From: Rajendra Nayak <rnayak@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@baylibre.com
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
georgi.djakov@linaro.org, svarbanov@mm-sol.com,
srinivas.kandagatla@linaro.org, sviau@codeaurora.org,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v8 09/13] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC
Date: Thu, 6 Aug 2015 16:07:50 +0530 [thread overview]
Message-ID: <1438857474-20262-10-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1438857474-20262-1-git-send-email-rnayak@codeaurora.org>
From: Stephane Viau <sviau@codeaurora.org>
Add the GDSC instances that exist as part of apq8084 MMCC block.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 1 +
drivers/clk/qcom/mmcc-apq8084.c | 86 ++++++++++++++++++++++++++-
include/dt-bindings/clock/qcom,mmcc-apq8084.h | 10 ++++
3 files changed, 96 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index fe00dd6..47b988f 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -17,6 +17,7 @@ config APQ_GCC_8084
config APQ_MMCC_8084
tristate "APQ8084 Multimedia Clock Controller"
select APQ_GCC_8084
+ select QCOM_GDSC
depends on COMMON_CLK_QCOM
help
Support for the multimedia clock controller on apq8084 devices.
diff --git a/drivers/clk/qcom/mmcc-apq8084.c b/drivers/clk/qcom/mmcc-apq8084.c
index 1b17df2..6498eaa 100644
--- a/drivers/clk/qcom/mmcc-apq8084.c
+++ b/drivers/clk/qcom/mmcc-apq8084.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -26,6 +26,7 @@
#include "clk-rcg.h"
#include "clk-branch.h"
#include "reset.h"
+#include "gdsc.h"
enum {
P_XO,
@@ -3077,6 +3078,76 @@ static const struct pll_config mmpll3_config = {
.aux_output_mask = BIT(1),
};
+static struct gdsc venus0_gdsc = {
+ .gdscr = 0x1024,
+ .pd = {
+ .name = "venus0",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc venus0_core0_gdsc = {
+ .gdscr = 0x1040,
+ .pd = {
+ .name = "venus0_core0",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc venus0_core1_gdsc = {
+ .gdscr = 0x1044,
+ .pd = {
+ .name = "venus0_core1",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mdss_gdsc = {
+ .gdscr = 0x2304,
+ .cxcs = (unsigned int []){ 0x231c, 0x2320 },
+ .cxc_count = 2,
+ .pd = {
+ .name = "mdss",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc camss_jpeg_gdsc = {
+ .gdscr = 0x35a4,
+ .pd = {
+ .name = "camss_jpeg",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc camss_vfe_gdsc = {
+ .gdscr = 0x36a4,
+ .cxcs = (unsigned int []){ 0x36a8, 0x36ac, 0x36b0 },
+ .cxc_count = 3,
+ .pd = {
+ .name = "camss_vfe",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc oxili_gdsc = {
+ .gdscr = 0x4024,
+ .cxcs = (unsigned int []){ 0x4028 },
+ .cxc_count = 1,
+ .pd = {
+ .name = "oxili",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc oxilicx_gdsc = {
+ .gdscr = 0x4034,
+ .pd = {
+ .name = "oxilicx",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
static struct clk_regmap *mmcc_apq8084_clocks[] = {
[MMSS_AHB_CLK_SRC] = &mmss_ahb_clk_src.clkr,
[MMSS_AXI_CLK_SRC] = &mmss_axi_clk_src.clkr,
@@ -3294,6 +3365,17 @@ static const struct qcom_reset_map mmcc_apq8084_resets[] = {
[MMSSNOCAXI_RESET] = { 0x5060 },
};
+static struct gdsc *mmcc_apq8084_gdscs[] = {
+ [VENUS0_GDSC] = &venus0_gdsc,
+ [VENUS0_CORE0_GDSC] = &venus0_core0_gdsc,
+ [VENUS0_CORE1_GDSC] = &venus0_core1_gdsc,
+ [MDSS_GDSC] = &mdss_gdsc,
+ [CAMSS_JPEG_GDSC] = &camss_jpeg_gdsc,
+ [CAMSS_VFE_GDSC] = &camss_vfe_gdsc,
+ [OXILI_GDSC] = &oxili_gdsc,
+ [OXILICX_GDSC] = &oxilicx_gdsc,
+};
+
static const struct regmap_config mmcc_apq8084_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -3308,6 +3390,8 @@ static const struct qcom_cc_desc mmcc_apq8084_desc = {
.num_clks = ARRAY_SIZE(mmcc_apq8084_clocks),
.resets = mmcc_apq8084_resets,
