+ if (check_kernel_text(addr)) {
+ if (i % 4 == 0)
+ pr_info("\n ");
+ pr_info(" [<%08lx>]", addr);
+ i++;
+ }
+ }
+ pr_info("\n");
+}
+
+void show_trace_task(struct task_struct *tsk)
+{
+ show_stack(tsk, (unsigned long *)tsk->thread.esp0);
+}
--
2.1.4
next prev parent reply other threads:[~2015-05-08 15:04 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-08 15:04 [PATCH v11 00/19] Re-introduce h8300 architecture Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 01/19] MAINTAINERS: Add H8/300 entry Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 02/19] mksysmap: Add h8300 local symbol pattern Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 03/19] Add ELF machine Yoshinori Sato
[not found] ` <1431097479-21101-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2015-05-08 15:04 ` [PATCH v11 04/19] sh-sci: Add h8300 SCI Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 05/19] asm-generic: Add common asm-offsets.h Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 06/19] h8300: Assembly headers Yoshinori Sato
2015-05-10 10:46 ` Richard Weinberger
2015-05-11 3:30 ` Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 07/19] h8300: UAPI headers Yoshinori Sato
2015-05-08 15:04 ` Yoshinori Sato [this message]
2015-05-08 15:04 ` [PATCH v11 09/19] h8300: kernel booting Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 10/19] h8300: Process and signal Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 11/19] h8300: CPU depend helpers Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 12/19] h8300: miscellaneous functions Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 13/19] h8300: Memory management Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 14/19] h8300: library functions Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 15/19] h8300: Build scripts Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 16/19] h8300: configs Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 17/19] h8300: clock driver Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 18/19] h8300: clocksource Yoshinori Sato
2015-05-08 15:04 ` [PATCH v11 19/19] h8300: devicetree source Yoshinori Sato
2015-05-08 16:50 ` Mark Rutland
2015-05-09 11:19 ` Yoshinori Sato
2015-05-08 18:54 ` [PATCH v11 00/19] Re-introduce h8300 architecture Guenter Roeck
2015-05-09 11:20 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431097479-21101-9-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.