.num_resets = ARRAY_SIZE(mmcc_apq8084_resets),
+ .gdscs = mmcc_apq8084_gdscs,
+ .num_gdscs = ARRAY_SIZE(mmcc_apq8084_gdscs),
};
static const struct of_device_id mmcc_apq8084_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,mmcc-apq8084.h b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
index d72b5b3..03861e3 100644
--- a/include/dt-bindings/clock/qcom,mmcc-apq8084.h
+++ b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
@@ -180,4 +180,14 @@
#define VPU_SLEEP_CLK 163
#define VPU_VDP_CLK 164
+/* GDSCs */
+#define VENUS0_GDSC 0
+#define VENUS0_CORE0_GDSC 1
+#define VENUS0_CORE1_GDSC 2
+#define MDSS_GDSC 3
+#define CAMSS_JPEG_GDSC 4
+#define CAMSS_VFE_GDSC 5
+#define OXILI_GDSC 6
+#define OXILICX_GDSC 7
+
#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@codeaurora.org (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 09/13] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC
Date: Thu, 6 Aug 2015 16:07:50 +0530 [thread overview]
Message-ID: <1438857474-20262-10-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1438857474-20262-1-git-send-email-rnayak@codeaurora.org>
From: Stephane Viau <sviau@codeaurora.org>
Add the GDSC instances that exist as part of apq8084 MMCC block.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 1 +
drivers/clk/qcom/mmcc-apq8084.c | 86 ++++++++++++++++++++++++++-
include/dt-bindings/clock/qcom,mmcc-apq8084.h | 10 ++++
3 files changed, 96 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index fe00dd6..47b988f 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -17,6 +17,7 @@ config APQ_GCC_8084
config APQ_MMCC_8084
tristate "APQ8084 Multimedia Clock Controller"
select APQ_GCC_8084
+ select QCOM_GDSC
depends on COMMON_CLK_QCOM
help
Support for the multimedia clock controller on apq8084 devices.
diff --git a/drivers/clk/qcom/mmcc-apq8084.c b/drivers/clk/qcom/mmcc-apq8084.c
index 1b17df2..6498eaa 100644
--- a/drivers/clk/qcom/mmcc-apq8084.c
+++ b/drivers/clk/qcom/mmcc-apq8084.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -26,6 +26,7 @@
#include "clk-rcg.h"
#include "clk-branch.h"
#include "reset.h"
+#include "gdsc.h"
enum {
P_XO,
@@ -3077,6 +3078,76 @@ static const struct pll_config mmpll3_config = {
.aux_output_mask = BIT(1),
};
+static struct gdsc venus0_gdsc = {
+ .gdscr = 0x1024,
+ .pd = {
+ .name = "venus0",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc venus0_core0_gdsc = {
+ .gdscr = 0x1040,
+ .pd = {
+ .name = "venus0_core0",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc venus0_core1_gdsc = {
+ .gdscr = 0x1044,
+ .pd = {
+ .name = "venus0_core1",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mdss_gdsc = {
+ .gdscr = 0x2304,
+ .cxcs = (unsigned int []){ 0x231c, 0x2320 },
+ .cxc_count = 2,
+ .pd = {
+ .name = "mdss",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc camss_jpeg_gdsc = {
+ .gdscr = 0x35a4,
+ .pd = {
+ .name = "camss_jpeg",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc camss_vfe_gdsc = {
+ .gdscr = 0x36a4,
+ .cxcs = (unsigned int []){ 0x36a8, 0x36ac, 0x36b0 },
+ .cxc_count = 3,
+ .pd = {
+ .name = "camss_vfe",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc oxili_gdsc = {
+ .gdscr = 0x4024,
+ .cxcs = (unsigned int []){ 0x4028 },
+ .cxc_count = 1,
+ .pd = {
+ .name = "oxili",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc oxilicx_gdsc = {
+ .gdscr = 0x4034,
+ .pd = {
+ .name = "oxilicx",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
static struct clk_regmap *mmcc_apq8084_clocks[] = {
[MMSS_AHB_CLK_SRC] = &mmss_ahb_clk_src.clkr,
[MMSS_AXI_CLK_SRC] = &mmss_axi_clk_src.clkr,
@@ -3294,6 +3365,17 @@ static const struct qcom_reset_map mmcc_apq8084_resets[] = {
[MMSSNOCAXI_RESET] = { 0x5060 },
};
+static struct gdsc *mmcc_apq8084_gdscs[] = {
+ [VENUS0_GDSC] = &venus0_gdsc,
+ [VENUS0_CORE0_GDSC] = &venus0_core0_gdsc,
+ [VENUS0_CORE1_GDSC] = &venus0_core1_gdsc,
+ [MDSS_GDSC] = &mdss_gdsc,
+ [CAMSS_JPEG_GDSC] = &camss_jpeg_gdsc,
+ [CAMSS_VFE_GDSC] = &camss_vfe_gdsc,
+ [OXILI_GDSC] = &oxili_gdsc,
+ [OXILICX_GDSC] = &oxilicx_gdsc,
+};
+
static const struct regmap_config mmcc_apq8084_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -3308,6 +3390,8 @@ static const struct qcom_cc_desc mmcc_apq8084_desc = {
.num_clks = ARRAY_SIZE(mmcc_apq8084_clocks),
.resets = mmcc_apq8084_resets,
.num_resets = ARRAY_SIZE(mmcc_apq8084_resets),
+ .gdscs = mmcc_apq8084_gdscs,
+ .num_gdscs = ARRAY_SIZE(mmcc_apq8084_gdscs),
};
static const struct of_device_id mmcc_apq8084_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,mmcc-apq8084.h b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
index d72b5b3..03861e3 100644
--- a/include/dt-bindings/clock/qcom,mmcc-apq8084.h
+++ b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
@@ -180,4 +180,14 @@
#define VPU_SLEEP_CLK 163
#define VPU_VDP_CLK 164
+/* GDSCs */
+#define VENUS0_GDSC 0
+#define VENUS0_CORE0_GDSC 1
+#define VENUS0_CORE1_GDSC 2
+#define MDSS_GDSC 3
+#define CAMSS_JPEG_GDSC 4
+#define CAMSS_VFE_GDSC 5
+#define OXILI_GDSC 6
+#define OXILICX_GDSC 7
+
#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2015-08-06 10:39 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-06 10:37 [PATCH v8 00/13] qcom: Add support for GDSCs Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-06 10:37 ` [PATCH v8 01/13] clk: " Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 02/13] clk: qcom: gdsc: Prepare common clk probe to register gdscs Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 03/13] clk: qcom: gdsc: Add support for Memory RET/OFF Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 04/13] clk: qcom: gdsc: Add support for ON only state Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 05/13] clk: qcom: gdsc: Add GDSCs in msm8916 GCC Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 06/13] clk: qcom: gdsc: Add GDSCs in msm8974 GCC Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 07/13] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 08/13] clk: qcom: gdsc: Add GDSCs in apq8084 GCC Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 7:01 ` Stephen Boyd
2015-08-11 7:01 ` Stephen Boyd
2015-08-06 10:37 ` Rajendra Nayak [this message]
2015-08-06 10:37 ` [PATCH v8 09/13] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC Rajendra Nayak
2015-08-11 7:02 ` Stephen Boyd
2015-08-11 7:02 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 10/13] arm: dts: qcom: Add #power-domain-cells property Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:53 ` Stephen Boyd
2015-08-11 6:53 ` Stephen Boyd
2015-08-13 4:24 ` Rajendra Nayak
2015-08-13 4:24 ` Rajendra Nayak
2015-08-14 1:44 ` Stephen Boyd
2015-08-14 1:44 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 11/13] clk: qcom: gdsc: Use PM clocks to control gdsc clocks Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:52 ` Stephen Boyd
2015-08-11 6:52 ` Stephen Boyd
2015-08-13 4:23 ` Rajendra Nayak
2015-08-13 4:23 ` Rajendra Nayak
2015-11-27 8:29 ` Rajendra Nayak
2015-11-27 8:29 ` Rajendra Nayak
2015-12-01 8:59 ` Stephen Boyd
2015-12-01 8:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 12/13] clk: qcom: gdsc: Enable an RCG before turing on the gdsc Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-06 10:37 ` [PATCH v8 13/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438857474-20262-10-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=georgi.djakov@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=svarbanov@mm-sol.com \
--cc=sviau@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.